Is it possible to Xmodem an image onto a Nexus 5010

My system image is corrupt. I was wondering if anyone is aware of a way to xmodem an image onto a 5010 switch.

I don't remember seeing a USB-Port on the devices, so I'm not sure Leo's advice will help you.
Instead use the "set" command in rommon mode to configure IP address and gateway. Then you can boot from a remote tftp-server.
Regards

Similar Messages

What's the best way to put a programmatically sizeable transparent image onto a VI front panel

The problem is twofold: 1) how can programmatically read a transparent image (i.e. image with transparent background) and 2) how can I programmatically position and size that image onto a VI front panel. The best luck I had with item 2 was with a boolean custom control with an imported image. However, this control does not have a programmatic method for importing an image, so the image had to be manually cut&pasted into the custom control.

Hi,
If the image is static, it's possible. You can drop a metafile on the front
panel, and use Panel>Decorations> to get a reference to the image. Resize it
as desired.
Changing the image (e.g. from file) is not possible this way, but you can
put multiple images on the screen and change the visibility...
If you want to make a picture viewer, I'd consider an activex control (this
way you can load several picture formats without any programming).
Regards,
Wiebe.
"Jim Campbell" wrote in message
news:506500000008000000AF4E0000-1023576873000@exchange.ni.com...
> The problem is twofold: 1) how can programmatically read a transparent
> image (i.e. image with transparent background) and 2) how can I
> programmatically position and size that ima
ge onto a VI front panel.
> The best luck I had with item 2 was with a boolean custom control with
> an imported image. However, this control does not have a programmatic
> method for importing an image, so the image had to be manually
> cut&pasted into the custom control.

How to add external images onto a control and still be able to resize

Hello,
I'm a LabVIEW newbie. I'm trying to customize the appearance of my VIs, and one of the things I like to do is to import external image and paste it onto the faceplate of the gauge indicator. I've followed the instruction in the Labview application note using the control editor and was able to paste the picture into indicator. But when I use it in the front panel and resize the gauge indicator, the image (added as a decoration) doesn't resize together with the indicator. My questions are:
1. How to add external images onto a control/indicator and still be able to resize the image automatically when I resize the control/indicator?
2. How to "add" a new part to an existing control/indicator? It looks like I can only customize/modify the existing parts of the control/indicator in the control editor.
Any help is appreciated. Thanks.

1/ Do not use the image as an added decoration. Instead replace part of the control with the image. Tis is illustrated in the attached vi : the arrow was pasted as a decoration, and also used to replace the slide cursor. Changing the control size do not affect the decoration, but changes the cursor.
2/ What do you mean by adding new parts to a control. We have just seen that it was possible to modify a control. Now, if you want to include additionnal functionnality, that's another story. You can replace parts of the control, and this can give interesting results. You can edit a slide control, and replace the numeric indicator by another control, including a numeric indicator, that you can replace with etc...
But there, it still the same info displayed under different forms. If you want to have several independant functions on the same control, such as a string display and a boolean and a numeric indicator, then that's a job for a cluster...
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Slide with Arrow.vi ‏13 KB

How to project an image onto a background image?

Hi,
I am looking for help with projecting an image over another image.
I am looking for a similar effect to the image above where it looks like the image of the player as (physically) been projected onto the tunnel.
Looking closely at the detail of the image you can see that the projection adjusts to the contours of the tunnel i.e. over the framing. This is what I specifically need some help with. I know how to overlay an image onto another using different layers but it doesn't really give a three-dimensional perspective and looks rather flat.
Any help or advice would be greatly appreciated. Thanks
Ravi.

Hi Ravi -
Could you post what you have done so far, and include your expanded layers panel? The source images would also be helpful, if possible!
One thing you could try is creating a Displacement Map of your background tunnel image and then wrapping your overlay image to it. The video tutorial below shows you how to do this:
Beside this, you might just have to spend time tweaking your image to create a realistic overlay. This includes adjusting lighting, but also distorting your overlay image. Have you tried using Edit > Transform > Perspective to align your image to the tunnel? The other Transform tools like Distort and Warp might also come in handy.
I'm looking forward to helping you with this effect!
Cheers,
Kendall

Downloading raw FZ40 images onto Elements 7

Is it possible to capture raw images from a Panasonic FZ40 onto Elements 7?

You need to upgrade or convert to DNG
Windows download click here DNG Converter 7.1
Mac download click here DNG Converter 7.1
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

Is it possible to get the image from the i pad when mirroring via Apple TV to fill the screen instead of appearing as a screen within a screen?

When mirroring, is it possible to get the image from the ipad to fill the screen on the TV instead of appearing as a screen within a screen?

Welcome to the Apple Community.
No, the iPad has an aspect ratio of 4:3, a TV has an aspect ratio of 16:9, to fit one into the other is impossible without distorting the picture. If your TV has a zoom feature, you may be able to use this to fill the screen a little more to your liking, but this will result in cropping top and bottom.

I was going to install Rosetta Stone Spanish onto my Macbook but am concerned about it taking up space on my 2GB hard-drive. I have an external WD hard-drive; is it possible to put the application onto the external hard-drive to save space on my mac?

I was going to install Rosetta Stone Spanish onto my Macbook 10.6.7 but am concerned about it taking up space on my 2GB hard-drive. I have an external WD hard-drive, and I was wondering if it is possible to put the application onto the external hard-drive to save space on my Mac?

I think you're confused about how much hard drive space you have. You probably have 2 GB of RAM... there hasn't been a Mac shipped with only a 2 GB hard drive in a while. At the bottom of any Finder window, how much space is available?
If you're actually running low on space, you should move documents to the external drive, since many applications want to be on the system drive.

Is it possible to make an image of a MBP, and run it as a virtual machine?

Is it possible to create an image of an exitsting MBP, transfer the image to another system or server, and run that image as a virtual machine? If so, how?
Thank you

Mac OS X will not run in a virtual machine, except as 10.6 Server:
https://discussions.apple.com/docs/DOC-6841

When importing images into LR5 on my laptop, the photos all have a wide yellow streak through them. This only happens on the laptop; I can import the images onto my desktop LR and there isn't the streak of colour. Can someone help?

When importing images into LR5 on my laptop, the photos all have a wide yellow streak through them. This only happens on the laptop; I can import the images onto my desktop LR and there isn't the streak of colour. Can someone help?
This is happening even with photos that were taken on another camera, not just mine. My daughter told me that the laptop recently fell. The yellow streak is not anywhere else on the laptop, just on the photos in LR.

I have had this problem on my desktop. I have been attempting to reproduce it where it can be debugged. Here are some observations/facts in my environment--no conclusions:
1. I do not import from camera or memory stick directly into LR. I copy all images (using Explorer) from camera to two different locations (backup location first); and then my working area. In both cases, after files are copied I mark them Read-only.
2. Poor observation, but in any event: the issue has only occurred when I do a large number of images. Its a poor observation as I have no exact number. I suspect when I do less than 50 always works well every time. However, I have also done some very large imports without issue.
3. Error only occurs with my RAW images--for me that's NEF. I have multiple cameras--those that only capture jpg images have never had an issue in LR.
4. Even if the file is marked Read Only issues can still occur. I then remove the image from the disk using LR -- and then manually (Explorer) copy in my backup image -- re import again and all is well. I think one time I exited LR and replaced the bad file with a backup and restarted LR and all was well again.
5. When it occurs I have performed a HASH value on the broken file and on the backed up file to determine if the file contents has changed--and each time the file contents has changed.
6. I have had this occur immediately after import, but most often it occurs like this... import large number of images; Make changes in Development Module on random image, export jpg of changes--exit LR. Open up LR and file is corrupted.
7. I have had this issue on multiple USB drives ( okay just 2 different drives have been tested ).
What next--fire up Process Monitor and monitor the system (specifically LR) to see if it reports any file open for write access when this occurs. So, far I have not had process monitor actually running when it occurs--one of these days.

Can't drag image onto stage in new layer, from the library?

For a text book assignment we have to make a new layer and then drag a image from the library panel onto the stage but it won't let me? The new layer doesn't look the same as the rest in the timeline panel too.

Hi,
Thank you for your advice, but sadly it isn't locked. I can drag an image onto a layer already there just not a new layer for some reason. I'm behind in class because of this issue but I'm at a loss. I know how to take a screen shot but how do I add it to here, I pasted it in microsoft word but it wouldn't allow me to upload it as a image...

Is it possible to submit an image file with PDF form?

Hello,
I know that Acrobat does not offer a field for image file submission.
whether there are workarounds to solve this problem?
I have found suggestions regarding place an image to button icon:
event.target.buttonImportIcon();
but I can't understand is it possible to submit this image to server (Reader supports PDF only).
Any advices?
Yury

Hi Yury,
Yes, that's correct you can create a button and add a script to it that would prompt the user to select an image file when that button is clicked. Then that image can be displayed using the same button (buttons can show either an image or text).
The script in question is:
event.target.buttonImportIcon();
You need to add it as an Run a JavaScript-action to your button, triggered by the MouseUp event, and of course set the button's layout.
Please refer to this link : https://acrobatusers.com/tutorials/how-to-create-a-button-form-field-to-insert-a-pdf-file
On submitting the image it gets embedded with the PDF.
If the users are using Acrobat they will be able to view the image in the PDF, however if they are using only Reader, you will have to create the form using LiveCycle & then save it in a Reader Extendable Format.
Regards,
Aadesh

How to superimpose still images onto video?

Hi there,
I'm an absolute beginner with iMovie (and video editing in general), so please forgive my ignorance!
OK, my question is this: Is it possible to superimpose still images on top of video in iMovie, and if so how? I'm using iMovie because it has a reputation for ease of use, and yet I can't figure out how to do this... Basically, all I want to do is take a single piece of video about 5 minutes long and periodically fade in and fade out some still images on top of the action. Am I being too ambitious here?! Should I just give up on the idea...?!
Any help or advice would be very gratefully received!
Thanks.

Just in case anyone else is interested in doing something similar - I found two (commercial) solutions to this problem:
Gee Three software's 'Slick 4 - Hollywood edition' plug-ins package includes 'Picture-in-Picture' - $50 (also includes three other great effects): http://www.geethree.com/slick/V_04.html
cf/x's 'Picture in Clip (Static)' does exactly the same, but only costs a bargain $1.50 - available here: http://www.imovieplugins.com/plugs/pictinclipstat.html
Cheers!

Drag and Drop Image onto Native Application

I am interested in dragging and dropping an image
from a java app to a native app (such as MS-WORD,
etc), i have been able to DnD text but have been
unsuccessful with images. any tips, resources?
Thanks

thanks, i already saw that.
is there a way I could drop an Image onto a native app such that when it drops, another component / object such as a frame loads?
thanks.

How do I get my IPad 2 images onto a regular TV? I have the plug from the apple store, and the HDMI cable. The TV recognizes a devise, but no image on TV!

How do I get my IPad 2 images onto a regular TV? I've got the converter plug for HDMI from the apple store and an HDMI cord, etc. I've plugged everything in and the TV recognizes a devise, but no images on TV...help!

Hey Anndog,
Thanks for the question. I understand you wish to connect your iPad 2 to an HDMI TV. The following article provides some great information on how to do this, along with troubleshooting information if you are experiencing issues:
iOS: About Apple Digital AV Adapters
http://support.apple.com/kb/HT4108
Thanks,
Matt M.

How do you print one large image onto multiple smaller sheets?

For example, I want to print one 17x22-inch image onto 2, 8.5x11-inch sheets.

I think you have your calculations wrong. It would take four sheets of paper to have the same size image because you have to double in both directions. I think printing an image on multiple pages is a function of the printer. If your printer has that capability then the options will be in the printer driver. Otherwise, I guess you could try to create virtual copies and crop each one individually and print them and hope they match up.
My printer does not have that capability, so I'm not familiar with how it would work. But it might be necessary to print outside of Lightroom in order to me that feature function properly. If it sounds like I don't know what I'm talking about, that's probably because I don't, really.

Is it possible to Xmodem an image onto a Nexus 5010

Similar Messages

Maybe you are looking for