Is it possible - when a pop up occurs while in a site - to have the pop up always open in a certian predetermined area on the page?

Is it possible - when a pop occurs while in any site - to have the pop up window always open in a certain predetermined area on the web page?

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Similar Messages

When I try to log in to a site i trust, the page just stays blank after i enter password and hit enter?

I am on a website and can move around but when I try to log into my account I put the password in and hit enter. The page then just stays white and doesn't load. Could this be an issue with the settings I have in Mozilla? IE brower works fine

Try loging in manually instead of using the saved details. Review the saved details do they seem correct ?
* see [[username and password not remembered]]
* and [[how do i make firefox remember my usernames and passwords?]]

When a pop-up is opened in a new tab, do NOT switch to it immediately

Hi.
I have changed value of browser.link.open_newwindow.restriction from 2 to 0. Now pop-ups open in a new tab instead of new window, which is cool.
But still firefox immediately switches to the pop-up that gets opened in a new tab.
I want to have firefox in a way that, when a pop-up gets opened in a new tab, do NOT switch to it immediately.
Note: The option "When I open a link in a new tab, switch to it immediately" in menu Options->Tabs, is already unchecked.

Try to set the browser.tabs.loadDivertedInBackground pref to true on the about:config page.
*http://kb.mozillazine.org/about:config

I keep getting "error occurred while attempting to import file *******. The disc your are attempting to use is full." I have an external hard drive that I moved files over to, but apparently they're also still on my hard drive? HELP!

I keep getting "error occurred while attempting to import file *******. The disc your are attempting to use is full." I have an external hard drive that I moved files over to, but apparently they're also still on my hard drive? HELP!

So you have backed up the content of the computer's hard drive, too?
That usually is a great idea since it is possible to lose use of the system
if parts of it have accidentally been removed or get over-written, or the
main system files get corrupted, when the hard disk drive gets too full.
If you have not trashed the originals of your created content, that remain
after you made copies on an external hard drive or other device, then
that is what you'd have to do to reclaim the capacity still in use by them.
What are specifications of the hard disk drive? The unused capacity
verses the used, in GB? If the hard drive has less than 15 to 20%
free or unused capacity, you could run into trouble. Mine are 40-50%
unused hard drive space, so ample room is available for automatic
Virtual Memory to use that capacity as temporary swap file space.
This is helpful when the computer could use more physical RAM
memory capacity, but doesn't have it. Or if the RAM is maxxed out
and you can't add any more. Virtual Memory is part of OS X and the
system automatically can use as much as is available, but it is better
to be sure there is plenty of resources available to include chip RAM
as well as unused or free hard drive capacity for use as VM.
If for some reason your files in Trash won't go away when you empty
it, you may have to restart. Be sure you have not included any System
files in the content in the Trash, or the Mac may not start up later on.
You may have to boot the computer from the install-restore OS X DVD
and run Repair Disk from its version of Disk Utility, to be sure it's OK.
I'm guessing that by now you know enough about the vintage system
in the older hardware to figure it out, so I won't write about it now.
In any event... hopefully you can simply trash the files, but check them
carefully, & you may need to remove (copy to archive first) even more.
Good luck & happy computing!

Time Machine error message while restoring..."an error occurred while adding a recovery system to the destination disk

I had to change my hard drive in my MBP 15". I use Time Machine on a Time Capsule for backup. I am booting up my laptop with a bootable USB key. I have partitioned my new hard drive (bigger than the old one) and named it Macintosh HD (same as the old one). I select the option to restore from Time Machine Backup. I select one of my latest backup....select my destination drive...the restore process starts but stop within minutes with the following message. "An error occurred while adding a recovery system to the destination disk" It then prompts me to restart....
I need your help...what can it be.
Thanks

I've encountered this issue when the Time Machine was encrypted with FileVault.
Article: HT4718
Additional Information
Please note that OS X Recovery must be present on the computer's startup volume in order to use FileVault 2. Using RAID partitions or a non-standard Boot Camp partition on the startup disk may prevent OS X from installing a local Recovery system. See "OS X: Some features of Mac OS X are not supported for the disk (volume name)" for more information.
What seems to work, is reinstalling the OSX from the internet, and then using migration assistant to pull the user from the time machine backup external when logged into a temporary administrator user to move the original user back over.
Perhaps if you're stubborn, what would work is the following from the same article:
What to do if the installer warns that no Recovery System can be created
Some disk partition configurations may result in the OS X installer reporting that it could not create a Recovery System. In these situations, even if you are permitted to continue the install, you may want to quit the installation and create an external, bootable OS X hard drive with a Recovery System, first. You can continue your OS X upgrade on your computer's startup drive after creating an external Recovery System.
Your storage device must have at least 13 GB available (after formatting) to install OS X Lion or later and a Recovery partition.
These steps erase and reformat the storage device. This article instructs you on setting up a storage device to use the GUID partition scheme and the Mac OS Extended (Journaled) format, which are required to install OS X and a Recovery partition on your external storage device. You should back up any important files that are on the device to a different drive.
This procedure installs a version of OS X that is compatible with the Mac it was created with. Using this OS X system with a different Mac model may produce unpredictable results.
Your computer's serial number is sent to Apple as part of this process to help authenticate your request to download and install OS X Lion.
All of this information was collected by browsing through the public articles on the Apple Support website.

"An unspecified error occurred while performing a conform action on the following file:"

Has anyone else gotten this error in any of their projects? I've searched around Adobe support pages and elsewhere on the internet, but have found nothing.
It comes up in the events window and I can't even read what file it's talking about because it's on the next line, but the error message only shows one line and I haven't figured out a way to expand it.
I'm not even sure if it's causing any problems, or not (the project seems to work ok). This message shows up twice, as a red circle with an 'X' in it, but I also get the following message numerous times referring to a large amount of my .avi files:
"File importer detected an inconsistency in the file structure of filename.avi. Reading and writing this file's metadata (XMP) has been disabled."
That message shows up as a yellow triangle with an '!' in it. Since I haven't been able to turn anything up about these messages, I figured I'd ask here and see if anyone knew what was going on, how to fix the problem or if I should even worry about them.
Thanks.

I am having this problem now when i use dynamic link from Premiere to after effects. I copy the footage from premiere then paste into after effects, i add alittle text maybe some light rays etc save it then go back to premiere. Then i get this message "An unspecified error occurred while performing a conform action on the following file C:\Caches\Media Cache Files\text comp 1 48000.cfa." does anyone have any idea as to what this is? i have had a few problems using the dynamic link from premiere to after effects problems such as Premiere freezing, not playing the after effects comps back in real time, crashes etc. Its as if the 2 programs dont like the dynamic link.
Im running Master Collection CS5 & CS 5.5 on running on a 24gb ram, Intel Core i7 950 @3.07GHz PC with a NVIDIA GeForce GTX470 graphics card.

PRE10 "Unspecified error occurred while performing a conform action on the following file:..."

I really need some help!
I am making a short video on premiere elements 10 and I seem to get this conforming error everytime I open the project and I cannot save it either!!
"Unspecified error occured while performing a conform action on the following file:
File0002.AVI 48000.CFA"
This happens everytime I open premiere elements 10 to lots (or all) of my video clips and I can't find any help in the adobe forums or anywhere else online!
Also, I want to save this video as an AVI file, but when I try to export it, it says it has finished quite quickly and has not even added anything to click on or when it does, it does not play. Sometimes it says it has finished then comes up with: "Error compiling movie. Unknown error". one of these happen everytime that I try to save it.
Lots (or all) of my avi files come up as this same conforming error when I load the project and I have no clue as to what to do!...
It also crashes nearly everytime after these compiling errors!
My computer is running windows 7 ultimate OS
Please help!
Please...!

Operating System
System Model
Windows 7 Ultimate (build 7100)
Gigabyte Technology Co., Ltd. M61PME-S2P
Enclosure Type: Desktop
Processor
Main Circuit Board
2.80 gigahertz AMD Athlon X2 240
256 kilobyte primary memory cache
1024 kilobyte secondary memory cache
64-bit ready
Multi-core (2 total)
Not hyper-threaded
Board: Gigabyte Technology Co., Ltd. M61PME-S2P
Bus Clock: 200 megahertz
BIOS: Award Software International, Inc. F2 12/30/2008
Drives
Memory Modules
320.07 Gigabytes Usable Hard Drive Capacity
125.82 Gigabytes Hard Drive Free Space
TSSTcorp CDDVDW SE-S084C USB Device [Optical drive]
SAMSUNG HD321HJ SCSI Disk Device (320.07 GB) -- drive 0, s/n S13RJ90SB04688, SMART Status: Healthy
1984 Megabytes Usable Installed Memory
Slot 'A0' has 2048 MB
Slot 'A1' is Empty
Local Drive Volumes
c: (NTFS on drive 0) *
319.97 GB
125.76 GB free
d: (NTFS on drive 0)
105 MB
65 MB free
* Operating System is installed on c:
The media files are avi and are in my videos folder (videos-windows 7)

I have Pages as my word processor, but when i reopened a document it was gone, no printing on the page. I;m using the latest Version 09 4.3

I have the Pages 2009, version 4.3 which is the newest update. I have 2 documents(one is a copy) with tables and they contain my id and passwords I use.
Well i have been opening these documents for at least a few months. Today I opened one of the documents and then closed it. I did not save, because i made no changes. When i went back to open the document a few mins later. The entire document was blank and also the kb's amount went down. I tried making another table with the same format and went in and out and saved and opened, no problem.
So what happened to the "data" in my original file and copy file...Please help me...LOL i do have a hard copy so i can make another table, but sometimes i forget to change the hard copy if i make 1 change or so in the computer file.
I mainly worry is this a security issue, does this possibly mean my files have been hacked. I have tried other files and they are opening and closing fine, and no loss of data.
Thanks for your help

I did find my file on the external drive with the data in it, so i made a copy of it...still would like to know what may have happened to the original file...

An exception occurred while reading or writing from/to the IIS server

Hi All,
I am trying to install and configure calendar connectivity in EP6 sp9.
As mentioned in
http://help.sap.com/saphelp_nw04/helpdata/en/1d/3d59fdaa5ebb45967ea107d3fa117a/frameset.htm, i have installed MSX-A component and On testing MSX-A Component i am not getting any error.
Also log file looks like this.
BEGIN 3/8/2005 10:09:00 AM----
URL: HTTP://10.10.18.213:8080/Calendar.asp
URL Parameters: Server=10.10.18.205&Alias=[email protected]&Action=READ&StartDate=200503081007&EndDate=200503091007&Email=[email protected]&Debug=true
Reponse: <?xml version='1.0' encoding='UTF-8' standalone='yes'?>
<!DOCTYPE OUTPUT [<!ELEMENT OUTPUT (FAILURE|APPOINTMENTS)>
<!ELEMENT FAILURE (ERRORNUMBER?, ERRORMESSAGE?, CLASSNAME?, METHODNAME?, LINENUMBER?, PARAMETERS?)>
<!ELEMENT ERRORNUMBER (#PCDATA)>
<!ELEMENT ERRORMESSAGE (#PCDATA)>
<!ELEMENT CLASSNAME (#PCDATA)>
<!ELEMENT METHODNAME (#PCDATA)>
<!ELEMENT LINENUMBER (#PCDATA)>
<!ELEMENT PARAMETERS (#PCDATA)>
<!ELEMENT APPOINTMENTS (APPOINTMENT*)>
<!ELEMENT APPOINTMENT (ID, SUBJECT?, LOCATION?, STARTDATE, ENDDATE, MEETINGTYPE, ALLDAY, RECURRING, BUSYSTATUS?)>
<!ELEMENT ID (#PCDATA)>
<!ELEMENT SUBJECT (#PCDATA)>
<!ELEMENT LOCATION (#PCDATA)>
<!ELEMENT STARTDATE (#PCDATA)>
<!ELEMENT ENDDATE (#PCDATA)>
<!ELEMENT MEETINGTYPE (#PCDATA)>
<!ELEMENT ALLDAY (#PCDATA)>
<!ELEMENT RECURRING (#PCDATA)>
<!ELEMENT BUSYSTATUS (#PCDATA)>]><OUTPUT><APPOINTMENTS></APPOINTMENTS></OUTPUT>
END 3/8/2005 10:09:00 AM----
i have created calendar repository and exchange system on the portal and now i am getting this error in MyAppointment iView in Content Provided by SAP.
An exception occurred while reading or writing from/to the IIS server.
i would appreciate if you please help me urgently
thanx and regards
Santosh Choudhary

Hi Akhilesh,
I am able to browse HelloWorld.asp in same website. Also i am not getting any error while testing data retrieval through SAPPXchTest.exe, log file looks like this.
IIS Log File
IIS Log File
#Software: Microsoft Internet Information Services 5.0
#Version: 1.0
#Date: 2005-03-18 04:44:58
#Fields: date time c-ip cs-username s-ip s-port cs-method cs-uri-stem cs-uri-query sc-status cs(User-Agent)
2005-03-18 04:44:58 10.10.18.213 - 10.10.18.213 8080 GET / - 401 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.0)
2005-03-18 04:45:05 10.10.18.213 santoshc 10.10.18.213 8080 GET / - 200 Mozilla/4.0(compatible;MSIE6.0;WindowsNT5.0)
Application Log File
BEGIN 3/18/2005 10:18:31 AM----
URL: HTTP://10.10.18.213:8080/Calendar.asp
URL Parameters: Server=10.10.18.205&[email protected]&Action=READ&StartDate=200503161151&EndDate=200503171151&[email protected]&Debug=true
Reponse: <?xml version='1.0' encoding='UTF-8' standalone='yes'?>
<!DOCTYPE OUTPUT [<!ELEMENT OUTPUT (FAILURE|APPOINTMENTS)>
<!ELEMENT FAILURE (ERRORNUMBER?, ERRORMESSAGE?, CLASSNAME?, METHODNAME?, LINENUMBER?, PARAMETERS?)>
<!ELEMENT ERRORNUMBER (#PCDATA)>
<!ELEMENT ERRORMESSAGE (#PCDATA)>
<!ELEMENT CLASSNAME (#PCDATA)>
<!ELEMENT METHODNAME (#PCDATA)>
<!ELEMENT LINENUMBER (#PCDATA)>
<!ELEMENT PARAMETERS (#PCDATA)>
<!ELEMENT APPOINTMENTS (APPOINTMENT*)>
<!ELEMENT APPOINTMENT (ID, SUBJECT?, LOCATION?, STARTDATE, ENDDATE, MEETINGTYPE, ALLDAY, RECURRING, BUSYSTATUS?)>
<!ELEMENT ID (#PCDATA)>
<!ELEMENT SUBJECT (#PCDATA)>
<!ELEMENT LOCATION (#PCDATA)>
<!ELEMENT STARTDATE (#PCDATA)>
<!ELEMENT ENDDATE (#PCDATA)>
<!ELEMENT MEETINGTYPE (#PCDATA)>
<!ELEMENT ALLDAY (#PCDATA)>
<!ELEMENT RECURRING (#PCDATA)>
<!ELEMENT BUSYSTATUS (#PCDATA)>]><OUTPUT><APPOINTMENTS></APPOINTMENTS></OUTPUT>
END 3/18/2005 10:18:31 AM----
But when i am Testing it from the Portal i am getting this error.
I have created Exchange Transport that whose configuration looks like this:
System Alias : myExchange
Domain : mydomain
exchange server : 10.10.18.205
IIS server : 10.10.18.213
Port : 8080
Protocol : Http
Exchange is the Name of System and Alias name is myExchange.
Hope this will help you to solve my problem.
Thanks and regards,
Santosh Choudhary

Retail Execution 3.2 Failure occurred while executing user supplied code in the server

Hello,
I am having sync issues while trying to sync data between device and CRM server.
I can register the device in SUP and the app navigates to the home screen of the Rex application. When I try to perform a customer sync for example I get this error in the SUP logs.
2014-07-15 16:26:19.831 ERROR Mobilink Thread-213 [com.sybase.ml.sup.Logger] [-10225] Failure occurred while executing user supplied code in the server
I read on some other post for some other package that the issue was that the package deployed to the SUP server didnt match the application version on the device.
So I went to the SAP marketplace and downloaded the patch for SUP and Rex.
I patched the SUP server to 2.3 SP4.
I then tried deploying the patch for the Rex MBO but get the error below.
Anyone know a way around this?
Regards
Jared

Hello,
Apply the Patch-10510 as per SAP note 1999833 to resolve this error. The patch has to be asked via OSS to component MOB-SUP-RT.
Best Regards,
Rajat.

HT201415 I want to purchase a month of cellular service for my IPAD2. When I use my ITunes password, it states that I have the wrong password but does not offer a way to reset my password. Please advise.

I want to purchase a month of cellular service for my IPAD2. When I use my ITunes password, it states that I have the wrong password but does not offer a way to reset my password. Please advise.

Read through this link and maybe you'll see something that will help you:
http://www.tech-recipes.com/rx/5827/ipad-3g-activating-purchasing-att-cellular-d ata-for-the-ipad-3gwifi/

I have a Macbook pro thats prints fine to my HP printer, but when I try and print from my iMac it doesnt see the pages and just prints two blank pages. Even thou the document is a number of pages

I have a HP Officejet Pro 8500A and I had no problems printing to it from my Mac or Macbook pro. The macbook is wifi and the Mac is cable, I have recently had the printer replaced with an exact model. Since doing that I can only print from the macbook pro, when I try and print from teh mac it doesnt see the pages. It could be a 10 page document and it will just show two blank pages. I have googled the question and have tried deleating the printer and reinstalling without any luck. When I got the new printer I insalled all the latest drivers thats the only thing different.
Could you please help
Michelle

Right click the printer in System Prefences - Print & Scan and use Reset Printing System... and then reinstall the printer, should take less than 5 minutes. Here is a photo showing how to Reset Printing System....

TS4003 everything else works on my iPhone in iCloud but when I try to connect to iCloud on safari I get the page ICloud set up iCloud on this device etc. What's up?

everything else works on my iPhone in iCloud but when I try to connect to iCloud on safari I get the page ICloud set up iCloud on this device etc. What's up?

You cannot connect to iCloud.com from an iOS device, you can only connect from a computer. You can access any of the data in your iCloud account from the appropriate apps on your device (mail, contacts, calendars etc)

Cannot access Adobe Folio Builder using Indesign (CS6) on Windows 7, error message is 'An error has occured while trying to sign in to the Folio Builder Panel' [IMS_ERROR_FAILURE]

Cannot access Adobe Folio Builder using Indesign (CS6) on Windows 7, error message is 'An error has occured while trying to sign in to the Folio Builder Panel' [IMS_ERROR_FAILURE]

Yes, I can open the DPS portal via the Folio Builder panel within InDesign. Although I have created Folios locally within InDesign CS6, the DPS portal is empty and everthing greyed out with just the text "There are no folios to display. Create folios with the folio builder in InDesign".
If I try to sign in within the Folio Builder panel in InDesign, I get the error message [IMS_ERROR_FAILURE] . In addition I am also not able to access the "Help" menu from within InDesign although I am connected to the internet.
To complicate it even further, I am working in the UK whereas all internet control (firewall) and licences are handeled by head office in Germany. I am not sure if this is a firwewall issue or not but if the IT department in Germany could get support from Adobe to understand the access requirements, this may help.
Hopefully using the forum someone out there will know the answer.

HT201263 An error has occured while updating software. Connecting to the server is slow and games etc only run for 60 seconds

An error has occured while updating software. Connecting to the server is slow and games etc only run for 60 seconds

Have you tried resetting your iPad? You may have to restore again if there was a problem.
Try the reset first.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Is it possible - when a pop up occurs while in a site - to have the pop up always open in a certian predetermined area on the page?

Similar Messages

Maybe you are looking for