Is it possible to use CHAP authentication on an ipad when you are not running a VPN ?

I can't find an option to switch from PAP to CHAP (like you get in the connection software you get with a 3G dongle)
Thank you

Tap Settings > General > Passcode Lock then tap Turn Passcode Off.

Similar Messages

Has anyone seen their iPads using your wifi non-stop, even if you are not using it, even when it's closed with the smart cover?

Lately my internet usage is up to the roof. I though somebody was hacking my wireless router so I made it super safe with lots of restrictions.
But that didn't stop the download of stuff over my wireless network. When I monitor who or what is using my wirelss, only my iPad was on, so, the moment I turn the wifi off on my ipad, the download stop. Turn it back on, it goes like crazy sucking up data off my wireless router for no reason. There is no indicator that the iPad is using the wireless yet, it is my iPad downloading things that I can't even seen, it does even with smart cover on!!!!. It's been over 50GB in only three days. I don't even have that amount of data on iCloud. This began a few days later after I upgraded my iOS to 6. But also, I'm thinking it could be an app that I installed. Or is it possible someone can use my iPad as a middle point to access my router and steal my internet. I have restored the OS on the iPad and it keeps doing it. Anyone has experienced something similar?

I'm going to guess that your battery life is also not so hot. What I suspect is happening is thatbthe pad is locked into an update loop with I cloud. As an example, if you have addresses that do not agree, the cloud back up will continue to try and correct itself, using both battery and wifi ( or cell). It may also be an app trying to uzpdate itself.
To troubleshot, try turning thigs off. If you are using the cloud, turn off all syncing and see it the problem stops. Then turn them back on, one by one, until you find the culprit. If it is an app, it may be harder to find, but the steps are the same. Turn off all notifications, and uninstall anything you added around the time the problem started.
A frequent culprit is magazine, comic, and newspaper subscriptions, that are constantly trying to update themselves.
Keep looking, you will find it.

ESS - ws01000109 - You are not of the possible agents of the task

Hi
When I try to cancel leave using workflow ws01000109 it is raising message
"You are not of the possible agents of the task ".
Can any body tell wheather we have to maintain data in pa30 transaction for this problem.
I have seen so many thread regarding this But I have not got any answer please reply for the same
I have set all tasks as general task only.
Edited by: balaji ramadas on Jun 8, 2009 4:01 PM

Hello,
You would be better off starting your own thread, and I hope that unlike the poster above you will share the result when you find a solution.
Has your task been set to General Task? If not, try that.
regards
Rick Bakker
Hanabi Technology

Does windows and mac run continuously using parallel, or is there some way to stop xp from running if you are not using it?

I would like to run a few windows programs but I dont want the mac side to suffer when i am not using the windows os. Is there some way to shutdown the windows part when you are not using?

If you are running MS Windows in Parallels or Fusion or any other virtualization software you can shut it down while the machine is operating and still run OS X. There is no trick, you shut down MS Windows just like you would with any other MS Windows machine. That is one of the main advantages of virtualizaiton software, the ability to run both environments simultaneously if you want. If you don't want to run Windows then simply don't start the virtualizaiton software or if it's already running quit it like you do any app on a Mac.

Is it possible to use FaceTime With my two IPad With the same email address? I Will Google to china next month And i would like to communicate With my kids.

IS it possible to use FaceTime With my two IPad That has the same address? I Will Go to China soon And i would like to discuss With my kids from there i.e. One IPad in China And one in Montréal.

No, this is not possible. It would be like dialing your own phone number. You must verify an additional new email address for your second iPad. See the following link which will tell you how to do this. You will need to add this new address to Facetime app in one of your iPads.
http://support.apple.com/kb/HE68

Is it possible to use software limits on 7354 board when switching control modes from open to closed or closed to open loop?

Is it possible to use software limits on 7354 board when switching control modes from open to closed or closed to open loop?

Hello Richard,
When you say 'open loop' and 'closed loop', are you referring to running the application in position and torque mode? If not, how exactly are your controlling a servo motor in open loop?
In closed loop mode, the encoder values will be used as reference and the motion VIs can be used to configure the software limit as required. Are you currently losing the software limits? If so, how exactly are you losing these values? I am not sure I understood what exactly is happening with software limits in your program, so any more information on this would be useful.
Vivek Nath
National Instruments
Applications Engineer
Machine Vision

Actually i use the mini-jack to cinch connection to stream music to my stereo. is there a possibility to use the digital output? my sterea amply does not have a digital imput.

actually i use the mini-jack to cinch connection to stream music to my stereo. is there a possibility to use the digital output? my stereo amp does not have a digital imput. are there good converters available?

By default, your AirPort Express is using an internal DAC to convert the digital audio stream to analog when you connect an analog audio cable to it audio output port. You can; however, connect an external DAC to the same port using a optical digital cable and let the external DAC do the conversion for your stereo.

Firefox MAC v30 with proxy needs authenticate"Cache Access Denied" sorry, you are not currently allowed to request: from this cache until you have authenticated

Firefox was working perfectly before we've updated it to version 30.0. It seems that the new version does not like our Proxy setting which needs users to auth with their AD accounts.
In the past version, Firefox will pop-up a box that allow you to type in the username and password, which works perfect. However, it does not pop-up anymore and gives me this error message.
The following error was encountered:
Cache Access Denied.
Sorry, you are not currently allowed to request:
http://www.google.com.au/url?
from this cache until you have authenticated yourself.
I try to manually set up the username in key chain and allow firefox to access it but Firefox seems do not access that key chain at all.
Is anyone have the issue with the proxy which needs authenticate in Firefox30.0? Does anyone know the possible solutions?
Many thanks!
Shuopan
------------------------------------trouble shoot update-----------------------------------------
Quite interestingly, Firefox will work for 1 minute after I am using Safari with that Auth proxy. However, if I am not touching Safari for 1 or 2 minutes, Firefox will stop working and pop up the similar error message.
tried network.http.use-cache = false but not work
Thanks

Quite interestingly, Firefox will work for 1 minute after I am using Safari with that Auth proxy. However, if I am not touching Safari for 1 or 2 minutes, Firefox will stop working and pop up the similar error message.
Thanks

When you are pulling music from a hard drive and it says music can not be found, is there a way to stop it from doing that every time I play music from my computer? It used to find all music now it only finds 1 song at a time

When pulling music from a harddrive and it say music can not be found, is there a way to stop this from happening every time I play music on my computer? It used to find all music when serching for song but now it only finds 1 at a time. I have over 2000 songs so I can't go through this every time.

1) However I do not want to move my itunes Music onto the flash drive, only my Movies, and want to keep my music on my hard drive.
Is this possible?
Yes
2) Do the MacBook Air's not have a separate program other than itunes that can play movies? If so, is there a program I can get to solve this problem? I went onto the App Store to see if there was something I could download, but all the apps were for creating DVD's, not simply playing them.
If you can play the movies in iTunes, you should be able to open the movie files using Quicktime, which should already be on your system. If you have already transferred the files to your flash drive, open the flash drive in Finder, and hold control when you click on the movie file (or right click if you have the enabled) and select Open With Quicktime Player. This should play the movie directly from the flash drive.
If you want to set all .m4v files to open with Quicktime by just double clicking on the file, you can follow the steps here: http://www.tech-recipes.com/rx/2573/os_x_how_to_change_default_application_to_op en_file_type/
3) If 1. & 2. questions are solvable, will it then be safe to delete the movies from my itunes?
You can move the TV shows to your flash drive by dragging them from the iTunes window to your flash drive in Finder or the flash drive icon on the desktop. When you are sure everything is transferred over to your external device, you can delete the movie from iTunes. I recommend playing the videos from the flash drive first before deleting them in iTunes.
To delete the videos from iTunes, you can highlight them and press the delete key on your keyboard. In the next prompt, you would want to move it to the trash so that it is deleted from your internal hard drive.
I hope that helps!

Error: You are not one of the possible agents of task 'WS99900032'

Hi frnds,
I have copied the std leave request workflow WS12300111 into WS99900032 and assigned in the SPRO setting. The approvers are determined using the workflow rule (PFAC) and its not determined from Org Management. But when i tried to apply leave, its throwing me the error You are not one of the possible agents of task 'WS99900032'.
Can anyone give me solution to solve it?
thanks,
Suganya.

You are not one of the possible agents of task 'WS99900032'
You need to refresh the organizational environment and then execute the workitem
1. First make the workflow tempalte as General task and then
Goto PFTC ---> enter the workflow tempalte number by selecting workflow template ---> open in display mode and on menu Addtional Data ---> agent assignment ---> Maintian ---> select General task
2. Goto SBWP -
> Seetings -
>workflow settings -
> refresh ornozational environment and then try to execute the workitem

Unable send request, you are not one of the possible agents

Hi,
I am trying to configure workflow for leave request, for my requirement i have to do some modifications to stadard workflow(12300111), so i copied it and made configuration settings in spro also, but when i create a leave from PTARQ transaction
workflow is not getting created.
when i debugged it, i got amessage saying 1) unable send request 2) you are not one of the possible agents
Is there any other stting i have to do??
Thanks,
Krish.

Hi Kishore,
Please check below things.
1. In the SPRO, have you maintained your workflow Template against the required leave type.
2.Use CTRL + F2, and check is there any error in your workflow. Also check whether it is active or not.
3. Check the workflow agent assignment in Basic data. It should be General Task.
Thanks.

You are not one of the possible agents of task 'WS20000081'

Hi,
I need to trigger the workflow WS20000081 using the service. This workflow gets triggered by 'Create Leave Request' service which is in ESS.
To test the above said workflow, I need to execute the service WS20000081 in R/3. But when I execute this service from Service User log-on, it throws an error as follows.
<b>You are not one of the possible agents of task 'WS20000081'.</b>
Even after I changed the task assigment as 'General Task', it keeps giving the same error.
Please suggest me how to solve this problem.
Regards,
jey

There are agents assigned for a task in the workflow.The same role has been assigned to my user id.But it does not work
I saw in Debug that it tries to execute the Method 'EXECUTE' in the Class CL_SWF_RUN_WORKFLOW_START..which checks for authorization internally.
I never know why this is failing.
I checked in another box which is upgraded to ECC .
There inside the Method Execute it takes a parameter m_task->properties-general = 'X'
and TCLASS = 'NO_CLASS'.These r passed to the authorization check which succeds there.
But in this system m_task->properties-general = ' ' and Tclass = ' '.
Can anyone pls suggest how to go abt this.

How do you leave your iMac when you're not using it?

Just curious..
Hey All..
I have a 24" iMac 2.8 with a 750GB Hard Drive. I tend to leave it on all the time shutting it down over night probably once a week. I have my settings to turn the display off after 5 minutes and turn off the hard disks "when possible". I just wondered if this was healthy or will it shorten the life expectancy of my pride and joy? I must admit that I do like to leave it on all the time. I leave my Time Capsule on all the time too...should I perhaps shut this down also?
I have the Applecare program which gives me some piece of mind with my iMac.
I'd be delighted and interested to hear how you all 'leave' your iMacs when you're not using them.
Kind regards..
~RICKY

I have my system plugged into a UPS and generally leave it sleeping. There's a window where I have it scheduled to wake up and then sleep again, but it I otherwise sleep it.
I suspect that sleep probably puts the least wear on your machine and is safe if you have a UPS. FWIW, an early 2007 24" iMac draws 3W of power when it's off, and 10W or so when asleep ( the newer models use less than 6W). During the boot process, power consumption will go 200-220W for ~1 minute. Normal usage it consumes about 100W. Idling, the machine will use between 70-100W depending on the screen brightness, and about 45W if the display is off and machine is idle. Playing something like WoW brings the power consumption up over the 200W mark.
The mechanical parts wear proportional to the number of times they are used (physical switches), and the electronic parts wear mostly based on the the result of cycles of temperature changes / surges of voltage. Pressing the power-button to power-on the Mac probably puts the most wear on the unit as a whole. That said, under normal circumstances you are not likely to put enough wear on anything but the hard disk to have it fail.

On i-pad, when try to enable itunes match, it says, "you are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe." I am subscribed though! Then it says no my request and item not available in the U.S. store. WWJD?

On i-pad, when I try to enable itunes match, it says, "you are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe." I am subscribed though! Then it says no to my request and, "item not available in the U.S. store." My Mac will not use update iTunes to any later version than the one I have because my os is also out of date, but when I try to update that i cant, so what do I have to do? Please don't tell me I have to buy a new Mac to be up to date.

On the iOS device you must be logged into the store with the exact same Apple ID you used to originally purchase the service. Go to Setting > iTunes & App Stores and if necessary sign out/in and then enable iTM.

You are not registered to use this service

We have everything with BT including a new TV box with netflix etc, which is currently at the end of the 14 day cooling off period. If the following problem isn't resolved today I will be considering cancelling the TV contract and leaving BT all together.
Our phone was working ok on the 15/4/2015. I tried to dial a local number last night (16/4/2015) to hear 'you are not registered to use this service please contact your service provider'. I dialled again with the area code, same thing. Also with national and mobile calls. We can receive incoming calls. I rang the Indian call centre who said there is no problem with the line or the account (which is in credit) it must be the handset. I am waiting for them to ring me back but having searched the problem online I think this will be to no avail. I have read about prefixing phone numbers with 1280 and this has worked when trying to ring my own mobile, so it can't be a problem with the handset, can it?
I've seen it could be a problem with Indirect Access IDA being removed from my account (no idea how this might happen). I also know that there was a major outage last week (around 6/4/2015) in our area which led to the freeview HD channels not being available. I had to reset our router which cleared the problem but were Openreach in our area doing something to the exchange boxes etc?
I need this problem sorting out A.S.A.P. please.

The fact that if you use 1280 it allows successful calls suggests your line is set as CPS , carrier pre select, if this has just happened it suggests a CPS provider has taken your 'line' for calls if not for line rental, but it's not properly set up otherwise calls would terminate it would just be billed by the mystery CPS provider
Have you had any approach by company's that sell this product ?, sometimes ISP's who's product includes calls can use CPS, if not, and you haven't been 'slammed' you need BT to set your line as non CPS , so BT handle your calls automatically without using 1280
This should be easy to get done, but the drones that answer the calls probably won't have a clue, hence the 'it must be your handset' nonsense they come up with, report the line faulty,don't accept an appointment, and insist they sent the problem to what was once called BT Operate, they look after the telephone exchange equipment and it's 'data',

Is it possible to use CHAP authentication on an ipad when you are not running a VPN ?

Similar Messages

Maybe you are looking for