Is it possible to use my "My Passport Essential SE" external hard drive on my PC, and my MacBookPro? Is it possible to reserve like 300gb for my PC, and 700GB for my MBP? please advise

I have a 1TB external hard drive, and I just thought of the idea. If it would be possible to seperate space's with in the external HD. Like can I save 300gb off my PC, and 700gb off my MBP?
Please advise

All you need to do is create 2 partitions on the hard drive. Format the Mac partition as GUID Mac Extended (Journaled) NOT case sensitive. When that's done, connect the drive to your Windows machine and format the other partition you just created with NTFS.

Similar Messages

Is it possible to use Boot Camp to partition an external hard drive so there is a OSX partition and a Windows partiton? I want to use the external drive for backup only, NOT to load Windows and NOT to use as a boot drive.

I have partitioned the internal hard drive and am running Lion and Win7 Pro on my iMac i5 2.7GHz with 16GB RAM. Can I use Boot Camp to create a Windows partition on an OSX external hard drive to use for backing up both systems to the same HDD? I do NOT want to install OSX Lion or Windows 7 Professional on the external drive. I do NOT want to boot either system from the external drive. The 3TB external drive is for backup only.

Use NTFS for Windows and buy Paragon NTFS for OS X
You can also try Paragon HFS for Windows
As long as you are using for data and backups, you can leave the drive as GPT too.
I would recommend strongly to always have a 2nd bootable Mac OS drive, only need 30GB partition. System maintenance. Though LIon Recovery Mode finally makes it less but not totally unneeded.
And yes you can use Windows to create a partition.
Boot Camp is too broad. Do you want or mean BC Assistant? not needed but probably possible.
MBR has trouble with 3TB drives.

How can I use my time capsule with Ethernet cable? How is it also possible to use time capsule as a normal external hard drive?

My problem is that I don't know how to use my Time Capsule with Ethernet Cable, as when I use wireless it is really slow.

Make sure that there is an Ethernet cable from one of the LAN <-> ports on your modem/wireless router to the WAN port on the Time Capsule
Click on the Wireless tab at the top of the page
Change the setting for Wireless Mode to Off (I assume that you do not want the Time Capsule to provide a wireless network since you already have a wireless network)
Next, click the Internet icon at the top of the screen, then click the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Click the Update button at the bottom and wait 30 seconds for the Time Capsule to restart and display a green light
Then, you must power off your entire network...all devices....in any order that you want
Wait a minute
Start your modem/router first and let it run a minute
Start the Time Capsule and let it run a minute
Keep starting devices one at a time until everything is powered up
If you are using Time Machine for backups, you will need to reset the connection because you have changed the way in which the Time Capsule connects to your network
Open System Preferences (gear icon) on the dock
Open Time Machine
Click Select Disk
Click the Time Capsule to highlight it
Click Use for Backup or, it might be Use Disk
Now you can connect your Mac using an Ethernet cable to one of the LAN <-> ports on the Time Capsule to back up using Ethernet. Be sure to turn off the wireless on your Mac before you start the backup.
If you want to backup using wireless, disconnect the Ethernet cable from the Mac to the Time Capsule and turn on the wireless and connect to your wireless network. Your computer will now backup using wireless.

Is it possible to use Lightroom/Photoshop directly from a external hard drive?

As a beginner at Lightroom and Photoshop and still having a large amount of old photos I want to work with, can I leave them on the external hard drive or do I have to import them to work on them? My constraint of course is space. Thanks, Wyndon

Your photos can reside on any hard drive or even a network drive that is connected to your computer. The import process doesn't put the image "in" Lightroom, but rather simply creates a pointer in the database so that Lightroom can keep track the adjustments and changes that you make. Lightroom will create a preview image, and you can control the size of those previews making them smaller if space on your hard drive is limited. You can even move the folder containing your catalog to the external hard drive if you want. This would minimize the amount of space taken by the Lightroom program. The catalog can reside on any hard drive connected to your computer, but cannot be on a network drive.

How to use one music library from one external hard drive on two different computers

I have 57 gigs of music in my itunes library on my laptop (Windows Vista). I backed up the library onto an external hard drive. I would like to play the music on a second computer (Windows XP) without putting the music on the second computer, just keeping it on the external hard drive.
I have the latest version of iTunes and Quicktime installed. In iTunes on both computers, under Advanced Preferences I changed the iTunes media folder location to the folder on the external hard drive and checked the boxes for "Keep iTunes media folder organized" and "copy files to iTunes media folder when adding to library". Also under the File tab, "Organize Library", I clicked on "Consolidate Files" and "Reorganize Files in the folder itunes music".
On the second computer I tried holding SHIFT while launching iTunes until the prompt appears asking to create a new library or point to an existing library. While attempting to point to the new location, I am only able to open the music folder, not set it as the location. In advanced preferences when I click "change" for the itunes media folder location, I can locate the folder but the only button I can click on is "open" or "cancel". "Open" will open the folder showing all my music. I tried typing in the location. It shows the correct location.
I was able to see the songs in the library in itunes on the second computer but it won't play the music. There are no exclamation points next to the songs. I am also able to see the playlists but there aren't any songs in the playlists.
There are no problems with itunes on the first computer. Everything works as it should.
Ideally I would like to use the same folder on the external hard drive for both computers if possible. But for now I want to at least get the music playing with the playlists on the second computer from the external hard drive.
Please help.

See this post on making a split library portable.
tt2

Can I use my time capsule as a external hard drive as well

I want to use my time capsule as a external hard drive as well as a back up disk. Is that possible?

You Can!! But Should you??
Can and Should are different.
Here are the issues.
Store files on the TC.
https://discussions.apple.com/message/24380694#24380694
This is asked several times a day.. obviously people are struggling with their latest SSD being too small.
The TC is not suitable for network file server.. but many people having no choice press it into service as such.
It cannot be partitioned. It was and is and ever shall be a backup device for Time Machine.
Major issues.
1. No backup.. no way Time Machine can backup a network drive. No place to backup to.. So all your files will be at risk. And you will need to buy a third party like CCC to do backup.
2. The TC cannot be partitioned and mixing TM backups and data is not great.
3. The drive is slow to spin up and quick to spin down.. there is no controls.
4. iPhoto in particular can easily corrupt its entire library with wireless networking causing a disconnection to one photo. Even if you do this;;; do not move your photo library... you have been warned!!
5. iTunes will constantly lose connection to the library. The disk is too slow to respond.. itunes on the computer will constantly spit out errors. Even in the midst of streaming the TC can spin down the disk due to caching.
6. Do not use any live files on the TC no matter what else you do.. if you edit files in whatever program the file must be on the local hard disk.
7. The only suitable location for most libraries is a computer. You can plug in an external hard disk.
Read pondini for some work arounds.
Q3 here. http://pondini.org/TM/Time_Capsule.html

Can I use my Time Capsule as a External Hard Drive (through Ethernet) ONLY?

Here is my situation:
I am a college student and have been using my Time Capsule to create a wireless network (or extend a previous one) and also to store my iTunes library content (kind of like a wireless hard drive). I just moved into a new apartment and they already have a wireless network and it works just fine how it is. I know that I can extend the network through my Time Capsule (wirelessly because I don't have a long enough ethernet cord to connect into the existing modem), but I don't need/want to because it would just add another path of access for data to go through. I don't mind just having my computer connect wirelessly to the existing wireless router rather than sending it wirelessly through the Time Capsule which would then just need to send the data to the existing router. It just seems like it would make things slower and I don't want to even deal with it. I hope that makes sense.
This is what I want to do and I'm wondering if it is possible and if so how to do it. First, I want my computer to be connected to the current wireless network (as if I didn't even have a TIme Capsule extending the network) so I can access the internet BUT SECOND, I want to access the iTunes library content I have saved on the Time Capsule through a direct ethernet connection. I have too much content (i.e. movies, music...etc) to be able to save it all on my laptop and so that is why it is on the Time Capsule. So simply, if the Time Capsule is plugged into my laptop, can I have it so it ONLY acts like a normal ethernet connected external hard drive?

TC can be set a number of different ways.. Just run it as a router for now.. ie exactly at default.. The fact that you don't have WAN address or connection is irrelevant.. we can tell the TC to ignore the problem. At default the TC is 10.0.1.1
The only issue you can have is if the wireless network is also 10.0.x.x. if it is change the IP of the TC to 192.168.10.1 (or whatever you like.. as long as it isn't the same).
Use static IP settings for the network in the Mac.. you can use exactly the same IP and subnet the TC passed by dhcp. Just no router (gateway) or dns.. so as to not confuse the main network.
You seem to be worrying to much about getting everything right..
Start.. learn.. it is faster to do it and see what happens.. than keep asking questions.
If you run into a snag disconnect the TC.. or reset to default and ask the specific question.

I have just bought a hdmi tv and would like to view very high quality images, using apple tv, stored on my external hard drive. I also have blue ray movies stored on my external hd. will i be able to stream these to my tv and view them in 1080p?

I have just bought a hdmi tv and would like to view very high quality images, using apple tv, stored on my external hard drive. I also have blue ray movies stored on my external hd. will i be able to stream these to my tv and view them in 1080p?

sorry, why isn't correct?
i try convert video with quick time to apple tv, import in itunes( that's ok) but is impossible to synchronize my apple tv ( unsupported file).
where I wrong?
please could you explain me the correct procedure?
i have some video ( holiday movie an photo movie in mpeg2 full HD) to convert for apple tv, and from 2 years some video editing with imovie.
normally I prepare my video with Imovie, create a file .mov full hd (like master) and with roxio convert file for apple TV.
apple world is new for me, after 25 years with microsoft!
thank so much
mauro

Is it possible to open a program when connecting an external hard drive?

Is it possible to open a program when connecting an external hard drive?
I have a external hard drive with an iphoto library. I just want to connect my drive and automatically see iphoto open! Possible?
I know there are some action scripts, am i right?

Ok, here are the steps to take. Doing this involves generating two scripts, the first of which will have the system monitor the attachment of a hard drive, and the second which will conditionally open iPhoto. To make these and set them up, perform the following steps (it is a little involved, but will get you the result you want):
Script 1: A launch agent to monitor attached hard drives
1. Open the Terminal utility in the /Applications/Utilities/ folder. Then copy and paste the following command into it and press Enter, which will open up an editor program in the Terminal:
pico ~/Library/LaunchAgents/iphotodrive.plist
2. Now copy and paste the following text to the Terminal window in its entirety so it is all entered into the Terminal editor:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
          <key>Label</key>
          <string>local.iPhotoDrive</string>
          <key>QueueDirectories</key>
          <array/>
          <key>WatchPaths</key>
          <array>
                    <string>/Volumes</string>
          </array>
          <key>ProgramArguments</key>
          <array>
                    <string>/Users/USERNAME/Library/iphotodrive.sh</string>
          </array>
</dict>
</plist>
3. Use the arrow keys to navigate your cursor down to the place where it says /Users/USERNAME/Library..., and change the text of "USERNAME" to be the same name as your account home folder. For example, my login name in OS X is "tkessler" so my home folder is also "tkessler," so for me this is what should go in place of "USERNAME" in the text above.
4. Now press Control-O to save the file, and then Control-X to exit the editor (use Control, and not the standard Command key here).
Script 2: A shell script to open iPhoto when your drive is attached
1. Type (or copy and paste) the following command in the same Terminal window to make the second script in the same editor:
pico ~/Library/iphotodrive.sh
2. Now copy and paste the following text into the Terminal editor:
#/bin/bash
if [ -d /Volumes/"IPHOTODRIVE" ]; then
        open -a iPhoto;
fi
3. Again use the arrow keys to navigate, and edit the text IPHOTODRIVE to be the exact name of the drive you would like to spur iPhoto to open. The name will be case-sensitive, and spaces are OK within the quotes.
4. Again save this file by pressing Control-O, then press Control-X to quit the editor.
5. Next ensure this new script can be run, so to do this now copy and paste the following command:
chmod +x ~/Library/iphotodrive.sh
Now to activate these scripts you can log out of your account and log back in, and they should work as expeted, and will launch iPhoto only when a drive named "IPHOTODRIVE" (or whatever you edited this entry to be) is attached to the system. This procedure will create two files at the following locations on your computer, so to undo it simply remove these two files followed by logging out and back in, and you should be good to go:
/Users/USERNAME/Library/iphotodrive.sh
/Users/USERNAME/Library/LaunchAgents/iphotodrive.plist
If you run into any problems, then write back here and we can figure out if there are any nuance details to cover for your setup.

Is it possible to transfer my iMovie library to an external hard drive?

I have just noticed that my fairly new iMac computer's hard drive is almost completely full.
Is it possible to transfer my iMovie library to an external hard drive (that I have plugged constantly into my iMac computer), and still have full functionality of all of my imported movie files in iMovie?

Hi - was searching for something else when I came across this post. This is possible, used to do it myself prior to buying my new iMac. Just be sure to move the entire "iTunes Library" folder out as is. The next time you open iTunes a pop up should appear asking you to find/pick your library (just browse to find it for the system). The same principle will work with iPhoto. Alternatively, I believe if you hold the COMMAND key when selecting the application on the dock it will open a window asking you to select the library you want to open. This way comes in handy when you want to keep two separate libraries (i.e. for really old pictures).
Please confirm it worked for you... would love to know I was of help.
R

I got a macbook pro 2008 and can not back up using time machine. it eject my external hard drive everytime. does someone has a fix???

i got a macbook pro 2008 and can not back up using time machine. it eject my external hard drive everytime. does anybody has a fix???

Does your external hard drive have it's own power supply? It should.
Is your external hard drive formatted with the NTFS file system? It won't work.
It needs to be formatted either with Mac OS Extended or FAT32.
(There are drivers available to add NTFS support to OS X but their quality is unknown, especially the "free" ones.)

How do I use my time capsule as an external hard drive?

I am trying to use my time capsule as an external hard drive but can't figure it out... can anyone help me out?

1. Run AirPort Utility
2. Click on your Time Capsule
3. Click Edit
4. Click on the Disks Tab
5. Click on Enable file sharing
6. Choose the way you want to control file sharing access, whether it is by the Time Capsule password, an independent disk password, or accounts for different users.
7. You should then be able to access your Time Capusle drive from Finder.

I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS without formatting it so that I can use it for Time Machine and the like?

I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS without formatting it so that I can use it for Time Machine and the like?

There aren't any 3rd party apps or anything. I use PC's and Mac's at school and the only computer connected to a printer at my house is a PC so i need access to both

I use My Time Capsule as a external hard drive, can I transfer files other than wirelessly?

I use My Time Capsule as a external hard drive, can I transfer files other than wirelessly?

will TC appear on My desk top?
It will, if you do the following:
Open Macintosh HD and locate the Time Capsule icon under the SHARED heading on the left side of he window.
Click on the Time Capsule icon and a folder representing the drive will appear to the right
Double click the folder and the drive icon will appear on the desktop

I am planning on using my time capsule as a network and essentially an external hard drive - not just back up, is this ok?

I am planning on using my time capsule as a network and essentially an external hard drive - not just back up, is this ok?

Most users should use the Time Capsule for backups. This assumes that "original" copies of your data are on the computer and backups of this data are stored on the Time Capsule.
If either the Time Capsule or the hard drive on your computer fails, there are at least copies of your important data on the other drive.
If you are asking if you can place "original" files on the Time Capsule, do you have a plan to backup those files?
If the Time Capsule drive has a problem....and your only copy of your important data is on the Time Capsule....you will lose everything.
If you are asking if this is OK, the answer for most folks would be "no".
Can you clarify if this is what you are asking?

Is it possible to use my "My Passport Essential SE" external hard drive on my PC, and my MacBookPro? Is it possible to reserve like 300gb for my PC, and 700GB for my MBP? please advise

Similar Messages

Maybe you are looking for