Is it possible to use an image as the "base" of a mapviewer?

Hi,
I am trying to use a jpg image as the "base" of a mapviewer. After Insert the image, I create a "georaster theme" for it. Then, I create a "base map" by using the georaster theme created in the previous step. Up till now, both "georaster theme" and "base map" can be preview normally. After that, I create a "title layer" by using the "base map" which I created. However, only a write rectangle shown up when I preview the "title layer".
So, I wonder it is possible to make a map by using an image as it base? If yes, would you mind telling me how to make it done. And, what value should I input for the following parameter:
a) When I import an image in mapbuilder:
1) Top X coordinate , Top Y coordinate
2) X resolution, Y resolution
b) When I make a title layer:
1) Max X , Min X, Max Y, Min Y
2) Zoom in scale (Once I zoom in the image, the image is gone?? It's very strange)
Here's the property of that image:
Dimension = 288 * 175
Width = 288 pixels
Height = 175 pixels
Horizontal resolution = 72 dpi
Vertical resolution = 72 dpi

iMacs late 2009 or newer can be used in Target display
mode.  Any older, no can do.
The only other way is via network Screen Sharing or
some otherVPN network like solution.  The issue here
though is that video performance will be pretty severely
hampered.

Similar Messages

  • Is it possible to use an iMac as the display for a Mac mini?

    Is it possible to use an iMac as the display for a Mac mini?

    iMacs late 2009 or newer can be used in Target display
    mode.  Any older, no can do.
    The only other way is via network Screen Sharing or
    some otherVPN network like solution.  The issue here
    though is that video performance will be pretty severely
    hampered.

  • IS O&G - is it possible to use MPL without activating the ECC- DIMP?

    Hi
    We are an Oil and Gas industry and activated IS oil and gas in ECC6.0, our requirement is to use functionality such as Master Parts list which is there in ECC-DIMP under configuration control, as some companies within same group where MPL is required .
    The question is it possible to use MPL without activating the ECC- DIMP
    Request you to please help us to understand.
    Regards

    Hi Venkat,
    If a report is created over a DSO, it pulls data from the active table of a DSO. So as suggested in all the posts above it is not possiable to report on the DSO without activating it.
    Activation of DSO only allows to generate SID's to link transaction data and master data, SID's could also be generated at the time of reporting (When the report fetches data from BI server, but for the SID generation data is needed in active table). Also activation checks the correctness of data etc.
    Could you please let know why you want to report on the unactive request, is it having some problem with activation?
    Regards,
    Pankaj

  • Is it possible to use some product on the unix server at the development level which would make it p

    Hello,
    We are generating editable PDF forms from the scratch at the development level on the unix server. Is it possible to use some product on the unix server at the development level which would make it possible to save these editable PDF forms to be saved using acrobat reader? These forms are used by the end users and the edited files are then saved... Kindly help me in this regard..
    Best Regards,
    Deepak

    Dear Aandi,
    I am really thankful to you for this. I will suggest this to the business and then they can contact adobe for this. Thanking you once again for providing me with all the valueable info. You have been instrumental in helping me out in my project.
    Best Regards,
    Deepak Goyal

  • Is it possible to use virtual chars in the aggregation level?

    Hello,
    Is it possible to use virtual chars in the aggregation level?
    thanks

    Hi.
    See answer of Mr. Gregor Dieckmann in [this topic |BI-IP: Copy planning function from virtual key figure;about virtual KF.
    Regards.

  • Is it possible to use NUMCHARS to display the number of characters in a block of text instead of the whole document? How?

    Is it possible to use NUMCHARS to display the number of characters in a block of text instead of the whole document? How?

    Getting the character count for a paragraph is trivial:
    Sub NumChars1()
    MsgBox Selection.Paragraphs(1).Range.Characters.Count
    End Sub
    Even outputting it to the document is trivial:
    Sub NumChars2()
    With Selection.Paragraphs(1)
      .Range.InsertAfter .Range.Characters.Count
    End With
    End Sub
    The real issue comes when you want to update the document. If the destination paragraph is only ever empty or contains the character count of the previous paragraph, you could use:
    Sub NumChars3()
    With Selection.Paragraphs(1)
      .Next.Range.Text = .Range.Characters.Count & vbCr
    End With
    End Sub
    Cheers
    Paul Edstein
    [MS MVP - Word]

  • Is it possible to use 2 displays with the mac mini

    is it possible to use 2 displays with the mac mini

    I wanted an extended desktop using 2 monitors.
    I am using a Dell Ultrasharp ( has 1 VGA and 1 DVI-D) and a LG W2286 (has 2 HDMI, 1 DVI-D and 1 VGA)
    I ran into a similar issue where initially the mac would not detect the 2 displays and I thought I would share my solution.  I have a Mac Mini 10.8.2 i7 Late 2012.
    I bought a "Cable Matters" brand Mini Display Port | Thunderbolt to DVI Male Cable to have dual monitors.
    I am also using the included in the box  HDMI to DVI-D Adapter from Apple.
    Initial configuration was:
    Mini-Display (Thunderbolt connector) to DVI connected to the LG DVI-D input.
    Apple HDMI to DVI Dongle connected to the Dell DVI-D input.
    What happened was that my desktop was on the LG clear as day but OSX did not see the dell monitor.
    I called apple support and they could not figure out why the mini cant see the dell monitor. I think I discovered that the mac mini could not support 2 dvi monitors.
    I switched the monitor connections.
    The connections that works:
    HDMI out to HDMI in on the LG using a standard HDMI cable.
    Display port | Thunderport to DVI-D on the Dell's DVI-D in.

  • Is it possible to use PCI-1200 on the DAQ Signal Accessory?

    Is it possible to use PCI-1200 on the DAQ Signal Accessory? The documentation for the Daq signal accessory did not mention explicitly whether it
    supports the PCI-1200 specifically or not?

    Hi,
    Yes, you can. According to the manual, the DAQ Signal Accessory is compatible with Lab / 1200 series devices -- this includes the PCI-1200 card.
    Regards,
    RamziH.

  • Possible to capture an image if the button on the cam is clicked?

    Hi!
    Im testing JMF and wonder if anybody knows if it is possible to capture click events from the web camera? The web camera itself has a button made to capture images and I'd like this feature in my application. All I wonder is if it's possible to capture or in any other way access information when ever this button is clicked.
    Thx in advance!
    /Anders

    You could use linux easily.
    Check dmesg, after you push the button.
    Allyou have to do is capture the event.
    In windows, you would probably have to do some jni.

  • Can you use two images in the "flip" transition?

    I want to use the flip transition to show Image 1 spinning and turning into Image 2. Is there an easy way to do this? Thanks.

    The flip transition flips the whole slide rather than fliping the image on the slide. The effect is more like a page turn than a "flip"
    this is an exaple using a shape, but it will work with any object on the page if sized and positioned correctly
    place the image on the first slide
    duplicate the image
    paste it on the second slide
    change the colour of the shape
    set the transition on the first slide to Flip in     Inspector > Transitions

  • How do I use Flickr images in the Color Extraction feature? How do I browse?

    From the camera mode, tap on the image icon in the lower left corner of the app. From there, select Flickr in the options menu. You can use the search box to search Flickr for the type of image you are looking for. Browse the results and tap the image to download it to be used for color extraction.

    The Java Advanced Imaging API would seem to have some classes for working with .tiff images.
    http://java.sun.com/products/java-media/jai/forDevelopers/jai-apidocs/

  • How to use different images in the Table of Contents?

    Hello everyone, I am creating an iBook about Architecture and I would like to have different images for each Chapter in the Table of Contents... But when I add an image it automatically appears on all the other chapters, too. What am i doing wrong?

    You drag the image to the screen and it replaces the placeholder image.
    When you hover over the current image, don't you get the message "this is a placeholder . . ." under your mouse pointer?
    I think the documentation states that the new image must be jpg or png, but a Photoshop image seems to work too.
    In portrait mode, only one image shows at the top of the list of chapters, and that can be changed too.
    But in landscape mode, all of the separate chapter images can be accessed by clicking the littel dots at the bottom of the screen when at the TOC page.

  • Can it be possible to use SUM twice for the same internal table

    Hi Guru,
    my requirement is follewing.
    I need to use a SUM for the same internal twice. 
    itab.
    first : like SUM  will sum up all the value
    and second like
    if  wa_tab-field = ' S'
    sum.
    ...some logic
    else  if wa_tab-field = h
    some logic
    endif.
    can i use  SUM in above way.
    Many thanks,
    Anuj.

    Hi,
    yes it could be use multiple time.
    Here example.
    sort GT_COLLECTHI by atnam ATWRT.
      loop at GT_COLLECTHI into gs_collecth.
        at end of ATWRT.
          sum.
          append gs_collecth to gt_collecth.
          clear:gs_collecth.
          sum.
        endat.
        at end of ATNAM.
          sum.
          append gs_collecth to gt_collecth.
          clear:gs_collecth.
          sum.
        endat.
      endloop.
    Thank you
    Jan

  • Can we limit the search count in Webcenter Imaging on the basis of user/grp

    Hi All
    I have a scenario wherein i want to limit the search count in Webcenter Imaging 11g on the basis of user and group.
    For e.g if administrator searches for documents it should return all the search result, whereas when a noraml business user searches for the document only 1000 documents should be returned as search results(if exact search criteria is not met).
    I am aware of the General setting in Enterprise Manager, but i want to restrict it on the basis of user.
    Can somebody help me, it's really very urgent.
    Thanks
    ACM

    Hi
    This is very important and i am not able to figure a way out of this.
    Is this a Product Feature and can not be altered?
    Please help
    Regards
    ACM

  • Is it possible to use sliced images with fluid grids CS6?

    I have 2 sliced images that I want to use in my page. The site has been designed with fluid grids CS6. As soon as the page is made smaller 1 of the images shrinks while the other remains the same size. Is there any way to make this work or is it just not possible using fluid grids?

    There's nothing on this page.
    http://www.lavishvegas.com/las_vegas_barsx.html
    If you want images to rescale to device width, the parent container must be fluid (% width). 
    The images need a CSS max-width of 100%. DW does this for you when you create a Fluid Grid layout. 
    Also, the native image must be inserted into the HTML foreground  with no stated height or width attributes.  If you set the height/width, it won't rescale to viewport width.
    Working example:
    http://alt-web.com/FluidGrid/Fluid2.html
    Nancy O.

Maybe you are looking for