Is it possible to use run-time configuration in conjunction with Session Manager?

I'm trying to avoid using MAX, basically because it's a pain for users to configure MAX when the application already knows what the configuration is. I actually get the configuration from a database, but that's another story. I've experimented with run-time configuration (see page 4-31 of the 'IVI Driver Toolset' manual) and it works fine. However, when I try to use this in conjunction with Session Manager, session manager complains that my logical name is not a driver session name. I suspect that Session Manager is looking up logical names from a different source, therefore run-time configuration won't work. Any suggestions? I've attached the files I'm working with.
Attachments:
SessionMgrTrial.zip ‏41 KB

Hello Mark:
The Session Manager GetLogicalNames method does not distiguish between logical names and virtual instrument names. A user of the method cannot ask for just logical names or just virtual instrument names. Right now you always get both. The new function is called InstrSessionMgr.GetNames. Notice that the online help file says Boolean for the flags parameter when it is an enum.
Hope this helps. If you have any further queries, please let us know.
-NI support
National Instruments - Software IS the instrument!
Attachments:
help.gif ‏22 KB

Similar Messages

My iphone 6 turned off while i was using face time and it returns with the screen saying Hello mean its reset automatically how is this possible ? Now it requires an id and password to activate which i do not remember need help ?

My iphone 6 turned off while i was using face time and it returns with the screen saying Hello mean its reset automatically how is this possible ? Now it requires an id and password to activate which i do not remember need help ? but i do remember the id and password which i was using on itunes and Apple store. please i almoost buy it in 890$ so it will be a big lost please help me.

shahzadfromlahore wrote:
Now it requires an id and password to activate which i do not remember need help ? but i do remember the id and password which i was using on itunes and Apple store. please i almoost buy it in 890$ so it will be a big lost please help me
Who set up the phone? Who's Apple ID was used to activate it?

Is it possible to use face time with my iphone4 with 3G when the wi-fi is not avalable because my friend own a 4S and he can? Thank you...

Is it possible to use face time with my iphone4 with 3G when the wi-fi is not avalable

Hi,
The Blurb
The * items message that is at the bottom
*FaceTime video calling requires a FaceTime-enabled device for the caller and recipient and a Wi-Fi connection. FaceTime over a mobile network requires iPhone 4S, iPhone 5 or iPad (3rd generation) with mobile data capability. Availability over a mobile network depends on carrier policies; data charges may apply.
Some features may not be available in all countries or all areas. Click here to see complete list.
It is not specifically saying it is 4G only phones.
It is not saying it is 3G either.
It is not listing an iPhone 4 (only the 4S)
It seems whether 3G can or cannot or if the iPhone can do 4G and it is available it seems that particular model will not.
10:26 PM Friday; March 29, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to use Real time execution trace toolkit with Dual-core processor??

hi there
the situation as follows:
i have a computer (PC and Laptop) types with Dual-core processors, and am trying to do simulation using Multi-core technology and based on different simulation scenarios...starting from sequantial processing,.......Piple lining processing strategy. so that i can differentiate the time delay between those types of processing based on (Using 1 processor then dual-core processor Computers)
my question is: As i read through Ni's white papers i saw many notes refer to Real-time execution trace toolkit to investigate the (processing-time , etc) of multi-core processors in processing diffenent algorithms. My algorithms are to be run on 1 computer with dual-core processor BUT, not in real time environments, that is ( No hardware to be connected to my pc) only algorithms running on my pc....
So, is it possible to use Real time execution trace toolkit or anyother tools in LabVIEW to show processing-delays and/or anyother timing critical issues without using my application for real- time hardware.???
in other words: how to use Real time execution trace toolkit in non-hardware and/or real-time scenarios???
please help me in this.
Any suggestion, comments, feedback.....is absolutely highly appreciated
thanks a lot in advance
Labview Lover

Hey,
The Realtime Execution Trace Toolkit only works for NI RT Targets.
But you can use the Desktop Execution Trace Toolkit, just search for it under ni.com.
Christian

I am using an Macbook pro in conjunction with a Time Capsule. I back up all my aperture librarys on it, but how can i view these images that are stored on the capsule please ??

I am using an Macbook pro in conjunction with a Time Capsule. I back up all my aperture librarys on it, but how can i view these images that are stored on the capsule please ??

If you want to see what is in a file that is backed up by time machine then you have to restore the entire file. Having said that I have had good experience with Time Machine and individual files... if the file is there then all of it's components are almost for sure there. A way to get around this in Aperture would be to use referenced images. The images then still exist as individual files and can be backed up and restored individually. You would have to do so on a file by file basis though and your album information would still only be saved within the Aperture library.

Wants to use my Time capsule hard drive with Plogoplug but I can't... Any Idea on how to...?

Wants to use my Time capsule hard drive with Plogoplug but I can't... Any Idea on how to...?

If the TC is not the main router just bridge it.
Have you tried it with the TC bridged??
You need to describe the full network because we have no idea how all this is setup.

Can. I use my MAC Mini in conjunction with my iMac?

Can I use my MAC Mini in conjunction with my iMAC? I can not upgrade the OS of the iMAC due to software that I need and Lion does not support it.
If I could bounce back an forth or use the software from the MAC Mini with the iMAC, this would solve my dilemma.

Before I buy a networked drive can I use the airport to connect with an external
USB drive and set both macs use the drive as a time machine
Can you hook this up? Sure.
Is is supported by Apple? No.
Some users report that this seems to work when they try it.
Others....like me....have corruption problems anywhere from a few days to a few months after I set up a test....which I do whenever a new version of firmware or a new operating system becomes available.
We cannot predict your results, so if you decide to try this, and your backups are valuable, you might want to have a secondary backup plan in place as well....just in case.

Who uses Final Touch SD in conjunction with FCP? Why? Why not?

Who uses Final Touch SD in conjunction with FCP? Why? Why not?
LM

It is my understanding that Final Touch is much faster than daVinci.
You are in error...
Depends on the operator and the machine. With a DaVinci you are going tape to tape and the colorist is coloring each shot. When they are done, then they press play and all their settings apply in real time as the tapes roll.
With Final Touch, you have to render your final product after you do all the coloring. Typically the render will take longer than it takes a tape to play, depending on the machines processor power. But still, 4-5 hours for a 30-60 minute show...darn slow. If you had the same colorist on both, Final Touch would be slower.
BUT...the advantage is that you color BEFORE you go to tape. So doing your texted and textless outputs are darn easy.
Shane

I am running Lightroom 6 in conjunction with 64 bit Photoshop CS6. I need to install Camera Raw 9 plus other relevan updates for the Adobe Design and Web Premium CS6 package. Running Adobe Application manager finds the relevant updates but won't download

I am running Lightroom 6 in conjunction with 64 bit Photoshop CS6. I need to install Camera Raw 9 plus other relevan updates for the Adobe Design and Web Premium CS6 package. Running Adobe Application manager finds the relevant updates but won't download / install them. Clicking the update button results in an error message "Application Manager has stopped working". This is a windows system running 64 bit Windows 7

update manually:
pre cc updates: http://www.adobe.com/downloads/updates/
cc updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
cc 2014 updates: win (http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html) / mac (http://prodesigntools.com/adobe-cc-2014-updates-links-mac.html)

How to use 45W MagSafe 2 Power Adapter with cable management MagSafe 2 power port macbook air 2013

How to use 45W MagSafe 2 Power Adapter with cable management MagSafe 2 power port macbook air 2013 there's two plugs do I use both for the safety to work or I just one ? Thanks sorry new macbook air 2013 was given to my daughter fir her 18th bday 2 days ago by my brother

No, the one is just an extension cord, just use the 45W charger with its attached thin cord and connect the magnetic magsafe to to the connector on the back left of the macbook Air for use and charging it

White lines using Quick Selection Tool in conjunction with the Content Aware Fill.

When using quick selection tool in conjunction with the content aware fill i get a white line where the image join is.
How do i stop this from happening?
Basically, i need the select tool to 'over select' into the next photo so its a seamless fills.
This isn't a complex seletion, its a photomerge with blank, white areas that i am filling in using content away fill.

thanks for your help.

Using full development system on customized test setup that normally uses run-time - How to do?

I have 8.2 Full Development System (2 copies as there are two of us who write code).
I develop testing systems, each on an individual computer, each customized with a custom built (by me) interface to test and measure perfomance of motors produced on the production line.
In order to modify the program and test it, I have to replace the production set-up computer with my developmental computer, make the changes (and check that they work) and then make the run-time version for the production computer. THEN switch computers. Since I have nearly a dozen different setups, I cannot just make two production test sets of each (one for development and one for production).
Is there an easier way?
Perhaps with HDD in a drawer? But then I'd have driver and version issues.
Is it possible to run the full development system remotely (from the production setup)?
What about a site-license?
Thanks,
Tim K

From the 8.2 Release Notes:
Single-Seat and Multi-Seat Licensing
LabVIEW supports both single-seat and multi-seat licenses. Single-seat
licensing is the use of LabVIEW on up to three computers but by only one
user. Multi-seat, or volume, licensing is the use of LabVIEW on several
computers or by several users. Each seat using LabVIEW must have a valid
license from a license server. Refer to the National Instruments Web site at
ni.com/license for more information.
You are permitted to install LabVIEW on the the pc with the hardware, do the changes and debug, and re-build the app for production.

HT1420 Possibility to use 1 Computer - configured with 2 user accounts - each account uses a different Apple-ID for iTunes authorization ?

I wonder if it is possible to use 1 Computer (Macbook Pro)
- configured with 2 (ore even more) user accounts (i.e. me + my kid)
- and each user account has a different Apple-ID (account) for iTunes purchases & iTunes authorization ?
I woud think that is fine in terms of the underlying license agreement refereing to re-download purchased movies, shows, apps, etc.
However, it seams that there is that miraculous 90 days restriction, which I don't understand, and which allows me only to "authorise" the Computer under one or the other account. The switch is unfortunatelly only possible every 90 days ?!?
Thanks anybody for help
Oliver

The 90 day association doesn't stop you authorising an account, it only stops you from using another account for iTunes Match or automatic downloads or redownloading its past purchases : http://support.apple.com/kb/HT4627
There are a few methods listed on this page for how you could do it e.g. multiple user acounts, same iTunes but you having separate playlists, separate iTunes libraries : http://support.apple.com/kb/HT1495

Is it possible to use my time capsule built in hard drive as a airport disk for my home network instead of just a back up with time machine?

I am setting up a new wireless office system for at my job. We have 5 employees and are looking for a wireless hard drive system for us to dump files on and pull files from. We plan to use dropbox for things we are currently using/modifying but would like a wireless hard drive to store our older and completed information/projects on so we can still access them if necessary without using up all of our dropbox space. I'm looking at either getting the new airport extreme and just hooking up a lard external hard drive to it or getting the new time capsule.
I am wondering if it is possible to use the built in hard drive on the time capsule as a wireless hard drive for collaborating/accessing instead of just as a time machine back up? If so then it seems to make sense to buy the TC w/ 3tb hard drive instead of buying the extreme and a larger external drive.

Yes, it is. Note that both the original and backup copies of a file shouldn’t be on the same drive, as it may fail at any time.
(111643)

Is it possible to use my Time Capsule as an iTunes Media Server?

I've bought a macbook air, which is awesome, but a bit lacking in space, it's already filling up.
At the same time I bought a 2TB time capsule. Although I think the back up features are great, I always had the intention that I'd be able to use the Time Capsule as a wireless, and even remotely accessible, personal cloud, to store some of my bigger files. Namely, my iTunes library and my iPhotos library.
I've been into the Apple Store, and the genius there told me it was a simple as copying the two libraries onto the TC, and then redirecting the apps to look at those libraries. Dead easy.
In theory, this creates a perfect system. I realise there might be a bit of lag retrieving stuff, especially if I'm trying to get a movie off the TC while I'm travelling. But if I've got half a day spare to download it, then it's great to have that option if I've forgotten to copy it to my Mac Book before I leave.
In practice, it doesn't work. Because the TC is being used to keep a back up as well, I can only copy the libraries into the Data folder. And I've read somewhere that this can confuse issues a little bit. Now when I try to navigate to the libraries, connection to the Time Capsule always fails.
I realise I could probably achieve this by plugging an external hardrive into the Time Capsule. But I've got two terabytes of space on the TC, it'll take forever to fill that up with just back ups. I don't feel I should have to buy another hardrive, when I've got a TB and a half of free space waiting to be used.
The only idea I can think of is if I partition the TC harddrive, keeping one half for the back ups, and one half for my media library.
Has anyone actually succedded in doing this? Any ideas or help anyone can offer, this is getting really frustrating, and if it doesn't work, I think I'll have to return the Time Capsule, or scrap the idea of backing up, and just use it as an iTunes server instead.
Thanks.

Hi Latitude Journey
Make sure you do the following if you are planning to load all your library on TC:
Step 1: make sure that you tell iTunes where your media folder is located, under preferences, advanced, chose the location of your media folder (assuming you are using iTunes 10+.
Step 2: Once you are done telling iTunes where your media folder is located (music, etc) make sure you go to users & groups under system preferences (assuming you are running Lion or Mountain Lion OSX) and choose login items, then click the + sign and locate your time capsule from the shared drive section in finder, just chose it (no specific folder) just any folder.
the reason why you should do this, is that if it happen that you restart your mac! iTunes will try to look for the drive that has your media/music that you set earlier in step 2: , and since TC is not an actual NAS drive, it is more like a shared drive, it will take few seconds for the hard drive on it to load, where iTunes will not be able to locate it before it is ready, and thus it will revert to the default location of the media folder which is under music/itunes/itunes media/, and eventually none of your songs will actually work since they are on the TC and not your mac.
doing what i told to do in step 2: will make sure that your TC hard drive is ready before your iTunes try to locate the media folder, where you will be able to play your library without any issues.
failing to do so, most probably you will face the problem where you try to play songs in iTunes and finding that they have exclamation mark next to them, which means that they are missing from the library.
my music library is all located on my Time Capsule, and iTunes runs on my Mac mini (with home sharing enabled), and my iTunes is set to lunch on start up under system preferences/users & groups/login items/.
My mac mini act as a server (don't worry about your mac going to sleep, it will wake up once you try to access your media from other devices) assuming that you have the option wake on LAN enabled under network in system preferences.
This is my setup.
- Mac mini mid 2011, running Mountain Lion and latest iTunes set to launch on startup in case of computer power on or restart so i don't have to worry about launching it manually.
- Time capsule 2 TB, used as network shared hard drive
- MacBook Pro early 2011 running Mountain Lion and latest iTunes
- 2 iPads
- iPhones 4s
- Apple TV 1 and Apple TV 2
all my devices having home sharing enabled under the same account.
i can access my music library from any of my devices easily and problem free.
hope this will help you and other users.
Many thanks

Is it possible to use run-time configuration in conjunction with Session Manager?

Similar Messages

Maybe you are looking for