Is it possible when a skype user log in to a mobile device when he looks "away" to his connection

Me

Not that I am aware of. You might want to file a bug requesting the functionality. https://bugzilla.mozilla.org/

Similar Messages

  • Western Digital My Book World EditionI have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way i get the message 'There was a proble

    I have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way I get the message 'There was a problem connecting to the server "MybookWorld.local" The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem'
    It is a brand new iMac and running Lion OSX
    Any ideas on how to solve would be gratefully received?

    Followed the directions on this page and it worked!
    http://forums.macrumors.com/showthread.php?t=1102423
    Part One - Turn on SSH (in the admin panel)
    [1] Go to to http://mybookworld.local
    [2] login: username will be admin, password will be whatever you have setup. If you can't remember it should be in your Mac OS X keychain (Utilities > Keychain Access, search for "mybookworld"). If you have not changed if from the default the password will be admin as well.
    [3] Switch to advanced mode.
    [4] From the System tab, pick Advanced.
    [5] Enable SSH Access, and click submit.
    [6] Click on the network tab and then the LAN button
    [7] Make a note of the IP address
    Small, maybe obvious, but nevertheless important point: For the install to work, your NAS needs to be connected to a router with internet access.
    Part Two - Install netatalk2.2
    [8] Open Terminal.app (Utilities > Terminal)
    [9] Enter the following command (substitute in 127.0.0.1 for the actual IP address you noted down in step 7), then hit return:
    Code: 
    ssh [email protected]
    [10] When prompted, enter the ssh password (will be welc0me).
    [11] You are now going to download the installer. Enter the following command, then hit return:
    Code: 
    wget http://mybookworld.wikidot.com/local--files/netatalk2-2-on-whitelight/install_netatalk.sh -O install_netatalk.sh
    [12] Once completed, you will need to run the installer. Type:
    Code: 
    sh install_netatalk.sh
    [13] You will be asked a number of question during install, answer yes to all. When asked about the "DHX2 login process", I opted to install the modified version, so I can confirm it works.
    [14] Once the box has restarted, you should be able to connect to your afp shares and continue to use Time Machine.

  • How do I get "iPhone" to show up as a mobile device when I edit contacts?

    How do I get "iPhone" to show up as a mobile device when I edit contacts?

    Hi Chimbo,
    Thanks for visiting Apple Support Communities.
    It sounds like you want to change the label associated with a contact's phone number. See the iPhone User Guide for the steps:
    http://support.apple.com/manuals/#iphone
    Pg. 101 says:
    Edit a contact: Choose a contact, then tap Edit. You can:
    • Change a field label: Tap the label and choose a different one. To add a new field, tap Add Custom Label.
    Regards,
    Jeremy

  • Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

    Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open.   I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
    Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
    Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • Allow spotify to sync on a mobile device when it is idle

    Spotify stops syncing to my mobile device when the app is "idle".  There are a few suggestions on the forums about how to get round this, but they are cludgy workarounds. (play a song on repeat on the device or disable your lockscreen).  Neither of these fit with how I use Spotify and quite frankly this behaviour is ridiculous.
    I am making playlists on my computer and I just want it to sync to my iPod touch / iPhone so that when I am away from my computer it is up to date.  I don't want to have to unlock it every few tracks or it takes all day getting a long playlist on there.
    If I play a track on repeat on the device, then that stops me from doing anything in the app on my computer.
    Surely the best time for Spotify to be syncing is when it is idle.  That seems like the ideal time for me. 
    I want it to carry on syncing regardless of whether the screen is locked or whether I am playing a song at the time.  In fact when I am playing another song that it also needs to sync is probably not the best time anyway!
    The only reason I can see for this behaviour is to do with battery life or something like that, but surely this can either be managed in the settings or when you sync a playlist it could give you a warning or something like that.
    Please sort this out.
    Jon
     

    I'm sure that there are ways round this even if it is iOS's fault.  Essentially when I am doing a synchronisation, the app IS doing something that I want it to be doing - it is NOT idle.  I find it hard to believe that iOS just won't let it do the job that I have specifically asked it to do (download an offline copy of my music).

  • When i go to sync music from my itunes it says "the mobile device is not started" and it doesnt connect. any help?

    when i go to sync music from my itunes it says "the mobile device is not started" and it doesnt connect. any help????

    For Windows:  iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • How can i disable the registration pop up when a new user logs in each time?

    i work at a University and i install FCE 4, it launches and it comes to a registration screen.
    how can i get that registration screen to go away so that when new users log into the Mac
    they wont get that registration screen pop up?
    any help would be great.

    The registration screen should only appear after every 5 launches.
    If you register FCE it will no longer appear assuming it is on the same computer.

  • How do I set iPhone so it isn't recognized as mobile device when browsing?

    The great thing about having a smartphone, and especially the iPhone, is that it has a fully functioning Web browser. There are so many sites out there that still force the iPhone to display and use the dumbed-down mobile sites, however, and without the option to view the regular, full-function site. Contacting the sites' owners about it yields no results. What I'd really like to know is how to make it so that my iPhone is not recognized as a mobile device. I believe the Android has that option; why can't we have it?
    The particular reason I'm asking is that I also use Yahoo business for e-mail, and Yahoo does not allow iPhone users to bypass their mobile mail site. Now, I know what you're going to say: just use the built-in mail feature. In fact I do, but the trouble is that I send and receive lots of mail in the course of my business, and sometimes I need to find a mail I sent a month or several months ago while I'm on the road. The iPhone search function can't help me with that unless I spend an hour downloading all of my sent e-mails from the past months first, and even then it sometimes doesn't find what I'm looking for. The mail search on Yahoo's Web site works perfectly (and quickly!) for that, but for some reason Yahoo doesn't allow me to switch from my personal Yahoo mail to my business Yahoo mail when using their mobile site. I can do so easily on their full-function site, but because I cannot hide that I am a mobile user, I can't access this functionality while I'm away.
    I've already given my feedback about this to Yahoo multiple times, and nothing has been done. Please tell me how I can adjust this setting on the iPhone so that I can view the full-function sites as a non-mobile user.

    When you access a web page, the browser will identify itself to the server as either the desktop or the mobile version and the server will send the appropriate page to the end device. In the case of the iPhone, Safari identifies itself as Mobile Safari, hence the mobile pages. This is very annoying and cannot be changed.
    However, there are third-party browsers which could be set up to identify themselves as desktop browsers. I use the Atomic Web Browser which is fantastic as it has many improved features compared to Mobile Safari. Download it from the AppStore and, in the Settings menu, make it identify as Safari Desktop. It's that simple.

  • My itunes wouldn't open so I uninstalled it.  When I tried to reinstall I got "apple mobile device" failed to start.

    My itunes would not open so I uninstalled it.  When I tried to reinstall it I got an error message.  The message says Service "apple mobile device" (apple mobile device) failed to start.  Verify that you have sufficient priviledges to start system services.  Please help.

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I just updated to the latest version of itunes, now when i plug in iphone it says "apple mobile device service is not started"  what do I do??

    I just updated to the latest version of itunes, n ow when I plug in my iphone, it says it cannot sync because "apple mobile device service is not started"  this never happen before, what do I do??

    The Apple Mobile Device Service is a part of sever programs that "help" iTunes on Windows. It may have been disabled in the Microsoft program, msconfig, or using a third party utility, such as CCleaner.
    I would suggest trying to find and enable the service. To do so, click on the start button, click "run",  and then type "msconfig" look for the iTunes Helper entry and make sure that it's enabled.
    Additionally, there may be another service which you will have to enable. You can type something like "service.msc", (I'm not sure exactly) to see the "Services" control panel and look for it there.
    If you can't find either, feel free to post here again.
    Message was edited by: MoshBerm

  • When dowloading itunes, constantly get error message 'Apple Mobile Device -could not be installed- Verify you have sufficient privileges to install system services.

    When downloading itunes to my pc, get error message 'Apple mobile device could not be installed - verify you have sufficient privileges to install system services'
    i am forced to abort/cancel. Can anyone help please?

    Me too. And if someone comes back on here with the same solution of "uninstall and re-install", please provide further advice after you have done that 3 times and the program still has the same problem in addition to the "failure to load the C runtime library" R6034 issue. I have removed itunes 3 times however I do not have permission to remove the program files/apple file and the uninstall doesn't remove it.
    You're not alone buddy.
    Frustrated.

  • Error 7 came up when updating itunes, told to reinstall but 'apple mobile device' failed to start, check privileges? what does this mean?

    when trying to update itunes error 7 appeared and a message to reinstall. have tried to dowload again but now 'apple mobile device' failed to start, verify you have sufficient privileges? Anyone know what this means. do I ignore?

    I am having this same problem. I took Kappy advice on restarting the Apple Mobile Device Service, however that did not work. I got this message in a pop up window that came up immediately.
    Windows could not start the Apple Mobil Device Service on local computer.
    Error 1053  The service did not respond to the start or control request in a timely fashion.
    I have already uninstalled itunes, all the related programs and I cannot reinstall, this Apple Mobil Device message stops the install.
    Can anyone please help?

  • Revel mobile is set up and working on three devices.  Elements 12 on PC will not allow me to log in to download mobile albums.  Error message indicates can not connect to server. No connectivity issues are occurring on browser.  Why is this happening?

    unable to log in to download mobile albums in elements 12.  Three mobile devices are synced on Revel but can not access them through PC, Elements 12.   Error indicates  cannot connect to server.  No issues with the browser as am able to connect directly to help from Elements.   Why the Error?

    Hi,
    Are you on PSE12 or PSE12.1?
    Is some external USB device plugged in to your system while trying logging in?
    Thanks
    Andaleeb

  • Doesn't install Apple mobile device when I install new version

    I Don't know what to do i've tried at least 20 times uninstalling and reinstalling iTunes and when it gets to the apple mobile device it does a rolling back action. and it wont install. Has anyone else have this problem?

    Not my favorite error to try to troubleshoot.
    Just to get it off the table (it's rare but known), we'd better first try an sfc /scannow to check to see if there's any damage to the usb componentry in your operating system. There's instructions in the following document:
    [How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7|http://support.microsoft.com/kb/929833]
    If the scannow can't repair some files, could you let us know what they're called? (Precise spelling, please.)

  • When creating a custom default user profile for an image, I get the error "A keychain cannot be found to store "safari" when a new user logs in for the first time.

    My "profile" account works flawlessly with the exception of safari. I had copied the entire user template folder to the default location in OS X 10.10 and removed the entire keychain folder. However, whenever someone logs into the computer for the first time and opens Safari, they are greeted with the error message "A keychain cannot be found to store safari".

    If you've just changed your login password in Recovery mode, follow these instructions. Otherwise, see below.
    At some point, you may have reset your keychain to default in Keychain Access. That action would have caused your login keychain to be renamed.
    Back up all data before proceeding.
    In Keychain Access, delete the login keychain from the keychain list. Choose Delete References when prompted, not Delete References & Files.
    Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
    ~/Library/Keychains
    In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V), and press return. A folder will open. Rename the file "login.keychain" in that folder to something like "login-old.keychain". Rename the file "login_renamed_1.keychain" to "login.keychain". You can then close the folder.
    Back in Keychain Access, select 
              File ▹ Add Keychain...
    from the menu bar. Add back the file now named "login.keychain". If any of your needed keychain items are missing from it, also add back the file you named "login-old.keychain". I suggest you transfer any needed items from that keychain to the login keychain, then delete it. The transfers are made by drag-and-drop in Keychain Access. You'll need to enter your password for each item transferred.

Maybe you are looking for

  • Problem with installing programs after the new update.

    I am having a problem with mounting downloads. I tried installing a download and in the dowload manager it says the disk could not be mounted about 2mins later i get a warning telling me the device is not configured. I had the same problem as everyon

  • How can I install new windows on NB200-10z without a CD drive?

    Hi, I have a mini laptop "Toshiba nb200-10z" and it doesnt startup anymore. I would like to do a recovery, but it also doesnt work. I know there is a shortcut like press the 0 button when the laptop is starting up. With this shortcut you can start th

  • Relationship deletion of BP in CRM

    Hi Friends, My Requirement is to delete a relationship Contact person of a BP. when i delete it system shows an Error message that " Contact person still been used, can not be deleted". can anyone tell how to delimit the validity period of a relation

  • Can we develop new page and run separately

    i want to know about the oracle 9i jdeveloper, is there any way to run on oracle9i because when we are going to develop page he take path for DBC file which is not available in local 9i database i mean just we have installed oracle 9i database rather

  • How to select a locale for parser error messages

    Does anybody know how I can select a locale for parser error messages? I found org.xml.sax.Parser.setLocale, but that's for SAX1 and deprecated. I have a textarea in the user interface where a user can edit XML and, of course, I'd like the parsing er