Is it possible to use Aperture to make a new image from two existing ones--ie, in a new jpg? I essentially want to create a collage that I can then print as a single image, rather than in a book. Any advice will be most welcome!

Is it possible to use Aperture to make a new jpg from two existing ones? I'd essentially like to create a photo collage (without using existing templates) that I can then print as a single image, rather than in a book. Any advice will be most welcome! Thanks.

https://discussions.apple.com/message/15678716#15678716
(Added)
The main point is that Aperture is used to make digital negatives as good as they can be (for the uses you define), but it does not ADD date to your digital negatives, nor does it produce NEW combination files. For those tasks you need a Graphics program.
Message was edited by: Kirby Krieger

Similar Messages

I am using Aperture to make a photo book. I have about 400 photos in the project. I am able to select the photos I want for 20 pages, then when I try to add a page, all the pictures are selected. How do I add additional pages and still control the pix

I am using Aperture to make a photo book. I have about 400 photos in the project that I am selecting from. I want to use about 70 for the book. I am allowed to pick and choose photos until I fill 20 pages. Then when I select add page, I am allowed to select all the pictures in the project. I am not allowed to select. I think I hve to change a setting, bt what? Thanks for the help.

. I am not allowed to select. I think I hve to change a setting, bt what?
David, have you enabled the "Autoflow" options? There are settings behind the cogwheel, that will automatically place unused images onto new pages. If you only want to select a few images from a large project, disable these two options:
Or start your book froman album, that only contains a selection of your images, rather than from the whole project.
Reagrds
Léonie

Is it possible to use Lightroom to make StopMotion? In particular: onionskinning....

Is it possible to use Lightroom to make StopMotion?
In particular: is it possible, while snapping a photo, to see the last one in onionskinning?
thank you!

After you have the photos imported you can also work in a "Folder Mode".
Lr will display your folders and images in the folders - similarly to Bridge.
The folders will be displayed in the Library Module (Grid View or Loupe View) on the left side in the Folders panel.
In the other Modules (Develop, Book, Slideshow, Print, Web) the Folders Panel is not displayed.

Is it possible to use a still frame as a picture from a video you have recorded on an iphone 4?

Is it possible to use a still frame as a picture from a video you have recorded on an iphone 4?
Message was edited by: derekfromco kildare

Might need a little more information here. Are you trying to obtain screen captures? If all you're wanting to do is take stills from your videos then the answer is yes, you can but you'll have to transfer your videos from your iPhone to your computer first (unless you can find an APP on the iTunes store to help you to do it on your iPhone).
There are a few ways to do it. The first is that you can use the button on your keyboard called "Prt Scr" or "Print Screen". This takes a shot of your screen which you can then "paste" into a program like paint, or photoshop or even Word to then save as a jpeg image. When using this option a good trick is to use "Alt" + "Prt Scr" to only capture the current window rather than your entire desktop.
The other way to obtain screenshots is to download and install a program designed to do this for you. A great site to find something free to help you out is www.tucows.com. Try this link: http://www.tucows.com/search.html?search_scope=win&search_terms=screenshot&searc h_type=all
Also, some DVD programs have this function in built in them so it's a good idea to explore what's already installed on your computer.
Hope this helps!

I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?

I want to know how to backup my library to a fixed backup drive rather than to a CD or DVD. I mostly have audiobooks in the library and my computer is running out of space. There are so many that copying them to a CD or DVD would be a horrendous waste of

I want to know how to backup my library to a fixed backup drive rather than to a CD or DVD. I mostly have audiobooks in the library and my computer is running out of space. There are so many that copying them to a CD or DVD would be a horrendous waste of time and resources. Can you please help me?

msscott69 wrote:
I want to know how to backup my library to a fixed backup drive
Copy your ENTIRE iTunes FOLDER to an External Drive...
Full Details Here > http://support.apple.com/kb/HT1751
Also... Have a look at these 2 Videos...
http://macmost.com/moving-your-itunes-library.html
http://macmost.com/moving-your-itunes-media-to-an-external-drive.html

Can i manage ibook collections on itunes, rather than on the ipad

can i manage ibook collections on itunes, rather than on the ipad.

did you mean, iTunes Store and then Books? thats the only thing i can find (following your notes above).
what I am trying to do is add PDF documents to iBooks and organise them into collections.
however, i have found a work around:
1. transfer the PDFs to the library (they go into Books automatically)
2. highlight/select the PDFs that I want to group
3. right click, get info, info tab
4. create a Genre.
doing this method creates categories. not as good as collections, but this will do for now.
if anyone can tell me how to create collections for iBooks (using iTunes - not iBooks on the iPad); please reply.
thanks anyway.

HT5361 Can mail preview be diplayed on bottom rather than side

Can mail preview be diplayed on bottom rather than side

Hi tdenoia,
Welcome to the Support Communities!
The article below explains some viewing options for Mail.
Most of these changes can be made by choosing Mail in the menu bar, choosing Preferences, and then selecting the Viewing command on the toolbar.
Mail (Mountain Lion): View messages
http://support.apple.com/kb/PH11705
Mail > Preferences, click Viewing
To see the Preview on the bottom of the screen, choose the "Classic" layout option.
Resize the message preview
You can increase or decrease the area in which a message is displayed, or hide that area and show only the message list.
Resize the message preview:
Drag the separator bar left or right.
Show or hide the message preview:
Double-click the separator bar.
I hope this information helps ....
Happy Holidays!
- Judy

How can I use slideshows that I have created in Aperture 3 (complete with captions and music tracks) in my DVD through iDVD version 7.1.2 ? iDVD Manuals that I have read seem to avoid explaining that export process. Any advice will be greatly appreciate

How can I use slideshows that I have created in Aperture 3 (complete with captions and music tracks) in my DVD through iDVD version 7.1.2 ? iDVD Manuals that I have read seem to avoid explaining that export process. I'm using Aperture 3, Mac OS X (10.7.5), on a Any advice will be greatly appreciated. Anthony Zasadney, Bolingbrook IL.

Export the slideshow from Aperture as a .mov file and import it into iDVD.

How do I get iCal to sync to my iphone 4. It used to work and now it won't. Any suggestions will be most appreciated.

How do I get iCal on my Mac to sync with my iphone 4.
It used to work and now it doesn't.
I am not on MobileMe or the Cloud.
Any suggestions will be most appreciated.

Hi Arezzo
I'm asuming you are using iTunes then to sync? this can be done over WiFi or the USB cable.
Review your setting for the calendar sync once iTunes is open and your iPhone is connected. Make sure your Calendars are selected to sync that you need. By default all calendars will.
So the option i have for you is to reset the sync service and this will reset those settings in iTunes. Meaning that you will have to switch them on again in iTunes to sync. But this mostly clears unresolved sync issues.
Please do yourself a favour and hit backup in iTunes before doing any testing. iTunes will then keep a local backup of your iPhone in case of any data loss.
{added}
open Terminal from your Utilities folder and paste this command in to reset. OS X 10.6 - 10.8
/System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync .pl full [press Enter]
if it prompts for a password, just type your password and hit [Enter] again.
Open iTunes then set your syncs up and it should then carry on again.
Message was edited by: WaldoWTM

A few months ago, I purchased a new iMac. I recently created a movie using iMovie. Then I found out that iDVD is not included. So I have the problem that I want to burn a movie that I can play on my DVD player and watch on a television. i rang Applecare a

A few months ago, I purchased a new iMac. I recently created a movie using iMovie. Then I found out that iDVD is not included. So I have the problem that I want to burn a movie that I can play on my DVD player and watch on a television. I rang Applecare and was told that I need a program called BURN.
Is this correct? I can export the movie from iMovie in a m4v format, but I think I need to convert this to iso format before I can burn the disc.
I know there are programs like TOAST that will do this, but it is expensive.
I would be very grateful for any assistance.

Burn will not do what you want, and there is no real substutute for iDVD.
Why is there no iDVD on my new Mac?
Apple insists that the entire world has access to fast broadband (and are prepared to pay for the considerable bandwidth usage) and wants to distribute home movies to friends and relatives via download (iCloud, YouTube, Facebook, whatever) rather than mailing them a DVD. The fact that in reality not all users do, has so far had no effect on this policy. If you scream and shout loudly enough down the phone Apple may send you a free copy of iDVD. Stating that they would return their brand new Mac unless they received a copy of iDVD worked for some, but that is now said to have been withdrawn by Apple.
Also, you can complain bitterly via Apple’s Feedback link, perhaps suggesting that Apple could have provided a choice between burning DVDs and distributing home movies by other means. You may feel that Apple should not dictate how you destribute family videos or photos to distant relatives and friends, and should not assume that every user is prepared to pay for the excessive bandwidth usage charged by ISPs for huge downloads from the App Store:
http://www.apple.com/feedback/
Whilst Macs with a Superdrive continue to be able to burn video DVDs, the software for so doing, iDVD, is no longer included in the iLife bundle that came with OS 10.7 Lion (which also omitted iWeb) or that comes with OS 10.8 Mountain Lion. And it is no longer included in the iLife 11 from the online Apple Store: http://www.apple.com/ilife/. Your only solution is to look on Amazon or eBay and try to get an older version that includes iDVD 7, i.e. iLife version 9 onwards. You should also do this if you plan to buy a new Mac anytime soon, as stocks of iLife that include iDVD will not be available for ever.
However, the vastly more expensive FCPX can burn a DVD without iDVD or DVD Studio Pro involvement, but lack the themes etc of iDVD. Also, of course, there is Roxio Toast, which is the best software for burning anything but again does not offer the flexibility of iDVD.
And if you think Microsoft are any better, their new Windows 8 operating system will not play DVDs, or burn them, unless customers buy an extra upgrade, the company has announced: http://www.gizmag.com/windows-8-no-dvd-playback/22443/
In other words, computer manufacturers have declared optical media as dead, long before consumers are ready to stop using them, which is fine as long as they offered us a choice, but they won’t even do that. Flexibility and intuitive use of a computer seems to be a thing of the past.

Why does iPhoto/Aperture keep deleting photo sets from my Flickr account or keep placing whole sets back into the Pending stage of uploading the photos. This is becoming very frustrating and extremely time consuming. Any help would be most welcome

Has anyone got any idea as to why Iphoto/aperture keeps deleteing my photo sets from my Flickr account without warning or reason given. Also when I enter my sets the program will revert all of the photos back to the Pending stage of the up oading process. One or two photos I could live with but some of my set are in excess of 1500 photos per set, and this becomes very very time consuming to re upload them. and whats more annoying on some occassions after spending 12 to 16 hours re uploading them I find that they have all been duplicated. Is there a Bug with Iphoto or Aperture????????
any help would be most welcome P Jefferys

I am using Iphoto version 9.5.1, and No I am not deleting any photo from any file. what happens is this :- I open up Iphoto and enter my flickr account via the shared folder icon on the left hand side of the screen this is when I get a pop up screen from Iphoto informing me that they have removed a SET of photos from my Flickr account (no reason given) when i go into that set all I can see is dashed empty square where the photo used to be. I will then get another pop up screen saying that Iphoto can no longer access my flickr account and will I permit a reconnection and allow Iphoto to access my flickr account (add pass words etc) when I get back into flickr the SETS have gone and all other photos enter the Pending stage again. After re uploading the missing photos I find that some 50% of them have been duplicated.
PJ

Hi I recently destroyed my iPhone 4 before replacing it I backed it up through iTunes... I restored my new phone from my old one's back up but not one single picture was copied.. Did I lose all my pictures or is there a simple solution???

Hi I recently destroyed my iPhone 4, before replacing it I backed it up through iTunes... I restored my new phone from my old one's backup but not one single picture was copied.. Did I lose all my pictures or are they just hiding on my com?? is there a simple solution??? I thought I was doing everything right by backing up my old one first... now Im scared I lost everything including a lot of very important pictures.. PLEASE HELP!!

Restore from the backup!
You password: You have set it! It might be your passcode or you mioght have set it accidentally, so test all of the passwords you normally use. If you cannot get the password you backup is lost, but you can still sync your iTunes content.

Receive image from two web-cameras

Hallo all.
I have LV 7.1.1
I have two web-cameras which are connected to USB1 & USB2.
How can I see two images from two web-cameras or more in LV at the same time?
With respect
Aleksandr
Message Edited by [email protected] on 06-19-2006 01:20 AM

Aleksandr,
The IMAQ for USB driver communicates to the 3rd party camera driver using Directshow. There is an IMAQ USB Property Page VI available in LabVIEW that gives you the ability to open the camera configuration page of the 3rd party camera provided that there is one available. Depending on the vendor, you may or may not have access to change the resolution of your camera through this property page. I would contact the manufacturer of the camera to find out if there is a way to do this.
In case you are curious to know where to find the IMAQ USB Property Page VI, right-click on the block diagram and go to Search in the upper right corner of the palette. Search for "IMAQ USB Property Page" and the corresponding VI will show up in the list below it.
Regards,
Mike T
National Instruments

Does anyone know how to burn a CD+G (karaoke CD) onto a Mac so that I can then burn it onto a CD to use in my karaoke machine that will include lyrics and songs?

Does anyone know how to burn a CD+G (karaoke CD) onto a Mac so that I can then burn it onto a CD to use in my karaoke machine that will include lyrics and songs?

You already have a CD+G disc.
You cannot make another as it is a violation of copyright.

Is it possible to use Aperture to make a new image from two existing ones--ie, in a new jpg? I essentially want to create a collage that I can then print as a single image, rather than in a book. Any advice will be most welcome!

Similar Messages

Maybe you are looking for