Is it possible to use the camera while the phone is locked

I would like to be able to use the camera without having to unlock the Blackberry.
Sometimes you want to take a quick picture but you have to unlock the phone and you miss what you wanted.
I would like to know if this is possible

No it is not.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Is it possible to use Aperture 2 while the Aperture 3 trial is loaded?

    Every time I try to open Ap2, Ap3 tries to load.
    Thanks!
    Steve

    Yes it is. Not only that but I found that it's possible to run both Aperture 2 and Aperture 3 on the same network without serial number complaint. I find this helpful merely since I don't find Aperture 3 is quite so rock solid stable so far even though I really enjoy playing around with my full library.

  • Help please:    Newbie.   Just downloaded AE CC 2014.   How to use a camera while at the same time "previewing" a scene?

    When trying to preview a composition in 3d (like you see when people are doing tutorial videos), whenever I click on the preview  (whilst attempting to move the camera around in the scene to preview it), the preview stops  (due to clicking the mouse button).   
    In other words, I cannot play back a preview and manipulate the camera at the same time.   Again, in most tutorials I see online the "teacher" is manipulating the camera while also previewing the scene they are discussing.     I can't do this as every time I click the mouse to manipulate the camera, the preview stops due to the mouse click. 

    Hi Dave...
    I think I may be losing my mind....here it is 2am in the morning.   :  )     
    Your post made me double check what I was looking at, and I think I was wrong.    I was watching a Trapcode Particular video tutorial and perhaps all of the 3D particles in the scene gave me vertigo!    In any event, I think this case can be closed as quickly as it was opened. 
    Cheers

  • Using the camera and the iPhone simulator

    I have tried this with the simulator:
    isSourceTypeAvailable:UIImagePickerControllerSourceTypeCamera
    and it always returns: NO.
    This implies that it is not possible at the moment to use the camera in the iPhone simulator. Am I correct in this?
    Note: In Java Mobile Edition, the mobile phone simulator gives simulated images and video to test camera functionality.

    To record video, you must first check that the camera source type (UIImagePickerControllerSourceTypeCamera) is available and that the movie media type (kUTTypeMovie) is available for the camera.
    The code I added below:
    if (UIImagePickerController isSourceTypeAvailable:UIImagePickerControllerSourceTypeCamera) {
    But I traced the code and found that the if condition returns false. Does that mean I should run the app on the device not on simulator?

  • TS2771 i was using an app while the battery ran over, then when i recharged my ipod, i can no longer open that app anymore. Why?

    i was using an app while the battery ran over, then when i recharged my ipod, i can no longer open that app anymore. Why?

    No idea why.
    What have you tried to solve?
    Have you tried the basics from the manual?
    restart, reset, restore.
    Have you tried removing the app, tehn adding it back?

  • I have recently got a new replacement iPhone 4.  since I got this I have found that my data allowance is getting used up during the night while my phone is charging on the bedside table.  How an I find out what is causing this and stop it happening

    I have recently got a new replacement iPhone 4.  Since I got this I have found that my data allowance is getting used up during the night while my phone is charging on the bedside table.  How an I find out what is causing this and stop it happening?  Some nights the usage is 150 meg!

    You can not access the backup directly.
    Did you restore your replacement from this backup?
    If so then you already have everything in the backup on your device.
    If not, you can wipe the device and restore from this backup:
    Settings > General > Reset > Erase All Content & Settings
    What is it you are worried about losing that isn't already on your current device?

  • I have a Panasonic camcorder PV-GS65 and I used to be able to connect to my iMac and my machine would automatically recognize the camera, rewind the tape, and start the import process as soon as I turned the device on and it was connected.  not anymore

    I have a Panasonic camcorder PV-GS65 and I used to be able to connect to my iMac and my machine would automatically recognize the camera, rewind the tape, and start the import process as soon as I turned the device on and it was connected.  Now my iMac does not even see my device
    Any suggestions?

    You cannot install the apps on the car.
    The cars head unit is merely acting as an interface to the apps on the device.
    If you want to use those apps in the car, plug the device in and leave it plugged in.

  • Is it possible to use an iMac as the display for a Mac mini?

    Is it possible to use an iMac as the display for a Mac mini?

    iMacs late 2009 or newer can be used in Target display
    mode.  Any older, no can do.
    The only other way is via network Screen Sharing or
    some otherVPN network like solution.  The issue here
    though is that video performance will be pretty severely
    hampered.

  • When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get

    When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get the right profile available?

    First, the required profile needs to be present. LR 5.4 supports the X-T1 in terms of understanding its Raw format, but will not come with a profile for every lens which can be mounted onto that.
    A profile is made for each specific lens, as mounted on a certain camera. It can also be used with pictures taken on a different (reasonably similar) camera body than the one originally used during profiling. This is subject to the sensor format: you can employ a given lens profile made for full frame, on an image from a crop sensor behind the same lens - but not vice versa.
    Next, the image type needs to correspond to the image type which has been built into the profile: Raw, or non-Raw.
    Lightroom offers only profiles of the right type for the image(s) concerned. There are many more provided for correcting camera Raw, than for correcting camera JPG. That is also the case with additional profiles, e.g. those accessed via the Adobe lens profile downloader utility.
    Finally, in the event that there simply is no profile out there for a given lens, it is not particularly difficult (though a little tedious) for the end user to generate one, using a further Adobe utility which is downloadable as a package, including a range of checkerboard calibration targets, each of which needs to be printed at a stated physical size.

  • HT2542 Hi, I created a new user on mac, Admin but i can't use adobe CS6 while the original user is admin too and all programs are running normal. How can i solve this problem?

    Hi, I created a new user on mac, Admin but I can't use adobe CS6 while the original user is admin too and all programs are running normal. How can I solve this problem?

    Hi Amanda,
    Software applications are usually installed in the Applications folder on the Macintosh HD and are accessible to all users.
    I would advise you to check the Applications folder and see if your software is in there.
    Next step would be to Control Click or Right Click on the application and choose "Get Info" and make sure the permissions are set to "Read & Write" for all users. The article below provides more details:
    Troubleshooting permissions issues in Mac OS X
    http://support.apple.com/kb/ht2963
    You may need to contact Adobe Support if this does not resolve your issue:
    http://helpx.adobe.com/photoshop.html
    Hope this information helps!
    - Judy

  • IS O&G - is it possible to use MPL without activating the ECC- DIMP?

    Hi
    We are an Oil and Gas industry and activated IS oil and gas in ECC6.0, our requirement is to use functionality such as Master Parts list which is there in ECC-DIMP under configuration control, as some companies within same group where MPL is required .
    The question is it possible to use MPL without activating the ECC- DIMP
    Request you to please help us to understand.
    Regards

    Hi Venkat,
    If a report is created over a DSO, it pulls data from the active table of a DSO. So as suggested in all the posts above it is not possiable to report on the DSO without activating it.
    Activation of DSO only allows to generate SID's to link transaction data and master data, SID's could also be generated at the time of reporting (When the report fetches data from BI server, but for the SID generation data is needed in active table). Also activation checks the correctness of data etc.
    Could you please let know why you want to report on the unactive request, is it having some problem with activation?
    Regards,
    Pankaj

  • Is there a flash when using the camera on the iPad?

    Is there a flash when using the camera on the iPad?

    Unlike iPhone, there's no LED flash on iPad. But iPad's specs indicate that it does have a backside illumination sensor to increase the amount of light captured and thereby improve low-light performance. Apple say:
    "The 5‑megapixel iSight camera features a backside illumination sensor that captures great-looking pictures whether by sunlight or candlelight." (Source)

  • Is it possible to use some product on the unix server at the development level which would make it p

    Hello,
    We are generating editable PDF forms from the scratch at the development level on the unix server. Is it possible to use some product on the unix server at the development level which would make it possible to save these editable PDF forms to be saved using acrobat reader? These forms are used by the end users and the edited files are then saved... Kindly help me in this regard..
    Best Regards,
    Deepak

    Dear Aandi,
    I am really thankful to you for this. I will suggest this to the business and then they can contact adobe for this. Thanking you once again for providing me with all the valueable info. You have been instrumental in helping me out in my project.
    Best Regards,
    Deepak Goyal

  • Is it possible to use virtual chars in the aggregation level?

    Hello,
    Is it possible to use virtual chars in the aggregation level?
    thanks

    Hi.
    See answer of Mr. Gregor Dieckmann in [this topic |BI-IP: Copy planning function from virtual key figure;about virtual KF.
    Regards.

  • Is it possible to use NUMCHARS to display the number of characters in a block of text instead of the whole document? How?

    Is it possible to use NUMCHARS to display the number of characters in a block of text instead of the whole document? How?

    Getting the character count for a paragraph is trivial:
    Sub NumChars1()
    MsgBox Selection.Paragraphs(1).Range.Characters.Count
    End Sub
    Even outputting it to the document is trivial:
    Sub NumChars2()
    With Selection.Paragraphs(1)
      .Range.InsertAfter .Range.Characters.Count
    End With
    End Sub
    The real issue comes when you want to update the document. If the destination paragraph is only ever empty or contains the character count of the previous paragraph, you could use:
    Sub NumChars3()
    With Selection.Paragraphs(1)
      .Next.Range.Text = .Range.Characters.Count & vbCr
    End With
    End Sub
    Cheers
    Paul Edstein
    [MS MVP - Word]

Maybe you are looking for

  • In which tables can I find the sales order item texts?

    Experts, In SD, we have texts on sales order item level. These texts can be filled manually or automatically via access sequences. My question is very simple: in which table can I find these texts? I want to extract them for a big number of sales ord

  • 'Convert CMYK Colors to RGB' still runs havoc in 9! (Plus a PDF version problem)

    This post is to warn people about severe issues, and how to avoid them. Issues with the CMYK color setting in FM9.x have been reported here earlier, such as: http://forums.adobe.com/message/1237696#1237696 http://forums.adobe.com/message/1237852#1237

  • Lucreate failed on solaris 10

    Hi All tried to create a new boot environment using lucreate on Solaris 10 release 10/08 /usr/sbin/lucreate -c live -m /:/dev/dsk/c0t1d0s0:ufs \ -m -:/dev/dsk/c0t1d0s1:swap \ -m /tmp:/dev/dsk/c0t1d0s4:ufs \ -m /usr:/dev/dsk/c0t1d0s6:ufs \ -m /var:/de

  • Can Photoshop CS3 Metadata Be Configured To Identify Camera?

    My metadata panel gives Camera Data (EXIF) details but does not identify the make and model of the camera. A few years ago I am sure I was able to see the identity of the camera. At the time I was using Photoshop Elements 2 and iPhoto 4, together wit

  • Can't open /dev/rdsk/c1t0d0s6

    Hi, one of my file systems is corrupted. When I do #mountall --> I am getting the following /dev/md/rdsk/d50 already mounted checking ufs filesystems /dev/rdsk/c1t0d0s6: No such device or address Can't open /dev/rdsk/c1t0d0s6 /dev/rdsk/c1t0d0s6: CAN'