Is it possible viruses hit my windows on virtual pc?

Hi,
Im using windows2000 with my virtual pc 7, and id like to use msn messenger on it. The thing that bothers my mind is viruses. Is it possible for my windows to hit by viruses? And I dont like to use any anti-virus on it, thats one of several reasons why i use mac rather than pc.
thanks...

Yes, Windows on VPC is just as susceptible to viruses and other stuff as Windows on a real PC.
iFelix

Similar Messages

  • Got a virus on the Windows side of my partitioned drive on my mac book pro. I'd like to reformat that side and use all apple now. Is that possible?

    I have a mac book pro laptop that when I purchased it, I partitioned one side with bootcamp and the other with Apple. Since then, I seem to have acquired a virus on the Windows side and I'd like to simply reformat that side. My preference is to NOT use Windows again since I no longer do. Is it possible to reformat that side of the drive and make it apple again?
    What other solutions do I have?
    Thanks in advance!
    JBeechcraft

    Open Boot Camp Assistant. Use it to remove the Windows partition and rejoin it to your OS X volume. Do not attemp to reformat or use Disk Utility for this or you can corrupt the drive.

  • ITunes 10.6.3 Mac running 10.7.3 not responding I have deleted iTunes and reinstall iTunes and it keeps happening I also scanned the computer for any trojans and any other possible viruses but the pc is running perfect waft do I do ? Please help me ?

    I need help iTunes 10.6.3 Mac running 10.7.3 not responding I have deleted iTunes and reinstall iTunes and it keeps happening I also scanned the computer for any trojans and any other possible viruses but the pc is running perfect waft do I do ? Please help me ?

    Hey thanks for replying.
    Here's what I did:
    First I tried the Winsock reset in the Command prompt. Nothing changed.
    Next, I tried the instructions on http://http://support.apple.com/kb/TS4123. The only other program that came up on the 'Winsock Providers' tab on the program was 2 Windows Live applications, which I can do without. So I deleted all Windows Live Applications.
    I did the Winsock reset in the Command Prompt again and rebooted my comp.
    Unfortunately, nothing has changed. iTunes keeps freezing at various stages of the sync, then shows the candy cane-striped bar with either the words 'Finishing sync' or 'Cancelling sync', before showing the Apple logo.
    Sometimes, iTunes gets to the syncing stage - "Copying # of ####" - where it will trudge through the first, second and third tracks before flashing "Copying 4 of ####" for a split second and I catch "Cancelling sync" briefly before the Apple logo appears.
    Again, I've repeated the steps I mentioned in my previous post. Does ANYONE know when the new version of iTunes is set to be released?! This one is driving me INSANE, to say the least!!

  • Is it possible to print from Windows 8.1 to a printer connected to the USB port on an Airport Express?

    Is it possible to print from Windows 8.1 to a printer connected to the USB port on an Airport Express?
    a) HP printer with USB port only (no ethernet port) connected to Airport Express
    b) No issue printing from Macs
    Tests
    1) Installed Bonjour 2 - does not find printer (now uninstalled)
    2) Bonjour 3 is listed in programs but no way to access
    3) Using TCPIP address (and no Bonjour) gives 'Unsupported Personality' error when printing test page
    Regards
    Richard
    p.s. why are all Windows 8.1 questios n the forum 'Locked' with no reply?

    This is possible, but not with Bonjour or any other fixes.  It is just a printer set up based on the Port name of the Airport, 10.0.1.1.
    I found the answer on YouTube, Title: Windows Printing For Apple AirPort Extreme without Bonjour Wireless wifi.

  • Is it possible to create a Windows 7 Partition via Bootcamp while having an internal RAID 0 Setup ?

    Is it possible to create a Windows 7 Partition via Bootcamp while having an internal RAID 0 Setup ?

    Yes, just not on the RAID. Boot Camp Assistant will only partition a single drive containing OS X. You cannot partition a RAID array.

  • HT5628 Is it possible to install MS-Windows on MacBook Pro as the only OS

    Is it possible to install MS-Windows on MacBook Pro as the only OS, using all the space of the SSD, by de-isntalling thus completely the Mac OS?

    Yes.
    but
    You will have to erase the drive completely and install Windows, you can't achieve it just by deleting OSX
    I do not recommend that you do it.

  • Is it possible to embed a Windows QT player on CD?

    Is it possible to embed a Windows QT player on CD so the application doesn't have to be loaded on the host machine, but accessed from the CD. I have QTVR movies that must play on XP machines, but receipients are not permitted to permanently load "unapproved" software. I recall long ago that a Mac QT player was standalone and could be included in this manner but am unfamiliar with Windows requirements. Can anyone help please?
    G5 Dual 1.8   Mac OS X (10.4.3)  

    Sorry but no. Just as with Windows Media Player, QuickTime has files that must be installed as part of the operating system. The same would apply to a Mac, by the way.

  • Possible Virus On Bootcamp, how to remove?

    Hi, I think I may have gotten a virus on my windows partition of my macbook pro. I windows XP professional with service pack 3 installed. Last weekend I was booted into windows when it suffered a "fatal error." The computer restarted and windows XP was fine. I did, however, get this email from my university network manager concerning my computer:
    The computer in question appears to be infected with
    a Trojan or worm that reports home to an IRC server.
    Several examples include sdbot, spybot, gaobot, polybot,
    and some variants of OptixPro. We notice these because
    the computer is trying to connect to a known IRC bot
    controller.
    We often are unable to tell exactly which version of
    which IRC bot an infected computer has, but the
    detection method is rarely wrong. There are hundreds if
    not thousands of known variants of each of the above
    viruses, with new ones being released daily. Updated
    AntiVirus software may or may not detect this threat.
    Odds are good that the attacker obtained the
    password database for this computer, containing all
    of the passwords for all accounts on the computer.
    It is IMPERATIVE that all passwords for all accounts
    on this computer be changed before this computer
    is placed back onto the network.
    Computers infected with an IRC bot should have their
    hard disk formatted and have the Operating System
    reinstalled and patched before coming back onto the
    network. All passwords on the rebuild system should
    be different than they were on the infected system.
    IRC bots not only often come bundled with
    other malicious software, but once they connect to
    the IRC controller, they often download and install
    even more malicious software, without the knowledge
    and/or consent of the computer user. Therefore,
    even if AntiVirus software detects and removes the
    IRC bot, typically more malicious software is left
    behind, still running.
    IRC bots are updated frequently. Even up-to-date
    AntiVirus software often doesn't detect the latest
    IRC bots. Once the AntiVirus companies start
    detecting a particular IRC bot, the bot is typically
    instructed to update itself to a variant that is
    not detected by AntiVirus.
    Because of the above activities, scanning for viruses
    with an AntiVirus product is typically not an effective
    remedy for an IRC bot infection.
    I have symantec antivirus for mac, is there any way I can use it to scan the bootcamp partition? I think I know where the infected file is, but symantec says it's clean. I also have Symantec for Windows.
    It would be a HUGE inconvenience to reinstall windows XP because my disc is at home and I will not be home for another 2 and a half months. Can you give me any tips on how to remove this virus without reinstalling windows XP?
    Thanks,
    Sam

    If you delete it you are only getting rid of half the problem, and likely will be unable to do this.
    Start up in Safe mode.. (If you're having trouble doing this press start and search for MSCONFIG go to boot.ini and start in safe mode).
    This will only run basic stuff for windows and should potentially stop the Winlog running.
    However as I said winlog will probably re-appear because the trojan will likely just retrieve it back from the internet.
    I say the best solution is...
    Restart your mac into OS X, download Avast free edition and Spybot S&D or similar, and ZoneAlarm Firewall.
    Put them on your bootcamp drive. restart into windows in safe mode. Install those and restart back into safe mode if needed.
    Set avast to run a boot time scan (Scans before you load into Windows. Run SpyBot S&D. And set Zonealarm to have atleast some sort of protection running all the time.

  • Possible to hit enter on table cell & retrieve data without selecting line?

    Hi All,
    We're using ECC6.  I  I have a situation where the user wants to be able to hit a cell in a table which will then fire a report and pass the contents of that cell to the report. 
    So far I have been only able to get this working when the row is highlighted, I can easily pick up the values from the lead selection.  But the user does not want to have to highlight a row every time to run the report.  The user just wants to hit return a cell and for the report to be updated with the value in that cell.
    So, I'm just wondering if it is possible to hit enter in any table cell and retrive the data without highlighting the row?
    Many thanks in advance,
    Liz.

    Hi,
    You want complete row data or perticular cell data??
    Basic q's, without selecting a row how can we get data? without selecting means you get complete data on table,
    In that case which data you have to pass to report?
    Or if you dont want to select data means, create one more field of type button. so in thins button action get that row data
    and call report from here itself.
    Cheers,
    Kris.

  • Is it possible to call a windows batch file from PL/SQL

    Hi gurus,
    Would require your help.Is it possible to call a windows batch file from PL/SQL??If yes can you give an example for the same or any workaround for the same.
    Regards
    Vijay

    Hi!
    Youn need some extproc related entries in you listener.ora and tnsnames.ora file.
    *1. In the listener.ora:*
    Defining the listener process is done in two parts.
    The information contained in each listener differs!!!
    The first part is as follows:
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = IPC)(KEY = extproc))  <---  *ADD THIS LINE
          (ADDRESS = (PROTOCOL = TCP)(HOST = yourhostname)(PORT = 1521))
      )The seoncd part is as follows:
    SID_LIST_LISTENER =
      (SID_LIST = 
        (SID_DESC =
          (GLOBAL_DBNAME = YOUR_GLOBAL_DBNAME)
          (ORACLE_HOME = c:\oracle\product\10.2.0)  <-- THIS IS YOUR ORACLE_HOME
          (SID_NAME = YOUR_SID)                            <-- SID
        (SID_DESC =                                              <--- ADD THIS LINE
          (SID_NAME = PLSExtProc)                          <--- ADD THIS LINE
          (ORACLE_HOME = c:\oracle\product\10.2.0) <--- ADD THIS LINE AND EDIT TO YOUR ORACLE_HOME
          (PROGRAM = extproc)                                <--- ADD THIS LINE
          (ENV = "EXTPROC_DLLS=ANY")                  <--- ADD THIS LINE
        )                                                                <--- ADD THIS LINE
      )*2. In the tnsnames.ora you need to add the following entry:*
    *(The KEY value entered must be match to the KEY value entered int the listener.ora file!)*
    EXTPROC_CONNECTION_DATA =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = IPC)(KEY = extproc))
        (CONNECT_DATA =
          (SID = PLSExtProc)
          (PRESENTATION = RO)
      )Finally you need to restart your listiner. After restarting there will be a service called "PLSExtProc" in your listener.
    This are only examples for extproc configuration, your tnsnames.ora and listener.ora can be differs.
    FIRST MAKE MAKE A BACKUP OF YOUR ORIGINAL tnsnames.ora AND listener.ora FILES
    For more information please check metalink note 68061.1 "EXTPROC: Creating External Procedures on Windows NT"
    Bestr Regards
    Norbert

  • Is it possible to call a windows batch file from PL/SQL block ??

    Hi gurus,
    Would require your help.Is it possible to call a windows batch file from PL/SQL block ??If yes can you give an example for the same or any workaround for the same.
    Regards
    Vijay

    You didn't specify a database version, but if you are 10g or higher, it's quite straightforward using an external job type in DBMS_SCHEDULER. Funnily enough i'm looking at something similar myself at the moment.
    Useful guide to some of the issues here Guide to External Jobs on 10g with dbms_scheduler e.g. scripts,batch files

  • Is it possible to join a Windows server domain?

    Hi, We have a mixtures of Windows and Mac clients at school. We have recently had installed a Windows Server 2003. The windows all work well - but other than as a file server can I expect more from the macs? Is it possible to join the windows domain - and log in as different users so that different network drives are mounted at log in? Thanks in advance!

    Hi, We have a mixtures of Windows and Mac clients at
    school. We have recently had installed a Windows
    Server 2003. The windows all work well - but other
    than as a file server can I expect more from the
    macs? Is it possible to join the windows domain - and
    log in as different users so that different network
    drives are mounted at log in? Thanks in advance!
    Yes. The server does not have to be running Services for Macintosh.
    If the server is running Active Directory, you'll have to work with the windows admin people to create the AD account.
    Otherwise, you'll just hae access to the shares.
    On the Mac, I think the AD options are under Directory Services.
    To map drives at login, the easiest way is to write an Applescript, save it as an application, and add it as a login item.
    I can't recall the exacy syntax, but for each drive, the script should look something like this:
    Tell Application "finder"
    try
    mount "smb:\\windows.server.ip.address\sharename"
    end try
    You will get a user id/pw/domain prompt for each share.
    For e-mail, assuming they use Exchange, you'll need exchange server 2000 SP 2 or higher with OWA, IMAP, and LDAP active on the mail server to be able to access mail through Entourage or Apple mail.
    Otherwise, you'll be limited to Outlook Web Access.
    Printing: Standard IP,LPR, or appletalk printer setup.

  • Is it possible to deploy a Windows LV application to the MAC?

    Does anyone know if it's possible to deploy a Windows L.V. application to the MAC?  An option in application builder?  A cross-compiler?  Or... am I thinking too much.  Does the L.V. application simply resolve it's library calls differently while on the MAC?
    Solved!
    Go to Solution.

    http://www.ni.com/mac/labview.htm
    Luis A. Mata C.
    Ing. Electrónico
    Anaco - Venezuela

  • Possible to make QT window float on top of all others?

    I want my QuickTime movie window to float on top of all the others, the way some do (like the Microsoft Office Notifications window does). Is it possible? Can a window be set to be automatically on top when another window overlaps?
    Mike

    Thanks - this is a really neat trick! One last question: is there a way to control the size of the QT window within the note? It seems smaller than when I open it by itself.
    Mike

  • Is it possible to open multiple windows on mavericks . if so how.

    is it possible to open multiple windows in mavericks if so how

    First, go to Finder > Preferences and make sure the checkbox is deselected for "open folders in tabs instead of new windows".
    Any folder can be opened in a new window by holding down either Command Key while clicking the folder. But sooner or later you will forget to hold down that key, and then clicking on a folder will open it in a tab (which will automatically resize the window and may cause much aggravation).
    If you're like me and don't like tabs very much, there is a way to make folders always open in windows with a simple click (I'm using Mavericks 10.9.5).  Go to a root folder (for example, the Documents Folder), open it, and select View > Hide Toolbar, then all folders within that root folder will open in a new window.
    The Hide Toolbar trick will also work with any folder present on the Desktop. It will make all folders inside that folder open in new windows.
    Hope this helps.

Maybe you are looking for