Is it possible use a standalone WAS 6.40 (ABAP) between EP 6.0 and R3 4.6C?

Hi SDN's,
Is it possible to use a standalone WAS 6.40 (ABAP component) for integrating EP 6.0 with R3 4.6C and older? If not why isn't it possible? I know ITS 6.20 works for this. Our client wants to integrate EP 6.0 with 4.6C for MSS/ESS fucntionality.
Thanks in advance.
Dries

Hi SDN's,
I am going to rephrase:
WEBAS 6.40 (ABAP) has an integrated ITS. As I understood a WEBAS 6.40 standalone can be installed. Can't this be used instead of the ITS 6.20 standalone version or will this not work between SAP EP 6.0 and 4.6C for MSS/ESS?
Thanks
Dries

Similar Messages

In latest version of MF there`s missing button, which was in previous version: between buttons back/forward and the typing bar there used to be little flash, which showed few last pages I have just browsed. How can I restore it?

In latest version of MF there`s missing button, which was in previous version: between buttons back/forward and the typing bar there used to be little flash, which showed few last pages I have just browsed. How can I restore it?

If you mean the drop marker then you can still get the History of the Back and Forward buttons if any by either Left-Click and hold for a second or by Right-Clicking them.
If you still want the drop mark there also then there is this Extension at https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/
Also the abbreviation for Firefox is '''Fx'''

Switched to Verizon and bought my phone and plan in Feb, submitted all paperwork to receive a discount because company I work for uses Verizon. Was told they lost the paperwork in Jun and I could verify my employment by using my employee e-mail. Did thi

Switched to Verizon and bought my phone and plan in Feb, submitted all paperwork to receive a discount because company I work for uses Verizon. Was told they lost the paperwork in Jun and I could verify my employment by using my employee e-mail. Did this and here it is towards the end of Sep and I still don't have my discount!! Very frustrated and think maybe I should have stayed with AT&T.

I'm so sorry about this, Vboozer! You should definitely have your discount! When you submitted the email, did you get any kind of a confirmation? Did you get an email at your work email address from Verizon Wireless? You can check and register for your discount here: www.vzw.com/discounts
Thanks,
ChristinaB_VZW
Follow us on Twitter @VZWSupport

Using functional global variables to transfer data between touch screen device and other targets

Hi,
We are currently developing a control system that will operate on a cRIO with a touch screen interface. During development we have been using functional global variables (FGVs) to handle most of the settings/data etc, however we have just realised that we may have an issue updating the data on the touch screen, and vice versa.
Previously we have implemented similar programs using shared variables, however we were wondering if there is anyway to implement FGVs in a similar manner, whether it'd be a combination of FGVs and shared variables.
Regards,
Mike
Software version: Labview 8.2.1

See this thread on LAVA about sharing FGV's across projects. THis should be extendable to cross paltforms (I believe).
You also may want to concider an upgrade to LV 8.5.1. We have found a number of performance related issues with LV 8.2.1 and RT.
If you decide not to upgrade, just remeber what I wrote (above) when you have reason to question the performance.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

I want to use PCK standalone and do one scenario of mail to file ?

hi all
Is it possible to use PCK standalone and do scenario of mail to file by using PCK mail and file adapters .if yes reply me
thanks

i didn't get you sir ...can please clarify me . i had done the same scenario using XI but in PCK is it the same? because in PCK it requires Default Interface Name and Namespace which must exists in XI and we can't even create our own interface in PCK .so howz it possible without XI.
please reply me
Message was edited by:
Ashwin Kumar Dhakne

Is RDC integration with Lotus notes apps possible using CR XI and lotus 8

Hi,
We have reporting feature implemented in one of lotus notes application using crystal reports 6 (OCX) and as Crystal report is going to be upgraded to CR XI version in my organisation, we need to implement the same using RDC component.
Background (on how it has been implemented using CR 6 ) :-
i) Lotusscript generate few CSV file and pick a .RPT file from profile doc and places it under one folder on local machin (say x).
ii) RPT file is designed to pick data from CSV file using system DSN (data source).
iii) Data source (system DSN) has been configured with folder (x) that contains CSV and RPT file .
iv) Crystal report control object has been embedded in the lotus notes form and lotusscript code gets handle of control object and opens the report (RPT)file .
We have set up all neccesary environment and trying to implement above functionality using RDC component but when we are embedding the crstal report report viewer in a lotus notes form , it throws an error "An error has occured while processing a request on an object".
Please let me know if it possible using RDC or can anyone suggest me some other alternatives .
TIA

Hello,
You should be able to use the RDC in Lotus Notes. There are significant differences between the object model for the old OCX (crystl32.ocx) compared to the Report Designer Component (RDC) and it's components, the craxdrt.dll, crviewer.dll, etc.
I was able to find an older document that shows how to integrate CR9 into Lotus Notes: "[Using the Report Designer Component (RDC) in Lotus Notes|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/50ce64b3-241f-2b10-b792-9685d3815a21]". You can use this as a starting point to compare with your code.
The RDC object model hasn't changed much since CR9, but some of the runtime component references in the document may need to be correct (e.g. craxdrt.dll for v11.x vs craxdrt9.dll for v9.x).
It is worth noting that the RDC has been retired with the release of CR2008. CR XIR2 (v11.5) is the last version of Crystal Reports that uses the RDC. The suggested migration path is to move to the Crystal Reports .NET SDK. This means you'll have no upgrade path with a v11.x application.
Sincerely,
Dan Kelleher

Is it possible using In-Browser Editing in Adobe Muse CC to add or delete images from the online gallery?

Hei,
The online editing works fine, changing text and swapping pictures is no problem.
Adding new content from your own computer works as well
But how is it possible for my client to delete some images from the gallery on the site using the in-browser editing?
Or for that matter add extra images to the gallery on the site?
Is it possible at all?

Almost thought we found the ultimate workaround!
It does accept a transparent png file, even better it does not even have the shadow effects the rest of the images have in the thumbnail container.
So it is practically invisible if it was not for the cursor changing in a pointer hand
So up to this point I was really excited. But when I tried the in-browser editing of this "invisible" thumbnail, it recognised the thumbnail but it would not let the thumbnail be edited.
Weird part though was that I could click the "invisible" thumbnail and edit the enlarged picture, but the thumbnail would still be invisible
What do you think, can you think up a workaround for that?
Thanks for brainstorming with me!
jfuun

I do have wifi connection but no internet, how is this possible? I logged in to the internet at my friends place and when I got home my own internet was not working anymore

I do have wifi connection but no internet, how is this possible? I logged in to the internet at my friends place and when I got home my own internet was not working anymore

This is possible to be connected to WiFi but not internet.
You connect to your modem/router via WiFi and whether it is connected to the internet or configured properly to route the internet to WiFi devices is a different story.
Now if you've already reset your WiFi (try disabling and enabling) and perhaps even restarting your MBP
Then make sure that your modem/router is connected to the internet.
You can try any other device, lights on the modem/router or use Eth cable to test.
Report back your findings.

DDIC objects not existing in standalone WAS

Hi all,
Here is our pb :
We started a bsp developpement on a R3 system with WAS6.20.
We transported our code (only the code concerning bsp application) to a new standalone WAS 6.40. But on this new machine a lot of ddic elements were not available. Especially all BAPI structures (BAPIORDERS, BAPIITEM...).
I don't undestand why these structures are not part of a basic standalone was. Is it a was installation issue ?
Anyway is there a way to pick the ddic elements from was 6.20 to export them to was 6.40 ?
Other solution would be to modify our code and create new data structures and elements but it seems quite a painful job to me !
Thanks
Sylvain V.

That situation sounds fairly normal. R/3 has extra components (APPL is one of them) installed on top of the standalone Netweaver system (basic Netweaver is just ABA, BASIS, and BW). Obviously any data elements or structures that belong to packages (development classes) that are part of R/3 won't be there.
I wouldn't necessarily suggest trying to transport them from an R/3 system. These objects are in SAP's name range and transport scheme. I think you would run into considerable problems trying to export/import them.
You can recreate them by hand as new objects within your customer name range. This is what I used to do quite often. Another option would be to use the BAPI Browser to create local definitions for the structures. I have also used XML and BAPI function module wrappers to avoid having to recreate structures. A final option would be to install your 640 system as a full R/3 (ERP2004) installation and not just a standalone Netweaver system. This will make your system considerably larger however.
Here are some weblogs that I wrote on the subject some time back:
/people/thomas.jung3/blog/2004/06/23/bsp-150-a-developer146s-journal-part-iv-rfcs-and-the-bapi-browser
/people/thomas.jung3/blog/2004/06/24/bsp-150-a-developer146s-journal-part-v-xml-for-rfcs

Is this Possible using ODI / ODQ ?

Hi ALL,
Is the below requirement possible with ODI / ODQ?
(right now I am doing it mannually, and its like a monthly/weekly process)
If we can do the same using ODQ how I need to start and proceed?
My requirement is some thing like this. I have two columns
Address1 (street address)
Address2 (additional Information)
In some cases the address is not in the proper format. So I need to do some data cleansing (data scrubbing) before loading using ODI
Use Address2 if Address1 is PO Box, building name, or any info aside from a street address. Only one address column is needed in the output (Address1)
For example :
INPUT
ADDRESS1--------------------------------------------------ADDRESS2
HIGHWAY # ------------------------------------------------5010944 MARSH RD
PO BOX 40964---------------------------------------------1100 AA CORP PARKWAY
DBA VANTAGE PP---------------------------------------11031 PERRY HIGHWAY
HOME INFUSION THERAPY SERVICES--------11031 PERRY HIGHWAY
7275 BUFFALO ROAD----------------------------------(WAS 6855 BUFFALO ROAD)
7601 N FEDERAL HWY---------------------------------#2506
MCAS ---------------------------------------------------------(MARINE CORPS AIR STATION)
212 BRADDOCK AVENUE------------------------------
212 NINTH STREET----------------------------------------
2138 JONATHON DRIVE---------------------------------
OUTPUT (Note : we don’t need the Address2 column in the output)
ADDRESS1----------------------------------ADDRESS2
10944 MARSH RD------------------------10944 MARSH RD
1100 AA CORP PARKWAY-----------1100 AA CORP PARKWAY
11031 PERRY HIGHWAY-------------11031 PERRY HIGHWAY
11031 PERRY HIGHWAY-------------11031 PERRY HIGHWAY
7275 BUFFALO ROAD------------------(WAS 6855 BUFFALO ROAD)
7601 N FEDERAL HWY----------------#2506
MCAS-----------------------------------------(MARINE CORPS AIR STATION)
212 BRADDOCK AVENUE------------
212 NINTH STREET----------------------
2138 JONATHON DRIVE---------------
I have posted a similar kind of question in DATA Quality (ODQ) forum
Forum Home » Master Data Management (MDM) » Data Quality
ADDRESS CLEANING(US) USING ODQ
Thread: ADDRESS CLEANING(US) USING ODQ
if any body is working on address cleansing using ODQ, Please guide me to start working on it.
IS there any specific documents for ADDRESS CLEANING which gives more information about the process flows such as
Transformer, Customer Data Parser, Sort for Postal Matcher, Postal Matcher, Window Key Generator,Sort for Linking, Relationship Linker, Commonizer, and Data Reconstructor.
Thanks in Advance,
Rathish

Hi Rathish,
I was building the java code but I got other idea to make more simple.
1) load the values into a temp table with one column for each address (means 2 columns per line) plus 2 other columns to control.
Something like:
table temp_data
columns: add_1 , control_1, add_2, control_2
You can do that thru an interface. Let the fields "control" with no value when loaded
2) create a table to storage the values you sent to me (Avenue, street...)
table street_names
columns: street_name, country (to your future use)
3) Create an ODI procedure (or you can customize a KM with the same technique)
3.1) Step 1 at target Tab, technology javaScript
code:
<@String vU=" ";@>
3.2.1) step 2 - Tab Source - technology "your database" and the Logical Schema where the "street_names" table as created
select street_name
from street_names
where country = 'US'
3.2.2) step 3 - Tab Target - tecnology javaScript
<@vU+="or instr(upper(add_1),upper('#street_name'))>0 ";@>
3.3) step 3 - Target Tab - technology "your database" and the Logical Schema where the "temp_data" table as created
<@vU=vU.substring(3);@>
update temp_data
set control_1 = 'Y'
where <@=vU@>
3.4) step 4 step 3 - Target Tab - technology "your database" and the Logical Schema where the "temp_data" table as created
<@vU=vU.replaceAll("add_1","add_2")@>
update temp_data
set control_2 = 'Y'
where <@=vU@>
4) Now you have a table (temp_data) with a flag "Y" where there is a street name and "null" where doesn't exist. Just generate your file by a interface or odiSqlUnload Toll.
Put all together into a package and you will have your process.
I create in this way to minimize the access to the temp_table, just 2 updates.
can be used some alternatives to tunning the hole process if the time doesn't match what you need.
That is a fast solution. Something more elaborated can be done if necessary.
Does it help you?
Cezar Santos

I downloaded CS6 and was told that it was possible to make a hard copy DVD for safety,is this correct and if so how is it done?.

I downloaded CS6 and was told that it was possible to make a hard copy DVD for safety,is this correct and if so how is it done/.

Use a DVD burning program:
https://www.google.com/search?q=vdvd+burning+program&ie=utf-8&oe=utf-8&aq=t&rls=org.mozill a:en-US:official&client=firefo…

Is is possible to use a netgear wireless router to share a cable internet connection between an airport express and a Sony BD player?

Hi,
I have a couple of netgear wireless routers (WGR614, WPN824 v3) as well as a Belkin wireless router (F5D8233-4v3) lying around, and was wondering if it is possible to use any of these to share the internet feed from a cable modem to both an airport express and a Sony Blu-Ray Player? I connected the WPN824 router between the cable modem and the airport express but the airport express will only give an orange light then as if it does not have internet access. Any suggestions would be much appreciated! Many thanks.

What you are basically attempting to do is extend the Belkin router with the AirPort Express Base Station (AX) via a wireless connection between them. This method is known as a Wireless Distribution System (WDS). Unfortunately, WDS is not a standard and router manufacturers implemented, in most part, to only work with their products ... so it will be very unlikely that you can create a WDS between your Belkin and the AX. There have been a few Belkin model that have been updated by third-party firmware that support WDS, but the models you listed are not any of them.

Hey guyys .if some 1 from firefox team can help it wud be great......I was using firefox 3.6.3 on Mac OS 10.5.8 and Today I installed firefox 3.0(besides application folder) but not in same application folder like firefox 3.6.3 ...so now i had 2 firefox v

hey guyys .if some 1 from firefox team can help it wud be great......I was using firefox 3.6.3 on Mac OS 10.5.8 and Today I installed firefox 3.0(besides application folder) but not in same application folder like firefox 3.6.3 ...so now i had 2 firefox version 3.6.3 and 3.0....I had 3.6.3 already open ..i closed it to... open 3.0 ....when i opened 3.0 it asked me to import settings i said no....it opened well.....then i close 3.0 and tried to open 3.6.3 version ...now it was a problem everything got lost sessions, bookmarks, add ons, etc....it went back to default ....when i had 2 profiles in 3.6.3.....can any pls help me on dis 1...is there a way to restore my sessions, bookmarks and add ons ??? I have uninstalled 3.0 version now....??? pls pls pls ....help
== This happened ==
Just once or twice
== today

It turns out that the problem had to do with network accounts, even though it was not clear at first. Redirecting the program to the local machine's cache with a network home redirector script fixed the issue. Thanks anyway.

I used to be able to use a dropdown calendar that was embedded in an application to backdate data and now I can't This has just changed within the last 3 weeks. What can I do to get it to work again? I think this happened when there was a Firefox update.

The application was created by someone in my school district, and they built it for use in Internet Explorer. When you click on the pop out calendar, you should be able to choose for what date you want to fill in data. Last year it didn't work, this school year it did up until around the week of Oct. 17th. It hasn't been able to work since. I am wondering what has changed- the district says nothing has changed on their end.

I tried running Firefox in Safemode and still have the problem. I cannot view my emails.

HT1311 i have american account but i just now have 0.61$ and i have another gift card from uk.i want to use it but itunes said i have to change my country and its not possible before i spend all my money.my question is how i can spend a 0.61$ ?

i have american account but i just now have 0.61$ and i have another gift card from uk.i want to use it but itunes said i have to change my country and its not possible before i spend all my money.my question is how i can spend a 0.61$ ?

If you are now in the UK then you can try contacting iTunes support and see if they can remove the balance from your account : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Is it possible use a standalone WAS 6.40 (ABAP) between EP 6.0 and R3 4.6C?

Similar Messages

Maybe you are looking for