Is it possible to use one of the mac pro's internal hard drives as a external drive that can be accessed by a macbook etc?

is it possible to use one of the mac pro's internal hard drives as a external drive that can be accessed by a macbook etc?

Only if you move it to an external enclosure and let them both access it through a file server. 

Similar Messages

  • Does any one know the hot key / command to hard delete from an external Drive

    Does any one know the hot key / command to hard delete from an external Drive (i.e. delete direct without having to put in trash first)?

    Nothing happens on a hard drive that doesn't involve the computer.
    Here's a list of all the keyboard shortcuts. I don't see anything such as you have described, so perhaps you once used a keyboard macro or have not described what you mean properly.

  • The Mac Pro's internal

    This Apple webpage:
    http://www.apple.com/pro/techniques/microphones101/
    clearly states:
    "All Macs have a built-in microphone"
    This is wrong, isn't it? I'm sure there's no built-in mic on the Mac Pro.
    Steve

    A more appropriate wording might have been "be sure the characteristics of the microphone are matched to the characteristics of the input port."
    mhhh...for me this translates perfectly to "don't plug your 3.5mm headset mic into line-in and wonder why it's not working" . Most of them don't have any kind of pre-amplification built in. I've seen too many threads here (and in other forums) about "how to connect a mic on a macpro" and the misunderstanding of different signal levels and how to deal with them. You're right, my first post was very unprecise.
    Anyway. I agree we both know enough about microphones and how to connect them to inputs. Be it the line-in of an audio card or a phantom powered balanced input on a mixing console.

  • Only using one processor on Mac Pro

    I can't figure out how to tell the software to use the other 3 processors. (Only one lights up in the CPU panel out of the 4) I've searched and can't find any answers...
    Mac Pro 10.4.10 with Logic Pro 8 & 5 gigs ram. Any help would be much appreciated!
    JJ

    Take a look at the first keyboard here:
    http://www.bulletsandbones.com/GB/MIDIControllers.html 
    <hr width="250" align="left">
    HangTime [Will Compute for Food] B-)>
    ♪♫ The Bullets and Bones Band ♫♪
    Disclaimer<hr width="250" align="left">

  • Is it possible to upgrade a mid 2012 Mac Pro to USB 3.0?

    My Seagate portable Free Agent Firewire drive died under warranty. Seagate stopped making portable FW drives and replaced mine with a Backup Plus Slim 2.5 USB 3.0 bus powered drive.
    I have a 4-Core Mac Pro (5,1) running Lion, 24 GB RAM.
    I know I can run the drive in one of the Mac Pro USB 2.0 ports but only get 2.0 speed.
    I checked Sonnet's Allegro USB 3.0 PCIe card. The card will run in a my computer fine, but doesn't support 2.5 bus powered drives.
    Anyone know if anyone makes a PCIe USB 3.0 card that will support a 2.5 bus powered drive, and support booting off it?
    Thanks,
    Steven

    The Allegro does say it's compatible with Mac Pro and OSX 7 - 9. But not 2.5 bus powered drives. Ugh.
    http://www.sonnettech.com/product/allegrousb3pcie.html
    Sonnet Technical Notes
    <edit> Bus-powered 2.5" drives or SSDs are not supported.
    Does not support booting OS X.
    While getting the above, I just noticed Sonnet makes another PCIe: Tango with 2 - USB 3.0 and 4 - FW 800 ports, and these specs don't mention not supporting 2.5 bus powered drives. So I just fired off an email to their Tech Support and we'll see. I'm sure it's more expensive than the Allegro with just a few USB 3 ports, but if it works...
    My prior Seagate drive was a FW 800 and I found that a tad slow but tolerable. But it died under warranty and Seagate no longer makes it or any FW portable drives so they replaced mine with their latest drive, which is USB 3.0. They even bumped me from 1.5 TB to 2TB since they don't make 1.5 TB drives anymore either.
    Since it's brand new in the box and not a refurb, I may just eBay it if I can't find a PCIe for it and get a FW8 drive like you suggest and like I used to have. G Tech makes a nice one, albeit expensive. There are others that are less expensive like OWC, good idea. I'd love to find one that disapates heat better hoping it will last longer.
    Thanks Kappy

  • Adobe uses one of the worst software for its Community

    Really these forums use one of the worst web software I ever came across with. It is slow loading, the interaction is even slower, windows close unexpectedly, I get logged out mid writing a entry, or it just refuses to let me in all of a sudden. I've spend to much time just retyping a message as they just disappear.
    Is Adobe support looking for a more state of the art software to use on these forums?
    Wish list:
    Include a predefined selection of Operating Systems
    Include a predefined selection of type of error (Discussion or question is way to wide)
    Remove all useless and utterly annoying animations
    When starting a new entry STOP MOVING the cursor away from the title to the entry. LET THE USER DECIDE WHAT (S)HE WILL WRITE FIRST
    Instead of your old MacPro you use now, invest in a good webserver park.
    Include a search that works.
    Feel free add more points to this discussion.

    theking2 wrote:
    In IT, everything is possible. Just a matter of money.
    Time that adobe puts its revenue at the right place and starts supporting its customers instead of its shareholders.
    Try to convince Adobe of this, not us fellow users.

  • Is it possible to use markers in a Premiere Pro sequence such as Chapter / Comment / Segmentation and export the XMP metadata for a database so that when the video is used as a Video On-Demand resource, a viewer can do a keyword search and jump to a relat

    Is it possible to use markers in a Premiere Pro sequence such as Chapter / Comment / Segmentation and export the XMP metadata for a database so that when the video is used as a Video On-Demand resource, a viewer can do a keyword search and jump to a related point in the video?

    take have to take turns
    and you have to disable one and enable the other manually

  • CS6 I have a Student and Teacher Edition (incl. 3 license) for Windos. Is it possible to use one of these licenses for mac?

    CS6 I have a Student and Teacher Edition (incl. 3 license) for Windos. Is it possible to use one of these licenses for mac?

    jasontc:
    The answer is yes. If you use the "alias" method (in iPhoto's Advanced Preference pane - don't copy files when importing) you can use your own source folder system. You can also share the source files with another image management application. There are some unique issues, however. Any edit of a photo by iPhoto is not seen by the other application as the edited version is saved in iPhoto's Modified folder. If the other application can perform edits on the source file and save the edits to the actual source file, iPhoto's thumbnail of that file will not reflect the change but the edit will display when you open the photo in iPhoto's edit window or use that photo in a book or slideshow. If iPhoto hasn't edited before hand. If iPhoto edits the other application's edited version the source file is not touched. Also any file added to an existing source folder has to be manually imported into iView and then moved within iPhoto from its roll to the roll representing the source folder it was placed in via the Finder. When moved in iPhoto the source file will physically be moved to that folder in the Finder. Hope I haven't confused you with this convoluted description.
    So with some quirks you can use another application like iView MediaPro on the same set of source files.
    I do the above with iPhoto and iView.

  • How do I set upmy Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.

    how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.  From systems Preferences I must select one or the other.  I want both to work all the time.

    Hi,
    I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
    1. DS: 0FI_AP_4  replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
    2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
    3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
    4. Load the same to a InfoCube (0FIAP_C03).
    Hope this helps.
    Thanks.
    Nazeer

  • On the Mac Pro Desktop can you use a Samsung smart tv as the main and only monitor? Is there any reason one would not do that with a wireless keyboard?

    I have not purchased the Mac Pro yet when I do my thought is to use our Samsung 55" Smart tv as the main monitor along with a bluetooth apple keyboard. Any suggestions would be appreciated

    A TV set is not a Monitor.
    A TV set is intended for displaying moving pictures, and not stable, static pictures, with bright, saturated colors in adjacent areas on the screen without "bleeding", fine lines one pixel wide without vibration, or smooth-edged diagonals in fine text edges.
    The 55" width is beyond your ability to see the screen edges when sitting close. If you sit appropriately far away, the text will be too small to read.
    The Mac requires that any display respond to a query including display_name and capabilities. Many TV sets have a problem "paying attention" to the computer port and responding when queried, so the screen may often remain dark at startup and after sleep, requiring your intervention to show a picture.

  • I am using Illustrator CS5. I am using a certain font and when I make a selection to use one of the letter options or a glyph, it does not take my selection; in other words, nothing changes.

    I am using Illustrator CS5. I am using a certain font and when I make a selection to use one of the letter options or a glyph, it does not take my selection; in other words, nothing changes.

    What font? What system? What Glyph? What language settings? Could be anything. Either way, ask in the AI forum. You'll get quicker answers there - if you provide all the required info.
    Mylenium

  • I am unable to access intranet on my MacBook Pro 13" with OS X mavericks. Is it possible to use files on the Local Area Network?

    I am unable to access intranet on my MacBook Pro 13" with OS X mavericks. Is it possible to use files on the Local Area Network? I use the files on the Local Area Network on my windows computer by typing in the I.P address in the library. Kindly guide me how i can use these files stored over the Local Area Network.

    I disabled GateKeeper's automatic blocking of unrecognised developers, and so I was able to install the driver.
    The Mobile Connect program is now installed, but the computer still does not recognise the modem.
    I also borrowed a USB hub from a friend and it didn't make a difference.

  • All plugins uptodate but on upload file get "USING one of the supported browser with latest Adobe Flash is required to experience enhanced file upload features

    I am freelancer. When I tried to upload files on elance it give following error and disable the upload button:using one of the supported browser with latest Adobe flash is required to experience enhanced file upload features.
    All plugins are up to date. Flash version 11.7 installed.

    I assume Firefox 19 worked fine on the site?
    Some sites may be mistakenly identifying Firefox 20 as Firefox 2, which is a very old version they probably no longer support. As a test, you could "lie" to the site about your Firefox version and see whether that little deception works.
    This take a minute to set up. Here's how:
    (1) Select and copy the following preference name to the clipboard:
    general.useragent.override.elance''.''com
    (2) In a new tab or window, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (3) In the filter box, type '''override''' and pause while the list is filtered
    (4) Make sure '''general.useragent.site_specific_overrides''' is set to its default value of true (or right-click and choose Reset if it is not).
    (5) Right-click anywhere in the preference list area and choose
    New > String
    then paste the preference name you copied. Click OK and enter TEMP or asdf or any text as a temporary placeholder. You should see the preference added in bold. Leave about:config open and switch back to this tab.
    (6) Select and copy the following useragent string to the clipboard ''(it's all one line)'':
    Mozilla/5.0 (Windows NT 6.1; rv:19.0) Gecko/20100101 Firefox/19.0
    (That's Firefox 19 on Windows 7 32-bit)
    (7) In about:config, double-click '''general.useragent.override.elance''.''com''' and paste to replace the temporary text with the new useragent string. Click OK, you're done here.
    Now try reloading a page where you need to upload (use Ctrl+Shift+r) and test that function again. Any change?

  • Hi, While writing an email online using Firefox 3.6.3, I was using one of the "CTRL+left or right arrow" to move the cursor along the text. I must have pressed some other key because the display has become huge - and I can't scroll vertically or horizont

    Hi, While writing an email online using Firefox 3.6.3, I was using one of the "CTRL+left or right arrow" to move the cursor along the text. I must have pressed some other key because the display has become huge - and I can't scroll vertically or horizontally, which makes using the Mail pages of Hotmail impossible. I have since logged in using MSFT Explorer and it works fine. This problem occurs only on the Mail page of Hotmail Live not on the home page or others.
    Could you please let me know if this is a problem with Firefox, or if you have any advice on how to reset the appearance of Hotmail in Firefox?
    == This happened ==
    Just once or twice
    == While I was compiling an email in Hotmail Live

    Wow, lightning fast and absolutely right!
    Thank you so much!

  • I don't own a MAC. I can probably use one at the library. I am trying to publish my book with Apple's ibooks, etc. Since my files are in Word.doc or html; how can I format my book so as to publish it?

    I don't own a MAC. I can probably use one at the library. I am trying to publish my book with Apple's ibooks, etc. Since my files are in Word.doc or html; how can I format my book so as to publish it?
    www.amessageforthehumanrace.org

    Use an aggregator and follow their instructions for formatting.

Maybe you are looking for

  • Day wise cal of FI report...cl/bal..open..bal

    Dear friends,                I am working in FI report (vendor balance for date ranges) .Its a ALV report. I want to fetch the datas for debit , credit,opening balance,closing balance,for the paticular vendor or all vendors for date ranges.the table

  • To get Primary contact name-Oracle Property Manager

    Hi all In oracle Property Manager- Responsibility ABC Telesales Agent--- ebusiness center Here in  Lead Tab ,how to get the name of the table/view in which Primary Contact is populated when i do record history i get ast_sales_leads_ebc_v,but the Prim

  • How to connect one page using button and by link in BSP

    how to connect one page using button and by link in BSP

  • Include a pic in post?

    Hi all, Apologies in advance if this has been discussed before or is covered elsewhere, but I was wondering, how can I include an image in a post?? TIA Blakey

  • Book mark link

    Hi all, i have a problem with the bookmark link of reports , i want to use these link in order to give accesses to users to see a report in share point , but the link is not stable after a day when i tray to accesses the link i get an erorr `access d