Is it possible?? - Will HP ePrint talk to a local networked HP printer that is NOT ePrint enabled?

Hello,
I'm looking for help with configuring HP ePrint Home and Bus (Android)
System:
Netgear WNDR3400 router
Google Nexus 10 Tablet
Custom built PC- Windows XP Pro
HP Photosmart C5250 (connected to an IOGear USB Printserver)
Both my main desktop PC and my laptop can print to the HP Photosmart C5200 thru the USB print server, it is working fine.
QUESTION:
How do I configure HP ePrint home and Bus on my Google tablet to print to my networked HP printer?
I cannot get the HP ePrint app to SEE my networked printer!
Thanks,
Unit_10
Please disregard any instructions for setting up WAN ePrinting. Entirely unnecessary,

The printer must be on the network directly for the app to see it. Using a USB print server is likely where your issue is occuring. If you had a printer that supported wireless or ethernet, it would be seen via the app.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

Similar Messages

HT4528 is it possible to print from an i-phone or iPad to a printer that is not Airprint enabled? We have hp officejet 6310 hardwired to wireless router talking to ipad/iphone.

How do we print from our iphone or ipad? Printer is not listed as airprint enabled. HP officejet 6310 hardwired to wireless router that talks to the apples.

I use FingerPrint from collobos.com to print to my non-airprint printers. If you look at their FAQs, you will find information on a trial basis to see if it works for you.

Is it possible to install PVM without DHCP in local network?

Hi!
We have main DHCP server in our company and i don't have access to it. So, it's difficult to install PVM from Network or i don't understand how to do in.
I created kickstart file and shared OEL DVD, also i configured VM as:
uuid = '0004fb00-0006-0000-db66-e8f031d2e557'
bootloader = '/usr/bin/xenpvboot'
vif = ['mac=00:21:f6:00:00:13,bridge=192.168.18.0']
name = '0004fb0000060000db66e8f031d2e557'
OVM_description = ''
guest_os_type = 'linux'
OVM_simple_name = 'pvm3'
on_poweroff = 'destroy'
boot = 'nc'
vfb = ['type=vnc,vncunused=1,vnclisten=127.0.0.1']
on_crash = 'restart'
on_reboot = 'restart'
vcpus = 2
cpu_weight = 27500
OVM_os_type = 'Oracle Linux 5'
memory = 4096
cpu_cap = 0
OVM_high_availability = False
disk = ['file:/OVS/Repositories/0004fb00000300007ab59846cb716517/VirtualDisks/0004fb0000120000193b8eda68cef44c.img,xvda,w', 'file:/OVS/Repositories/0004fb00000300007ab59846cb716517/ISOs/0004fb000015000013989eb97049c582.iso,xvdb:cdrom,r']
maxmem = 4096
bootargs = '--args network device eth0 bootproto static ip 192.168.18.182 netmask 255.255.255.0 --gateway 192.168.18.254 ks=http://192.168.12.93/KickStart.OEL.profiles/ks.cfg http://192.168.12.93/OracleLinux/DVD/'
VM starts but nothing happens. VM Manager shows that it has "Starting" state. Http server doen't have any request from my VM.
xend.log:
[2012-01-30 16:40:11 5530] DEBUG (XendDomainInfo:104) XendDomainInfo.create(['vm', ['name', '0004fb0000060000db66e8f031d2e557'], ['memory', 4096], ['maxmem', 4096], ['on_poweroff', 'destroy'], ['on_reboot', 'restart'], ['on_crash', 'restart'], ['on_xend_start', 'ignore'], ['on_xend_stop', 'ignore'], ['vcpus', 2], ['uuid', '0004fb00-0006-0000-db66-e8f031d2e557'], ['cpu_cap', 0], ['cpu_weight', 27500], ['oos', 1], ['bootloader', '/usr/bin/xenpvboot'], ['bootloader_args', '--args network device eth0 bootproto static ip 192.168.18.182 netmask 255.255.255.0 --gateway 192.168.18.254 ks=http://192.168.12.93/KickStart.OEL.profiles/ks.cfg http://192.168.12.93/OracleLinux/DVD/'], ['image', ['linux', ['videoram', 4], ['tsc_mode', 0], ['nomigrate', 0]]], ['s3_integrity', 1], ['device', ['vbd', ['uname', 'file:/OVS/Repositories/0004fb00000300007ab59846cb716517/VirtualDisks/0004fb0000120000193b8eda68cef44c.img'], ['dev', 'xvda'], ['mode', 'w']]], ['device', ['vbd', ['uname', 'file:/OVS/Repositories/0004fb00000300007ab59846cb716517/ISOs/0004fb000015000013989eb97049c582.iso'], ['dev', 'xvdb:cdrom'], ['mode', 'r']]], ['device', ['vif', ['bridge', '192.168.18.0'], ['mac', '00:21:f6:00:00:13']]], ['device', ['vkbd']], ['device', ['vfb', ['vncunused', '1'], ['vnc', '1'], ['vnclisten', '127.0.0.1'], ['xauthority', '//.Xauthority']]]])
[2012-01-30 16:40:11 5530] DEBUG (XendDomainInfo:2576) XendDomainInfo.constructDomain
[2012-01-30 16:40:11 5530] DEBUG (balloon:220) Balloon: 15733844 KiB free; need 16384; done.
[2012-01-30 16:40:11 5530] DEBUG (XendDomain:464) Adding Domain: 1
[2012-01-30 16:40:11 5530] DEBUG (XendDomainInfo:2886) XendDomainInfo.initDomain: 1 27500
[2012-01-30 16:40:11 6246] DEBUG (XendBootloader:113) Launching bootloader as ['/usr/bin/xenpvboot', '--output=/var/run/xend/boot/xenbl.1505', '--args', 'network', '--device', 'eth0', '--bootproto', 'static', '--ip', '192.168.18.182', '--netmask', '255.255.255.0', '--gateway', '192.168.18.254', 'ks=http://192.168.12.93/KickStart.OEL.profiles/ks.cfg', 'http://192.168.12.93/OracleLinux/DVD/', '/OVS/Repositories/0004fb00000300007ab59846cb716517/VirtualDisks/0004fb0000120000193b8eda68cef44c.img'].

Yes, you are a genius!!!
It works! Thanks a lot!
Is it possible to update OVS documentation? It think, it's quite important to have such example of configuration.
Final vm.cfg:
uuid = '0004fb00-0006-0000-db66-e8f031d2e557'
bootloader = '/usr/bin/xenpvboot'
vif = ['mac=00:21:f6:00:00:13,bridge=192.168.18.0']
name = '0004fb0000060000db66e8f031d2e557'
OVM_description = ''
guest_os_type = 'linux'
OVM_simple_name = 'pvm3'
on_poweroff = 'destroy'
boot = 'nc'
vfb = ['type=vnc,vncunused=1,vnclisten=127.0.0.1']
on_crash = 'restart'
on_reboot = 'restart'
vcpus = 2
cpu_weight = 27500
OVM_os_type = 'Oracle Linux 5'
memory = 4096
cpu_cap = 0
OVM_high_availability = False
disk = ['file:/OVS/Repositories/0004fb00000300007ab59846cb716517/VirtualDisks/0004fb0000120000193b8eda68cef44c.img,xvda,w', 'file:/OVS/Repositories/0004fb00000300007ab59846cb716517/ISOs/0004fb000015000013989eb97049c582.iso,xvdb:cdrom,r']
maxmem = 4096
bootargs = '--kernel images/xen/vmlinuz ramdisk images/xen/initrd.img args="ksdevice=eth0 network bootproto=static ip=192.168.18.182 netmask=255.255.255.0 gateway=192.168.18.254 ks=http://192.168.12.93/KickStart.OEL.profiles/ks.cfg" http://192.168.12.93/OracleLinux/DVD/'

Will there be a solution for the dock stereo systems that do not charge?

I have the JBL Radial and it will not charge the 3G...Before I buy a new one is there a solution to this???

Good question for JBL.
If a product does not include the "made for iPhone" designation, no.
Some products that don't include this may work with the first generation iPhone but not with the iPhone 3G.

Is it possible to print to a printer that does not use airprint

i have a laser printer connected to my imac and is not a wireless one but i have configured it to so that laptops can print to it from upstairs. is it possible to use air print on iphone to that printer using air print

http://www.tuaw.com/2010/11/29/airprint-hacktivator-enables-airprint-for-any-pri nter/
or:
http://www.ecamm.com/mac/printopia/

I am looking to find out if it is possible in Adobe Muse to have a section on a webpage that will update every 30 seconds or 30 minutes with a snapshot URL From a live webcam stream

I am looking to find out if it is possible in Adobe Muse to have a section on a webpage that will update every 30 seconds or 30 minutes with a snapshot URL From a live webcam stream

You can do this via insert HTML , you would need to use the live feed code in Muse page.
Thanks,
Sanjit

I have a small production client looking to run 1 workstation running Mac Lion 10.7.3 and two work stations running Windows7 64 bit. They will all be talking to the same storage array through 8Gb FC. What is there most cost effective way to do this?

I have a small production client looking to run 1 workstation running Mac Lion 10.7.3 and two work stations running Windows7 64 bit. They will all be talking to the same storage array through 8Gb FC. What is there most cost effective way to do this?

Thank you for your help.
The client has already made the jump to 8Gb including HBA's, switch and RAID Storage.
The other question will be if they need a seperate Mac Server to run the Meta Data or are they able to use the current Mac they are running to do this?
The Mac is a 201073 model they say with 12 Dual Core 2.66Mhz processors and 16 GB of Memory. This system is currently doing rendering. It has the XSAN Client but I understand for the solution to work they need to also run XSAN Server on a MDC.

Incorrect billing. will somebody please talk to me

On 11th Oct I was charged for two credit topups when I had used none, as my usage page confirms.
I was also billed for 'Unlimited World 12 months' whatever that is.
Altogether I was ripped off over 80GBP in less than 2 hours.
will somebody please talk to me about this?

Hi, dmarshlaptop, and welcome to the Community,
Please see this FAQ article for next steps:
https://support.skype.com/en/faq/FA10384/why-has-my-credit-debit-card-been-charged-by-skype-when-i-h...
Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
Skype is aware of lingering problems with the website when contacting their customer service agents. If you experience difficulty reaching Skype Customer Service or find yourself redirected back to the Community, please try again using a different web browser and choosing a different path through the various drop-down menu options presented. Also, look to approve a pop-up dialogue box which would connect you to start an instant message chat with a customer service agent. If you have pop-ups blocked in your browser settings, this will also impede reaching an agent.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

I am on windows 7 and I upgraded to 10.0.2 and now it will not open. I have removed firefox completely and uploaded it again and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version and once again nothing.

I am on windows 7 and I upgraded to the newest verison of firefox and now it will not open. I have removed firefox completely and uploaded it again and that did not work. I then made sure it could get through my firewall and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version hoping that would do it and once again nothing. It will not open at all. Please help - is there a live chat or a number to talk to someone at Firefox?

I think when uninstalling you may also have to choose (tick) to delete the preferences and other personal data like the bookmarks, stored passwords etc. to erase completely. If you are installing afresh, please try right-clicking on the file and '''Run as administrator''' to install. And when uninstalling, please also make sure choose to delete all data and also manually delete any '''Mozilla''', '''Mozilla Firefox''' or '''Firefox''' from %appdata%, %localappdata% and %programfiles%. You can open a location by typing for eg. %appdata% in the '''Run''' box (Windows key + R). You may also have to check the '''VirtualStore''' folder in %localappdata%. Files in the VirtualStore can be problematic. I think a clean installation may help.
[https://www.mozilla.org/en-US/firefox/new/ Firefox]
[http://kb.mozillazine.org/Installation_directory Installation Folder]
[http://kb.mozillazine.org/Profile_folder Profile Folder]
Please note that using system restore would usually damage the Firefox installation.

How can I print only the emailed attachment to my ePrint enabled printer?

I have ePrint working fine. I was able to email an attachment to the printer from many miles away. To prevent wasting paper, I'd like to be able to tell my printer or ePrint Center to just print the attachment, not the email it is attached to.
I have an HP OfficeJet 6500A.

Hi Sparty80,
The way ePrint is designed, it will print the body of the email and any supported attachments. The only way to print the attachment and not the body of the email is to attach the document to a blank email, or delete the body in the email when you forward the message, which maybe easier.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

I would appreciate it if someone could advise me as to the optimum resolution, dimensions and dpi for actual photographic slides that I am scanning for use in a Keynote Presentation, that will be projected in a large auditorium. I realize that most proje

I would appreciate it if someone could advise me as to the optimum resolution, dimensions and dpi for actual photographic slides that I am scanning for use in a Keynote Presentation, that will be projected in a large auditorium. I realize that most projectors in auditoriums that I will be using have 1024 x 1200 pixels, and possibly 1600 x 1200. There is no reference to this issue in the Keynote Tutorial supplied by Apple, and I have never found a definitive answer to this issue online (although there may be one).
Here’s my question: When scanning my photographic slides, what setting, from 72 dpi to 300 dpi, would result in the best image quality and use up the most efficient amount of space?
Here’s what two different photo slide scanning service suppliers have told me:
Supplier No. 1 tells me that they can scan slides to a size of 1544 x 1024 pixels, at 72 dpi, which will be 763 KB, and they refer to this as low resolution (a JPEG). However, I noticed when I looked at these scanned slides, the size of the slides varied, with a maximum of 1.8 MB. This supplier says that the dpi doesn’t matter when it comes to the quality of the final digital image, that it is the dimensions that matter. They say that if they scanned a slide to a higher resolution (2048 x 3072), they would still scan it at 72 dpi.
Supplier No. 2: They tell me that in order to have a high quality image made from a photographic slide (starting with a 35 mm slide, in all cases), I need to have a “1280 pixel dimension slide, a JPEG, at 300 dpi, that is 8 MB per image.” However, this supplier also offers, on its list of services, a “Standard Resolution JPEG (4MB file/image – 3088 x 2048), as well as a “High Resolution JPEG (8 MB file/image – 3088x2048).
I will be presenting my Keynotes with my MacBook Pro, and will not have a chance to try out the presentations in advance, since the lecture location is far from my home, so that is not an option.
I do not want to use up more memory than necessary on my laptop. I also want to have the best quality image.
One more question: When scanning images myself, on my own scanner, for my Keynote presentations, would I be better off scanning them as JPEGs or TIFFs? I have been told that a TIFF is better because it is less compressed.
Any enlightenment on this subject would be appreciated.
Thank you.

When it comes to Keynote, I try and start with a presentation that's 1680 x 1050 preset or something in that range. Most projectors that you'll get at a conference won't project much higher than that and if they run at a lower resolution, it's better to have the device downsize your Keynote. Anything is better than having the projector try and upsize your presentation... you work hard to make it look good, and it's mangled by some tired Epson projector.
As far as slides go, scan them in at 150 dpi or better, and make them at least the dimensions of your presentation. Keynote is really only wanting 72dpi, but I do them at 150, just in case I need to print out the presentation as a handout later, and having the pix at 150 dpi gives me a little help with their quality on a printer.
You'd probably have to drop in the 150 versions again if you output the Keynote to .pdf or Word or something, but at least you have the option.
And Gary's right (above) go ahead and scan them as TIFFs. Sooner or later you'll want to do something else with these slides (like make something for an iPad or the like) and having them as TIFFs keeps your presentation looking good.
Finally, and this is a big one, get to the location for your presentation ahead of time if you can, and plug the laptop in and see what you get. There's always connection problems. Don't let the AV bonehead tell you everything will work just fine ('... I don't have any adapters for a Mac...') . See it for yourself... you're the one that's standing up there. Unless it's your boss, then you better be really sure it works.

I am moving to Alice Springs, Australia, this summer from the U.S. I would like to get the new iPad. How can I found out if I will be able to access all the functionality in Alice? Will I need to purchase a local plan of some sort?

I am moving to Alice Springs, Australia, this summer from the U.S. I would like to get the new iPad to use while traveling back and forth from the U.S. to Australia, and within Australia. How can I found out if I will be able to access all the functionality of the iPad in Alice? Will I need to purchase a local plan of some sort? I have never owned an Apple product before -- I'm a newby!

Aside form the limitation of LTE to the 700MHz and 2.1GHz bands (which rules out LTE in Europe I gather, at least as it stands now) the new iPad should let you use a GSM 3g/2g/edge network anywhere. The CDMA Verizon model will only be able to use it's native CDMA radio band in the USA (that radio will be locked to Verizon), but it's international GSM radio is the same as the AT&T model.
Keep in mind though that by far the cheapest option when abroad is to take advantage of free wifi as much as possible (well, that is always the cheapest option, since it is free). I know several people who have taken their wifi-only iPads and iPad2s to Europe and said they did not find the lack of 3G really inconvenient at all as most towns had plenty of free or cheap wifi access all over the place.
And in 3 years, your iPad will be at least 2-3 generations behind, LTE will have already been replaced by 5G or whatever the next new generation of cellular ends up being named (and the "young" kids will be wondering what the heck 3G even means or meant - dang that stuff was from the olden days!), and you can pitch that ancient piece of technology and start things all over again

Is it possible to send a text to several contacts at the same time and not have their replies go to everyone on the list? I have an iphone 4s and most of the people I am texting also have iPhones. I do have group messaging turned off.

Is it possible to send a text from the iphone 4s to several contacts and not have their replies go to everyone else on the original text? I have group messaging turned off but this seems to do nothing.

Do this instead:
Email everyone instead of texting and use BCC: which will hide all of the people's emails.

TS1702 i have erased my all phone contact list and then the message comes that it will be deleted with in an hour. but now my phone is not starting and only the apple logo appears on the screen. what should i do now..!

i have erased my all phone contact list and then the message comes that it will be deleted with in an hour. but now my phone is not starting and only the apple logo appears on the screen. what should i do now..!

That number is for an apple server in the UK that is used for iMessage activation. A hidden SMS is snet to that number when you turn iMessage on and is used to verify your phone number. I suggest you turn iMessage off. In settings/phone turn on dial assist. Check with your carrier to see if you can send an international SMS as you end that possibility to activate iMessage. Rest your phone (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).) then turn iMessage back on.

I am unable to print only the first few lines of an e-mail. Also, it will then print in a very small type and will also include extraneous information on the screen that are not part of the e-mail. Is there anything I can do about this annoying problem?

I can only print the first few lines of an e-mail, even when it is on "Full View" on my screen. Moreover, it prints with very small print that is hard to read and also contains additional material on the screen that is not part of the e-mail.
== This happened ==
Every time Firefox opened
== Since the first day I started using Firefox

I talked to Adobe Support tonight and found this issue to be a known problem with some of the Adobe Cloud products when using older hardware, in this case the C782.
So, we found a workaround. Unfortunately the work around isn’t efficient and adds more steps to their normal printing routine
Open InDesign and create, modify delete the card
Select FileàExport
A window will appear. Pick the location you wish to save the file
Once the File is saved another window will appear
“EXPORT Adobe PDF”
An Export to Adobe PDF window will appear. Accept all defaults. MAKE CERTAIN “VIEW PDF
After EXPORTING” is CHECKED
Select Export
Once EXPORT is complete the file will open automatically in Adobe Acrobat
Most likely the screen will be very large
Select the + - sign at the top of the page to adjust the page size to view the image
Select FileàPrint
The Print window will appear
Select the printer from the drop down
# of COPIES is just below Printer
Select OK
I hope this helps anyone who is having similar issues
Thanks

Is it possible?? - Will HP ePrint talk to a local networked HP printer that is NOT ePrint enabled?

Similar Messages

Maybe you are looking for