Is it possible to use management Vlan as FT Vlan for ACE4710?

Is it allowed to configure ACE4710 management vlan as a FT vlan between two appliances? If allowed, what's the consequence of not using a dedicated FT Vlan?
Thanks a lot

You should not have any other traffic on the dedicated FT vlan.
This is from the docs.
Note Do not use this dedicated VLAN for any other network traffic, including HSRP and data
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A2/configuration/administration/guide/redundcy.html#wp999787
Having any other traffic on this vlan could cause a problem with FT heart beats being dropped, and both ACE could become active. Definitely use a dedicated FT Vlan.
Regards
Jim

Similar Messages

  • Is it possible to use an iPhone as a controller for iPad (for games).

    Is it possible to use an iPhone as a controller for iPad?
    And if so what apps are supported.
    And will gta 3, vice city, San Andreas and dead trigger 2 work with it.

    The only game I know of that does this is "The Incident" - it's not a built-in iOS feature. The developers of that game specifically have allowed it.
    http://bigbucketsoftware.com/theincident/

  • Is it possible to use an iMac as the display for a Mac mini?

    Is it possible to use an iMac as the display for a Mac mini?

    iMacs late 2009 or newer can be used in Target display
    mode.  Any older, no can do.
    The only other way is via network Screen Sharing or
    some otherVPN network like solution.  The issue here
    though is that video performance will be pretty severely
    hampered.

  • Is it possible to use 3D objects in Flash CS4 for animation?

    Hi,
    Is it possible to use 3D objects created in 3D Max, Blendor, iClone etc. to perform animation to make Flash Movie more realistic? Can I make nice animations like in iClone 4 Software?
    If it is possible to use 3D Objects in Flash, please provide a sample Tutorial Link if you have any.
    Thanks in advance.

    Here are some links to 3d tutorils which u might find useful
    http://www.adobe.com/devnet/flash/3d_animation.html
    http://www.adobe.com/designcenter/flash/articles/lrvid4059_fl.html
    http://www.flashandmath.com/flashcs4/
    http://www.kirupa.com/developer/flashcs4/intro_3d_flashcs4_pg1.htm

  • Is it possible to use CC 5.7 to compile for Solaris 6/7 platforms?

    Hello,
    we are currently upgrading to the new CC 5.7 from CC5.2 (Forte Update 1). One advantage we notice is the new, simplified licensing scheme, and hence the possibility to get rid of the license server installations. However, we still have to support our product on Solaris 7 (and possibly, though unlikely, Solaris 6).
    Because CC 5.7 only installs on Solaris 8, the question is whether it would be possible to cross-compile for those older platforms (e.g. via -xarch). (And use our Solaris 7 installations only for testing, not compile-purposes anymore.)
    Your help is greatly appreciated!
    Many thanks,
    Andreas

    Programs built on Solaris 8 usually will not run on Solaris 2.6 or 7, no matter what compiler you use. Sun Studio 9 (C++ 5.7) supports only Solaris 8, 9, and 10.
    You need to build your applications on the lowest version of Solaris that they are intended to be run on. Maybe you could build on Solaris 7 using FD6u1, and again on Solaris 8 using Studio 10 for customers using Solaris 8 and later.

  • Is it possible to use variable with interval in BEX for filter or pl funct.

    Hi,
    we have filters in which variables with interval are being used, as well as planning functions in which a variable with interval should be used.
    In the planning modeler everythings works fine. But I have problems to fill values for these type of variables. The error message "specify a value for variable xxx " is always generated. I know it is possible to do this (with VAR_LOW & VAR_HIGH instead of VAR_VALUE).
    Can someone please help?
    regards
    D

    Hello Dries,
    yes, it's possible. You have to use VAR_VALUE_LOW and VAR_VALUE_HIGH.
    Regards,
    Marc
    SAP NetWeaver RIG

  • Is it possible to use the snow leopard install disk for bootcamp setup?

    I'm going to be installing a windows 7 partition through bootcamp on my macbook, but I can no longer find the two original install disks that it came with. So my question was whether or not its possible to go through the bootcamp process with the snow leopard install disk?

    Do you mean a "Retail OSX Snow Leopard Install DVD for USD 29" ?
    If so, then yes. use it.
    Sounds to me like the Original Install Discs you refer to are OSX 10.5 Leopard ones, right ?
    These won't work with Windows 7 since Windows 7 requires OSX Snow Leopard DVD at minimum for the Driver Installation and BootCamp Assistant version 3.x as well, which is also only avaiable in OSX Snow Leopard.
    http://support.apple.com/kb/HT1899
    Stefan

  • Possible to use T-Mobile MDA as modem for iBook G4??

    Is there any way to use a T-Mobile MDA phone as a modem (bluetooth or USB) for my iBook G4?

    I use a Belkin BT adaptor and essentially it sees the MDA but when i attempt to browse it the Mac says the device doesn't have necessary services.
    If you manage to work out what they are could you let me know?

  • Possible to use Time Capsule as back up for one computer and not another?

    Here is what I want to do. I want to use this as a router wireless router for wi-fi. I have a mac so I want my data to be backed up automatically. now my brother also has a laptop and want him to use the wifi, but i dont want him to access any of my backed up files. is this possible? what are the steps? he has a pc thanks.

    Hi Bob,
    Thanks for the warm welcome.
    Yes, I did some research on the echolife and I don't think it has WDS functionality available. I do have another 3Com router that I'm thinking of firing up again. I know it has WDS functionality. The question is, would the Time Capsule be compatible with it in order to extend the network? I am not keen to shell out for another Apple base station if at all possible.
    Regards,
    /Brian

  • Is it possible to use an iMac as a display for other machine?

    It looks like my 2009 iMac 27" is slowing right down, is there a way to use it as a monitor for say a mac mini, or even as a second display to a new iMac?

    Take a look at this link, http://support.apple.com/kb/HT3924

  • Is it possible to use an iPad as the display for Mac Mini?

    Can an iPad 2 be used as the monitor on a Mac mini? Either by using Air Display or by cabling?

    Yes !
    You can use iPad as the display for your mac mini. but it will be your secondary display .. i.e. you need to have a primary display other that iPad.
    use teamviwer for that.

  • Is it possible possible to use a WD "My Passport for Mac" External HD with a Chromebook?

    Hello . . .
    I am a photographer who is seriously thinking of purchasing a Chromebook to utilize for both online and offline editing while in the field. I'm wondering if it is possible to use a Western Digital "My Passport for Mac" to store and retreive my images as an external drive for both storage and retrieval using a CB.
    Does any one know if I will have to do any special formatting to use this drive with a Chromebook? And, if so, what do I need to know/do to do it?
    Thanks very much for any information that might be provided.
    David
    Solved!
    Go to Solution.

    The "My Passport for Mac" is listed here (both the WDBLUZ0010BSL-NESN and the WDBZYL0020BSL-NESN).
       Chromebook compatible external drives 
    For other help with Chromebooks, it's best to visit the Chromebook Forum.
    -Jerry

  • Using a View as the DataSource for a Matrix

    Does anyone know if it is possible to use a view as the datasource for a matrix?  For example, I have created a view named 'VW1' with 4 columns (1 being ItemCode).  Here is the code that tries to set this view as the datasource for a matrix:
    tableName = "VW1";
    dbDataSource = sboForm.DataSources.DBDataSources.Add(tableName);
    // Add the bind columns
    column = columns.Add(COL_VALUE_UID, SAPbouiCOM.BoFormItemTypes.it_EDIT);
    column.DataBind.SetBound(true, tableName, "ItemCode");     
    This last line of this code hangs but if I put a try around it, the GetLastError does not return anything.  Is it because views cannot be used as datasources or is there something else I am missing?

    Hi David,
    You can use a view as a matrix datasource if you use UserDataSources instead of DBDataSources.
    UserDataSource DSSubJobID = form.DataSources.UserDataSources.Add("SubJobID", SAPbouiCOM.BoDataType.dt_LONG_NUMBER, 12);
    Col = GridMain.Columns.Item(ColSubJobID);
    Col.DataBind.SetBound(true, "", DSSubJobID.UID);
    You then need to manually set the value of the UserDataSource e.g:
    Reader = Command.ExecuteReader(CommandBehavior.SequentialAccess);
    GridMain.Clear();
    int RowNo = 1;
    while (Reader.Read())
       DSSubJobID.Value = SubJobID.ToString();
       //set other user datasources here
       //add a row the matrix
       GridMain.AddRow(1, -1);
    Regards, Lita

  • Using the same Asset Master Record for similar assets

    Dear all,
    I would like to ask if it is possible to use the same asset master record for multiple assets which are similar. The assets will be posted in different periods / fiscal years and therefore the depreciation would change and be charged according to the useful life of the individual assets posted to the same master record and which in turn will vary according to periods / fiscal year posted.
    For example, an asset master record is created for Vehicles. The 1st vehicle with a useful life of 4 years is depreciated at the start of the year for 4 years. The second vehicle is purchased on 6 months after on the 1st June using the same asset master record. However the depreciation is not worked out over the same useful life of the previous vehicle but is extended for a further 6 periods. Is this possible and how is it done.
    Many thanks for any feedback and help.
    Thanks
    PRG

    Dear Peter
    What is the issue in case you created separate Asset Master for each Vehcile ? Is there any specific need for you to accommodate all the assets in one single asset master ?
    I don't think it is correct method as per Company's Act. Over and above, how would you plan for the Fixed Assets Register in the given situation ?
    Regards
    Gemini

  • Using Designer to perform reverse engineering for Adabas entities

    Hi Experts,
    Customer will migrate from Adabas to Oracle db. Is it possible to use designer to perform reverse engineering for entities of Adabas?
    Thanks for your help in advance.
    Queenie

    If there is an ODBC driver for Adabas, it MAY be possible, though I have never had an Adabas database to try it on. I know that Adabas isn't natively a relational database using SQL, which is what Designer's Design Capture utility expects, so it will work through ODBC or not at all.

Maybe you are looking for