Is it possible to use an Airport Extreme router with AT&T 2Wire modem/router?

My AT&T 2Wire modem/router does not have great range, speed, or compatibility with my Macbook and iMac. I bought an Apple Airport Extreme to try to remedy my problem, however, I did not realize it was purely a router. Is it possible to use the 2Wire modem/router as just a pure modem and connect it to the Airport Extreme? Would it be more beneficial to purchase a new modem that does not have wireless functionality? I have looked at previous posts but couldn't find any definite answers. Any help will be GREATLY appreciated!! Thanks!

The easiest route to take here would be to simply turn off the wireless function on the 2-Wire modem/router and then configure the AirPort Extreme in Bridge Mode to provide a dual band wireless network.
If the 2-Wire performance shortcomings are the result of other wireless interference issues at your location, unfortunately the AirPort Extreme may not perform any better, wireless wise. It's not possible to know things like this in advance....more of a case of you won't know until you try.
In theory, it might be possible to configure the 2-Wire product as a simple modem...but I doubt that AT&T would be willing to tell you how to do this or provide support in the event of problems.
It's getting to be hard to find a simple DSL modem these days, and even if you do, it will have to be re-configured as a Bridge to work correctly with the AirPort Extreme, so that complicates things as well.

Similar Messages

How can I use an AirPort Extreme to expand a normal Wi-Fi router range?

I used to use my AirPort Extreme as my router, connecting it to an old modem I had. Recently, I had some problems with that modem and had it changed. Now, the new one is also a router, so I decided to use it instead of the AirPort Extreme. However, I don't want to let such an expensive router not doing anything, so I decided I would use it to expand the range of my new router/modem. Is it possible to expand the range of a non-Airport Extreme/Express router, like mine? I tried configuring it to "Expand a network", and it was even in "Bridge Mode", but even with those configurations, it's yellow light kept blinking and AirPort Utility said that it the AirPort Extreme wasn't being able expand the network, and told me to check if the normal router was on and if AirPort Extreme was within its range, and the answer is an obvious yes for both (I can assure you it's within range). Am I doing something wrong, or is it simply not possible?

Is it possible to expand the range of a non-Airport Extreme/Express router, like mine?
Yes, if you connect the AirPort Extreme to one of the LAN <-> ports on the modem/router using a wired Ethernet connection.
Extremely unlikely if you are asking about having the AirPort Extreme connect wirelessly to the modem/router and extend or repeat the signal in that manner.
The reason for this is that Apple designs their routers to only the extend the signal from another Apple router wirelessly.

Is it possible to use the AirPort Extreme wirelessly (without Ethernet cable)

Instead of plugging it directly into my Modem, can I set it up wirelessly?

The AirPort Extreme always needs to connect to a modem using a wired Ethernet connection....as the Setup Guide illustrates.

Is it possible to extend an Airport Extreme Network with a normal router ?

Hi everyone !
I know this question as been asked a lot before, but not in this way, I always saw : How to connect an Airport Extreme/Express to a Normal (D-Link, Linksys, Ect.) Router. What I wan't to do is connect a normal router to my existing Airport Extreme to extend the range of it. I know you can extend the network with an Airport Express, the thing is, i wan't to try with the router I replaced by the Airport Extreme. It's an D-Link DIR-615. If someone know how to do this it will be very nice and helpfull for me! I know on Apple website it says that it's not possible but some people seems to get it to work!
Thanks a lot !
(Sorry for my bad english i'm french Canadien)

You can extend the wireless range of the AirPort with a D-Link or the other way around ... BUT only if the connection between them is wired. This would be the basis of a roaming network. If you must have them interconnected by wireless, then it will NOT work.

(How) can I use my Airport Extreme to send FLAC files/iTunes to my stereo?

(New to this topic.) Is it possible to use my Airport Extreme Base Station to send FLAC and iTunes music files to my (ParaSound P3/A23) stereo system wirelessly?
If so, how?
(Not interested in iOS devices doing this - just, effectively, in using my 'mid-2011' 2.7 iMac (10.7.3) as a music server
TIA!

Yes, add an AirPort Express and convert FLAC to Apple Lossless and iTunes will be able to play them. VLC will not help since you need iTunes to connect to the AirPort Express and VLC will not work with iTunes.
There may be an exception to this but I've never tried it. You could try using AirFoil to connect to the AirPort Express and play your FLAC files that way but I have no guarantee it will work. AirFoil seems very flexible so it may prove to be a solution for you.
I'm not familiar with the Sonos Bridge/Connect system so I cannot comment on the quality. I understand that it is comparable to using the AirPort Express but locking at the price it seems a more expensive solution for your needs.

Can i use an airport extreme card in a powerbook 400MHz ?

i have an older powerbook 400MHz which is second hand and i have no manual for it. does anyone know if i can install an airport extreme card?
powerbook G4 Mac OS X (10.3.9)

wcslingsby, Welcome to the discussion area!
No you can not use an AirPort Extreme card with your PowerBook.
Your PowerBook G4 400 MHz requires the original AirPort card.

Will I be able to use my Airport Extreme model A1143 with Xfinity's ARRIS model TG862G/CT wireless modem? If so, how? I want to keep my airport network setting if possible.

Comcast has been hounding me to upgrade to their newer modem in order to obtain maximum bandwidth with changes they've made. They sent me an ARRIS Wi-Fi modem (model TG862G/CT). I was not expecting the modem to have wireless and would prefer using my Airport Extreme (model A1143). I have not attempted to connect the new ARRIS yet. Should I send the ARRIS back or is there an easy way to make use of it while keeping my Airport Extreme fully functional?

Thanks, I will look up "bridge mode" after I log off here. In the mean time, what if I were to simply buy the newest AE—will I still be able to use "bridge mode"? I imagine Comcast would prefer that I use their equipment and will eventually leave me no choice, but until that happens I would prefer to use Apple's AE. What is your expert take on this?
Any AE will be able to do bridge. There is actually very little difference between your ancient AE and the latest AE in terms of functionality.. Apple is minimalist.. so change can be avoided.. no need to add functions that were always missing.
I was thinking the printers are USB?? Is that incorrect.. are they wireless or ethernet? Any native network printer can be simply connected to any router.. it will perhaps be slightly easier in an Apple environment to use them on an apple router but the difference should not be huge..
USB on the other hand is tricky.. you will need to use some router that allows print serving from USB.. that still works fine whether the AE is bridged or in router mode.
Netflix is no problem either.. (assuming you are not trying to bust a geo-block).. the actual netflix login is stored in the TV.. the only security info on the AE is the wireless connection and that can be swapped to any wireless router. No biggie.. geoblocking is a biggie.. tell me if that is the case.
It is really up to you.
1. Do nothing.. let Comcast squark all they like.. they are still providing you a service you can use. They are not going to cut you off if you still keep paying the bills.
2. Change the modem for the new one they sent.. this involves a lot of network modification .. but in view of the age of the current devices.. will have to happen in the near future regardless.
3. Return the modem router and request a pure modem.. to give you as little network impact as possible. You will simply change old modem for new one. However at some point the Gen1 or 2 AE will die.. and the rest of the network will need updating.. you are putting off d-day. Modern wireless routers have come a long way since Gen1 or 2 AE.
Take your pick.. Bob says 3. I say 2 or 3. It makes little difference as at some point the network needs a refresh.

HT4145 How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? I get a message saying it cannot be extended. Thank you. Arup

How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? As we live in a rural area and our landline broadband speeds are awful, I have moved on to a 3G provider in the UK (EE/Orange) and set up the wireless modem which is working very well with an iMac. I have an Airport Extreme base station which was previously connected with an Ethernet cable to the landline router, and two Airport Express stations as Range Extenders. I would now like to use the Airport Extreme and the two Express stations to extend the range of the Alcatel WiFi device. I have tried automatic and manual set up with the Airport Utility but at the crucial step for selecting a network to extend, although the WiFi device is recognised, I get a message saying it cannot be extended.
Thank you for any help you can provide.
Arup

This is a problem with a lot of cheap end wifi hotspot like devices.. sometimes you can just swap the sim out to a real 3G wireless router.. that is a better approach IMHO than wireless repeater ever will be.
In the meantime..
Have a go with the suggestion.. place the express as wireless bridge. With a computer connected to the wifi from alcatel unit.. (I am amazed Alcatel still are in domestic market.. I thought they sold out). Set the express to join the wifi.. you do this in the airport utility.. old one is easy.. but in v6 you have to trust to luck so to speak and hope the auto setup works.. tell us if you have trouble.
With the Express bridging.. you can then plug it by ethernet into the TC.. which will be in router bridge..
ie
You can then run the connection from wireless or ethernet on the TC.. and it will relay back to the alcatel for internet.. all a bit dodgy but who knows.. it may give you what you need.
Wireless repeater is never particularly reliable in my experience. I would avoid it if possible.

Can I use the AirPort Extreme as a wireless extender to my Time Capsule ?

Can I use AirPort Extreme as a wireless extender ? I own a Time Capsule and want to extend my wireless network using the AirPort Extreme just because both have wifi AC. Also, does the AirPort Extreme need to be hook up via Ethernet if I extend

The problem with extending using a wireless connection between the Time Capsule and AirPort Extreme is this.......
The extender can only "extend" the speed of signal that it receives. The signal starts to lose speed as soon as it leaves the Time Capsule, and the signal will lose quite a bit of speed as it passes through the ceiling due to the thick construction. The ceiling presents what is known as "interference" to the wireless signal.
So, the signal has slowed somewhat by the time that it reaches an AirPort Extreme that would be installed on the main floor. That AirPort Extreme acting as an extender can make the signal that it receives go further, but it cannot make it go faster. A better term than "extender" really might be "repeater".
If you install an AirPort Extreme on the main floor, the signal upstairs will be stronger than it is now, and depending on how many obstructions there are between the AirPort Extreme and the upstairs area, the signal may be noticeably faster upstairs than it is now as well.
With wireless connections between devices, there are always so many compromises and variables involved that it is just not possible to predict what the actual performance might be in your home until you try things out in your home. For that reason, it is always a good idea to understand the store's return policy in advance in case a new item does not deliver the performance that you are hoping to achieve.
Now, let's say that you are able to pull an Ethernet cable from the Time Capsule to the main floor, and the AirPort Extreme is connected there in a nice, central location. Then, you could expect to receive about the same performance on the main floor that you receive in the basement, since the AirPort Extreme is receiving a full speed signal over the Ethernet cable from the Time Capsule. You can run an Ethernet cable about 330 feet, or about 100 meters with virtually no signal loss.
The performance upstairs will improve as well, since the AirPort Extreme has a full speed signal to broadcast....not the slower speed signal that would receive from the Time Capsule if it connects using wireless.
If you want to achieve the same type of performance upstairs that you have in the basement and main floor, then you will need to pull an additional Ethernet cable up to the upstairs floor and add another AirPort there.
That would probably be the "best" wireless network system that you could install if you are looking at all the options. Few of us are lucky enough to be able to install the "best" network, but those that are receive remarkable wireless performance in return for their investment.

Using DHCP Airport Extreme WRONG IP ADDY

I connect my modem directly to my computer and the internet works perfectly.
I try and use my Airport Extreme using DHCP and my Airport Extreme ALWAYS automatically picks an INVALID IP address.
I have no idea why the Airport Extreme is doing this.

When changing network configurations, it is always a good idea to do a complete power recycle of all of your network components.
Try the following, in order, checking for Internet access after each step, until resolved:
1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
3. Perform a complete power recycle of your network components as follows:
Modem/Router Power Recycling - Quick
o Power-off the modem, 802.11n AirPort Extreme Base Station (AEBSn), & computer(s); Wait at least 5 minutes.
o Power-on the modem; Wait at least 5 minutes.
o Power-on the AEBSn; Wait at least 5 minutes.
o Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
o Power-off the modem, AEBSn, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
o Power-on the modem; Wait at least 15 minutes.
o Power-on the AEBSn; Wait at least 5 minutes.
o Power-on the computer(s)
4. Contact your ISP to have them perform a "modem reset."

Can I use my Airport Extreme as a wireless bridge?

Can I use my Airport Extreme as a wireless bridge?

When you say "wireless bridge", I assume that you want the AirPort Extreme to receive a wireless signal and provide an Ethernet output, correct?
If you have another Apple router providing your "main" wireless network, the AirPort Extreme could possibly be configured to "Extend a wireless network".
In that setting, the Extreme provides more wireless coverage and Ethernet ports are enabled, so you could connect an Ethernet device that way.
But, the AirPort Extreme cannot do this with a product from another manufacturer.
So, in order to answer your question specifically, can you provide the make and model number of your "main" router?

Using my airport extreme with another wireless device to hook up direct tv

can i use my airport extreme and access my wireless router, so that i can hook up my directv box?

Is your intent to provide Internet access to the DirectTV box via an Ethernet connection between the box and the AirPort Extreme Base Station? If so, it the other wireless router another AirPort or Time Capsule? If not, then this would not be possible unless you will be connecting the Extreme to the other router by Ethernet.

How do I use my airport extreme with my FIOS router?

How do I use my AirPort Extreme base station with my FIOS Router to extend my network? I have hard disks connected to my AirPort Extreme and would lik to access them.

Probably can't answer all your questions - but.... I use a Linksys (wired and wireless) router as my primary entry point for FIOS. I use a Time Capsule and an Airport Express as a common wireless connection. So I have two visibile wireless networks and use them both depending on where I am in the house. Both the TC and AEx can be seen either wirelessly or wired from the entire network. Note - the Linksys provides all the DHCP - you set the apple routers as "bridge mode."

HT5022 How do i use my airport extreme to extend my wireless network, or make the signal stronger

I have a wireless modem/router and want to use my airport extreme to strengthen the signal throughout my house...how do i do that?

Plan to establish a permanent Ethernet cable connection from one of the available LAN <-> ports on your modem/router to the WAN "O" port on the AirPort Extreme. Locate the AirPort Exteme in a central location in the general area where more wireless coverage is desired.
Configure the AirPort Extreme using AirPort Utility to "create" a wireless network using the exact same wireless network name, same exact wireless security settings and same exact password that your modem/router uses.
Finally, the Extreme must be configured in Bridge Mode to operate correctly with the modem/router.
To get everything in the proper sequence on the network....once the Extreme is configured, power off the entire network for a few minutes. Then start the modem/router first and let it run a minute by itself. Then start the Exteme next the same way. Continue starting devices the same way until the entire network is back up.

Silly question, maybe. I want to change from Verizon DSL to cable, but cable company doesn't supply router. can I use my Airport Extreme as wireless router?

We currently have the following wireless home-network configuration, powered by Verizon DSL.
2 macbook pro’s
1 emachine
HP PhotoSmart 6122 all-in-one printer
Apple TV
Apple Airport Extreme Base Port A 1408
Westell 7500 router
Thinking I’d get wider wireless coverage throughout my 2 bedroom home, I purchased the Airport Extreme. It is connected to the router via its sole usb port. The result was only a tiny increase in speed, and no increase in coverage, so I don’t know why I have it.
We now want to change from DSL to cable, thus ditching Verizon. Our new cable provider supplies the cable box, but no router for wireless networking.
Here are my questions.
Can I use the Airport Extreme (AE) as a wireless router?
If so, how should I hook it up? Should the usb cable go from the AE to the cable box, and all the other devices connect wirelessly?
If not, how should I be using the AE to some advantage? What can I get out of the investment?
Thank you very much for your help! Beatriz

What I wrote has nothing to do with what the cable company charges for their installation. And, usually they will help with the router setup even if you supply your own router. I don't know what they will charge for the modem.
Note that you need to get just a modem. You don't want a modem/router combination. That will make using an AEBS effectively nearly impossible. You will need to ask specifically for just a standalone modem, and that you will supply your own router.

Is it possible to use an Airport Extreme router with AT&T 2Wire modem/router?

Similar Messages

Maybe you are looking for