Is it possible to use Backup Assistant with the Kin One?

I just got my new Kin One last night.  I've never used Backup Assistant before but I wanted to start now.  Unfortunately, the instructions for downloading the tool only seem to include phones with the "Get it Now" feature.  I can't find anything remotely like that in my phone's settings.  Am I overlooking it or does it simply not exist as an option for this phone?  I have a lot of contacts to enter and I hate to think that I'd have to do it all over again if something went wrong with the thing.
Thanks in advance for any help that anyone can offer! 

Sorry, Backup Assistant doesn't work with the Kin Onem. Some customers have had luck with getting a Verizon store to transfer them, but it seems to be hit or miss, as not every store has the software it needs for this particular device. Otherwise, consider this an opportunity to weed out old contacts as you enter them manually. 

Similar Messages

  • Is it possible to use 2 displays with the mac mini

    is it possible to use 2 displays with the mac mini

    I wanted an extended desktop using 2 monitors.
    I am using a Dell Ultrasharp ( has 1 VGA and 1 DVI-D) and a LG W2286 (has 2 HDMI, 1 DVI-D and 1 VGA)
    I ran into a similar issue where initially the mac would not detect the 2 displays and I thought I would share my solution.  I have a Mac Mini 10.8.2 i7 Late 2012.
    I bought a "Cable Matters" brand Mini Display Port | Thunderbolt to DVI Male Cable to have dual monitors.
    I am also using the included in the box  HDMI to DVI-D Adapter from Apple.
    Initial configuration was:
    Mini-Display (Thunderbolt connector) to DVI connected to the LG DVI-D input.
    Apple HDMI to DVI Dongle connected to the Dell DVI-D input.
    What happened was that my desktop was on the LG clear as day but OSX did not see the dell monitor.
    I called apple support and they could not figure out why the mini cant see the dell monitor. I think I discovered that the mac mini could not support 2 dvi monitors.
    I switched the monitor connections.
    The connections that works:
    HDMI out to HDMI in on the LG using a standard HDMI cable.
    Display port | Thunderport to DVI-D on the Dell's DVI-D in.

  • Using Mobile Web with the Kin TWOm?

    >Post deleted and locked. Duplicate post.
    Please refer to the original thread that was posted
    Can I use Mobile Web feature with the Kin TWOm?
    Message was edited by: Verizon Moderator

    Thanks sergig4925 for the suggestions!
    Nase97,
    I would be happy to check and see if we carry the earphones in our inventory!  Just reply to my direct message with the requested information, and will be happy to assist.

  • Is it possible to use Remote SharedObjects with the LCDS server?

    Hello,
    The ActionScript documentation for Remote SharedObject
    RSOs are created using the static getRemote function.  This returns a reference to an object that can be shared across multiple  clients by means of a server, such as Flash Media Server. If the shared  object does not already exist, this method creates one.
    The following code shows how you assign the returned shared object reference to a variable:
    var myRemote_so:SharedObject = SharedObject.getRemote(name, remotePath, persistence);After calling this method, use SharedObject.connect() to connect the  object to the application server, as shown in the following code
    var myNC:NetConnection = new NetConnection();
    myNC.connect(“rtmp://[yourDomain].com/applicationName”);
    var myRemoteSO:SharedObject = SharedObject.getRemote(“mo”, myNC.uri, false);
    myRemoteSO.connect(myNC);
    To confirm that the local and remote copies of the shared object are synchronized, use the sync event.
    All clients that want to share this object must pass the same values for the name and remotePath parameters.
    Is it possible to create RSO's using the LCDS server instead of the Flash Media Server? If so, how?
    Thanks,
    Oscar

    Tom,
    Thanks for your response. I decided to test this with the publish/subscribe messaging. Something I thought would work is not. Here is the simple example;
                    var btn:Button = new Button();
                    btn.label = "My Button ";
                    msg = new AsyncMessage();
                    msg.body = btn;
                    producer.send(msg);              
    Simple right? Well, this generates a fault;
    1/21/2011 10:37:55.462 [ERROR] mx.messaging.Producer 'D7094E2F-2CA1-39C0-1EC6-A9DE3171E836' producer fault for 'A11AE369-8349-8970-0C10-A9DE5113DA2E'.
    The LCDS log gets into more detail, AMF Deserialization ERROR....
    Please notice the use of Amf0 and Amf3 methods... I thought Amf0 was a thing of the past...
    Any ideas? Please help....
    [LCDS]01/21/2011 10:37:55.039 [ERROR] [Endpoint.RTMP] Deserialization failed for incoming data: Unknown AMF type '15'.
    flex.messaging.io.UnknownTypeException: Unknown AMF type '15'.
        at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:217)
        at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
        at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:437)
        at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
        at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
        at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:437)
        at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
        at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
        at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:437)
        at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
        at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
        at flex.messaging.messages.AbstractMessage.readExternalBody(AbstractMessage.java:654)
        at flex.messaging.messages.AbstractMessage.readExternal(AbstractMessage.java:324)
        at flex.messaging.messages.AsyncMessage.readExternal(AsyncMessage.java:98)
        at flex.messaging.io.amf.Amf3Input.readExternalizable(Amf3Input.java:491)
        at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:420)
        at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
        at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
        at flex.messaging.io.amf.Amf0Input.readObjectValue(Amf0Input.java:123)
        at flex.messaging.io.amf.Amf0Input.readObject(Amf0Input.java:94)
        at flex.messaging.io.amf.AmfMessageDeserializer.readObject(AmfMessageDeserializer.java:227)
        at flex.messaging.io.tcchunk.TCCommand.readMessage(TCCommand.java:191)
        at flex.messaging.endpoints.RTMPConnection.serviceTCMessage(RTMPConnection.java:1024)
        at flex.messaging.endpoints.RTMPConnection.doRead(RTMPConnection.java:610)
        at flex.messaging.endpoints.RTMPProtocolHandler.doRead(RTMPProtocolHandler.java:125)
        at flex.messaging.socketserver.Connection$ConnectionReader.run(Connection.java:864)
        at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
        at java.lang.Thread.run(Thread.java:662)
    Thanks,
    Oscar

  • Backup Assistant with more than one line?

    I am part of a family plan, two lines have a backup assistant setup, however when I try to look online for the stuff that is backed up on VerizonWireless it shows neither. All it does it show me an option of adding an email address, and for contacts laughs it off with "We will do the work for you."
    I don't need the email portion. I just want to view the contacts, and no matter how many times I tell the application on both of the phones to do so, it never shows up on verizon online.
    It even tells me in the application to go to verizonwireless.com/backupassitant to view the contacts...Yes...I would like to do that please.
    Thank You.
    Was resolved, apparently I need seperate myverizon accounts to have different backup assistant stuff.

    I have an iPhone and want a second line for someone
    with a regular phone. AT&T doesn't make the cost of
    this very clear on their site, and there is no phone
    number to call to ask. Does anybody know?
    Adding a line will cost you 9.99 per month, probably a $26.00 in actiavtion fees if your iphone is the main line.
    you can call 1800 331 0500 customer care.

  • Backup Assistant on the Kin TWOm

    Is there a way to get the backup assistant onto this phone? So far, I'm not liking this phone. It is a replacement for my Samsung Rogue and not sure if I like it yet, since I've been trying for 3 hours to get to backup assistant

    As far as I know, no way to get Backup Asst. on these phones. I took my old phone, and new Kin into a Verizon store, and they were able to transfer my contacts there (I also DID use backup asst. on my old phone, so my contact list is saved online). I had heard that some stores have the proper hardware to do transfers to the KIN's, and some don't, so it may be a crap shoot, but worth a try.
    Tom D.

  • Is it possible to use internal speakers with the headphones connected?

    as the connection of headphones is on the back of the iMac, it would be very useful to be able to switch between the internal speakers and the headphones, without ever having to unplug the headphones from your Mac Is this possible?

    Although it still means unplugging I bought one of these though I do use headphones very infrequently:
    http://www.johnlewis.com/belkin-speaker-and-headphone-splitter/p230405301
    but at least I don't have to fiddle around the back of the mac and risk,in time, damaging the socket on the mac.
    If you decide to purchase one, be careful where you buy from as there are Belkin imitations around ie eBay and indeed Amazon where the quality is suspect particularly if it only costs a couple of £s'. Bought mine from a renowned retailer with genuine Belkin blister pack.

  • Is it possible to use Firefox Sync with more than one browser on a single phone?

    I have set up a New Sync account. I have logged in with my desktop Firefox (30a2) and with Firefox release on my Android phone. They seem to be syncing with each other. But with Aurora, it says "Could not sign in". I'm fairly sure I have the password right.
    How do I work out what's wrong or debug this?

    Yes this should work.
    Before new Sync there was a restriction, Release/Beta and Aurora/Nightly were considered one channel each. https://bugzilla.mozilla.org/show_bug.cgi?id=988437 removed this restriction.

  • Is it possible to set my IPhone 5S to automatically backup to the Verizon cloud or to backup assistant. The only settings I see is where it will remind me to do. Can it be set to automatically do this, like my Droid did.

    Is it possible to set my IPhone 5S to automatically backup to the Verizon cloud or to backup assistant. The only settings I see is where it will remind me to do. Can it be set to automatically do this, like my Droid did.

        We want your information backed up as easily as possible, Todd536. With Verizon Cloud, you can not only tell the application when to back up automatically, but what you want backed up each time. Visit http://bit.ly/1f5sO4P for all the steps to manage your Verizon Cloud on your iPhone.
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • I want to upgrade from OS X 10.5.8 to Snow Leopard. When trying to back-up to a WD 1 TB external drive, the back-up process stalls at about 4 GB. Grateful for any clues to assist with the backup issue please.

    I want to upgrade from OS X 10.5.8 to Snow Leopard, then to Lion. When trying to back-up to a WD 1 TB external drive, the back-up process stalls at about 4 GB download. I would be very grateful for any clues to assist with the back-up process please.

    That disk is very probably formated as FAT 32, the normal format for PCs. FAT 32 cannot support files larger than 4 GB; also, it corrupts some types of Mac OS files. If you want to securely backup your mac files, you must have a disk prepared for Mac OS.
    Therefore, open Disk Utility, choose again 1 partition for your external disk and, under Options, GUID partition map (it may also be a boot disk for an intel mac), then format it as Mac OS Extended Journaled. Y0u are done.
    If you want to exchange data with PCs, you should chose Master Boot REcord and NTFS format, for this you must use a additional utility like NTFS-3G. But note that mac files may also get corrupt in NTFS format.

  • Using Migration Assistant with Time Machine or Super Duper data

    Can I use Migration Assistant with a Time Machine or Super Duper backup on an external drive instead of the original computer? I'm thinking of upgrading my Mini to a new one but only have one monitor. Not in the mood to hunt down an old monitor & buy adapters, etc. If I can, are there any tradeoffs using a backup instead of the original Mini? And is TM or SD preferable for this purpose? The current Mini runs 10.6 SL.

    KevinD wrote:
    Can I use Migration Assistant with a Time Machine or Super Duper backup on an external drive instead of the original computer?
    yes to both.
    I'm thinking of upgrading my Mini to a new one but only have one monitor. Not in the mood to hunt down an old monitor & buy adapters, etc. If I can, are there any tradeoffs using a backup instead of the original Mini?
    none.
    And is TM or SD preferable for this purpose?
    makes no difference.
    The current Mini runs 10.6 SL.

  • Is it possible to use backup files previously copied to an external hard drive to backup an iPhone?

    My sister froze her iPhone by trying to turn it off during a software update (not sure why) and restored it because she thought it would fix it. Unfortunately she unintentionally deleted all of her data and settings. She doesn't use iCloud, so I'm assuming all her files are backed up to her computer when she syncs her iPhone, but using iTunes I can only find two backup points using Edit>Preferences>Devices, both in the past few minutes. I know that each sync overrides the last backup files instead of creating newer ones, so apparently older backup files from her computer can't be used to recover her data. However, we both periodically use an external hard drive to back up our computers by basically dragging and dropping our files onto it, so there is an earlier version of her User folder on the external hard drive. It would definitely be preferable to use the backup files from a few months ago that are on the external hard drive and lose a few photos than to lose years of data, so would it be possible to direct iTunes to those backup files (AppData etc) instead of the ones saved on her computer hard drive? There's not any kind of browse option I can see that could allow me to get iTunes to search for backup files on the external hard drive and I'm not computer savvy enough to manually find the files and connect them to iTunes. Is it even possible to use backup files from an external hard drive? Do I have to replace the ones that exist on her computer now?

    Garageband can't use VST plugins.
    If you're talking about AUs: you could try to put an alias into the HD/Library/Audio/Plug-Ins/Components folder instead of the actual files, and see if GB loads them.

  • Is it possible to use two speakers with one Apple Tv ?

    Hello everyone,
    I bought an Apple Tv and I have one apple express with a Bose speaker and a Bose Link Air speaker.
    I would like to see a movie using the two speakers but every time that I try to select two speakers in the airplay Apple Tv menu, it automatically deselect the other speaker.
    Is it possible to use two speakers in the same time ? ( I know it's possible with Itunes)
    Thank,
    Ps: I have the last Apple TV

    No, that is not possible with Apple TV. You can set one 'output' via Apple TV, and 'stream' to multiple speakers from iTunes or via the remote app.

  • Is it possible to use variant configuration (with a Non-SAP solution) when creating ERP sales orders in SAP CRM WebUI

    Hello,
    our customer plans to use a Non-SAP solution for variant configuration (Camos) in SAP ERP (ECC 6.0) and in SAP CRM 7.0 EHP1 as well.
    ERP sales orders (and ERP quotations) should be created in SAP CRM (CRM WebUI).
    Is it possible to use variant configuration (with an external variant configuration tool) when creating ERP sales orders and quotations in the SAP CRM WebUI or do we have to implement SAP IPC for this?
    Thanks in advance.
    Regards,
    AEV

    Dear AEV,
    I think LORD (lean orders) should work with variant configuration as well. In the note 1236015 there is not restriction listed. However you need lord2 activated in ECC, and ECC system should be on EHP4.
    Best regards
    Rene

  • Is it possible to use Speech Recognition with Final Cut Studio?

    Is it possible to use Speech Recognition with Final Cut Studio?
    Using either Speech, AppleScript, Automator or a 3rd party app
    like iListen, can I enable Final Cut Studio apps to respond
    to voice commands?
    (e.g. I say "I" in Final Cut Pro and it sets an in point)
    thanks

    Yes, I wish "Make it really good" and "Fix my rough cut"
    were commmands too
    I did hear from the folks at iListen that
    they are planning on releasing a ScriptPak
    for Final Cut Studio next year which could be
    cool
    and that yes, iListen has some capability to
    integrate Speech Recognition with Final Cut,
    guess I need to give it a try for a test ride

Maybe you are looking for