Is it possible to use Speech Recognition with Final Cut Studio?

Is it possible to use Speech Recognition with Final Cut Studio?
Using either Speech, AppleScript, Automator or a 3rd party app
like iListen, can I enable Final Cut Studio apps to respond
to voice commands?
(e.g. I say "I" in Final Cut Pro and it sets an in point)
thanks

Yes, I wish "Make it really good" and "Fix my rough cut"
were commmands too
I did hear from the folks at iListen that
they are planning on releasing a ScriptPak
for Final Cut Studio next year which could be
cool
and that yes, iListen has some capability to
integrate Speech Recognition with Final Cut,
guess I need to give it a try for a test ride

Similar Messages

  • G5 Power PC vs Imac...which is better for editing with final cut studio 2?

    This is my present computer:
    iMac 3.06GHz Core 2 Duo (2008 model)
    4 gigs of 800 mhz ddr2 sdram (this is the max ram for this computer! )
    NVIDIA GeForce 8800 GS 512 MB
    Hard drive: 465 gig (I use mainly external drives for editing)
    I use this mainly for video editing with final cut studio 2.
    Rendering in compressor takes forever!!!
    A friend suggested I pick up a used G5 Power PC.
    I found this one, here are the specs:
    APPLE POWER MAC G5 PowerPC DUAL CORE (2 x 2 GHZ)
    System Mac OSX 10.5.8
    RAM 12 GB
    1 Hard drive of 160 Gb
    Superdrive 16x CD/DVD/DL DVD (32x)
    Video card NVIDIA GeForce 6600 (VRAM 256 Mb)
    3 open PCI-Express expansion slots.
    1x FireWire 800
    3x FireWire 400
    4x USB 1 and 2
    2x Ethernet Port
    2x Displays ports
    Is this insanity or a smart move to move over to the older G5.
    According to my friend, the older G5s are much better at processing video.
    Is a dual 2 GHZ processor enough or would I need a 2.3 or 2.5?
    OR is there another option that someone might be able to suggest?
    I would be so appreciative of any opinions regarding this issue.
    Thanks in advance.
    Bill

    Save your pennies and look for a refurbished or used MacPro. Early 2008 or newer 8 core machines w/8GB of RAM running 4 instances in QMaster will chew through material.
    Beyond running compressor, it is just a better all round machine for editing video.
    • it has multiple internal drive bays which run via SATA connections - much faster than the FW800 limits of the iMac for external drives
    • it has 3 slots which give you the option of an i/o card from AJA, Blackmagic or Matrox so that you can actually monitor your video properly as well as ingest high end formats
    • the slots give you the ability to connect esata raids for even higher data speeds
    • you have much greater flexibility with computer monitors
    • you have much greater RAM capacity
    and so on ...
    x

  • Do you get Quicktime Pro with Final Cut Studio?

    Hi, I want to know if quicktime pro is a standard thing with Final Cut Studio.
    Thanks.

    New Discussions ResponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you by pressing the button over those posts and pressing the button over the post that provided your answer. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
    If we use the forums properly they will work well...
    Patrick

  • Is Quicktime Pro included with Final Cut Studio?

    Wikipedia's article on Quicktime Pro says that a Quicktime Pro license comes with Final Cut Studio. Is that true?
    I have OS X 10.5.8 and FCS 2, but I can't even tell if I have Quicktime Pro. I see Quicktime Player in my applications folder (version 7.6.6), but I don't see Quicktime Pro.
    Is Wikipedia right that I got a QT Pro license with FCS? If so, how do I activate it?
    If not, do I just purchase the upgrade from the Apple Store? How do I install/activate the upgrade it?
    Thanks

    I'd like to re-open this topic. I'm not sure that I have QT Pro either. I recently upgraded the OS to 10.6.4--which included a new QT Player [10.0 (114)]. None of the pro features are there--or the old preferences (or the QT System Prefs). I don't use QT Pro features much, and it's only been about a month since the upgrade, so I didn't notice until now. I used to have it. Did I miss something?
    FCP 6.0.6

  • Help please importing mpeg files to be edited with Final Cut Studio

    Hey everyone, new to the video editing thing. I have a JVC GY-HM100U Pro HD camcorder and a MacBook Pro 5,1 with 2.53 GHz Intel Core 2 Duo Processor, 4 GB 1067 MHz DPR3, NVIDIA GeForce 9400M & NVIDIA GeForce 9600MGT running OSX 10.5.8. Have recorded footage in mpeg4 and want to now edit using Final Cut Pro 7. Have downloaded Quicktime Pro and am still getting a "the movie could not be opened when trying to import the mp4 file. The movie contains some invalid data" window when trying to open the mpeg4 file. I have also downloaded DivX, FF Player, & Handbrake if these help convert to another supported file format. Please help!

    That camera is promoted on the JVC website as being Final Cut Pro compatible.
    Have you tried to import the clips via Log & Transfer?
    You might also want to read up on the [workflow for that type of camera|http://documentation.apple.com/en/finalcutpro/professionalformatsandwork flows/#chapter=6%26section=0].
    Have downloaded Quicktime Pro....
    QuickTime Pro is installed automaticallly with Final Cut Studio. No need to buy it again.
    I have also downloaded DivX, FF Player, & Handbrake...
    That software is all pretty much useless for working with Final Cut Studio.
    MPEG Streamclip is free and much better.
    Tutorials and download links:
    http://discussions.apple.com/thread.jspa?threadID=2059475&tstart=0
    http://discussions.apple.com/thread.jspa?threadID=2070861&tstart=0

  • Is Snow Leopard 10.6 compatible with Final Cut Studio 7?

    Is Snow Leopard 10.6 compatible with Final Cut Studio 7?
    Currently running 10.5.8 and pondering an upgrade. I have to go from snow leopard to lion, and I'm wondering what i'll applications I'll have to

    It is Final Cut Studio 3 or Final Cut Pro 7 and yes it woarks fine in snow or lion

  • New category "Content creation with Final Cut Studio"

    Hi:
    I have found a new "Content creation with Final Cut Studio" category in FCS forum. I don't find clear the kind of questions/issues/discussions to post there !
    http://discussions.apple.com/forum.jspa?forumID=1137
    I think probably someone can clarufy the here !
    Thanks in advance.
      Alberto

    You're Welcome Silal!
    I hope that you receive an adequate explanation there!
    And Thank You, for extending the courtesy, of awarding in Discussions.
    ali b

  • Manuals Included with Final Cut Studio

    How many physical manuals are included with Final Cut Studio? I heard there were 4 for Final Cut Pro and 1 for Color. What about the other programs (Compressor, Motion, Soundtrack, DVD Studio)?

    hey there bgecawich & welcome to Discussions,
    there are 4 volumes for FCS2 User Manual:
    1-Interface, Set-up & Input
    2-Editing
    3-Audio Mixing & Effects
    4-Media Management & Output
    there is a separate User Manual for Color.
    good luck.

  • How different when i5 and i7 work with Final Cut Studio?

    27-inch models only, one of the following:
    2.66GHz quad-core Intel Core i5 processor with 8MB shared L3 cache; Turbo Boost dynamic performance up to 3.2GHz
    2.8GHz quad-core Intel Core i7 processor with 8MB shared L3 cache; Turbo Boost dynamic performance up to 3.46GHz; Hyper-Threading for up to eight virtual cores
    May I get the "up to 2.3x faster performance with Final Cut Studio" with i5?
    Thanks advanced.

    It looks very convincing to pay more for i7. Thanks a lot.
    I agree, and also get 8G or more of RAM like Switch900 suggests. You can save money on that by buying it from a third-party vendor.
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

  • Using Vado HD with Final Cut Express

    I am aware that the VADO HD is not compatible with iMovie, but is it compatible with Final Cut Express? If so, during setup of FCE what option should I use for setup? HD, NTSC, PAL, Apple Intermediate Codec, or DV/Panasonic and then under "use" which option should I use?
    thanks for ALL of the help!
    tom

    crap.
    Ok, maybe you can answer a follow up question. So, I'm new at this.... but I understand that I will have to convert the video then. In that case, is there an optimal video conversion type that I should use so that I lose the least quality? I am using MPEG Streamclip as my conversion tool.

  • Help using m2t files with Final Cut! :D

    Hey everyone! I trying to work with a .m2t file of HD footage I've downloaded, I can't seem to open it with Final Cut or Motion, what will I need to do to access this file? Can anyone help!? Thank you

    Use MPEG Streamclip to demux/convert the m2t file(s) into whatever format matches your FCP Sequence settings.
    -DH

  • Using XGrid with Final Cut Studio 2

    Hi all,
    I'm at the office, we're trying to justify the purchase of a mac pro and another imac. One of the things we're looking to do is use xgrid, or some other distributed computing utility to aide Final Cut pro/studio in rendering and exports. Is there any way to set up Final Cut Pro to utilize xgrid?
    Thanks!

    Compressor, the compression/conversion utility in Final Cut Studio, has the Qmaster clustering system to distribute compression among multiple computers; Xgrid is not required. For more information, see the Qmaster forum.
    Regards.

  • Final Cut Express incompatibility with Final Cut Studio 2

    I recently upgraded to FCS 2. I have several projects created with Final Cut Express HD 3.5.1. I can open all projects created with FCE in Final Cut Pro 6.0 without difficulty. The problem occurs when I "round trip" a clip from Final Cut Pro 6.0 to Soundtrack Pro to remove audio problems. When the edited audio file is returned to the Final Cut Pro project, the audio is out of sync. This only happens when the project was created with FCE HD and opened in Final Cut Pro 6.0. If I make a new project starting from scratch in FCP 6.0 , use the same media, and perform a similar "round trip", the problems dissappears. I would hate to recreate all projects in FCP 6.0. Any solutions?

    chuckz33 wrote:
    Frame Rate to 8000
    Frame rate is fixed to 29.97 ot 25 in FCE. What do you plan with 8000 frames/second?
    HD1920X1080 is a frame size, what is the CODEC used (like H.264,MPEG2, QT animation, etc)?
    Michel Boisssonneault

  • New imac with FInal cut studio?

    Hi everyone,
    I am looking at getting one of the new imacs for video editing (Final cut studio 2). The specs for final cut are 4 gig of ram (for some applications in the bundle).
    I wanted to know, do I have to buy my ram from apple when I buy my mac, or can i upgrade it myself? And if so, would the imac be upto the job? From what I can see there isn't much difference between the new imac and the macbook pro (which is what I was going to get).
    Also, what if the difference in (laymans terms, please) in the intel duo and the intel duo extreme? Is it a big difference for editing, or not worth the extra money?
    Also (apologies for all the questions, i have no where else to get the answers) - can you attatch another display - such as a monitor or laptop to the new macs for editing?
    Thanks.
    Lawrence

    as with all iMac and Macbook computers, there is a complete lack of expansion capabilities beyond a single firewire bus.
    most potential buyers rationlize their purchasing of a lessor machine based upon length of project, type of video, hoping to get by, pick your poison. this is short-sighted as it's irrelevant. video, no matter which flavor, is processor intensive.
    what else will you do with your computer? will you hook up a printer, a scanner, external harddrives, a card reader, a tape machine, perhaps rs422 control? how will you monitor hdv properly? how will you monitor audio? will you wander into surround sound mixing?
    the iMac is a great computer but beware, just because others have used it successfully doesn't mean it's the shoe that will fit your foot the best. as i said, the iMac is woefully inadequate for any sort of expansion beyond a single firewire bus.
    buyer beware.
    zeb

  • How many disks come with Final Cut Studio?

    Sounds like a funny question, but somebody gave me these disks and I just want to know if I have them all before I install, and is there any sequence to the installation?
    Thanks.

    It is indeed a strange question and you were extremely lucky to be given $1,000 worth of DVDs.
    There are 7 discs in FCS 3 and you start off with the Final Cut Studio Install Disc, with which you configure the installation process.
    During the installation process you will be informed when to use the others.

Maybe you are looking for

  • Drawing No at Equipment master

    Dear Matserss I would like to add the Drawing No for all my equipment. B ut there is no field in std functionality. Creation of class is huge task. Because it wont support for the LSWM. The charecteritcis value we cant do thro LSMW. I dont think the

  • Cannot make .war file using tomcat with eclipse and ant

    i have made all necesary configuration for deploying application using eclipse and ant for the tomcat server. when i start the server by clicking the tomcat icon on eclipse toolbar, the message is prompted that "missing application web.xml and using

  • Delete messages older than a date except personal folder

    Hello everyone, I have been spending a lot of time searching and testing how to delete all items older than 6 months in a user mailbox, but this rule it cannot be applied just one personal folder named "personal". I have been reading about retention

  • Assignt cost centers to PSG

    Assignt cost centers to PSG Hi Experts. i create a derivation rule in COPA, and assign Cost centers in it for posting of expenses. when i post a document in FB60, and assign respective cost center the profit segment is not active. i assign the cost e

  • Navigation handlers and user authentication

    I've implemented a system to force user logins based on the code demonstrated here: http://www.jsftutorials.net/jsfNavigation/jsf-login-navigation-redirect.html but I've come across a problem. It seems the navigation handler is called only when JSF n