Is it possible to use Cisco 1721 AUX port to dial into MS-RAS?

Is it possible to use Cisco 1721 AUX port with external modem to dial into Microsoft W2k-RAS server?

Hello Thanks for the link. The place where I'm stuck is when the async is going through the LCP negotiation. the LCP Confreg sends but I dont' get back anything. Cisco documentation states "make sure autoselect PPP or Async mode dedicated are set but I'm actually dialing into a Microsoft RAS server. Do you know where these settings are?
*Mar 1 05:38:04.782: As65 PPP: Phase is ESTABLISHING, Active Open
*Mar 1 05:38:04.782: As65 PPP: No remote authentication for call-out
*Mar 1 05:38:04.782: As65 LCP: O CONFREQ [Closed] id 43 len 20
*Mar 1 05:38:04.782: As65 LCP: ACCM 0x000A0000 (0x0206000A0000)
*Mar 1 05:38:04.782: As65 LCP: MagicNumber 0x314EFEBB (0x0506314EFEBB)
*Mar 1 05:38:04.786: As65 LCP: PFC (0x0702)
*Mar 1 05:38:04.786: As65 LCP: ACFC (0x0802)
*Mar 1 05:38:06.782: As65 LCP: TIMEout: State REQsent
*Mar 1 05:38:06.782: As65 LCP: O CONFREQ [REQsent] id 44 len 20
*Mar 1 05:38:06.782: As65 LCP: ACCM 0x000A0000 (0x0206000A0000)
*Mar 1 05:38:06.782: As65 LCP: MagicNumber 0x314EFEBB (0x0506314EFEBB)
*Mar 1 05:38:06.782: As65 LCP: PFC (0x0702)
*Mar 1 05:38:06.782: As65 LCP: ACFC (0x0802)
*Mar 1 05:38:08.782: As65 LCP: TIMEout: State REQsent
*Mar 1 05:38:08.782: As65 LCP: O CONFREQ [REQsent] id 45 len 20
*Mar 1 05:38:08.782: As65 LCP: ACCM 0x000A0000 (0x0206000A0000)
*Mar 1 05:38:08.782: As65 LCP: MagicNumber 0x314EFEBB (0x0506314EFEBB)
*Mar 1 05:38:08.782: As65 LCP: PFC (0x0702)
*Mar 1 05:38:08.782: As65 LCP: ACFC (0x0802)

Similar Messages

HT5390 is it possible to use windows RDP (terminal services) to remote into an apple server?

is it possible to use windows RDP (terminal services) to remote into an apple server?

corydchurch wrote:
is it possible to use windows RDP (terminal services) to remote into an apple server?
In the Windows world you can use RDP to remotely control a (Windows) server for administration purposes. You can also use RDP to connect to a Windows Terminal Server to run user applications on the server and multiple users can do this at the same time.
It is not possible to use RDP to remotely control a Mac server for administration purposes. You can however use Screen Sharing or VNC (if enabled) or install some other software like TImbuktu Pro to allow the same sort of thing. None of these use the RDP protocol. If your are a mainly or all Mac environment you would use Screen Sharing (Apple's custom version of VNC). You can get Windows versions of VNC and Timbuktu Pro which would therefore allow a Windows machine to remote control the Mac server.
It is however possible to buy and install a Mac Terminal server solution to allow multiple users to connect and run applications on the Mac server just like a Windows Terminal Server solution except as it is running on a Mac server it will allow running Mac applications rather than Windows applications. This is not for remote controlling the server. There are two such packages for the Mac these being AquaConnect and iRAPP. These can run their own proprietary protocol or they can also allow users to connect via the RDP protocol. This does therefore allow a Mac or Windows user to connect to the Mac Terminal Server and run Mac applications.

Cisco asr1000 aux-port

Hi. I have a Cisco ASR 1006 Router, with the the aux-port connected but i can´t configure the "line aux 0".. the line does not exist in the running config.
http://www.cisco.com/c/en/us/td/docs/routers/asr1000/install/guide/asr1routers/asr1higV8/asr1_hw2.html
In the related link Cisco says "The AUX port is a diagnostics access port".
I need to connect Cisco ASR1000 Aux-port with a Cisco CRS Console-Port as a second remote control method.
I Wish to confirm this before deploy several sites in the same way.
Thanks

Hi Saima,
With the Cisco 7942, you would leverage the setting under
the product specific porting of the config via device>phone
and set Wireless Headset Hookswitch Control to Enabled
http://headsetplus.com/PDF/Jabra-EHS-guide.pdf
Cheers!
Rob
"And if I should fall behind
Wait for me" - Springsteen

HT4145 is it possible to use a sngle air port express both for streaming music to an audio system AND as a wireless base station

is it possible to use a single air port express both for streaming music to an audio system AND as a wireless base station

Yes you can - if it is your only router or it is after another Apple router - if you have a non-Apple router then it would have to be hard wired to create its' own wireless network.

Possible to use inline mode with Port Channel

Hi,
Just wondering if anyone has used inline mode with Port Channel configuration placing WAE device between router and switch. Any tips or gotcahs to be concerned about. We currently have inline mode running at this location but site would want redudancy built in through port channel.
kind regards,
Nigel

Hi Nigel,
This is not supported :
Taken from here :
http://www.cisco.com/c/en/us/td/docs/app_ntwk_services/waas/waas/v531/command/reference/cmdr/glob_cfg.html#wp1532575
Best regards
Finn Poulsen

Is it possible to use Aperture3 to edit a standard photo into a Na'vi?

I am considering buying Aperture3, but I want to know if it is possible to turn a standard photo into something resembling a Na'vi from the movie Avatar? That is do color swaps, alter the ears and eyes etc.
Thanks in advance.

What you need to do that is Photoshop, The Gimp or a software like that.
Aperture has a lot of editing capabilities, but it's intended for photographers, not graphic artists.
However, in Aperture, you can choose to use an external editor for this kind of advanced editing and still keep the original and altered images in a unique, convenient, place.

Jabra headset and Cisco 7942 Aux port

Hi ,
Two of our employees are using Jabra headsets. They are currently working over the analog headset port, but they would like to use the digital converter cable the headset came with to improve performance. How should I turned it on to utilize the auxiliary port in behind the phone.
Head model: Jabra GN9300e
Phone model: 7942
Any help would be much appreciated.
Saima

Hi Saima,
With the Cisco 7942, you would leverage the setting under
the product specific porting of the config via device>phone
and set Wireless Headset Hookswitch Control to Enabled
http://headsetplus.com/PDF/Jabra-EHS-guide.pdf
Cheers!
Rob
"And if I should fall behind
Wait for me" - Springsteen

Using both the display ports on the new mac book pro

Hi, are there some one in Appel that can tell me if its possible to use both the display ports on the new mac book pro to show keynote on? or if its possible to make that possible? i would really like to be able to create a keynote with 5120 x 1600 pixels and get that output on two display ports, so that i can use my hardware to make a keynote with really nice reselution. its for use on a screen size of 18x4 meter.

Connect one display to the Mini-Displayport and the other to a USB port using an adapter like this:
http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/
Or buy a Matrox DualHead2Go DP Edition external video box and connect both displays to that, which in turn connects to the Mini-Displayport on the computer.
There are limitations either way. A USB-connected display will be less responsive than one connected to the MDP, because USB 2 is slow. To use two displays with the Matrox box, I believe the displays must be identical. Read and understand all the caveats about each alternative before making a decision about which way to go.

Is it possible to use ICS with a Cisco VPN client to allow pass through access for Domain login for a second machine.

I have a current machine Windows 7 Pro with a Cisco VPN 3.5v client that currently connects with access to a customers network.
They shipped a second machine Windows 8.1 Pro without adding local accounts, that is pre-joined to a sub-domain the first system has access to.
Would it be possible to use the first machine as a ICS or Router to allow the second machine to see or access for log in, without returning to the customer site and plugging in for a log in point?
Trying to save a 3 to 4 hr trip and lugging a system back for myself and the rest of the team.
Thanks

Hi,
Please refer to this part
http://windows.microsoft.com/en-hk/windows/using-internet-connection-sharing#1TC=windows-7
ICS and VPN connections
If you create a virtual private network (VPN) connection on your host computer to a corporate network and then enable ICS on that connection, all Internet traffic is routed to the corporate network and all of the computers on your home network
can access the corporate network. If you don't enable ICS on the VPN connection, other computers won't have access to the Internet or corporate network while the VPN connection is active on the host computer
Yolanda Zhu
TechNet Community Support

Is it possible to use a Linksys By Cisco Wireless-G Internet Home Monitoring Camera with Labview

I was wondering if it is possible to use a 'Linksys By Cisco Wireless-G Internet Home Monitoring Camera' with Labview
http://www.dabs.com/productview.aspx?Quicklinx=53PX&SearchType=1&SearchTerms=network+cameras&PageMod...
I wan't to be able to get the raw data from the camera and analyse it.
Message Edited by Jam.hall on 03-25-2009 09:03 AM
Solved!
Go to Solution.

Hi Jam.Hall
I am somewhat hesitant to say you will be able to use this camera with LabVIEW. It all depends on what functionality you are wanting to utilise on the camera, and how much video you want to analyze.
- If you want to use the wireless functionality, I am concered that the on board web server will compress and embed the video stream. I do not beleive this is something we can access in LabVIEW.
- If you wish to use the ethernet connection, if it is Gigabit Ethernet, then you should be able to use our IMAQ for GigE driver to bring in the feed, but looking at the specs for the camera, I'm not sure that this is an option.
- My other suggestion might be to utilise the record video stream function that the camera has. Depending on the format of the video file, you may be able to read in the recorded file and analyse it in LabVIEW.
If you could explain the purpose of your application, and what you would like to achieve with the system, there may be more suitable products that you can use.
Kind regards,
Sheela Sujeeun
Applications Engineer
National Instruments UK

Is it possible to use Airport Express to extend my Cisco E2500 wireless network

Hi everyone,
I just bought the new 2012 Airport Express yesterday, and want to extend my network which is using Cisco E2500 via the Ethernet port, but I don't know how to do it, anyone can tell me if it is possible and how to do it?

Hi Bob, I have successfully extend my Cisco E2500 network using the 2012 Airport Express via Ethernet port, below is the things I have configured.
1. Inside AirPort Utility - Wireless Tab, choose "Create a wireless network" in the Network Mode option, use the same Wireless Network Name, Wireless Security, Wireless Passowrd as the Cisco E2500.
2. In the Internet Tab, I just choose using DHCP since the Cisco E2500 will be the one to distribute IP Address, then the IP address, subnet mask, router address and DNS servers address has been assigned successfully to Airport Express.
3. In Network Tab, use "Off (Bridge Mode)" for the Router Mode option.
4. Click Update, and let the Airport Express to update itself and restart.
All done, and all my devices in different part of my house can access the internet connection, also my iMac in the living room and airplay music to the speaker that connect to my Airport Express inside the bedroom.

Is it possible to manage the switch SMB 300 series using Cisco Prime Infrastructure?

Is it possible to manage the switch SMB 300 series using Cisco Prime Infrastructure 1.2?

SF300 series is targeted for support in PI 2.0.

Dear All, I'm using Cisco ASA 5505 Firewall and I want the email alert from my Firewall if the CPU increase more than 70 %. Is it possible, Please help me. Thanks Vijay

Dear All,
I'm using Cisco ASA 5505 Firewall and I want the email alert from my Firewall if the CPU increase more than 70 %. Is it possible, Please help me.
Thanks
Vijay

Hi Vijay,
If can be done but you need any network management software. I personally dont think you can ask your ask to send mails. ASA can trigger alert to a SNMP configured server which will intern send mail to you
HTH,

Cisco WSA : Is it possible to use web proxy in transparent mode without WCCP router ?

Hello !
I would like to use Cisco WSA as a web proxy in a transparent way (without any configuration in client's web browsers) but i don't have a WCCP router. So, is it possible ?
If yes, how to do this ?
Thank you,
Stephane Walker

Hi Stephane
The only alternative to WCCP is PBR (Policy Based Routing). With a simple configuration on the router you can redirect traffic defined as interesting by access list to WSA. On the WSA you need to configure transparent mode (Security Services -> Web Proxy -> Edit Settings -> Proxy Mode: Transparent). You also need to assure that proxy is listening on the port 80 and that HTTPS proxy is enabled (on port 443) if you want to redirect the HTTPS traffic as well.
Sample configuration for Cisco router
access-list 110 permit tcp any any eq www
route-map proxy-redirect permit 10
match ip address 110
set ip next-hop xxx.xxx.xxx.xxx
interface ethernet0/1
ip policy route-map proxy-redirect
xxx.xxx.xxx.xxx is the proxy IP in such case and access-list 110 defines web traffic (HTTP TCP/80) as interesting.
The biggest disadvantage of such solution is lack of failure detection. If the proxy will go down for some reason router will keep redirecting the traffic causing internet access outage.
Routers other than Cisco equipment should also have an option to configure policy based routing.
/Artur
Ps. It's not possible to place the WSA in-line between clients and the internet.

CISCO 1721 :// No Echo/Response from CONSOLE Port

I have a CISCO 1721 I found in my 'stuff' when I was moving and I want to use it as a home router. Connecting to the CONSOLE port I get nothing echo'ed back. I confirmed connection hardware (USB=>Serial/Roll-Over cable, etc) by consoling into my CISCO 1841 lab router.
Other things I've tried are:
1) Wireshark'ed CONSOLE port - nothing;
2.) Wireshark'ed the AUX port - nothing;
3.) Wireshark'ed the ETH port - looks like 'normal' data.
I wanted to see if I could access the CONFIG from the AUX port by directly connecting my Laptop w/ a Roll-Over cable but not sure how to do that w/out a modem. Any suggestions from anyone??
Best regards....
J. David FIG
[email protected]

J. David FIG
The aux port is not restricted to use for modem. Depending on how the router is configured you might be able to start an exec session, get into privilege mode, and access the configuration of the router. I have been successful on similar routers connecting the console cable to the aux port and accessing the router.
HTH
Rick

Is it possible to use Cisco 1721 AUX port to dial into MS-RAS?

Similar Messages

Maybe you are looking for