Is it possible to viw the frame rate (fps) on the finder?

I have always been interested to see what the frame rate of my iMac is, but I can't work out how. I've searched the built in help, I have tried to search through the previous discussions on the topic but all with very limited success. There has to be someone who knows out. I've seen it done on Windows but have no idea on OS X. Also if I am playing a game I want to be able to see the frame rate "over" the game (if you know what I mean). Thanks in advance.

The operating system really doesn't have a measureable frame rate other than the refresh of the monitor.
Displaying the framerate in games is determined by the game settings.

Similar Messages

  • Does any know, what the frame rate is for the Creative WebCam NX Ultra

    If you check the specifications, for this webcam. It's listed running 640x480, 320x240, 352x288, and 60x20 resolutions. What is the frame rate? If I run this webcam at 640*480 resolution.
    thanks

    See I knew it! Why can't they make the 30fps at 640*480, thanks guys. Is 5 fps a noticable difference, or what?

  • Is it possible to change the frame rate of a motion template?

    Motion has some very useful templates, but the majority are only offered in NTSC, not PAL. (including all in 3D TEXT PROJECTS).
    Is it possible to change the frame rate to 25fps before I start adding my own stuff, so that I can easily get the timing right for a PAL sequence in FCP.
    If not in Motion, how else could this been changed?

    Try dragging all the groups from one project into another instead - you'll need to open both project and rearrange the windows so you can see the layers tab for both of them.

  • How can I change the frame rate of a project in imovie 10?

    My problem is: I made a gopro movie with a frame rate of 50 fps. I imported it to imovie. So far so good.
    Scrubbing over the clip i found one single frame which looked amazing. So I draged some seconds of that clip into the timeline (the project if you will).
    The goal was to make a freeze frame out of this "spezial" frame.
    Unfortunately I could not find this frame in the timeline any more - it's gone.
    I think imovie dropped half of the frames to fit the clip into the projekt, which I assume is using 24-25fps.
    The only solution I found is to decrease the speed of the clip to let's say 50%.
    But is there a better way?
    Can I change the frame rate of the projekt somehow? I think it was possible in imovie 11.
    many thanks
    Rainer
    (from austria)

    iMovie 10 won't share at 50 fps and so for 25 fps output probably drops every other frame.  This is different from Imovie 9 which could handle 50 fps.  However, if you do 50% speed it will use all the available frames so that is indeed the way to find the frame you want.  After you have made a freeze frame I think you can switch the clip back to normal speed.  I am not aware of a better way in iMovie 10  By the way there is also no facility to export a still of a frame in iMovie.
    As a GoPro user I think FCP 10.1 would be the best choice.
    Geoff.

  • How do you change the frame rate (or fmp) of a project once you have already started?

    I have been working on a project for a long time now, and I just reliezed that the frame rate of the project was 25 where as all my clips were in 30. Is there any possible way for me to change the frame rate even though I've already started the project? or do I have to start again?
    thanks

    Hi,
    I've had a really good search through our documentation and website but there's no previous record of that error code. However, a quick google search turned up lots of things on MatLab user groups and the MathWorks forums.
    MatWork's official stance is that the PCI 7342 is not supported in MatLab. They have a list of supported hardware here:
    https://www.mathworks.co.uk/products/daq/supported/ni-daqmx.html#PCI

  • Can you adjust the frame rate with quicktime?

    I need to slow the frame rate on an .avi file, and I can find how to do that in big chunks, but how to fine tune. Is this possible on the latest release (just downloaded it) and if not can someone tell me what I can use to change the framer ate on the .avi itself (either way is fine)
    I am SO not tech savvy so please assume you are replying to an idiot but thank you very much in advance for any help.

    p.s. I discovered that holding the option button and the fast forward give me this control for speeding things up, but I can't figure out how to slow it down - sorry for the missing info

  • How to get the frame rate of my application

    Hi again...
    How can I get the frame rate of my application?
    I also want the frame rate value to be the title of the frame, updated every second. How do I do that?
    thanks in advance...

    To get the path where your application has been installed you have to do the following:
    have a class called "what_ever" in the folder.
    then you do a litte:
    String path=
    what_ever.class.getRessource("what_ever.class").toString()
    That get you a string like:
    file:/C:/Program Files/Cool_program/what_ever.class
    Then you process the result a little to remove anything you don't want:
    path=path.substring(path.indexOf('/')+1),path.lastIndexOf('/'))
    //Might be a little error here but you should find out //quickly if it's the case
    And here you go, you have a nice
    C:/Program Files/Cool_program
    which is the path to your application.
    Hooray

  • Where is the frame rate setting control when making a slide show?

    I am trying to make a slide show using QuickTime Pro and cannot find the frame rate control.I put all my consectively-numbered jpegs in one folder. I then clicked on "File," the "Open Image Sequence," then a window opened up and I click on the first jpeg in the series of photos I want in my slide show. Then the first image appears in the QT Window. The instructions next say that I should be able to change the rate at which each slide/jpeg appears, but it doesn't tell you where to find the "frame rate" so I can change it. It doesn't appear at all on its own, so where is it? Anything else I'm missing? Thank you.

    barbaric135
    What version of Photoshop Elements and or Premiere Elements are you using and on what computer operating system?
    In addition, could you please clarify?
    It sounds like you are creating your slideshow in the Elements Organizer. Where are you seeing these distortions and blurs, in the Elements Organizer Slideshow Editor Filmstrip or in the Premiere Elements workspace after you have transferred the slideshow from the Elements Organizer 9 Slideshow Editor to Premiere Elements workspace?
    What are the pixel dimensions of the photos in this slideshow and how many of these photos are in the slideshow? What format are they in..jpg, psd, other?
    With regard to what you wrote:
    Also how do I transport them from Elements to Premier, it has a tab to do that but when I get to the elements file I don't know where to drag and drop into.
    If you are in the Elements Organizer Slideshow Editor and use the Output option Edit with Premiere Elements, then you would expect the automatic transfer of the slideshow to Premiere Elements, with a copy in video format (.psess) in the project media as well as on the Timeline. Nothing for you to drag and drop.
    For all those reasons, I am asking for clarification.
    Thanks.
    ATR

  • How can I change the frame rate mode?

    Adobe Premiere Pro exports my videos with a variable frame rate. Because of this long videos are asynchronous. How can i change the frame rate mode? So Adobe Premie Pro exports my videos with a CONSTANT frame rate? The original video  has a constant frame rate...

    Sorry my mistakes. I am from Germany.. so...I mean with asynchronous that the video file and the sound file are displaced. In the beginning of the Video it's normal, but if the videos is very long it goes VERY "asynchronous"
    I analyzed the video with "mediainfo":
    General
    Format                                   : MPEG-4
    Format profile                           : Base Media / Version 2
    Codec ID                                 : mp42
    File size                                : 2.00 GiB
    Duration                                 : 20mn 13s
    Overall bit rate mode                    : Variable
    Overall bit rate                         : 14.2 Mbps
    Encoded date                             : UTC 2013-12-11 13:56:13
    Tagged date                              : UTC 2013-12-11 13:58:30
    ©TIM                                     : 00:00:00:00
    ©TSC                                     : 30
    ©TSZ                                     : 1
    Video
    ID                                       : 1
    Format                                   : AVC
    Format/Info                              : Advanced Video Codec
    Format profile                           : [email protected]
    Format settings, CABAC                   : Yes
    Format settings, ReFrames                : 3 frames
    Format settings, GOP                     : M=3, N=30
    Codec ID                                 : avc1
    Codec ID/Info                            : Advanced Video Coding
    Duration                                 : 20mn 13s
    Source duration                          : 20mn 13s
    Bit rate                                 : 14.0 Mbps
    Width                                    : 2 560 pixels
    Height                                   : 1 440 pixels
    Display aspect ratio                     : 16:9
    Frame rate mode                          : Variable
    Frame rate                               : 30.000 fps
    Minimum frame rate                       : 30.000 fps
    Maximum frame rate                       : 30.030 fps
    Standard                                 : PAL
    Color space                              : YUV
    Chroma subsampling                       : 4:2:0
    Bit depth                                : 8 bits
    Scan type                                : Progressive
    Bits/(Pixel*Frame)                       : 0.127
    Stream size                              : 1.98 GiB (99%)
    Source stream size                       : 1.98 GiB (99%)
    Language                                 : English
    Encoded date                             : UTC 2013-12-11 13:56:13
    Tagged date                              : UTC 2013-12-11 13:56:13
    Color primaries                          : BT.709
    Transfer characteristics                 : BT.709
    Matrix coefficients                      : BT.709
    mdhd_Duration                            : 1213733
    Audio
    ID                                       : 2
    Format                                   : AAC
    Format/Info                              : Advanced Audio Codec
    Format profile                           : LC
    Codec ID                                 : 40
    Duration                                 : 20mn 13s
    Source duration                          : 20mn 13s
    Bit rate mode                            : Variable
    Bit rate                                 : 158 Kbps
    Maximum bit rate                         : 254 Kbps
    Channel(s)                               : 2 channels
    Channel positions                        : Front: L R
    Sampling rate                            : 44.1 KHz
    Compression mode                         : Lossy
    Stream size                              : 22.8 MiB (1%)
    Source stream size                       : 22.8 MiB (1%)
    Language                                 : English
    Encoded date                             : UTC 2013-12-11 13:56:13
    Tagged date                              : UTC 2013-12-11 13:56:13
    mdhd_Duration                            : 1213777
    And there i can read that the "frame rate mode" is variable... and that's the bad thing... I want to change that point to a constant frame rate mode. I use the H.264 codec 

  • Okay so i had an iphone 5.  I backed it up on icloud. Then i got the new iphone 5s i restored ot from icloud from my previous iphone 5.  Now everything works find execept now the games are slowy and drops the frame rate and look choppy. Please help.

    Okay so i had an iphone 5.  I backed it up on icloud. Then i got the new iphone 5s i restored ot from icloud from my previous iphone 5.  Now everything works find execept now the games are slowy and drops the frame rate and look choppy. Then i restarted my iphone 5s as a new device downloaded the same apps even the ones optimized for ios 7 and the games still lag. And i just got my iphone 5s replace.  The funny thing is.  While im playing games and their running choppy and slow and if i take a snap shot inside the phone. They run smooth and HD but just for a few seconds and boom they go back to slow and choppy.  Is it the ios 7 or the iphone 5s it self? Like i said this is my replacement iphone 5s because the other 5s did the same thing. And it was running slowly.

    As far as I know you can't delete the primary email address for an iCloud account.  It's assigned when the account is created.  But your neighbor wouldn't have been able to get into your iCloud account without your Apple ID and password.  Are you sure the account wasn't still on your phone when you gave it to him?
    You could migrate a copy of your data to a new iCloud account but I would still be concerned that someone else was using my old account, which presumably still has your data in it.
    I'm fairly certain that you're going to have to have iCloud support help you sort this one out as they may have the ability to make changes to an existing account that users can't.  Make an appointment with the genius bar at a nearby Apple store and have them take a look at it.  If necessary, they should be able to contact iCloud support for you.

  • How to determine the accuracy of the frame rate using a Basler sca640-70gm?

    To whom it may concern
    I am guessing that the time between each frame varies from a nominal set frame rate.
    How do I set that nominal frame rate?
    How do I determine what the actual (frame by frame) frame rate or time between frames was in post pressing of the "video" image. 
    Thank you,
    Todd
    Solved!
    Go to Solution.

    It is almost impossible to measure the frame rate accurately by measuring the time between consecutive frames.  The latency of sending the images over the ethernet means they won't arrive at the computer with the same exact spacing they were taken at.  Also, measuring the length of one short interval in LabVIEW is also very difficult.  Windows latencies and other issues could make your measurement be off by quite a bit.
    The only way I can see to verify the frame rate is to use a digital input into a counter and wire the shutter signal directly from the camera into the digital input.  You could program the counter to measure between the rising edges of the shutter signal, and you would find out the frame rate is indeed very accurate and repeatable.
    The only other way I know to accurately measure the frame rate in LabVIEW is to measure the time over a large number of frames (thousands) and divide the number of frames by the total time.  Any minor errors in measuring the timing of a single frame go away with the large number of frames.
    Bruce
    Bruce Ammons
    Ammons Engineering

  • Is there a way to change the frame rate on an audio clip in the source monitor?

    Premiere CC6.  I am trying to sync audio and video by using "Merge Clips" but the audio seems to be counted in a 29.97 rate while the video is 23.98.  The sound person on set swears the audio TC should match the smart slate and that the frame rate is 23.98.  Any help or insights would be greatly appreciated.

    I think I may have solved it, actually.  I find that if I switch the timecode to NDF in the source viewer, it seems to work.  I have tried it on three clips and they have sync'd without problems.  Hopefully this will continue to be the case.

  • Is there a way for the tracker to do key frames at the frame rate of the comp setting?

    I was doing some tracking in a 24fps project (yes my comp settings are correct) and I was really annoyed to see that the track looked to be generating key frames at 29.98fps. Of course this means crazy jittering.
    Is there a way I can change the rate that tracker generates key frames?
    Please help. I use CS3.
    Thank you in advance for your help.

    Mylenium said this:
    > Is the footage interpreted correctly? There has been some
    > discussion for CS4 about incorrect frame rate treatments in
    > pretty much all of Adobe's video-centric tools, but I'm not
    > aware of any particular issues with the tracker. Still, maybe
    > it is one of those bugs.
    redmike said this:
    > I was doing some tracking in a 24fps project (yes my comp settings
    > are correct) and I was really annoyed to see that the track looked > to be generating key frames at 29.98fps. Of course this means crazy
    > jittering.
    (I assume that you mean 29.97, not 29.98.)
    In all versions of After Effects, the motion-tracking keyframes are set at the frame rate of the footage item on which the layer is based, not at the composition's frame rate.
    Have you checked to see that your footage item is interpreted to be 24fps?
    Also, are you sure that this "jittering" that you're seeing is because of the rate of the motion-tracking keyframes?

  • Can i lock the frame rate on  4S?

    can I lock the frame rate on an iphone 4s to 30fps?

    There is not currently a way to lock the frame rate on an iOS device without jailbreaking it.

  • Would you like to change the frame rate of the project to 30 to match to m

    I just now moved some film clips from the Event Library to the Project Library and a white message window appeared saying: *MISMATCHED FRAME RATES. The frame rate of t his cli is 30 and the frame rate of the project is 25. Would you like to change the frame rate of the project to 30 to match the clip? And two radio buttons: Don't Change and Change.
    First of all, the other day I set my Sanyo VPC-HD2000A to shoot film at 1280 x 72 at 30 fps SHQ. Now I just checked and it is set at the topmost red zone960 x 540 at 30fps. The only thing I can think of to explain this is that I selected it but did not "set" it.
    Thus now I have a message asking what I noted above. Should I click CHANGE?
    WHY IS THE FRAME RATE OF THE PROJECT SET AT 25? How did I do that? What did I do that caused me to have a project that is set at 25 fps?????
    Time for another snack. 8-(
    -L
    A side issue is to find out why I set my Sanyo VPC-HD2000A at one rate (above) but now see that all the footage was shot at a different rate. Very very frustrating.

    AppleMan,
    It all began inside the settings of my Sanyo VPC-HD2000A when somehow the selection got switched from 1280 x 720 to that other setting with so-called 25fps. Also, I don't know whether the mishap occurred before or after I took my new footage.
    I edited the clips last night and now they are on my blog and channel and they seem ok but slightly fuzzy.
    I used a Sanyo VPC-HD2000A .7x wide angle lens with macro and I notice that when I zoomed in to the little sun conure, the picture blurred. I think that might be something that happens when one zooms the focus.
    Also, I was born and raised to a teenager in Hawaii, but now Southern California has me in its grip.
    -L

Maybe you are looking for