Is it possible to use sliced images with fluid grids CS6?

I have 2 sliced images that I want to use in my page. The site has been designed with fluid grids CS6. As soon as the page is made smaller 1 of the images shrinks while the other remains the same size. Is there any way to make this work or is it just not possible using fluid grids?

There's nothing on this page.
http://www.lavishvegas.com/las_vegas_barsx.html
If you want images to rescale to device width, the parent container must be fluid (% width). 
The images need a CSS max-width of 100%. DW does this for you when you create a Fluid Grid layout. 
Also, the native image must be inserted into the HTML foreground  with no stated height or width attributes.  If you set the height/width, it won't rescale to viewport width.
Working example:
http://alt-web.com/FluidGrid/Fluid2.html
Nancy O.

Similar Messages

  • Is it possible to use HTML5 tags within fluid grid layouts?

    Hello,
    I want to build my future websites with fluid grid layouts and Dreamweaver CS6 but I don't find any help by searching the internet how I could use the HTML5 tags like "header" "nav" "footer" etc. within the fluid grid layouts automaticly. If I do anything manually it's more error-prone. Or is just the best way to stay with the "normal" div-tags???
    Thank you in advance, best regards ... Björn

    Those tags are equal to a normal DIV and can be used just the same, they are just not built into CS6.
    Mylenium

  • Is it possible to use face time with my iphone4 with 3G  when the wi-fi is not avalable because my friend own a 4S and he can? Thank you...

    Is it possible to use face time with my iphone4 with 3G when the wi-fi is not avalable

    Hi,
    The Blurb
    The * items message that is at the bottom
    *FaceTime video calling requires a FaceTime-enabled device for the caller and recipient and a Wi-Fi connection. FaceTime over a mobile network requires iPhone 4S, iPhone 5 or iPad (3rd generation) with mobile data capability. Availability over a mobile network depends on carrier policies; data charges may apply.
    Some features may not be available in all countries or all areas. Click here to see complete list.
    It is not specifically saying it is 4G only phones.
    It is not saying it is 3G either.
    It is not listing an iPhone 4  (only the 4S)
    It seems whether 3G can or cannot or if the iPhone can do 4G and it is available it seems that particular model will not.
    10:26 PM      Friday; March 29, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Is it possible to use variant configuration (with a Non-SAP solution) when creating ERP sales orders in SAP CRM WebUI

    Hello,
    our customer plans to use a Non-SAP solution for variant configuration (Camos) in SAP ERP (ECC 6.0) and in SAP CRM 7.0 EHP1 as well.
    ERP sales orders (and ERP quotations) should be created in SAP CRM (CRM WebUI).
    Is it possible to use variant configuration (with an external variant configuration tool) when creating ERP sales orders and quotations in the SAP CRM WebUI or do we have to implement SAP IPC for this?
    Thanks in advance.
    Regards,
    AEV

    Dear AEV,
    I think LORD (lean orders) should work with variant configuration as well. In the note 1236015 there is not restriction listed. However you need lord2 activated in ECC, and ECC system should be on EHP4.
    Best regards
    Rene

  • I have a touchscreen laptop running Windows 8.1. Is it possible to use the touchscreen with Firefox? I've installed Firefox but it only works with the mouse etc

    have a touchscreen laptop running Windows 8.1. Is it possible to use the touchscreen with Firefox? I've installed Firefox but it only works with the mouse etc

    Hello Sirving575, sorry but the metro version of firefox has been cancelled, see : https://blog.mozilla.org/futurereleases/2014/03/14/metro/
    thank you

  • Basic Photoshop 101: I want to use an image with an outer glow in another Photoshop document. When I place the image, the outer glow has hard edges where the box of the image cut the glow off. Naturally, I want a soft feathered outer glow. How do I get th

    Basic Photoshop 101: I want to use an image with an outer glow in another Photoshop document. When I place the image, the outer glow has hard edges where the box of the image cut the glow off. Naturally, I want a soft feathered outer glow. How do I achieve that? Thank you.

    That should work out, maybe edit it to force updating in the new image.
    Could you please post a screenshot with the Layers Panel visible?

  • Is it possible to use Speech Recognition with Final Cut Studio?

    Is it possible to use Speech Recognition with Final Cut Studio?
    Using either Speech, AppleScript, Automator or a 3rd party app
    like iListen, can I enable Final Cut Studio apps to respond
    to voice commands?
    (e.g. I say "I" in Final Cut Pro and it sets an in point)
    thanks

    Yes, I wish "Make it really good" and "Fix my rough cut"
    were commmands too
    I did hear from the folks at iListen that
    they are planning on releasing a ScriptPak
    for Final Cut Studio next year which could be
    cool
    and that yes, iListen has some capability to
    integrate Speech Recognition with Final Cut,
    guess I need to give it a try for a test ride

  • Is it possible to use apple tv with my mobile 3g internet connection

    is it possible to use apple tv with my iphone 4s mobile 3g internet connection?

    This has already been discussed here:
    https://discussions.apple.com/thread/4819472?start=0&tstart=0

  • Is it possible to use lite sessions with AppLogic's?

    Hi everybody,
    I have one doubt about lite sessions. Is it possible to use lite sessions with AppLogic's?
    If it's possible, which steps do I have to take to use them?
    Thanks a lot,
    Alberto

    The following is the basic procedure to extend one 802.11n AirPort with another:
    AEBSn - Extending a wireless network Setup
    o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
    o Open AirPort Utility and select the base station that will connect to the Internet.
    o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
    o Click AirPort in the toolbar, and then click Wireless.
    o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
    o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
    o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
    o Enter the base station network and base station password is necessary.
    o Click Update to update the base station with new network settings.
    (ref: Page 46 of "Designing AirPort Networks Using AirPort Utility.)

  • Is it possible to use lion recovery with PPPoE connection?

    hi, i dont have a wifi connection at home.
    but i want to use lion recovery to download a frsh copy of lion and  then make USB flash drive with it.
    is it possible to use lion recovery with PPPoE connection?

    raghav malhotra wrote:
    is it possible to use lion recovery with PPPoE connection?
    No.
    Read more here:
    http://support.apple.com/kb/HT4718

  • IS it possible to use ni-visa with lookout to use an instrument driver

    IS it possible to use ni-visa with lookout to use an instrument driver,, or just use the insturment driver...
    Thanks
    Mark

    Hi Mark,
    NI-VISA is a driver layer that is used to communicate to Serial, GPIB, VXI and PXI platform.
    In reality the drivers that you use with Lookot do not make use of this driver layer called VISA (which is used for the most part in the instrument control area).
    Normally the terminology (Instrument Driver) is not used in Lookout (or in any SCADA system). So the answer for your question is no, you cannot use NI-VISA with Lookout, with Lookout you either use the drivers object that comes with the package or you use an OPC server (normaly provided by the hardware manufacturer, this hardware is normally a PLC) to provide data to Lookout.
    I hope it helps
    Regards
    Andre Oliveira
    Applications Engineer
    National Instruments

  • Is it possible to use a Mac with an embroidery sewing machine?

    Is it possible to use a Mac with an embroidery sewing machine?

    Computer support for that type of equipment is completely up to the company making/selling the embroidery software, not the computer builder. A Mac likely could support any such device BUT the device makers must choose to include Mac software versions. Many specialty software developers are about 15 yeas in the past and thing no one uses Macs, or they are doing the project on a shoestring budget and would have to hire someone on the outside to port the program to Mac.
    As that function is likely of very narrow interest around here, I think you would do better to visit some of the embroidery sites and see if they mention products with known Mac support.
    Otherwise you will have to find the sites for every embroidery machine maker to look for mention of Mac support.

  • Is it possible to use 2 displays with the mac mini

    is it possible to use 2 displays with the mac mini

    I wanted an extended desktop using 2 monitors.
    I am using a Dell Ultrasharp ( has 1 VGA and 1 DVI-D) and a LG W2286 (has 2 HDMI, 1 DVI-D and 1 VGA)
    I ran into a similar issue where initially the mac would not detect the 2 displays and I thought I would share my solution.  I have a Mac Mini 10.8.2 i7 Late 2012.
    I bought a "Cable Matters" brand Mini Display Port | Thunderbolt to DVI Male Cable to have dual monitors.
    I am also using the included in the box  HDMI to DVI-D Adapter from Apple.
    Initial configuration was:
    Mini-Display (Thunderbolt connector) to DVI connected to the LG DVI-D input.
    Apple HDMI to DVI Dongle connected to the Dell DVI-D input.
    What happened was that my desktop was on the LG clear as day but OSX did not see the dell monitor.
    I called apple support and they could not figure out why the mini cant see the dell monitor. I think I discovered that the mac mini could not support 2 dvi monitors.
    I switched the monitor connections.
    The connections that works:
    HDMI out to HDMI in on the LG using a standard HDMI cable.
    Display port | Thunderport to DVI-D on the Dell's DVI-D in.

  • SAP CE 7.2 works fine is it possible to use sap gui with this version ?

    Hello Dears,
    Just installed CE7.2,
    Very easy install thanks for SAP !!!
    Is it possible to use sap gui with this version ?
    I'm trying to use Sap Gui 7100.3.11.1042 but can't get the prompt.
    Thanks for you help.
    Olivier

    Hello,
    So I tried to find the right software but I found only B1DESetup_2.1.zip.
    https://downloads.sdn.sap.com/BusinessOne/B1DESetup_2.1.zip
    Do you have any idea about the right link to download or this is the right file ?
    Thanks
    Olivier

  • How to save/export image with 3D grid

    I am in CS6 with the 3D workspace selected. I need to export/save the image with the grid viewable. I know this is possible as I have seen it on a few other images. The catch is I need it 300 dpi so I cannot just screen shot as png.

    I don't understand what's the problem? Can you please elaborate? Show some code snippets and tell where you stucks on.

Maybe you are looking for