Is it possible to use FDM ERPI drill-through via Add-in Excel V11
Hi
I am using FDM ERPI 11.1.2.1 to load data from Oracle eBS GL (11.5) to Hyperion Planning 11.1.2.1.
The drill-through from Hyperion Planning to Oracle eBS GL via FDM ERPI is ok through Smartview and the data forms.
Do you know if it is ok through the Add-In Excel V11?
Thanks in advance for your help
Fanny
You cannot use the Classic Spreadsheet (Excel) Add-In if that is what you are referring to.
As the other post indicates it will only work via Smart View.
Thank you,
Todd Rebner
Similar Messages
-
ERPi drill through: From where to where?
Hi,
Can ERPi drill through from Essbase (I know it can from EPM, Planning, HFM, Smart view and FR).
Can ERPi drill to source other than ERP GL? If so, to where?
Thanks,
GabrielYes, you can load data to Essbase with ERPi and then drill through from Essbase to ERPi and then from ERPi to the source system GL.
Within the source system registration in ERPi you will need to update the Drill URL to the EBS url for drill to function. -
Drill-through via Transparent Partition
Hi
I am using Essbase Server and EIS 11.1.1. I have a ASO target cube which points to different ASO source cubes partitioned on dates. Each source cube has defined a drill-through report and this drill-through reports work fine if I access them directly from Excel add-in. But when I access these source cubes via my target cube (transparent partition) drill-through reports don't work (no visual effect on intersection cells). When I double click on them I cannot see my drill-through reports. Could anyone tell me what I am doing wrong here please? According to documentation, I should be able to drill-through via tranparent partioned target cube.
Regards
ChandraThank you for the reply but Essbase Studio does NOT support drill-through from Recursive Hierarchy dimensions. That's why I had to go back to EIS.
Edited by: user2695091 on 20-Feb-2009 17:30 -
*****EIS : Drill through Report Error while excel data retre
Dear All,
could you please help me in the below error . When i tried to get the drill through reports in excel add-in ,
i am getting the below error . When i had look into EIS log, its generating dynamic query for this drill through reports .
[NCR][ODBC Teradata][Teradata Database] Syntax error- expected something between the word '<<Databasename>>' and the word 'ai'.Unable to get catalog string.
Thanks in advance .
MYou are saying the dynamic query was generated, did you copy the query and tried to execute it in the database client. Check the SQl for any errors and also in the did you see any SQL errors?
-
Is it possible to use a keyboard sounds through midi on Logic 8?
The thing that I'm asking, is to do it the opposite.
I mean, you're able to use your midi controller such as M-Audio with the sounds from the software, for instance "Main Stage part of Logic Pro" , but I'm wandering If you Can do it the opposite way.
Using the Sounds Bank from the Keyboard through the interface and then recording as midi track, no an audio track.Eriksimon wrote:
Hi Pancenter, other 'old hands',
Hi Erik,
ps Pancenter:
Apple is not really either a hard- or software manufacturer. You are panned hard right there, I'm afraid. Both -wares are too interconnected to separate them like that. The combination is too important for their success - which they needed, back in the 'performa' and '601/4' days... The Pre-imaccian period...
The fact that Logic is now affordable for unwealthy but passionate amateurs like myself, I find wonderful. i had to sell my U220 and X5dr for it - luckily they indeed proved obsolete...
Well, if you ask Apple they will generally tell you they are a Hardware company, the software is there to sell hardware.
Their "key" pro apps are not available on other platforms, they are designed to do one main thing... get the hardware out there, why do you think Apple cut the price of Logic in half and removed the copy protection? A student of mine downloaded the whole f#$%^& program, jam packs and all. For someone who has used Logic since a 2.xx MIDI version and literally spent several thousand on the program and updates, it's somewhat of a slap in the face.
So I disagree, Apple is a mainly a hardware company, their software is designed to promote hardware, their profit is made in hardware sales.
If they were really a software company, support wouldn't cost an arm and a leg as the expense of the software would (somewhat) offset the support costs. (what is it now, $200 a call for pro help?)
I've beta tested enough to know how much time and money software support costs.
pancenter-
p.s. I wish the forum moderators would weigh in on this issue as the forum provides a LOT of support for Apple. -
Using indicator in drill through report
Hey there,
I'm working with Reporting Services in SharePoint mode using Sql Server 2012.
I created a child report which gets several values from another report.
I used one of these passed parameters as value for an indicator. When I deploy this report and access it on my SharePoint (Version 2013), the indicator is not shown, the field stays empty. When I create an indicator in the main report everything works how it's
supposed to work.
Do you know why the indicator is not displayed and how I can fix this?
ThanksHi Xalisa,
Per my understanding that you have insert the indicator in the child report and the value to for the indicator comes from the parameter of this child report which passing from the main report, now the indicator didn't display, when you insert the indicator
in the main report, it will works fine, right?
I have tested on my local environment and can't reproduce the issue. I would like to know if the indicator in the child report works fine when you preview in the designer and which type and version of version did you access the sharepoint?
If all work fine in the designer, this issue may be caused by a compatibility problem of the browser. In this scenario, I suggest you to turn on Compatibility View of browser.
Please refer to the following blog:
http://stackoverflow.com/questions/12916609/ssrs-bids-changing-the-meta-tag%20
http://webdesign.about.com/od/metataglibraries/p/x-ua-compatible-meta-tag.htm
If your problem still exists, please try to provide more details information.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
Drill-through from Workspace not possible?
Hello everybody,
I am working on Hyperion System 9.3.1
I have a cube with some drill-through reports.
I can drill-through from Add-In Excel and WebAnalysis reports but not from Workspace.
Example: For the same WebAnalysis report
- when opened with WA Studio allows drill-through at double click in the cell;
- when opened from Workspace, at double-click in the cell the Related Content windows opens up but I can't see my drill reports. Is that normal?
Thank you in advance for your help!In version 11.1 they added support for cube drill-through. In 9.3.1 you'll have to do it manually. Here are some ideas
- Create queries for your cube and relational data.
- Limit the result of your relational data with very specific filters to avoid enormous number of rows.
- Create your table or pivot for your cube data and add a script for cell double click.
- Set your limit based on the intersections, set the filters for your relational query and do a database process.
- Now show your relational table.
HTH,
Gerd -
How to extract data from ORCL GL in "full" and not "delta " with FDM ERPI?
Hi
I am using FDM ERPI 11.1.2.1 to extrct data from Oracle eBS 11.
I can see that FDM ERPI extracts data in "delta mode" using the GL_TRACK_BALANCES_DELTA (FDM adds a row in this table after the 1st load of the period").
Is it possible to force the "full mode" in order to reload all the data from Oracle GL for each FDM data load?
Because I don't know why, but I have each month rows which are not imported into FDM.
thanks in advance for your help
FannyHi
I had see that I have to install the FDM 11.1.2.1.502 patch in order to see this option in my ERPI adapter options.
I have passed this patch.
So I have the ERPI-FIN-C1 adaptor.
I can see a new option (Time Out Value) but no "Load Data" or "Execution mode" option :-(
Any idea of where the problem come from?
Fanny -
Hi,
I am using FDM ERPI,in this I got strucked in mapping situation,
my question,
my source system is having two different segments, and target system is having one dimension with two functionalities(two segments) of source system segments.
ex:
source system ---Account and Currency(like 12345 and USD)
Target system --- Account+currency.(like 12345USD)
what option I have to select from mappings :single segment,cancatnate segment,detailed mapping or FDM mapping.
is it possible from ERPI ,
Can you please help on this situation.
Regards,
SVHi Tony,
Thanks for your response.
and as you suggested,I tried cancatenate, and also rule running successfully,
but all the members how to mapped inside?,
is it possible to see the members mapping on this concatenate mapping?
how can I know its correctly mapped on each and every member?,
once again my problem scenari:
EBS * Planning*
Account | Currency AccountCurrency
Ex:11111 | USD 11111 (local currency not mentioned,i.e only account)
11111GBP
11111EUR
This is my situation ,can u please give me the scenario.
Regards,
SV -
Drill through from smartview to FDM gives HTTP 400 BAD Request
Hi All,
I've loaded data using FDM 11.1.1.3 to HPCM (Essbase)
I retrieved the data in Smartview and when moving my mouse over the cell i see the Drill through tekst balloon.
But when drilling through via Hyperion->Drill-Through-Reports it goes to the url :
http://<EAS SERVER>:13080/HyperionFDM/AuthorizedPages/IntersectionSummaryByLocation.aspx
instead of
http://<FDMSERVER>/HyperionFDM/AuthorizedPages/IntersectionSummaryByLocation.aspx
The first URL is in the Smartview settings but if i change that Smartview doesn't work anymore.
Has anyone a clue how to solve this?
Thanks in advance,
MarcSee Knowledge Document 967036.1 for a solution to this issue.
-
Drill-through from SmartView to FDM gives Navigation Canceled
Hi All,
I've loaded data using FDM 11.12.1 to Essbase (BSO)
I retrieved the data in Smartview and when moving my mouse over the cell i see the Drill through tekst balloon.
But when drilling through via Hyperion->Drill-Through-Reports it goes to the url :
http://<PROVIDER SERVER>:13080/HyperionFDM/AuthorizedPages/IntersectionSummaryByLocation.aspx
instead of
http://<FDMSERVER>/HyperionFDM/AuthorizedPages/IntersectionSummaryByLocation.aspx
Im using IIS.
Cannot find where to change this.
Has anyone an idea to solve this?
Cheers,
RafaelIs there something with ProxyPass or ProxyPassReverse?
ProxyPass/HyperionFDM http://<FDM SERVER>:80/HyperionFDM
ProxyPassReverse /HyperionFDM http://<FDM SERVER>:80/HyperionFDM
Thanks -
For Drill Through From Hyperion Workspace Forms to Oracle - EBS - Financail
Hi
i need to drill through from Hyperion Workspace Forms to Oracle - EBS- Financial.
What are approaches ?
Weather it is possible by using FDM? or ERPi adapter ?
Or it requires all Tools (FDM, ODI, ERPi ) ?
Urgent ..
Need ur help ?
regards
SherFDM/ODI/ERPI, but note it is feasible to load data using ERPi without FDM (but still need ODI installed) in which case it should drill back via the ERPi landing stage.
Before going any further i think you need to decide on your data flows and whether you use ERPi or ERPi / FDM to load data, and perhaps search the internet and read some documentation to understand the system, or, get some consultancy.
Edited by: user10757003 on 20-Sep-2012 09:04 -
Drill Through report Intersection levels
<p>Hello,</p><p> </p><p>Is it possible to have an intersection in a drill through reportfor a particular level which would not include its descendents?Like for example:</p><p>Dimension: Products</p><p> Coke</p><p> Pepsi</p><p> I want the drill through intersection to beonly on PRODUCTS and not on Pepsi or Cola.</p><p> </p><p>Can this be done in the drill through defination?</p><p> </p><p>Thank you.</p>
Assuming you are using EIS for the drill through, you can set up the drill through intersection for any level or at the dimension level. If you are using Analyzer for drill through, you can set up the query to only get the dimension 'Product'
-
Drill Through Report Parameters from Graph Series Action
Hi
Using ReportBuilder 3
I need some help please on passing parameters to a Drill Through Report, when a user clicks on a bubble in a graph.
In context, I have a Tooltip that provides a count of the sysid field, which on mouse over gives the user the correct aggregate for the bubble they are looking at.
[Count(sys_id)]
So say I have a bubble that I am hovering over, showing a count of two sysid's, when I click the bubble I want to run a Drill Through report that uses sysid as a parameter. Therefore I want to pass through the two sysid's that the aggregate has identified.
Now if I go to the action tab and select 'Go to report', select my report and add a Parameter, I need an expression that retrieves the sysid's for the parameters.
At the moment I am using the following expression:
=Split(Join(LookupSet(1,1,Fields!sys_id.Value,"ProjectMaster"),","),",")
This provides the correct string format for the multi value parameter that I have on my report. The problem is, it passes all the sysid's actively displayed on the entire graph and not just the two that the aggregate has identified in the Tooltip.
Question - Is there a way of building the expression to lookup the two sisid's relevant to the bubble I am interested in, rather than the dataset for the whole graph?
Many Thank
AndyHi Tim
The report has two parameters Based on Group Type and then Sub Group Type.
The expression I am using for the drill through parameters is =Split(Join(Fields!sys_id.Value,","),",")
Below is a subset of the dataset with relevant fields and sample values.
Group Type
Group Subtype
sys id
Total Workload
External Cost
Change Impact
GDC
GDC BI
2b8ccf64acafb00019bee02a7c7737cb
244
233480
Medium
GDC
GDC BI
6cdd24bfc8255100403385902e6cbb9a
351
121000
Low
GDC
GDC Dev.
6a518a1d38551140fbac4555180015ba
0
0
Medium
GDC
GDC PM
b47d1defff6c70c0a2ad8ffb97649d4e
110
27120
Medium
GDC
GDC PM
aba1fde1c82a5140403385902e6cbb5f
126
148400
Low
GDC
GDC PM
6b80ecafff2830c0a2ad8ffb97649dc8
0
0
Undefined
GDC
GDC SAM
59cc2749d8ae4900c950258abb887f8e
20
80906
Low
GDC
GDC SDC
442b09f5184f3440f0d833076f82fbff
0
2096
High
GDC
GDC SDC
f77c1f5c8cdf7c04048a0b130104c548
493
0
High
GDC
GDC SDC
bd3fe0753c138d404033c194bf5ae9e9
0
0
Very High
GDC
GDC Siebel
cb35a17d55419d008cb3130c2c9ae23d
0
0
Medium
Just to note! the copy and paste has not included underscores in column names!:-) -
Customizing SSAS drill through action
Hi eb
Is there an easy way to customizing SSAS built in drill through action?
For example adding an export to excel option or exposing some of its fields as filters?
Of course a reporting action comes in to mind but i was wondering if there was any thing
one could do with the drill through action instead of adding another technological layer to the solution?
TIA
ReaHi reapeleg,
According to your description, you want to customizing an Action drill through into an exported Excel SSRS report without involving SSRS. Right?
In Analysis Services, it's not supported to create an action which combines both Drillthrough and Reporting. For your requirement, it can't be achieved currently. You have to use a Reporting to navigate to a SSRS report and export into a format(Excel, CSV,
PDF.....).
However, in this scenario, I suggest you directly access the data in SSRS. And you can also implement MDX Dirllthrough action in SSRS. Please refer to an article below:
Implementing MDX Drillthrough in SSRS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support
Maybe you are looking for
-
PS2 and TV TUNER MASTER?
how do i get the sound to work? I put it in the audio in, the setting was set to audio in.... still no sound. So what do I have to do to get sound? I got a ps2 and i wnat to play it using tv tuner.
-
Where does email attachment get saved to?
I received an email with picture as an attachment. When I click the attachment link I can download the picture and view them. But does anyone know where this picture is saved at? (i.e. SD card? internal memory?) Thanks!
-
I just upgraded from a Blackberry Bold to the Q10. The keyboard is essential for any smartphone. I download podcast's every day and listen in car on my commute. With the BB Bold I plugged in with the audio cable and listened. When a call came in, the
-
Hi there, i want to install Arch on my system but I had a few problems initially, the first was with the pacman.conf, i wanted to download and install KDEmod and not the full KDE package, I appended the config file with. [kdemod-core] Server = http:
-
How can I repair Safari 8.0.2?
How can I repair Safari 8.0.2? it will not reopen after closing unexpectedly. I have a Macbook Air. I checked plugins etc in my library. I keep getting the error message and when i click reopen, nothing happens. I have rebooted as well.