Is it possible to use commerce server with netscape webserver and weblogic app server
Hello,
We want to use Netscape webserver using NSAPI plug-in with WLS 5.1.
In this scenario can we get full functionality of Weblogic Commerce server
2.0.1 if we wnat to use above setup.
This is urgent please.
surya
Surya,
The NSAPI plug-in with WLS 5.1 should not adversely affect the way the
Commerce Server works. Although this platform is not 'certified', the product
is J2EE compliant and should work without error.
Hope this helps!
surya chavali wrote:
Hello,
We want to use Netscape webserver using NSAPI plug-in with WLS 5.1.
In this scenario can we get full functionality of Weblogic Commerce server
2.0.1 if we wnat to use above setup.
This is urgent please.
surya
Similar Messages
-
Is it possible to use ppp cb with dialer int and AAA provided cb-dialstr
Hello Cisco fellows,
I am wondering if I can use callback with AAA provided callback string without a rotary group but with dialer profiles.
I have tried to setup a callback server with the following config:
interface BRI0
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
interface Dialer0
ip address 192.168.1.7 255.255.255.0
encapsulation ppp
dialer pool 1
dialer remote-name User_R6
dialer idle-timeout 60
dialer enable-timeout 1
dialer max-call 10
dialer-group 1
ppp callback accept
ppp authentication chap
But this config doesn't work for me.
I am getting the following debug messages:
Jun 30 17:07:47.307: BR0:1 DDR: callback to User_R6 already started
Jun 30 17:07:48.307: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed state to up
Jun 30 17:07:48.391: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 164 User_R6
Jun 30 17:07:48.391: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 164 User_R6, call lasted 2 seconds
Jun 30 17:07:48.391: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
Jun 30 17:07:48.391: BR0 DDR: has total 1 call(s), dial_out 1, dial_in 0
Jun 30 17:07:48.391: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di0
Jun 30 17:07:48.395: BR0:1 PPP: Sending Acct Event[Down] id[7D]
Any ideas.
Cheers,
MichaelHello Michael,
I think for the AAA provided callback string to work, you need to configure 'dialer aaa' on your dialer interface. Check the following document for a sample configuration:
Configuring PPP Callback over ISDN with an AAA Provided Callback String
http://www.cisco.com/en/US/tech/tk713/tk507/technologies_configuration_example09186a00800946ff.shtml
HTH,
GP -
IS it possible to use ni-visa with lookout to use an instrument driver
IS it possible to use ni-visa with lookout to use an instrument driver,, or just use the insturment driver...
Thanks
MarkHi Mark,
NI-VISA is a driver layer that is used to communicate to Serial, GPIB, VXI and PXI platform.
In reality the drivers that you use with Lookot do not make use of this driver layer called VISA (which is used for the most part in the instrument control area).
Normally the terminology (Instrument Driver) is not used in Lookout (or in any SCADA system). So the answer for your question is no, you cannot use NI-VISA with Lookout, with Lookout you either use the drivers object that comes with the package or you use an OPC server (normaly provided by the hardware manufacturer, this hardware is normally a PLC) to provide data to Lookout.
I hope it helps
Regards
Andre Oliveira
Applications Engineer
National Instruments -
Hello,
our customer plans to use a Non-SAP solution for variant configuration (Camos) in SAP ERP (ECC 6.0) and in SAP CRM 7.0 EHP1 as well.
ERP sales orders (and ERP quotations) should be created in SAP CRM (CRM WebUI).
Is it possible to use variant configuration (with an external variant configuration tool) when creating ERP sales orders and quotations in the SAP CRM WebUI or do we have to implement SAP IPC for this?
Thanks in advance.
Regards,
AEVDear AEV,
I think LORD (lean orders) should work with variant configuration as well. In the note 1236015 there is not restriction listed. However you need lord2 activated in ECC, and ECC system should be on EHP4.
Best regards
Rene -
have a touchscreen laptop running Windows 8.1. Is it possible to use the touchscreen with Firefox? I've installed Firefox but it only works with the mouse etc
Hello Sirving575, sorry but the metro version of firefox has been cancelled, see : https://blog.mozilla.org/futurereleases/2014/03/14/metro/
thank you -
Is it possible to use Speech Recognition with Final Cut Studio?
Is it possible to use Speech Recognition with Final Cut Studio?
Using either Speech, AppleScript, Automator or a 3rd party app
like iListen, can I enable Final Cut Studio apps to respond
to voice commands?
(e.g. I say "I" in Final Cut Pro and it sets an in point)
thanksYes, I wish "Make it really good" and "Fix my rough cut"
were commmands too
I did hear from the folks at iListen that
they are planning on releasing a ScriptPak
for Final Cut Studio next year which could be
cool
and that yes, iListen has some capability to
integrate Speech Recognition with Final Cut,
guess I need to give it a try for a test ride -
Is it possible to use apple tv with my mobile 3g internet connection
is it possible to use apple tv with my iphone 4s mobile 3g internet connection?
This has already been discussed here:
https://discussions.apple.com/thread/4819472?start=0&tstart=0 -
Is it possible to use lite sessions with AppLogic's?
Hi everybody,
I have one doubt about lite sessions. Is it possible to use lite sessions with AppLogic's?
If it's possible, which steps do I have to take to use them?
Thanks a lot,
AlbertoThe following is the basic procedure to extend one 802.11n AirPort with another:
AEBSn - Extending a wireless network Setup
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the base station that will connect to the Internet.
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility.) -
Is it possible to use lion recovery with PPPoE connection?
hi, i dont have a wifi connection at home.
but i want to use lion recovery to download a frsh copy of lion and then make USB flash drive with it.
is it possible to use lion recovery with PPPoE connection?raghav malhotra wrote:
is it possible to use lion recovery with PPPoE connection?
No.
Read more here:
http://support.apple.com/kb/HT4718 -
Is it possible to use a Mac with an embroidery sewing machine?
Is it possible to use a Mac with an embroidery sewing machine?
Computer support for that type of equipment is completely up to the company making/selling the embroidery software, not the computer builder. A Mac likely could support any such device BUT the device makers must choose to include Mac software versions. Many specialty software developers are about 15 yeas in the past and thing no one uses Macs, or they are doing the project on a shoestring budget and would have to hire someone on the outside to port the program to Mac.
As that function is likely of very narrow interest around here, I think you would do better to visit some of the embroidery sites and see if they mention products with known Mac support.
Otherwise you will have to find the sites for every embroidery machine maker to look for mention of Mac support. -
Is it possible to use face time with my iphone4 with 3G when the wi-fi is not avalable
Hi,
The Blurb
The * items message that is at the bottom
*FaceTime video calling requires a FaceTime-enabled device for the caller and recipient and a Wi-Fi connection. FaceTime over a mobile network requires iPhone 4S, iPhone 5 or iPad (3rd generation) with mobile data capability. Availability over a mobile network depends on carrier policies; data charges may apply.
Some features may not be available in all countries or all areas. Click here to see complete list.
It is not specifically saying it is 4G only phones.
It is not saying it is 3G either.
It is not listing an iPhone 4 (only the 4S)
It seems whether 3G can or cannot or if the iPhone can do 4G and it is available it seems that particular model will not.
10:26 PM Friday; March 29, 2013
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Is it possible to use 2 displays with the mac mini
is it possible to use 2 displays with the mac mini
I wanted an extended desktop using 2 monitors.
I am using a Dell Ultrasharp ( has 1 VGA and 1 DVI-D) and a LG W2286 (has 2 HDMI, 1 DVI-D and 1 VGA)
I ran into a similar issue where initially the mac would not detect the 2 displays and I thought I would share my solution. I have a Mac Mini 10.8.2 i7 Late 2012.
I bought a "Cable Matters" brand Mini Display Port | Thunderbolt to DVI Male Cable to have dual monitors.
I am also using the included in the box HDMI to DVI-D Adapter from Apple.
Initial configuration was:
Mini-Display (Thunderbolt connector) to DVI connected to the LG DVI-D input.
Apple HDMI to DVI Dongle connected to the Dell DVI-D input.
What happened was that my desktop was on the LG clear as day but OSX did not see the dell monitor.
I called apple support and they could not figure out why the mini cant see the dell monitor. I think I discovered that the mac mini could not support 2 dvi monitors.
I switched the monitor connections.
The connections that works:
HDMI out to HDMI in on the LG using a standard HDMI cable.
Display port | Thunderport to DVI-D on the Dell's DVI-D in. -
SAP CE 7.2 works fine is it possible to use sap gui with this version ?
Hello Dears,
Just installed CE7.2,
Very easy install thanks for SAP !!!
Is it possible to use sap gui with this version ?
I'm trying to use Sap Gui 7100.3.11.1042 but can't get the prompt.
Thanks for you help.
OlivierHello,
So I tried to find the right software but I found only B1DESetup_2.1.zip.
https://downloads.sdn.sap.com/BusinessOne/B1DESetup_2.1.zip
Do you have any idea about the right link to download or this is the right file ?
Thanks
Olivier -
As I heard, If i get an unlocked iphone 5s, I can use it with my Wind Mobile which i have to have a $40 monthly plan for it. So, I want to buy an Iphone 5s that I can use it here with Wind Mobile and in turkey with my turkish line that supports Iphone. So, is it possible that I can purchase an Iphone 5s that will be usable within Canada and Turkey? Im asking because, In Turkey, you need to register the Imei of the phone on your Passport to use it. Also, if i buy an unlocked Iphone 5s, will I be down to use it anywhere with any line?
I dont know if you know the procedure in Canada and Turkey. Wind mobile wasnt supporting Iphones until they decided to let people use Iphone 5s with their $40 plan.And as i know, Turkey is the only country that asks you to register the imei on your passport to use it. So, most of people did not know it. so procedures are changing country by country. Are you sure that If I buy an Iphone 5s from a canadian apple store, use it with my wind mobile line and the turkish line in Turkey?
-
How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?
No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.
Maybe you are looking for
-
Help! Voice memos will not sync!
I have checked all the right boxes for my voice memos to sync, but still 1 out of 3 will sync. Why won't the other 2 sync??
-
I have purchased Keynote and Numbers via my iPhone recently with payment details different from the one I usually use. When I synced my phone with iTunes, a message popped out stating that my Mac isn't authorized and advised me to do so which I did a
-
Creating white letterbox instead of black
Hi All, when putting 16;9 into 4;3, the letterbox at the top and the bottom is black. Can someone tell me how to make it white? Thanks, Stan
-
How do I prevent tree collapse after insert of row?
Hi, I've got a tree with several discrattrbindings. It's a recursive tree representing a parent/child relation. If I add a sub record to one of the children, the tree collapses. The insert is fine and the tree is ok, it's just that it completely coll
-
Has anybody ever worked with EBS subject areas in OBIEE?
What's speciel about Financial, CRM subject areas in OBIEE? Isn't it just a bunch of tables with financial or crm data joined in their own ways? Does anybody have any doc that describes the specs of such data models and how it works in OBIEE? Thank y