Is it possible to use the snow leopard install disk for bootcamp setup?

I'm going to be installing a windows 7 partition through bootcamp on my macbook, but I can no longer find the two original install disks that it came with. So my question was whether or not its possible to go through the bootcamp process with the snow leopard install disk?

Do you mean a "Retail OSX Snow Leopard Install DVD for USD 29" ?
If so, then yes. use it.
Sounds to me like the Original Install Discs you refer to are OSX 10.5 Leopard ones, right ?
These won't work with Windows 7 since Windows 7 requires OSX Snow Leopard DVD at minimum for the Driver Installation and BootCamp Assistant version 3.x as well, which is also only avaiable in OSX Snow Leopard.
http://support.apple.com/kb/HT1899
Stefan

Similar Messages

My MACBOOK Pro turned out to be Snow Leopard, and later upgraded to LION. And update the EFI, I would like to replace the Snow Leopard, EFI can not boot, how do? How to use the Snow Leopard install disk to reduce EFI?

My MACBOOK Pro turned out to be Snow Leopard, and later upgraded toLION. And update the EFI, I would like to replace the Snow Leopard, EFIcan not boot, how do? How to use the Snow Leopard install disk to reduce EFI?

Do you mean some of your software does not work in Lion? Do you want to return to using Snow Leopard? If so, then do this:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

Can I wipe my hardrive before upgrading my Macbook to OS X 10.6 by using the Snow Leopard install CD?

Can I wipe my hardrive before upgrading my Macbook to OS X 10.6 by using the Snow Leopard install CD? Or do I need I need to wipe my computer from the OS X 10.5 CD that came with the laptop?
In other words. If I purchase the Snow Leopard Software for $29, can I wipe my hard drive first before installing it? Or do I need to wipe my hard drive, reinstall OS X 10.5, and then continue to upgrade to Snow Leopard?

If you want to wipe the drive in Leopard, do it from the install disk. Otherwise do it from you Snow Leopard install disc.

Why does my computer keep ejecting the snow leopard install disk

I am trying to upgrade from leopard to snow leopard on my MacBook Pro. However, every time I insert the install disk, the machine whirs for a moment, and then ejects the disk with no error message. I tested my drive with a different dvd and it works just fine. All of my other software is up to date. Any idea what could be causing this or what I can do?

Susan Rule wrote:
I am trying to upgrade from leopard to snow leopard on my MacBook Pro. However, every time I insert the install disk, the machine whirs for a moment, and then ejects the disk with no error message. I tested my drive with a different dvd and it works just fine. All of my other software is up to date. Any idea what could be causing this or what I can do?
Clean the bottom of the disk with a bit of rubbing alcohol and a soft cloth, polish to a shine.
If it's a PowerPC Mac it won't upgrade.
Must be a 10.6.3 Snow Leopard retail disk (white with cat like my avatar)
Try holding the c key down with the disk inserted and then reboot.
If all that fails, the disk is likely bad. It happens.
You can chose to copy it and hope the errors get fixed or exchange it for another with Apple.
Insert your Snow Leopard DVD.
Open /Applications/Utilities/Disk Utility.app.
In the left side of the window, select the “Mac OS X Install DVD”.
Click “New Image” from the Disk Utility toolbar and select where you want to save the temporary image. For “Image Format”, choose “DVD/CD master” and for “Encryption”, choose “none”.
The image extension in the “Save As” box will be .cdr (this is what you want) — click “Save”.
Once the temporary image is created, it will show up on the left side of the Disk Utility window. Select it.
Insert a blank dual-layer DVD
Click “Burn” from the Disk Utility toolbar.

MAC OS X Snow Leopard install disk won't install "with this version"

I am trying to get ready for the Snow Leopard install disk to migrate from Mobile Me to ICloud. However, the disk install I received to start the process won't allow me to install saying I have the incorrect version to do so. I am up to date in all my software installs. What am I doing wrong?
Thanks!

If you have an iMac running 10.7.4 as it says in your profile, why are you installing Snow Leopard? If this is a different computer then it would really, really help to know something about it.

Is it possible to use my snow leopard software for my macbook pro on an iMac or more iMacs?

Here is the reason why i'm asking this question that sounds silly to me in a way...... i got the 2011 15.4inches macbook pro 2 weeks ago ..... it came with the last snow leopard os x but since the lion was out and i was eligible for an upgrade i got it striaght away for free in the apple store and did not use the snow leopard.... now here is the situation.... i was talking to a friend last night and he told me to give him the CD for the OS x snow leopard that he wanted to upgrade his imac to that....but i told him that i did not think that would work because in most cases i know even in windows os these kind of CDs are protected and are made for that pc it is installed on but he kept on insisting it would work and telling me how experienced he is in using a mac for 7 years and what ever cd protection happened to only pc and not mac(the funny thing is that he said he has experience but has never tried it before) so to cut the long story short i told him that i would get back to him....... so here i am again today asking a question that might even prove my thoughts right.....
valuable community.....PLEASE IS IT POSSIBLE TO USE MY MACBOOK PRO OPERATING SYSTEM CD ON A FRIENDS IMAC? because i dont believe it is possible because if it was, no one will ever upgrade to any os in a mac... they will just look for oppotunities to get it from a friend or family who has one.... hope im not the only one thinking that this question is a silly one lol....... please i really need your answers to show this experienced mac user of 7 years since he told me that i can install my os on more macs.... how possible it that...i dont know...
Thanks in Advance for your replies

Hi Chris,
I'm guessing it's the "old" gray disc, which is usually hardware specific to your exact model. I'd keep it if I were you, you may want to install it.

I recently migrated my MacBook from 10.5.8 to 10.6.8, using the Snow Leopard CD I purchased from Apple. Since then I have noticed a strange ozone smell coming from the MacBook in the area where the hinges are to open and close the unit. I was told by Appl

I recently migrated my MacBook from 10.5.8 to 10.6.8, using the Snow Leopard CD I purchased from Apple. Since then I have noticed a strange ozone smell coming from the MacBook in the area where the hinges are to open and close the unit. I was told by Apple that it probably is not serious and is coming from the fans in the MacBook. It is true that the smell/odor is more intense when the fans are working. Apple said I should take the MacBook to an Apple Store to have the hardware checked out. Everything seems to be working correctly. I am backing up automatically wirelessly to a Time Capsule, which I had not done until recently, although I had purchased the Time Capsule in 2009. I have not noticed this odor before. Does anyone suspect something more serious that may be going on?

You may be smelling it because with the new OS the processor is having to work harder causing it to get hotter then it would with the other OS. I can't say there is nothing wrong, but what could be happening is just that, it's getting hotter so the fan is spinning faster and moving more air so you are getting more of the smell then you would before. I would still continue to back it up, and take it to the Apple Store at a Genius Bar and have them look at it to make sure. Was the computer ever in a smoky environment??

Does "Archive and Install" really exists on the Snow Leopard install DVD ?

Well, Mr Magoo really needs your help.
I have an iMac late 2009 edition and the Snow Leopard DVD installer discs.
Reading the little baby paper book manual that came with the discs and the iMac it says on page 54 that i can re-install Snow Leopard by choosing "Archive and Install" or "Erase and Install".
Mr Magoo just can't find that "Archive and Install" choice and have concluded that this is a very bad reprint of a manual from years long ago when it was possible to archive and install or it some joke by Apple.
Unfortunately my 90 days of phone talk to Apple has expired albeit the two year warranty under apple sometimes care program i purchased is still valid.
Help/suggestions on how i can get to do an Archive and Install with the Snow Leopard installer DVD that came with this iMac ?

Dave Sawyer wrote:
You misunderstand what Carolyn wrote. In Snow Leopard, Apple engineered the installer so that any reinstallation over an existing copy is in essence an "archival" install in the sense that it replaces all the OS files while automatically preserving the applications and user settings, just as the old "archive and install" option did, though no longer with the option to not preserve the user settings. So all installations over an existing OS are in essence "archive and install", so Apple removed the extra, now-redundant option.
They also removed the "Erase and Install" option. The only way you get a "complete fresh" installation is if you use Disk Utility to erase the drive. Otherwise the 10.6 installer will install a new set of OS files but not remove your apps and user settings.
If you want to reinstall Mac OS X 10.6 and keep your applications and user settings and data, just do a normal installation over the existing one. If you want to do a completely fresh installation, either starting completely new or restoring user data from a backup, first run Disk Utility from the Utilities menu and erase the drive.
Well, have you tried an Snow Leopard installation on top of a previously installed Snow Leopard.
I must really be an idiot in using the snow leopard installer.
I loaded the optical slot with the Snow Leopard DVD installer and after it opened up on the desk top i double clicked the install icon. That restarted my iMac.
When I launched the installer after selecting my "Language" and then going thru the customization ( for example I don't need all those foreign languages ) and then selecting the drive to carry out the installation the installation starts.
Upon completion all my third party applications were zapped and i only had the Apple applications. There was no "previous" system folder as there used to be in previous operating system installers.
So, honestly, I have no idea how you folks manage to make an Snow Leopard installation over a previously installed Snow Leopard whereby all the third party applications are still there.
Please tell me the steps i should take to make an "archival" install over top of a previously installed Snow Leopard that retains all third party applications.
After my install of Snow Leopard I had to re-install all my third party software applications which in my case are mainly midi/audio programs.

How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.

How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.

Do a backup, preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
OS X Recovery
OS X Recovery (2)
When you reboot, use Setup Assistant to restore your data.

Is there anywhere I can buy the snow leopard software except for eBay or amazon? The apple retail store doesn't carry it anymore

Is there anywhere I can buy the snow leopard software except for eBay or amazon? The apple retail store doesn't carry it anymore

If you are biot in the US call your national Apple Helpline:
http://support.apple.com/kb/HE57
If you're in the UK, use this number: 0871 508 4400
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.

TS3243 My Desktop Mac won't startup, it turns on to the grey screen flashing question file. I have been able to startup from the snow leopard install cd but once I try to repair within DU the disk never appears in the side panel. The only thing there is "

My Desktop Mac won't startup, it turns on to the grey screen flashing question file. I have been able to startup from the snow leopard install cd but once I try to repair within DU the disk never appears in the side panel. The only thing there is "Media"... What can I do? Help!

If Disk Utility cannot see your drive it doesn't look good.
You could try DiskWarrior. It is expensive but can often fix directory structures where DU cannot.
Replacing the drive is also a strong likelihood. If you don't have a fairly recent backup, then it might be worth buying DiskWarrior
additonal notes;
Gray screen appears during startup

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
https://discussions.apple.com/community/windows_software/boot_camp

Neither software upgrade or Snow Leopard install disk will upgrade

Neither software upgrade or Snow Leopard install disk will upgrade
I run 10.5.5 and have tried to update my OSX using software upgrade and when I click install it greys out then a few seconds later it turns blue again and nothing happens.
So I purchased Snow Leopard hoping that would fix the problem. Well I insert the DVD and click install Snow Leopard, same thing, I click the blue install button, turns grey then a few seconds later turns blue again and nothing happens so I CANNOT UPGRADE!!
Anyone have some advice where to start?

Hi eastwooddesign;
Upgrading to fix problems usually doesn't succeed and generally make them worst.
Exactly what Snow Leopard disk do you have?
Did you boot from that DVD?
Allan

Reinstalling using the Snow Leopard Upgrade DVD?

This may be a stupid question, but I need to reinstall my Mac, however I only have the Snow Leopard Upgrade DVD that was shipped to me since I the leopard dvd is stuffed somewhere in the back cupboard that I can't find for love nor money.
Can I erase the hard drive and perform a clean installation from the Snow Leopard Upgrade DVD? I've a feeling that I can't but just wanted to confirm.
Thanks!

Hi thelongmile;
If it is the upgrade DVD then you can't.
Allan

Using snow leopard upgrade disk with bootcamp

I can install snow leopard clean on a fresh drive on my MBP with my upgrade disk.
It is the disk that came as a drop-in dvd with the MBP, along with its original install disks.
If I install windows using bootcamp assistant, do I use that disk when it asks for the drivers, etc. during installation?
Or do I use my leopard install disks that came with my computer?
Is the snow leopard bootcamp process any different from the process in leopard?
I had windows Vista on there fine before upgrading my hard drive and going to snow leopard.
Do I need to print out those 25 pages again?
Thanks for any advice.

Luis Ortega wrote:
I can install snow leopard clean on a fresh drive on my MBP with my upgrade disk.
It is the disk that came as a drop-in dvd with the MBP, along with its original install disks.
Are you asking if you can? Yes, I think you can. The worst case is that you would have to install Leo first and then upgrade to Sno.
If I install windows using bootcamp assistant, do I use that disk when it asks for the drivers, etc. during installation?
Or do I use my leopard install disks that came with my computer?
You would use the Leopard install DVD.
Is the snow leopard bootcamp process any different from the process in leopard?
I had windows Vista on there fine before upgrading my hard drive and going to snow leopard.
Its the same. Just start up the the Boot Camp Assistant and follow the instructions. No need to print the 25 pages again, IMO.
Do I need to print out those 25 pages again?
Thanks for any advice.

Is it possible to use the snow leopard install disk for bootcamp setup?

Similar Messages

Maybe you are looking for