Is it possible to use logic rules to manage email submission receipts?

Is it possible to use logic rules to manage email submission receipts?
I have one form and based on the user's selection I want to manage which email submission receipt gets sent to that specific user.
Is this at all possible?
Please ask for clarification if I am not making sense.

It should be no problem since the Audio Kontrol 1 is Core Audio compatible. This has nothing to do with VST's.
In doubt contact Native Instruments support.
Fox

Similar Messages

Have iMac with IMAP email, 3rd party. Use a rule to sort emails into various boxes. One box does not appear on Mail in new iPhone 5C. Emails sorted into that box are also missing.

Have iMac with IMAP email, 3rd party. Use a rule to sort emails into various boxes. One box does not appear on Mail in new iPhone 5C. Emails sorted into that box are also missing. Any suggestions?

In which this just gets weirder and weirder...
I logged onto iCloud.com, signed into my account and created a rule there that emails from my husband's address should be allowed into the inbox. I sent another test msg from him to me and got the New Mail notification sound, the new mail showed up but in a flash disappeared. This happened in the space of about 3 seconds.
Messages from his email address are not even showing up in the Trash folder. WTH?

Understanding and using Logical Components for Managed System configuration

Experts.....
I am embarking on a fresh installation of SolMan 7 EhP1 SPS25 and after a few bugs along the way, I am finally nearing the end of including the first Managed System. Somewhat related to {forum:id=10293771] I am hoping I can get some advice, but specifically with regards to Logical Components.
General question - I have a slide from SAP that shows a picture from Product->System->Instance->Logical System (client)->Logical Component. I am confused because it shows that Client 100 of a given ABAP system could be assigned to Logical Component A, whereas Client 200 of the same system could be assigned to Logical Component B. This seems wrong to me?
I am at the last step of the managed systems configuration wizard : "create logical components" and only want to ensure that I set things up to hopefully ensure that later usages (Maintenance Optimizer, etc) will handle things correctly!!!
- Our SAP landscape is not very complex
1. only ERP and EP (Dev/Test/Prod).
2. We are utilizing HR Self Service (XSS).
3. The ERP ABAP systems are on Netweaver 7.01.
4. EhP4 has been installed, however we only activated the HCM business functions. Therefore SAP_HR is on 604 whereas SAP_APPL is on 600. I think this might be driving some of the confusion in SMSY
For the DEV ABAP system I am trying to configure:
1. The system is showing up in two products : "SAP ERP" and "SAP ERP Enhancement Package" with the header data for both showing "EHP4 FOR SAP ERP 6.0 / NW7.01" and "SAP ERP 6.0"
2. Under "SAP ERP" the "product instance selection" shows only "SAP NW - Adobe Docu. Service" and "SAP ECC Server" as relevant
3. Under ""SAP ERP Enhancement Package" the "product instance selection" shows only "Human Capital Mgmt" as relevant by default. I manually flagged the development portal system as "relevant" for "SAP XSS (Self Services)"
4. The RCA DBA Cockpit system is complaining "No data available for extractor activation. Please check product mapping and Software Components in SMSY"
5. In the Managed System wizard, there is no logical component for any of the "EHP4 FOR SAP ERP 6.0 / NW7.01" selections
From what I can tell, I think this is correct:
1. Create a Z_EHP4 logical component and assign the DEV/QAS/PRD systems to them
2. Also assign the DEV/QAS/PRD to the existing SAP logical component "SAP ERP ECC SERVER"???
3. For the Solutions, my plan is to create
a. Non-Production ERP : with the dev/test erp/ep systems, but test system as the leading system
b. Production ERP with the prod erp/ep systems only
Thanks for any advice/guidance to help me avoid future problems!!
Edited by: Eric Poellinger on Jun 15, 2011 6:32 PM

General question - I have a slide from SAP that shows a picture from Product->System->Instance->Logical System (client)->Logical Component. I am confused because it shows that Client 100 of a given ABAP system could be assigned to Logical Component A, whereas Client 200 of the same system could be assigned to Logical Component B. This seems wrong to me?
Client 100 could be assigned to any number of logical components, client 200 could be assigned to those same ones or none of them. A logical component is just a grouping of systems used to accomplish some task in SolMan.
For example with ChaRM you could have 2 logical components.
ZCHARM_DEV development (100) -> QA (200) -> prod (300)
ZCHARM_SEC security (900) -> QA (200) -> prod(300)
One is used to show the path for moving development changes to prod, the other for security changes. 200 belongs to both, but 100 only to one.
Set them up in whatever way meets you needs. It looks like for you, you could just use the default one and assign your clients to the various system roles. Not all functionality in SolMan uses the logical components though.

Is it possible to use multiple signatures in same email in Mail?

Hi,
I'm using Mail in Mac OS X 10.6.6. Previously (older system) I could chose more than one signature in an email to be used simultaneously in that email, simply by clicking on whatever signatures I wanted. Since upgrading to Snow Leopard, clicking on more than one signature simply changes the signature displayed, so that I can't have more than one signature per email. Is there a tiny box I should be ticking somewhere?
Thanks.

Adding a scanned signature to Apple Pages and Mail docs using Lion

Is it possible to have the Email Submission Receipts formatted to include graphics/photos?

We would like an agency letterhead or logo to be included on the email receipt to respondents. Is that possible somehow?

Yes, you can. Obviously, the iPod Touch will only be able to access the email account when connected to a Wi-Fi network.

RSCRM_BAPI - using logical path

Hi everybody,
I use rscrm_bapi in order to export data from bw.
Is it possible to use logical path name in this interface?
I try to write in the path field a logical path name which was define earlier (tran file),
but the system concatenate the logical path name with the file name.
For example:
File name: HANA
Path name: HADAR
result in al11: /defualt directory/HADARHANA
What is the right way to do it?
Hadar

RSCRM_BAPI - directly dumps a query as a .CSV in the app server - for an APD to work - you cannot specify the filename but then by specifyinf a logical file name - it can be run multiple times without any changes...
Arun

Using navigation rule

Is it possible to use navigation rule to render out UIComponent appropriately?

I'm not sure what you mean!!! But the UI Component needs to be on a page which can be reached through a navigation rule.

USING LOGIC'S PLUG INS WITH PROTOOLS

Does anything know if it's possible to use Logic Pro's plugins in Protools LE?
I like mixing in Protools but hate the plugins.. Logic's are so much better.

Why do you want to mix in Pro Tools if you have Logic Pro 7? I just want to know why would you do that?

Can I use my newly created iCloud email address as my Apple ID?

Hey,
I know there have been loads of post regarding iCloud and account issues. I was wondering if it was possible to use my newly created iCLoud email address as my Apple ID and its primary address. I had a hotmail account as my Apple ID before signing up for iCloud. For me it's purely cosmetic and I want to retire that hotmail address.
Thanks
Peter

this has been really bugging me as well, i dont see why we cant do this.
if you create a new apple id you get the option to use a free icloud email as the apple id, but old users are stuck?

Is it possible to use List Type in XML schema within the SOA Rule author?

Is it possible to use List Type in XML schema within the SOA Suite Rule author? The reason is that with the following XSD, Rule author generates XML facts of type "List" for the element "ResultSet". Basically I want to check the Input facts (Input1, Input2, Input3) for some conditions and then assign action to the element Resultset of type List (array). The output Resultset can contain multiple values based on the input facts. My problem is that I am unable to see the ResultSet in the "Assign" action type of the action block. Is it possible to use the Resultset of type List with the Rule author or is there any limitation on the rule author and any workaround for this?
<schema xmlns="http://www.w3.org/2001/XMLSchema"
targetNamespace="http://www.oracle.com/ns/TestMultipleOutputs"
elementFormDefault="qualified">
<element name="TestMultipleOutputs">
<complexType>
<sequence minOccurs="0">
<element name="Input1" type="string" minOccurs="0"/>
<element name="Input2" type="string" minOccurs="0"/>
<element name="Input3" type="string" minOccurs="0"/>
<element name="ResultSet" type="string" minOccurs="0"
maxOccurs="unbounded"/>
</sequence>
</complexType>
</element>
</schema>
--Thanks a lot

Hi Richard,
I have slightly modified the xml schema you suggested and was able to import into the rule author. the following is the modified XSD. Rule Author created a List type for the "ResultSet" . I still don't see "Resultset" in the assign action, so I tried creating RL function in order to assign the output to the "Resultset", but was unsuccessful so far. can you please let me know how to populate the resultset with the output values? Thanks a lot.
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema attributeFormDefault="unqualified"
xmlns:ns1="http://www.oracle.com/ns/TestComplexOutputs"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
targetNamespace="http://www.oracle.com/ns/TestComplexOutputs"
xmlns:tns="http://www.oracle.com/ns/TestComplexOutputs"
elementFormDefault="qualified">
<xsd:element name="TestComplexOutputs">
<xsd:complexType>
<xsd:sequence minOccurs="0">
<xsd:element name="Input1" type="xsd:string" minOccurs="0"/>
<xsd:element name="Input2" type="xsd:string" minOccurs="0"/>
<xsd:element name="Input3" type="xsd:string" minOccurs="0"/>
<xsd:element name="ResultSet" type="tns:ResultSetType" minOccurs="0"
maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:complexType name="ResultSetType">
<xsd:sequence>
<xsd:element name="ResultSet" type="tns:ResultSetStructure" minOccurs="1"
maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="ResultSetStructure">
<xsd:sequence>
<xsd:element name="ErrorReason">
<xsd:simpleType>
<xsd:restriction base="xsd:string"/>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>

Is it possible to use .amr files in Logic Pro 9?

I have a .amr file. Is it possible to use in Logic Pro and if so how? If not is there a way to convert it?

"Is it possible to use .amr files in Logic Pro 9"
Probably, but it's a freakin' travesty!

Possible to use Mackie Logic Control to control volume faders in MainStage

Hi, is it possible to get Mackie Logic Control to work with the volume faders of the various channel strips in MainStage. Is seems Mackie Control is automatically mapped when using Logic - but MainStage doesn't seem to automatically map faders unless I am missing something. Any help is appreciated. Thanks.

Hello, I installed 'Midi Monitor' and when I slide the 'Master Volume' fader on the Mackie Control, Midi Monitor reports the following:
17:02:29.250 From Port A Note On 1 E7 127
17:02:29.251 From Port A Pitch Wheel 9 -7888
17:02:29.254 From Port A Pitch Wheel 9 -7824
17:02:29.264 From Port A Pitch Wheel 9 -7696
17:02:29.274 From Port A Pitch Wheel 9 -7520
17:02:29.285 From Port A Pitch Wheel 9 -7392
17:02:29.295 From Port A Pitch Wheel 9 -7232
17:02:29.305 From Port A Pitch Wheel 9 -7040
17:02:29.315 From Port A Pitch Wheel 9 -6896
17:02:29.326 From Port A Pitch Wheel 9 -6704
17:02:29.336 From Port A Pitch Wheel 9 -6528
17:02:29.346 From Port A Pitch Wheel 9 -6304
17:02:29.356 From Port A Pitch Wheel 9 -6128
17:02:29.367 From Port A Pitch Wheel 9 -5808
17:02:29.377 From Port A Pitch Wheel 9 -5696
17:02:29.387 From Port A Pitch Wheel 9 -5520
17:02:29.397 From Port A Pitch Wheel 9 -5264
17:02:29.407 From Port A Pitch Wheel 9 -5056
17:02:29.418 From Port A Pitch Wheel 9 -4800
17:02:29.428 From Port A Pitch Wheel 9 -4592
17:02:29.438 From Port A Pitch Wheel 9 -4320
17:02:29.448 From Port A Pitch Wheel 9 -4112
17:02:29.459 From Port A Pitch Wheel 9 -3904
17:02:29.469 From Port A Pitch Wheel 9 -3632
17:02:29.479 From Port A Pitch Wheel 9 -3424
17:02:29.489 From Port A Pitch Wheel 9 -3168
17:02:29.500 From Port A Pitch Wheel 9 -2960
17:02:29.510 From Port A Pitch Wheel 9 -2720
17:02:29.520 From Port A Pitch Wheel 9 -2528
17:02:29.530 From Port A Pitch Wheel 9 -2320
17:02:29.541 From Port A Pitch Wheel 9 -2080
17:02:29.551 From Port A Pitch Wheel 9 -1888
17:02:29.561 From Port A Pitch Wheel 9 -1648
17:02:29.571 From Port A Pitch Wheel 9 -1472
17:02:29.582 From Port A Pitch Wheel 9 -1248
17:02:29.592 From Port A Pitch Wheel 9 -1072
17:02:29.602 From Port A Pitch Wheel 9 -864
17:02:29.612 From Port A Pitch Wheel 9 -720
17:02:29.623 From Port A Pitch Wheel 9 -576
17:02:29.633 From Port A Pitch Wheel 9 -384
17:02:29.643 From Port A Pitch Wheel 9 -224
17:02:29.653 From Port A Pitch Wheel 9 -48
17:02:29.663 From Port A Pitch Wheel 9 96
17:02:29.674 From Port A Pitch Wheel 9 304
17:02:29.684 From Port A Pitch Wheel 9 448
17:02:29.694 From Port A Pitch Wheel 9 592
17:02:29.704 From Port A Pitch Wheel 9 784
17:02:29.715 From Port A Pitch Wheel 9 928
17:02:29.725 From Port A Pitch Wheel 9 1104
17:02:29.735 From Port A Pitch Wheel 9 1248
17:02:29.745 From Port A Pitch Wheel 9 1440
17:02:29.756 From Port A Pitch Wheel 9 1584
17:02:29.766 From Port A Pitch Wheel 9 1728
17:02:29.776 From Port A Pitch Wheel 9 1904
17:02:29.786 From Port A Pitch Wheel 9 2048
17:02:29.797 From Port A Pitch Wheel 9 2208
17:02:29.807 From Port A Pitch Wheel 9 2352
17:02:29.817 From Port A Pitch Wheel 9 2512
17:02:29.827 From Port A Pitch Wheel 9 2640
17:02:29.838 From Port A Pitch Wheel 9 2832
17:02:29.848 From Port A Pitch Wheel 9 2960
17:02:29.858 From Port A Pitch Wheel 9 3104
17:02:29.868 From Port A Pitch Wheel 9 3280
17:02:29.879 From Port A Pitch Wheel 9 3424
17:02:29.889 From Port A Pitch Wheel 9 3600
17:02:29.899 From Port A Pitch Wheel 9 3744
17:02:29.909 From Port A Pitch Wheel 9 3920
17:02:29.920 From Port A Pitch Wheel 9 4096
17:02:29.930 From Port A Pitch Wheel 9 4256
17:02:29.940 From Port A Pitch Wheel 9 4464
17:02:29.950 From Port A Pitch Wheel 9 4624
17:02:29.960 From Port A Pitch Wheel 9 4832
17:02:29.971 From Port A Pitch Wheel 9 4992
17:02:29.981 From Port A Pitch Wheel 9 5184
17:02:29.991 From Port A Pitch Wheel 9 5328
17:02:30.001 From Port A Pitch Wheel 9 5520
17:02:30.012 From Port A Pitch Wheel 9 5664
17:02:30.022 From Port A Pitch Wheel 9 5808
17:02:30.032 From Port A Pitch Wheel 9 6000
17:02:30.042 From Port A Pitch Wheel 9 6144
17:02:30.053 From Port A Pitch Wheel 9 6320
17:02:30.063 From Port A Pitch Wheel 9 6464
17:02:30.073 From Port A Pitch Wheel 9 6640
17:02:30.083 From Port A Pitch Wheel 9 6800
17:02:30.094 From Port A Pitch Wheel 9 6960
17:02:30.104 From Port A Pitch Wheel 9 7168
17:02:30.114 From Port A Pitch Wheel 9 7328
17:02:30.124 From Port A Pitch Wheel 9 7520
17:02:30.134 From Port A Pitch Wheel 9 7680
17:02:30.145 From Port A Pitch Wheel 9 7872
17:02:30.155 From Port A Pitch Wheel 9 8000
17:02:30.165 From Port A Pitch Wheel 9 8144
17:02:30.176 From Port A Pitch Wheel 9 8176
17:02:30.453 From Port A Note Off 1 E7 0
17:02:31.298 From Port A Note On 1 E7 127
17:02:31.299 From Port A Pitch Wheel 9 8176
17:02:31.384 From Port A Pitch Wheel 9 8176
17:02:31.394 From Port A Pitch Wheel 9 8080
17:02:31.404 From Port A Pitch Wheel 9 8000
17:02:31.415 From Port A Pitch Wheel 9 7888
17:02:31.425 From Port A Pitch Wheel 9 7760
17:02:31.435 From Port A Pitch Wheel 9 7552
17:02:31.445 From Port A Pitch Wheel 9 7392
17:02:31.456 From Port A Pitch Wheel 9 7216
17:02:31.466 From Port A Pitch Wheel 9 6976
17:02:31.476 From Port A Pitch Wheel 9 6800
17:02:31.486 From Port A Pitch Wheel 9 6576
17:02:31.497 From Port A Pitch Wheel 9 6400
17:02:31.507 From Port A Pitch Wheel 9 6176
17:02:31.517 From Port A Pitch Wheel 9 6000
17:02:31.527 From Port A Pitch Wheel 9 5808
17:02:31.537 From Port A Pitch Wheel 9 5568
17:02:31.548 From Port A Pitch Wheel 9 5360
17:02:31.558 From Port A Pitch Wheel 9 5104
17:02:31.568 From Port A Pitch Wheel 9 4896
17:02:31.578 From Port A Pitch Wheel 9 4592
17:02:31.589 From Port A Pitch Wheel 9 4352
17:02:31.599 From Port A Pitch Wheel 9 4048
17:02:31.609 From Port A Pitch Wheel 9 3824
17:02:31.619 From Port A Pitch Wheel 9 3552
17:02:31.630 From Port A Pitch Wheel 9 3216
17:02:31.640 From Port A Pitch Wheel 9 2960
17:02:31.650 From Port A Pitch Wheel 9 2656
17:02:31.660 From Port A Pitch Wheel 9 2432
17:02:31.671 From Port A Pitch Wheel 9 2112
17:02:31.681 From Port A Pitch Wheel 9 1856
17:02:31.691 From Port A Pitch Wheel 9 1584
17:02:31.701 From Port A Pitch Wheel 9 1232
17:02:31.711 From Port A Pitch Wheel 9 944
17:02:31.722 From Port A Pitch Wheel 9 576
17:02:31.732 From Port A Pitch Wheel 9 304
17:02:31.742 From Port A Pitch Wheel 9 -80
17:02:31.753 From Port A Pitch Wheel 9 -368
17:02:31.763 From Port A Pitch Wheel 9 -672
17:02:31.773 From Port A Pitch Wheel 9 -1056
17:02:31.783 From Port A Pitch Wheel 9 -1360
17:02:31.793 From Port A Pitch Wheel 9 -1712
17:02:31.804 From Port A Pitch Wheel 9 -2000
17:02:31.814 From Port A Pitch Wheel 9 -2352
17:02:31.824 From Port A Pitch Wheel 9 -2624
17:02:31.834 From Port A Pitch Wheel 9 -2960
17:02:31.845 From Port A Pitch Wheel 9 -3232
17:02:31.855 From Port A Pitch Wheel 9 -3520
17:02:31.865 From Port A Pitch Wheel 9 -3872
17:02:31.875 From Port A Pitch Wheel 9 -4160
17:02:31.886 From Port A Pitch Wheel 9 -4480
17:02:31.896 From Port A Pitch Wheel 9 -4736
17:02:31.906 From Port A Pitch Wheel 9 -5088
17:02:31.916 From Port A Pitch Wheel 9 -5392
17:02:31.927 From Port A Pitch Wheel 9 -5680
17:02:31.937 From Port A Pitch Wheel 9 -6064
17:02:31.947 From Port A Pitch Wheel 9 -6368
17:02:31.957 From Port A Pitch Wheel 9 -6752
17:02:31.967 From Port A Pitch Wheel 9 -7040
17:02:31.978 From Port A Pitch Wheel 9 -7392
17:02:31.989 From Port A Note Off 1 E7 0
17:02:32.045 From Port A Note On 1 E7 127
17:02:32.046 From Port A Pitch Wheel 9 -8192
17:02:32.203 From Port A Pitch Wheel 9 -8192
17:02:32.225 From Port A Note Off 1 E7 0

Is it possible to use a keyboard sounds through midi on Logic 8?

The thing that I'm asking, is to do it the opposite.
I mean, you're able to use your midi controller such as M-Audio with the sounds from the software, for instance "Main Stage part of Logic Pro" , but I'm wandering If you Can do it the opposite way.
Using the Sounds Bank from the Keyboard through the interface and then recording as midi track, no an audio track.

Eriksimon wrote:
Hi Pancenter, other 'old hands',
Hi Erik,
ps Pancenter:
Apple is not really either a hard- or software manufacturer. You are panned hard right there, I'm afraid. Both -wares are too interconnected to separate them like that. The combination is too important for their success - which they needed, back in the 'performa' and '601/4' days... The Pre-imaccian period...
The fact that Logic is now affordable for unwealthy but passionate amateurs like myself, I find wonderful. i had to sell my U220 and X5dr for it - luckily they indeed proved obsolete...
Well, if you ask Apple they will generally tell you they are a Hardware company, the software is there to sell hardware.
Their "key" pro apps are not available on other platforms, they are designed to do one main thing... get the hardware out there, why do you think Apple cut the price of Logic in half and removed the copy protection? A student of mine downloaded the whole f#$%^& program, jam packs and all. For someone who has used Logic since a 2.xx MIDI version and literally spent several thousand on the program and updates, it's somewhat of a slap in the face.
So I disagree, Apple is a mainly a hardware company, their software is designed to promote hardware, their profit is made in hardware sales.
If they were really a software company, support wouldn't cost an arm and a leg as the expense of the software would (somewhat) offset the support costs. (what is it now, $200 a call for pro help?)
I've beta tested enough to know how much time and money software support costs.
pancenter-
p.s. I wish the forum moderators would weigh in on this issue as the forum provides a LOT of support for Apple.

Is it possible to use Loopback in Logic pro 9?

I try to make some goods loops with Logic pro 9, but for live events it's very bad. In mainstage there is a good Loopback, but I need to make some mixage in the same time, and I prefer to use Logic. Is there a solution to use Loopback in Logic Pro 9?
Thank's

Hi
The Loopback plugin is only available in Mainstage, & not within Logic.
CCT

How to tune data loading time in BSO using 14 rules files ?

Hello there,
I'm using Hyperion-Essbase-Admin-Services v11.1.1.2 and the BSO Option.
In a nightly process using MAXL i load new data into one Essbase-cube.
In this nightly update process 14 account-members are updated by running 14 rules files one after another.
These rules files connect 14 times by sql-connection to the same oracle database and the same table.
I use this procedure because i cannot load 2 or more data fields using one rules file.
It takes a long time to load up 14 accounts one after other.
Now my Question: How can I minimise this data loading time ?
This is what I found on Oracle Homepage:
What's New
Oracle Essbase V.11.1.1 Release Highlights
Parallel SQL Data Loads- Supports up to 8 rules files via temporary load buffers.
In an Older Thread John said:
As it is version 11 why not use parallel sql loading, you can specify up to 8 load rules to load data in parallel.
Example:
import database AsoSamp.Sample data
connect as TBC identified by 'password'
using multiple rules_file 'rule1','rule2'
to load_buffer_block starting with buffer_id 100
on error write to "error.txt";
But this is for ASO Option only.
Can I use it in my MAXL also for BSO ?? Is there a sample ?
What else is possible to tune up nightly update time ??
Thanks in advance for every tip,
Zeljko

Thanks a lot for your support. I’m just a little confused.
I will use an example to illustrate my problem a bit more clearly.
This is the basic table, in my case a view, which is queried by all 14 rules files:
column1 --- column2 --- column3 --- column4 --- ... ---column n
dim 1 --- dim 2 --- dim 3 --- data1 --- data2 --- data3 --- ... --- data 14
Region -- ID --- Product --- sales --- cogs ---- discounts --- ... --- amount
West --- D1 --- Coffee --- 11001 --- 1,322 --- 10789 --- ... --- 548
West --- D2 --- Tea10 --- 12011 --- 1,325 --- 10548 --- ... --- 589
West --- S1 --- Tea10 --- 14115 --- 1,699 --- 10145 --- ... --- 852
West --- C3 --- Tea10 --- 21053 --- 1,588 --- 10998 --- ... --- 981
East ---- S2 --- Coffee --- 15563 --- 1,458 --- 10991 --- ... --- 876
East ---- D1 --- Tea10 --- 15894 --- 1,664 --- 11615 --- ... --- 156
East ---- D3 --- Coffee --- 19689 --- 1,989 --- 15615 --- ... --- 986
East ---- C1 --- Coffee --- 18897 --- 1,988 --- 11898 --- ... --- 256
East ---- C3 --- Tea10 --- 11699 --- 1,328 --- 12156 --- ... --- 9896
Following 3 out of 14 (load-) rules files to load the data columns into the cube:
Rules File1:
dim 1 --- dim 2 --- dim 3 --- sales --- ignore --- ignore --- ... --- ignore
Rules File2:
dim 1 --- dim 2 --- dim 3 --- ignore --- cogs --- ignore --- ... --- ignore
Rules File14:
dim 1 --- dim 2 --- dim 3 --- ignore --- ignore --- ignore --- ... --- amount
Is the upper table design what GlennS mentioned as a "Data" column concept which only allows a single numeric data value ?
In this case I cant tag two or more columns as “Data fields”. I just can tag one column as “Data field”. Other data fields I have to tag as “ignore fields during data load”. Otherwise, when I validate the rules file, an Error occurs “only one field can contain the Data Field attribute”.
Or may I skip this error massage and just try to tag all 14 fields as “Data fields” and “load data” ?
Please advise.
Am I right that the other way is to reconstruct the table/view (and the rules files) like follows to load all of the data in one pass:
dim 0 --- dim 1 --- dim 2 --- dim 3 --- data
Account --- Region -- ID --- Product --- data
sales --- West --- D1 --- Coffee --- 11001
sales --- West --- D2 --- Tea10 --- 12011
sales --- West --- S1 --- Tea10 --- 14115
sales --- West --- C3 --- Tea10 --- 21053
sales --- East ---- S2 --- Coffee --- 15563
sales --- East ---- D1 --- Tea10 --- 15894
sales --- East ---- D3 --- Coffee --- 19689
sales --- East ---- C1 --- Coffee --- 18897
sales --- East ---- C3 --- Tea10 --- 11699
cogs --- West --- D1 --- Coffee --- 1,322
cogs --- West --- D2 --- Tea10 --- 1,325
cogs --- West --- S1 --- Tea10 --- 1,699
cogs --- West --- C3 --- Tea10 --- 1,588
cogs --- East ---- S2 --- Coffee --- 1,458
cogs --- East ---- D1 --- Tea10 --- 1,664
cogs --- East ---- D3 --- Coffee --- 1,989
cogs --- East ---- C1 --- Coffee --- 1,988
cogs --- East ---- C3 --- Tea10 --- 1,328
discounts --- West --- D1 --- Coffee --- 10789
discounts --- West --- D2 --- Tea10 --- 10548
discounts --- West --- S1 --- Tea10 --- 10145
discounts --- West --- C3 --- Tea10 --- 10998
discounts --- East ---- S2 --- Coffee --- 10991
discounts --- East ---- D1 --- Tea10 --- 11615
discounts --- East ---- D3 --- Coffee --- 15615
discounts --- East ---- C1 --- Coffee --- 11898
discounts --- East ---- C3 --- Tea10 --- 12156
amount --- West --- D1 --- Coffee --- 548
amount --- West --- D2 --- Tea10 --- 589
amount --- West --- S1 --- Tea10 --- 852
amount --- West --- C3 --- Tea10 --- 981
amount --- East ---- S2 --- Coffee --- 876
amount --- East ---- D1 --- Tea10 --- 156
amount --- East ---- D3 --- Coffee --- 986
amount --- East ---- C1 --- Coffee --- 256
amount --- East ---- C3 --- Tea10 --- 9896
And the third way is to adjust the essbase.cfg parameters DLTHREADSPREPARE and DLTHREADSWRITE (and DLSINGLETHREADPERSTAGE)
I just want to be sure that I understand your suggestions.
Many thanks for awesome help,
Zeljko

Is it possible to use logic rules to manage email submission receipts?

Similar Messages

Maybe you are looking for