Is it possible to use the ram from a macbook in a iMac?

I am installing new ram on my Early 2011 Macbook Pro (2.3 Ghz., 13 inch, os x 10.9.4). Can I install the old ram from my Macbook Pro into a Mid-2011 iMac(2.7 Ghz., 27 inch, os x 10.9.4)? These links show the ram specs, and they look identical to me. iMac: How to remove or install memory  MacBook Pro: How to remove or install memory

Yes, it is the same spec.
MacBook Pro:
Maximum Memory
16 GB (Actual) 8 GB (Apple)
Memory Slots
2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM
iMac:
Maximum Memory
32 GB (Actual) 16 GB (Apple)
Memory Slots
4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM

Similar Messages

  • Can I use the RAM from my Edge E420s in my X120e?

    Hi there. Is it possible to transfer the 4GB of RAM from my water damaged E420s to my new X120e which are arriving monday?
    Thanks in advance!
    Solved!
    Go to Solution.

    you can use the ram from the X120e in the E420s.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Will my Macbook 13" late 2006 take the RAM from a Macbook Pro 13" 2.4 Ghz Intel Core Duo?

    I have a macbook 13" late 2006 and i found it was cheaper to buy a 13" Macbook Pro 2.4 Ghz Intel Core Duo Ram, I was just wondering if the ram out of the pro model will fit my older model?

    Some basic guesses from http://www.everymac.com
    MacBook 13" Late 2006 is a MacBook2,1 and that uses PC2-5300 DDR2 667 MHz ram.
    MacBook Pro 13" did not use 2.4 GHz but the first of the 13" models was the MacBook Pro7,1 and that uses PC3-8500 DDR3 1066 MHz ram.
    Those are not compatible and cannot be used interchangeably.

  • Will the ram from a "macbook pro 2.2 GHz Intel Core 2 Duo" work in a "MacBook Pro 2.2GHz Quad-core Intel i7"

    I have a 2008? MacBook Pro 2.2 GHz Intel Core 2 Duo with 4 GB ram.  Can I use 2 GB ram from the old machine in a new MacBook Pro 2.2GHz Quad-core Intel i7 ?
    /bc

    Very likely not.
    RAM gets improved over time like everything else, so if the RAM is too old it won't be compatible with newer machines.
    TO confirm, use Crucial.com and punch in each machine, then read the RAM requirements and specifications, if they match, then your good.
    But I'm willing to bet they won't be beause of the age difference between the two machines.

  • Can I take use the RAM from my old Macbook pro and put in in my new one?

    Hi guys, wondering if I can do this to save money on buying new RAM?
    I have a 13" Macbook pro and have just bought a new 15" Macbook pro
    the 13" Has 8gb of RAM
    the 15" has 4 gb of RAM
    I want to swap them over if its possible.
    This is the info I have on the 2 machines....
    OLD MACBOOK 1(13-inch, Mid 2009)
    SERIAL NUMBER: W8946UD366D
    MacBookPro5,5
    Memory Slots:
      ECC:          Disabled
    BANK 0/DIMM0:
      Size:          4 GB
      Type:          DDR3
      Speed:          1067 MHz
      Status:          OK
      Manufacturer:          0x859B
      Part Number:          0x435435313236344243313036372E4D313646
      Serial Number:          0x00000000
    BANK 1/DIMM0:
      Size:          4 GB
      Type:          DDR3
      Speed:          1067 MHz
      Status:          OK
      Manufacturer:          0x859B
      Part Number:          0x435435313236344243313036372E4D313646
      Serial Number:          0x00000000
    NEW MACBOOK PRO 15 inch (mid 2010)
    SERIAL NUMBER : W80280KUAGZ
    A1286
    macbook pro 15 inch mid 2010
    processor 2.66ghz
    intel core i7
    memory 4gb 1067 mhz ddr3
    intel hd graphics 288nb
    serial number w80280kuagz
    software osx 10.9 (13a603)
    memory
    4gb installed 2x2gb
    your mac contains 2 memory slots each of which accepts 1067 mhz ddr3 memory module, all memory slots are in use

    alex94598,
    the 2011 and 2012 non-Retina MacBook Pros can have a maximum of 16 GB, as can the 2.4 GHz 13-inch Mid 2010 MacBook Pro if it runs OS X 10.7.5 or later.
    dreamtunnel,
    your two MacBook Pros have a maximum of 8 GB.

  • Is it possible to use the mask from one image in other images?

    Hello,
    I'm prepping a product shot to send to  a designer. I always create a mask to 'drop out' the background, so that the designer can pull the product into InDesgin without picking up any of the background.
    I would like to send the designer 3-4 versions of the same shot, with small changes to the shadow detail etc., but I would rather not spend the time creating the same mask 3-4 times.
    Is there a way to create a mask on one image, and then copy that mask and place it in the other choices? Its the exact same shot with the exact same crop so each image would be an exact duplicate.
    I realize I could ask him to choose and mask his top choice, but there is a bit of a time crunch here and a few layers of people to make the final selection, so it would make everything I lot smoother if I could simply send him the finished product without creating a lot of back and forth.
    Thanks so much for any help!
    Ellen

    If the images are exactly the same size then make sure the layer with the mask
    is the active layer and in the other documents go to Select>Load Selection and choose
    your document with the layer mask under Source document and under channel choose the layer mask.
    After the selection loads press the layer mask icon at the bottom of the layers panel.
    MTSTUNER

  • Can I use the charger from white MacBook Pro 13'' with 2012 MacBook Pro 13''?

    My friend has a white macbook, 13''. Can I use his charger to charge my MacBook Pro 13'' (mid 2012)?
    Thanks. Giorgio

    Yes it is possible, as long as the wattage is the same.

  • It is possible to change the display from a macbook pro

    I have a late 2011 macbook pro 15", it is possible to do an update to the display? Like change it for one with more resolution.

    Yes, there is a company that switches apple computer displays.  The one I have heard a lot about removes your screen, and puts on a touch screen display.  It essentially turns it into a mac version of the windows computers that have a screen that flips around and lays flat for easy writing.  I cannot remember the name of the company but I will look around for it.  Just search around on google.  But to be honest it is probabaly cheaper to buy a new mac then to have the display swtiched.  If I remeber correctly its about $1000.  I will keep you updated!

  • Can I use the ram...

    Hi,
    I was wondering if I can use the ram from a Macbook core 2 duo in a Macbook Pro.
    Is it the same?
    Thanks

    Yes. Currently, all Intel Macs except for the Mac Pro and the Xserve use the same type of RAM.
    (21529)

  • Can you use the value from a numeric indicator in a numeric control?

    Hi!
         I have to develop a code where I have to find the maximum value of a waveform and draw a line at 50% of the value. So I chose to find the amplitude of say 10 cycles of waveforms and found the maximum value out of the amplitudes. 
    But my real problem is, I have to use the maximum amplitude value that I get from the max. array VI and put it back in program to calculate the 50% value. 
    So is it possible to use the value from a numeric indicator and put it in a numeric control? Like in MATLAB or C, you give the variable a name and use it later to do any computations. Is it possible to do something similar in LabVIEW? 
    Solved!
    Go to Solution.

    Hi!
         Thank you very much for taking some time out. I have been trying to do this since 2 months and I am stuck right where I am.
    The situation is, I have to calculate the amplitude of the irregular waveform for a few trials and then find the maximum amplitude out of the trials and display a line at whatever % of amplitude the user chooses. I tried using property nodes but I am getting Error 1055 for some unknown reason. Then I decided to draw the line using DC offset but it turns out it calculates the amplitude each time and so the line keeps dancing everytime. Now my challenge is to have the amplitude calculated for say, 20 loops and then calculate the max from that. I ran out of ideas so I am posting here. I am using LabVIEW version 8, and I'll upload a few of my attempts. I hope I am not troubling you'll much.
    Attachments:
    amplitude display.vi ‏217 KB
    amplitude display 1.vi ‏148 KB
    Using property node.vi ‏56 KB

  • Can i be able to use the internet browser on macbook air?

    I would like to know if is it possible to use the internet browser on macbook air because I cannot shop online using safari browser here in China, the only accredited browser to shop online in China is the internet browser , any solution to this please?

    Chrome and Firefox work as well.  I am using Firefox now.
    I am sure there are others people know of but I have not mentioned.

  • Playing sound from my macbook to my imac

    I'm using my iMac as an external display for my macbook pro. Since my iMac does not support thurderbolt, I've had to connect it using a Mini displayport. I've bought a 3.5mm Male to Male Stereo Cable so I could play the sound from my macbook through my iMac but both go silent. Anyone have any suggestion on how I could play sound on my macbook through my iMac?  Thanks in advance.

    Firstn make sure that the male audio cable is plugged into the "audio out" port on the MacBook and is plugged into the "audio in" port on the iMac. Second make sure you are in the MacBook system preferences (Not the iMac) then click headphones. The thing named "Headphones" is your iMac. I hope that helped

  • I would like to extend the screen from my circa 2013 27in iMAC with thunderbolt onto my circa late 2006 imac using the DVI port on that iMAC. Is this possible? If not is there another approach I can use?

    I would like to extend the screen from my circa 2013 27in iMAC with thunderbolt onto my circa late 2006 imac using the DVI port on that iMAC. Is this possible? If not is there another approach I can use? My 2006 iMAC is showing it's age but I figure I can use it as just a monitor just fine. Assuming I can connect the two together.

    That older iMac isn't designed to receive video input through the mini-DVI connection. Only certain newer iMacs are able to be used as displays.
    Your only options are to use something like ScreenRecycler mentioned above.
    ~Lyssa

  • The Wifi storage options are interesting but it seems they only allow to read files from the device on the iPad but not transfer files to the storage device via WiFi.   I'm looking for a possibility to use the iPad for photography while traveling, without

    the Wifi storage options are interesting but it seems they only allow to read files from the device on the iPad but not transfer files to the storage device via WiFi.
    I'm looking for a possibility to use the iPad for photography while traveling, without the access to a computer.
    Shooting photo's in RAW format crates pretty big files that will fill up the iPad's memory pretty fast if you shoot a lot during a (let's say) month long trip.
    my idea was to use load the photo's to the iPad so i could view them and sort out any bad ones. then copy them over to the storage device so i can continue using my CF cards for shooting. I have an image thank for copying the photo's directly to the HDD but it would be so sweet to be able to check them on the iPad before hand.
    any suggestions?

    Check out pogo plug device, it allows you to upload camera roll via wifi.

  • I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too..

    I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too. Any ideas? I'm guessing the only way is to do what I've seen in these community pages which states that it can be done but it will drop the bandwidth by 50%. Thoughts?? Thanks!

    The Cisco/Linksys WRT-54G was one of the very few routers said to be compatible with Apple's implementation of WDS (Wireless Distribution System) settings.
    The info that I have on file indicates that only the WRT-54G versions 4 and under were compatible, so that would be one bridge to cross.
    Even if you find that your Cisco/Linksys might be the right version, Apple never published instructions on how to configure the Express devices with other manufactures, so users were left to their own devices to try to figure out how to get things working. Apple's instructions to connect to other Apple devices are in the link below:
    WDS network
    If you were hoping to use 2 Express devices in this type of configuration...even if it works...the bandwidth penalties will be extremely severe.
    The first Express drops the bandwidth (and speed) on the entire network in half and the second halves everything again. So, the result, in effect would be a "g" wireless network running at 25% speed. Few users would consider installing this type of network.
    At this point, it becomes one of those things where the fact that you might be able to do something does not mean that there would be much value in doing so. But, it is your decision to decide if you want to try to proceed.

Maybe you are looking for

  • Hiding a field in ALV

    Hi    i have created an ALV with series group 20(domestic) and 21(export).my question is that i need a field NETWRIC when i select the series group 21 in the input field and i dnt need it when i use 20 in series group.i like to know is there any way

  • Process for purchase of exciseable raw mateial

    hi MM Expert, For my client there is one scenarioo, 1. they are making po for suppose 1000 rs 1 pcs qty. 2. based on this they do Goods receipt, and capture excise only for 800 rs as actual purchase price is 800. 3. by j1iex we post the excise for ca

  • Resizing columns in a simple table

    Hello, I have several simple tables in my structured FM files.  They were copied from unstructured FM when we went DITA.  I want to resize the columns so the tables look presentable.  I tried to do Table > Resize Colums, but when I run the map throug

  • Disable BP Search Screen in IC based on CAD data

    Hi, We implementing CRM 7.0 IC, with CTI Genesys 7.5.1 (ICI 3.06). I would like to know how to disable BP Search functionality in IC, based on the specific value for the Call Type from CTI (should be passed in the CAD data). For all other Call Types

  • Report script - including info which is not in Essbase

    <p>Hi all of you experts.</p><p> </p><p>Here is a challenge for me. Is it also a challenge for you...oris this just piece of cake??</p><p> </p><p>I need to produce a report script against Essbase, where some ofthe data does not exist in Essbase. I am