Is it possible to use Personal Licensed CC for a Company?

Hi, we would like to use Adobe CC in our company, this company is not media or ad company, i mean we are going to use CC for our needs (not commercial). We would like to buy a Personal License and use in only one computer, or do we have to buy a Company License?
Thanks.

Hi CESAKozmetik
An Adobe ID (email address) is required to be able to sign up for a Creative Cloud membership.
If employee A signs up using ID/email [email protected] then leaves the company, it would be possible to change the Adobe ID/email to [email protected] if they don't already have an Adobe ID with us.
Alternatively you might have a generic company email address that could be used to sign up that doesn't belong to a specific employee.
Does that make sense?
Thanks
Bev

Similar Messages

Is it possible to use Apple's fonts for commercial use?

Is it possible to use Apple's fonts for commercial use?
Thank you very much.

Here's a look at the font agreement section from OS X Mountain Lion:
E. Fonts. Subject to the terms and conditions of this License, you may use the fonts included with the Apple Software to display and print content while running the Apple Software; however, you may only embed fonts in content if that is permitted by the embedding restrictions accompanying the font in question. These embedding restrictions can be found in the Font Book/Preview/Show Font Info panel.
So basically, you need to examine the fonts to see if there are notes on usage restrictions or limitations.

In my family we have 3IPhones 4S, one IPhone5, one IPad3, one IPadMini and two IPad 4. Is it possible to use the same energieadapter for all of those ?

In my family we have 3IPhones 4S, one IPhone5, one IPad3, one IPadMini and two IPad 4. Is it possible to use the same energieadapter for all of those ?

Yes but the iPhone chargers will struggle to charge the iPads ,they need more power than the iPhone chargers produce and with an iPad will charge VERY slowly
The iPad chargers whether 10w or 12 will happily charge all your devices and Apple confirms the compatibility on the relevant web page.

Is it possible to use the same Switch for two different clusters.

I have 10g Rac setup on windows.
Now I am planning to install 11gR2 on different servers.
Is it possible to use the same Switch for two different clusters.

user9198027 wrote:
I have 10g Rac setup on windows.
Now I am planning to install 11gR2 on different servers.
Is it possible to use the same Switch for two different clusters.
Yes. Technically there will not be any conflict as long as the private addresses used by the 2 clusters do not collide, and provided that the switch's port capacity and bandwidth will not be exceeded.
Your NA (netadmin) can also configure the switch to separate the 2 Interconnects from one another (called partitioning when using Infiniband) - if the switch supports such features.
A major consideration is not to make the switch, public. That typically cause a range of problems and can have a serious impact on an Interconnect. But using 2 private networks on the same infrastructure should not have the same problems - if configured and implemented correctly.

Is it possible to use a still store for colorcorrection in FCP X like also exists similar to Color?

Is it possible to use a still store for colorcorrection in FCP X like also exists similar to Color?

DDo you want the image for comparison or to store the correction? If it's just for comparison, the roundabout way is to export a still frame and reimport it.

Im completely new to Mac. Im swapping my windows laptop for macbook pro and looking for network storage solution which the Time Capsule seems to do. Is it possible to use this as NAS for my desktop Windows PC - windows 7

Im completely new to Mac. Im swapping my windows laptop for macbook pro and looking for network storage solution which the Time Capsule seems to do. Is it possible to use this as NAS for my desktop Windows PC - windows 7

Broadly speaking I want some sort of network storage( wireless or through my existing wifi router) that I can access files for both my windows PC and Macbook and also to access files to my iPad/ iPhone. Some sort of backup and sychronisation so that I can access certain files remotely.
Buy a real NAS.. synology or QNAP are the standard... although companies like Netgear and Western Digital and Seagate make them as well.
There is no problem sharing between Mac and PC now.. you do not even need a NAS to do that.. you simply share the hard disk directly. Mac talk SMB.. everything talks SMB nowadays.. so it is easy.
ipad and iphone are not designed to use NAS.. they are designed to backup only to the cloud or itunes.. but you can load an app like file browser if you want.
http://www.stratospherix.com/products/filebrowser/
Remote access to the Apple TC is somewhere between difficult, to impossible from a PC.. Apple use BTMM and iCloud but the service is not offered to PC.
A real NAS will offer HTTPS or SFTP or several other methods.. that both Mac and PC can use.
You simply plug it into the current wireless router.. it is a network device and assessable over the network. It is not necessary to buy another router.. in fact that is a waste.

Using AR Invoice but for Inter-company but with Workflow Approvals

My client is using AR invoices (FV70) for inter-company transactions for other businesses that are not yet on ECC. They also utilize workflow for their normal manual journal entries which can go through up to 4 approval paths one of the latter which requires an inter-company approval. Does it make sense for inter-company transactions that will begin with the AR invoice to go through the same approval paths from the beginning similar to how they wish to do it for regular journal postings (FV50)?

If the location of the companies is the same then Approval Paths does not make sense, however depending upon location changes and more importantly if their are different indirect tax liabilities on the two participating companies then the system might be required.
Regards,
Akhileshwar K

Hi all - is it really possible to use one license for two computers or is it just a rumor?

I heard that it would be possible that you can use one license for two computers. Is that the truth? And if so - how does it work?
Thanks
K

Adobe CC or any perpetual previous version allows you to install & activate it two times (on the same computer or other different one).
As per End user license agreement, only one computer can be used at one given time.
Please refer to:
Licenses and terms of use | Adobe
Adobe - Adobe product license agreements
Hope it helps you.
Regards
Rajshree

Is it possible to use single ssl certificate for multiple server farm with different FQDN?

Hi
We generated the CSR request for versign secure site pro certificate
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
SSL Certificate for cn=abc.com considering abc.com as our major domain. now we have servers in this domain like www.abc.com, a.abc.com , b.abc.com etc. we installed the verisign certificate and configured ACE-20 accordingly for ssl-proxy and we will use same certificate gerated for abc.com for all servers like www.abc.com , a.abc.com , b.abc.com etc. Now when we are trying to access https//www..abc.com or https://a.abc.com through mozilla , we are able to access the service but we are getting this message in certfucate status " you are connected to abc.com which is run by unknown "
And the same message when trying to access https://www.abc.com from Google Chrome.
"This is probably not the site you are looking for! You attempted to reach www.abc.com, but instead you actually reached a server identifying itself as abc.com. This may be caused by a misconfiguration on the server or by something more serious. An attacker on your network could be trying to get you to visit a fake (and potentially harmful) version of adgate.kfu.edu.sa. You should not proceed"
so i know as this certficate is for cn=abc.com that is why we are getting such errors/status in ssl certficate.
Now my question is
1. Is is possible to remove above errors doing some ssl configuration on ACE?
2. OR we have to go for VerisgnWildcard Secure Site Pro Certificate for CSR generated uisng cn =abc.com to be installed on ACE and will be used for all servers like www.abc.com , a.abc.com etc..
Thanks
Waliullah

If you want to use the same VIP and port number for multiple FQDNs, then you will need to get a wildcard certificate. Currently, if you enter www.abc.com in your browser, that is what the browser expects to see in the certificate. And right now it won't beause your certificate is for abc.com. You need a wildcard cert that will be for something like *.abc.com.
Hope this helps,
Sean

Is it possible to use same data source for two info cube

Hi,
My Problem is in BW we can not have value of material at storage location level.In R/3 also value is maintained at plant level.
Then we searched and we found out one hot to doc for summarized display of stock values on storage location level.
Problem is that we have gone live in last December and we are using " 0AFMM_C02 " and it contains around 1,81,26,000 records. and according to note we have to use
"0IC_C03".
Both the cube uses same data sources for the data.So, how to get the data for "0IC_C03".
and how to delete the data of existing info cube.And is it possible to delete data selectively from the info cube.
Pls. help.
Regards,
viren.

Hi,
You can't create update rule from PSA.You can create from the infosource or from ODS or from cube to cube or ODS to ODS.
In your scenario, what you can do is create update rules from the ODS to the new cube and then transfer the data from there. Or from the Infosource create rules to the new data target and then upload the full data and then set up the delta.
Third option is to create update rules from the existing cube to the new cube and then load all the data one time. Then you can deactivate the update rules as that was needed only for 1 time data transfer.
Cheers,
Kedar

Possibility of using E1EDL18-QUALF: PID for DELVRY05

Hi Experts,
I'm trying to use an external number as the inbound delivery number when it is created in SAP via IDOC using basic type DELVRY05 with process code DELS.
I'm looking at the possibility of using the QUALF field under segment E1EDL18 to have the value of PID.
I read in the SAP Help repository that it is possible for Shipments to be created with an external number by using SHPMNT03 with E1EDT18-QUALF: PID and E1EDT18-PARAM: TKNUM and the process code will then take the value of TKNUM to use it as the shipment number when the shipment is created.
I was wondering if the same logic can be used for DELVRY05? If so, what would the value of PARAM be? I have tried using VBELN but it doesn't seem to work.
If you have any suggestion as well for how to be able to use an external tracking number to be the delivery number of the inbound delivery that would be much appreciated.

Hello Dan
Try this:
E1EDL18-QUALF=REP
and then
provide the number in E1EDL20-VBELN.
Also try
E1EDL18-QUALF=REP
and then
provide the number in E1EDL20-LIFEX.
Hope this helps. Let me know how it goes.
I am inspired by the following OSS notes while providing this idea:
171429 - External ID LIFEX in inbound shipping notification
1271934 - Shipment IDOC ASN with LIFEX with more then 10 digits

Possible to use custom email address for eprint?

I have recently picked up an e-print capable printer. From what i see, i have to use the randomly generated @hpeprint.com address. Is it possible to use a custom email address for this printer? If not, will a feature like this be added in the future?
I would prefer to have it connect to my smtp server to recieve mails from an address of my chosing rather that using the hpeprint domain.

The best that can be hoped for right now is to set up a secondary email address such as gmail that you keep private and use only for eprint emails. Set up your new email account to forward all received emails to the ePrint email address of your printer. I am in the process of testing this myself after reading another thread here suggesting it.
Edit: I had hopes for this, but no luck! Get message in Eprint center about too many recipients.Wish HP could fix this.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Is it possible to use the Intel graphics for the display and use the NVIDIA GPU for rendering at the same time?

I have been trying to figure this one out for a couple of days. I found the CUDA mac drivers on NVIDIA's website and installed them. I have been working in Blender. After the driver install I can now switch between CPU and GPU processing, Great. It works, but I am not experiencing decreased render times like I had read about or expected. It's about the same. While using the GPU for rendering, my OS is choppy, leading me to wonder if there is a way to use the NVIDIA just for computing power?
Any help would be grand.
Thanks

No.

Is It Possible to change Chart of Accounts for Existing Company Code

Hi
Please guide me is it possible to change Chart of Accounts ID for Existing Company Code after posting the Documents
Regards
Sreenivasulu

Hi,
Its not possible once you assinged chart to accounts to a company code.
Regards
udayakumar.k

Is it possible to use 1 license on 2 computers at the same time?

Hi,
I've searched through the forums and found some points which cover part of my question, but I would just like to be absolutely clear on something. If somebody is able to help, I would be extremely grateful.
I have one CC license, and it is installed to a desktop PC. However I am often in meetings in different areas of the company's large site - overseeing photography, video shooting, working through designs with clients, etc.
Now I'm aware that I can use my one license to install Creative Cloud apps on 2 computers, but what I specifically want to know is if they can be used at the same time.
I would like the freedom of being signed on and working in, for example, InDesign in my office, but then if I have to shoot across the site to a colleagues office, to be able to take a laptop and work on a different document, maybe on a different app, maybe on the same app, without having to first log out of my desktop PC. Does that make sense?
Like I say, I've seen a number of posts which are clear about the possibility of having all apps on two systems, but a few things I've read have mentioned that both machines/apps cannot be in use at the same time.
Please can somebody clear this up?
Thank you,
-Ben

Does that mean you have to sign out of creative cloud on one machine and sign back in to creative cloud on the other machine to be able to use it?
No. You can be signed in to the Cloud (using the same Adobe ID) on two separate computers at the same time.
If you want to activate the Cloud on a 3rd machine then you need to sign out of one of the other computers.
Your issue on your home computer is unlikely to be related to signing in.
Mac or Windows at home? Which operating system?

Is it possible to use Personal Licensed CC for a Company?

Similar Messages

Maybe you are looking for