Is it possible work (compile and link wi

thout errors) very well one program written and compiled on Linux with gcc command for C program into Labview ? I know Labview support C codes, but I don't know if support some program done on another operating system, like Linux with other compiler (gcc).Is it possible work (compile and link without errors) very well one program written and compiled on Linux with gcc command for C program into Labview ? I know Labview support C codes, but I don't know if support some program done on another operating system, like Linux with other compiler (gcc). Because in Linux we have different device drivers (/dev/*) to access peripherals, like serial port RS-232. However, can I copy source code from Linux to "Call library Functional Node"
tool ? And work it very well like in Linux before ?

thout errors) very well one program written and compiled on Linux with gcc command for C program into Labview ? I know Labview support C codes, but I don't know if support some program done on another operating system, like Linux with other compiler (gcc).Hopefully, the differences in the implementations of the language itself would be fairly well documented. Therefore I would suspect that the biggest problem you'll have in this port is when the code starts trying to connect to the outside world--like the serial ports you mentioned.
Personally, if I had documented C code (or at least a reasonable description of what the code is supposed to do) I would say to heck with CINs and just port the application to LV. You probibly won't spend any more time doing a complete port and the result will be more extensible and maintainable that the C ever was (or could ever be). But that's just me and my aversion to doing things the hard way...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Similar Messages

Compiling and linking C library in C++

I am using a C library (Solstice FTAM v9.0) in my C++ program. One of the library header files has a declrartion
short class;
in one of the structures.
The C++ compiler (Sun C++ 5.4 on Solaris 8) gives error. What we should do to compile and link this library in C++.

You can use pointer to this structure without including the header that contains its definition, if it is possible, of course.
Also, it should be possible to #define class to smth else just before including this header and then #undef'ing it. If this C library comes in binary form, it shouldn't cause any problems since memory layout won't be affected; if it comes in source code form, you can always compile it with -Dclass=smth_else on the command line and reference this foul structure field from your C++ code accordingly.

Runtime error after successful compile and link with cl.exe

Finally, got the configuration for cl.exe and link.exe right and got a successful compile and link to produce a dll. Then ran the main method of my Java class. The main method calls the constructor, and loading the class runs the static block which loads the native dll. I get one of those error files of the type hs_err_pid4064.log. The file is as follows:
# An unexpected error has been detected by Java Runtime Environment:
# Internal Error (0xe06d7363), pid=4064, tid=3576
# Java VM: Java HotSpot(TM) Client VM (10.0-b22 mixed mode, sharing windows-x86)
# Problematic frame:
# C [kernel32.dll+0x12aeb]
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
--------------- T H R E A D ---------------
Current thread (0x00395800): JavaThread "main" [_thread_in_native, id=3576, stack(0x003b0000,0x00400000)]
siginfo: ExceptionCode=0xe06d7363, ExceptionInformation=0x19930520 0x003fdf14 0x02de7b04
Registers:
EAX=0x003fde4c, EBX=0x00000000, ECX=0x00000000, EDX=0x02f80600
ESP=0x003fde48, EBP=0x003fde9c, ESI=0x003fdedc, EDI=0x003fdedc
EIP=0x7c812aeb, EFLAGS=0x00000206
Top of Stack: (sp=0x003fde48)
0x003fde48: 02de1de0 e06d7363 00000001 00000000
0x003fde58: 7c812aeb 00000003 19930520 003fdf14
0x003fde68: 02de7b04 02e80087 003fdf14 003fdf28
0x003fde78: 02e99500 00000039 003fde70 00000039
0x003fde88: 003fdec8 02e81a50 02eabf00 003fdf14
0x003fde98: 003fdf28 003fdedc 02dce583 e06d7363
0x003fdea8: 00000001 00000003 003fded0 02a72388
0x003fdeb8: 00000000 e06d7363 00000001 00000000
Instructions: (pc=0x7c812aeb)
0x7c812adb: 8d 7d c4 f3 a5 5f 8d 45 b0 50 ff 15 10 15 80 7c
0x7c812aeb: 5e c9 c2 10 00 85 ff 0f 8e 36 93 ff ff 8b 55 fc
Stack: [0x003b0000,0x00400000], sp=0x003fde48, free space=311k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [kernel32.dll+0x12aeb]
C [summarizer37.dll+0x1e583]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::StubRoutines (1)
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x02a66000 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3108, stack(0x02d10000,0x02d60000)]
0x02a58000 JavaThread "CompilerThread0" daemon [_thread_blocked, id=2488, stack(0x02cc0000,0x02d10000)]
0x02a56c00 JavaThread "Attach Listener" daemon [_thread_blocked, id=2508, stack(0x02c70000,0x02cc0000)]
0x02a56000 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=3720, stack(0x02c20000,0x02c70000)]
0x02a51800 JavaThread "Finalizer" daemon [_thread_blocked, id=2968, stack(0x02bd0000,0x02c20000)]
0x02a4d400 JavaThread "Reference Handler" daemon [_thread_blocked, id=600, stack(0x02b80000,0x02bd0000)]
=>0x00395800 JavaThread "main" [_thread_in_native, id=3576, stack(0x003b0000,0x00400000)]
Other Threads:
0x02a4c000 VMThread [stack: 0x02b30000,0x02b80000] [id=2528]
0x02a67000 WatcherThread [stack: 0x02d60000,0x02db0000] [id=1604]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 960K, used 195K [0x22960000, 0x22a60000, 0x22e40000)
eden space 896K, 21% used [0x22960000, 0x22990c38, 0x22a40000)
from space 64K, 0% used [0x22a40000, 0x22a40000, 0x22a50000)
to space 64K, 0% used [0x22a50000, 0x22a50000, 0x22a60000)
tenured generation total 4096K, used 0K [0x22e40000, 0x23240000, 0x26960000)
the space 4096K, 0% used [0x22e40000, 0x22e40000, 0x22e40200, 0x23240000)
compacting perm gen total 12288K, used 22K [0x26960000, 0x27560000, 0x2a960000)
the space 12288K, 0% used [0x26960000, 0x269658c8, 0x26965a00, 0x27560000)
ro space 8192K, 66% used [0x2a960000, 0x2aeb0e10, 0x2aeb1000, 0x2b160000)
rw space 12288K, 52% used [0x2b160000, 0x2b7b04c8, 0x2b7b0600, 0x2bd60000)
Dynamic libraries:
0x00400000 - 0x00423000      C:\Program Files\Java\jdk1.6.0_06\bin\javaw.exe
0x7c900000 - 0x7c9af000      C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c8f6000      C:\WINDOWS\system32\kernel32.dll
0x77dd0000 - 0x77e6b000      C:\WINDOWS\system32\ADVAPI32.dll
0x77e70000 - 0x77f02000      C:\WINDOWS\system32\RPCRT4.dll
0x77fe0000 - 0x77ff1000      C:\WINDOWS\system32\Secur32.dll
0x7e410000 - 0x7e4a1000      C:\WINDOWS\system32\USER32.dll
0x77f10000 - 0x77f59000      C:\WINDOWS\system32\GDI32.dll
0x7c340000 - 0x7c396000      C:\Program Files\Java\jdk1.6.0_06\jre\bin\msvcr71.dll
0x6d870000 - 0x6dac0000      C:\Program Files\Java\jdk1.6.0_06\jre\bin\client\jvm.dll
0x76b40000 - 0x76b6d000      C:\WINDOWS\system32\WINMM.dll
0x6d320000 - 0x6d328000      C:\Program Files\Java\jdk1.6.0_06\jre\bin\hpi.dll
0x76bf0000 - 0x76bfb000      C:\WINDOWS\system32\PSAPI.DLL
0x6d820000 - 0x6d82c000      C:\Program Files\Java\jdk1.6.0_06\jre\bin\verify.dll
0x6d3c0000 - 0x6d3df000      C:\Program Files\Java\jdk1.6.0_06\jre\bin\java.dll
0x6d860000 - 0x6d86f000      C:\Program Files\Java\jdk1.6.0_06\jre\bin\zip.dll
0x10000000 - 0x10006000      D:\Servers\SummarizerServer\native\jsummarizer.dll
0x02db0000 - 0x02df2000      D:\Servers\SummarizerServer\native\summarizer37.dll
0x02e00000 - 0x02f6d000      D:\Servers\SummarizerServer\native\platform37.dll
0x4a800000 - 0x4a893000      D:\Servers\SummarizerServer\native\icuuc30.dll
0x4ad00000 - 0x4b52d000      D:\Servers\SummarizerServer\native\icudt30.dll
0x5b860000 - 0x5b8b5000      C:\WINDOWS\system32\NETAPI32.dll
0x77c10000 - 0x77c68000      C:\WINDOWS\system32\msvcrt.dll
VM Arguments:
jvm_args: -Djava.library.path=native
java_command: com.sra.pipeline.servers.summarizer.JSummarizer
Launcher Type: SUN_STANDARD
Environment Variables:
JAVA_HOME=C:\Program Files\Java\jdk1.6.0_06
CLASSPATH=.;C:\Program Files\Java\jre1.6.0_06\lib\ext\QTJava.zip
PATH=D:\Servers\SummarizerServer\native;C:\Program Files\Microsoft Visual Studio 9.0\VC\redist\x86\Microsoft.VC90.CRT
USERNAME=Jim Jones
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 15 Model 2 Stepping 7, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 3
CPU:total 1 (1 cores per cpu, 1 threads per core) family 15 model 2 stepping 7, cmov, cx8, fxsr, mmx, sse, sse2
Memory: 4k page, physical 1048032k(245796k free), swap 2521804k(1060880k free)
vm_info: Java HotSpot(TM) Client VM (10.0-b22) for windows-x86 JRE (1.6.0_06-b02), built on Mar 25 2008 01:22:05 by "java_re" with MS VC++ 7.1
time: Mon Sep 01 15:22:10 2008
elapsed time: 0 seconds
The dll I'm wrapping is C++ VC++ compiled.
Would like to know what I do to trouble-shoot this error and hope to fix it?
Jim

Using Java print statement was able to show that the my JNI dll was being loaded and that the problem was in the first call to one of my JNI functions. Then by using "DebugBreak()" in that function and gradually moving it down line by line through the function was able to isolate the line causing the problem. Unfortunately it is the line where I call a function from the dll I'm wrapping. See newer thread.

OCI: Compiling and Linking?

At the end of Chapter 1 of the OCI documentation, under
"Compiling and Linking", it says:
The details of linking an OCI program vary from system to
system. See your Oracle system-specific documentation and the
installation guide for more information about compiling and
linking an OCI application for your specific platform.
...except that none of the Linux-specific documentation online
(including the installation guide) covers compiling and linking.
I tried linking with libclntsh.so, but it gets an unresolved
symbol (slpmprodstab). I found this symbol in several of the .a
and .o files, but linking with them leads to other unresolved
symbols. Can someone please tell me what to do and/or point me
to the right documentation?
null

John,
I'm using:
export ORACLE_HOME=/oracle ### this is the must
make -f demo_rdbms.mk cdemo1 ### etc
Good luck.
John Stracke (guest) wrote:
: At the end of Chapter 1 of the OCI documentation, under
: "Compiling and Linking", it says:
: The details of linking an OCI program vary from system to
: system. See your Oracle system-specific documentation and the
: installation guide for more information about compiling and
: linking an OCI application for your specific platform.
: ...except that none of the Linux-specific documentation online
: (including the installation guide) covers compiling and
linking.
: I tried linking with libclntsh.so, but it gets an unresolved
: symbol (slpmprodstab). I found this symbol in several of the
.a
: and .o files, but linking with them leads to other unresolved
: symbols. Can someone please tell me what to do and/or point me
: to the right documentation?
null

How to compile and link a C program that uses the FSEvents framework

I've been trying to compile a program from the command line that uses the FSEvents framework. I can compile and link the code in Xcode and it runs correctly.
At the moment I have the following command line:
cc -Wall -g -o Watcher *.c -framework CoreFoundation -framework FSEvents
I'm running Snow Leopard and noticed that FSEvents is not in the Frameworks directory under /System/Library as it was in Leopard.
The link error is:
ld: framework not found FSEvents
collect2: ld returned 1 exit status

I'm not sure what the point is if it builds in Xcode, but the build log should show you every command it uses throughout the process--copy and paste.

Using GCC on SunSolaris2.8 to compile and link sample OCI programs

Hi,
Does anyone have sample make file (or modified version of demo_rdbms.mk) or command to compile and link OCI demo programs using gcc?? I am trying to compile and link cdemo81.c from rdbms/demo directory.
gcc related files are under /usr/local/bin and /usr/local/lib, /us/local/lib/gcc-lib/sparc-sun-solaris2.8/3.1
Thanks

Hi,
I finally got cdemo81.c to compile and link on Solaris 8 using Oracle 8.1.7.3. I got some help from one other person who had posted similar question on this forum. Following is the makefile that I am currently using to compile my oci code. Please note that you need to have $(ORACLE_HOME) and LD_LIBRARTY_PATH set before you try to compile using gcc.
************** Makefile Starts here ***********************************
CPP=g++
CC=gcc
LD=ld
CCFLAGS= -g
CPPFLAGS=-g3 -Wall
INCDIR=-I$(ORACLE_HOME)/rdbms/demo -I$(ORACLE_HOME)/rdbms/public -I$(ORACLE_HOME)/plsql/public -I$(ORACLE_HOME)/network/public
LIBNAME=liboralib
SOEXT=.so
DLLINK=-shared -ldl
###SOFLAGS=-shared -Wl,-expect_unresolved -Wl,-soname,$(LIBNAME)$(SOEXT) $(LIBPATH)
SOFLAGS=-shared -Wl
LDFLAGS=-shared -expect_unresolved * -soname
LIBPATH=-L$(ORACLE_HOME)/lib/ -L$(ORACLE_HOME)/rdbms/lib/ -R$(ORACLE_HOME)/lib/ -R$(ORACLE_HOME)/rdbms/lib/
ORALIBS= -lnbeq8 -lnhost8 -lnus8 -lnldap8 -lldapclnt8 -lnsslb8 -lnoname8 -lntcp8 \
-lntcps8 -lnsslb8 -lntcp8 -lntns8 -ln8 -lnl8 -lnro8 -lnbeq8 -lnhost8 -lnus8 \
-lnldap8 -lldapclnt8 -lnsslb8 -lnoname8 -lntcp8 -lntcps8 -lnsslb8 \
-lntcp8 -lntns8 -ln8 -lnl8 -lclient8 -lvsn8 -lcommon8 -lgeneric8 \
-lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lnbeq8 -lnhost8 -lnus8 -lnldap8 \
-lldapclnt8 -lnsslb8 -lnoname8 -lntcp8 -lntcps8 -lnsslb8 -lntcp8 \
-lntns8 -ln8 -lnl8 -lnro8 -lnbeq8 -lnhost8 -lnus8 -lnldap8 -lldapclnt8 \
-lnsslb8 -lnoname8 -lntcp8 -lntcps8 -lnsslb8 -lntcp8 -lntns8 -ln8 \
-lnl8 -lclient8 -lvsn8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 \
-lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lcommon8 -lgeneric8 -lnls8 \
-lcore8 -lnls8 -lcore8 -lnls8 -lnsl -lsocket -lgen -ldl -lsched \
-lc -laio -lposix4 -lkstat -lm -lthread -lwtc8
LIBS=$(ORACLE_HOME)/rdbms/lib/defopt.o $(ORACLE_HOME)/lib/sscoreed.o $(ORACLE_HOME)/lib/libclntsh.so $(ORACLE_HOME)/lib/nautab.o $(ORACLE_HOME)/lib/naeet.o $(ORACLE_HOME)/lib/naect.o $(ORACLE_HOME)/lib/naedhs.o $(ORALIBS)
##LIBS=$(ORACLE_HOME)/rdbms/lib/defopt.o $(ORACLE_HOME)/lib/sscoreed.o $(ORACLE_HOME)/lib/nautab.o $(ORACLE_HOME)/lib/naeet.o $(ORACLE_HOME)/lib/naect.o $(ORACLE_HOME)/lib/naedhs.o $(ORALIBS)
###LIBS=$(ORACLE_HOME)/rdbms/lib/ssdbaed.o $(ORACLE_HOME)/lib/nautab.o $(ORACLE_HOME)/lib/naeet.o $(ORACLE_HOME)/lib/naect.o $(ORACLE_HOME)/lib/naedhs.o $(ORALIBS)
ORALIBSO=-lnetv2 -lnttcp -lnetwork -lncr -lclient8 -lvsn -lcommon8 -lgeneric8 \
-lmm -lnlsrtl3 -lcore8 -lnlsrtl3 -lcore8 -lnlsrtl3 -lnetv2 -lnttcp \
-lnetwork -lncr -lclient8 -lvsn -lcommon8 -lgeneric8 -lepc -lnlsrtl3 \
-lcore8 -lnlsrtl3 -lcore8 -lnlsrtl3 -lclient8 -lvsn -lcommon8 -lgeneric8 \
-lnlsrtl3 -lcore8 -lnlsrtl3 -lcore8 -lnlsrtl3 -lnsl -lm -ldl -lm \
-ldl -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr \
-lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr \
-lnetv2 -lnttcp -lnetwork -lncr -lsql
###-lnbeq8 -lnhost8 -lnus8 -lnldap8 -lldapclnt8 -lnsslb8 -lnoss8 -lnoname8 -lntcp8 \
#ORALIBS=-lnetv2 -lnttcp -lnetwork -lncr -lclient8 -lvsn -lcommon8 -lgeneric8 \
# -lmm -lcore8 -lnlsrtl3 -lepc -lnsl -lm -ldl
CPPOBJECTS=orabase.o orastmt.o
HEADER=orabase.h orastmt.h
.SUFFIXES: .cc .c
###.c.o:
###     $(CC) $(CCFLAGS) $(INCDIR) -o $@ -c $<
.cc.o:
     $(CPP) $(CPPFLAGS) $(INCDIR) -o $@ -c $<
#lib: $(CPPOBJECTS) $(HEADERS)
#     $(CPP) $(CPPFLAGS) $(SOFLAGS) $(LIBPATH) -o $(LIBNAME)$(SOEXT) $(CPPOBJECTS) $(LIBS)
#clean:
#     $(RM) *.o core *~
#distclean: clean
#     $(RM) $(LIBNAME)$(SOEXT) so_locations
###ocimanager:     ocimanager.o
###     $(CC) -o $@ $(LIBPATH) $(LIBS) $<
ocimanager.so: ../obj/ocimanager.o
     $(CC) $(LIBPATH) -o ocimanager.so -G ../obj/ocimanager.o $(LIBS)
##     gcc -L$(ORACLE_HOME)/lib/ -L$(ORACLE_HOME)/rdbms/lib/ -o ocimanager.so -G ../obj/ocimanager.o $(LIBS)
../obj/ocimanager.o: ocimanager.c ocimanager.h
     $(CC) $(CCFLAGS) $(INCDIR) -o ../obj/ocimanager.o -c ocimanager.c
**************** Makefile ends here*********************************************
Hope this helps
Brunda

ProC app. compiling and link problem

Created a Pro*C application called "sample1.pc". Compiled to a get object file ("sample1.o"). Created a library using this object file as follows:
ar -v -q libshr.a sample1.o
Wrote a main.c application making a call to one of the extern functions which accesses Oracle through Pro*C calls.
When I compile and link to my library, I get the following error.
Undefined first referenced
symbol in file
sqlcxt /export/home/mydir/temp/libshr.a(sample1.o
sqlorat /export/home/mydir/temp/libshr.a(sample1.o
ld: fatal: Symbol referencing errors. No output written to t
Following is the cc command given to compile and link:
cc -o t artest.c -I/export/home/mydir/temp /opt/uxbox/oracle/product/7.3.3.3/lib/libserver.a -lm -lthread -L/export/home/mydir/temp lshr
Would like to know what needs to be done to successfully call my proC function from "main.c".
Thanks in advance,
-NM

Try including libsql.a which compiling..
Venkat

Compiling and linking Pro*c

Hi All.
i want to know the complete process os compiling and linking Pro*c programs.
Q:1. Do i need to install visual studio?
Q:2. If yes, please tell me complete procedure for setting environment variables and usage.
Q:3. If visual studio is not required, how can i compile and link Pro*c programs.
i heard that we can compile and link using COMPLINK.BAT
if yes, how to set the complink.bat into execution(ie any paths need to be modified in .bat file)
need help urgent.
thanx in advance

Q:1. Do i need to install visual studio? -
Yes you need this
Q:2. If yes, please tell me complete procedure for setting environment variables and usage.:
Refer V.Studio installation manual and PROC++ Programmers Guide.
Q:3. If visual studio is not required, how can i compile and link Pro*c programs.
Yes you need this

Runtime error after compiling and linking functions containing XDK calls

We have a preexisting application in C distributed across multiple shared objects - on HPUX.
$ORACLE_HOME/xdk/include was included in the include path and the programs were compiled. Linking also was successful.
However at runtime we get errors of the form:
/usr/lib/dld.sl: Unresolved symbol: XmlCreate__FP6xmlerrPUce (code) from ./lib_my_so_name.so
Clearly it's not able to locate the shared libraries corresponding to the xdk since XmlCreate() is not getting resolved.
Where would these libraries be, what are their names on HPUX, and are they installed by default? If not is the installation procedure documented anywhere.
We'll need this information for both HPUX and AIX.

* Don't post that much code. There should never be a reason to. You should be able to break your code down into small enough pieces that you can post a small example that demonstrates your problem.
* When you do post code, use [code] and [/code] tags to make it readable. You can use the code button on the message entry page.
* The stack trace will tell you which line the NPE occurred on, where it was called from, where that was called from, etc. You can use that to help you find your error. Look at the line it's complaining about. What references are on that line followed by a dot, and what arrays do you try to access the elements of. One of those must be null.
* Now that you know what[b] is null, put in a bunch of print statements to track [b]how it got to be null.

Problem with pro*c compilation and linking

Hi all,
I have a problem running the pro*c program on an windows environment.
I have oracle9i and visual studio .net. Ya kinda strange about the combo, but need to live with it.
I create a .pc file and precompile it using oracle pro*c/c++ precompiler. so now I got the .c file.
I used .net command line to compile this .c file
It gave me the .obj file. Now I am getting a link error. I am not sure how I need to link the linkfile.
Let me know if you have any suggestions.
Thank you,
-Raghu

Make sure you are including the Pro*C library. The platform docs tell you explicitly what the library name is. I think for 9i it is called orasql9.lib.

How to compile and link the LabView program(G) with some function written in C?

Before, some employee in our company developed some program which was written in LabView (G). Now we want to add some new function with has already been done in C++. Can we combine them together? how to do it?

Hi;
To use external code in LabVIEW, you can create a dynamic link library (.dll) that you can call from LabVIEW or a Code Interface Node (CIN). The instructions on how to make any of those are in National Instruments manual Using External Code in LabVIEW, which is included with LabVIEW, or you can download it from NI website.
Also, in the knowledge base there is a "External Code for LabVIEW - CIN / DLL - Starting Point" page.
If, on the contrary, you want to use LabVIEW code on your C application, you can build dll's in LabVIEW. Depending on your version of LabVIEW, you may need Application Builder to do so.
Of course, you can also use other techniques like, for example, making that your LabVIEW application save the data in a file and then your C++ application read the file and continues from there, or vice versa. You can also use the "System Exec.vi" in LabVIEw to do that, assuming your C code is an executable.
Regards;
Enrique
www.vartortech.com

Sorting songs in Compilations and the original albums without multiples

I have a number of compilations as well as many, many albums in my Library. Is there a way to easily sort them in to, possibly, multiple compilations and let them remain in their original album as well?
It's hard to believe that I'm the first one to ask this but I can't find it in a search. Thanks a bunch.

If I understand correctly, you have two copies of Song A; in the original album and in a compilation album (like a movie soundtrack). You want to have one copy of the song connected to both albums.
I would make one of the albums, probably the compilation, a playlist. Then you could delete the duplicates of the song. Instead of playing the compilation album directly from your music folder you'd have to use the playlist.
Its not exactly what you want to do, but I don't think its possible to do what you would like to do. I'd love to be proved wrong though.
Message was edited by: HMSHyperbole

I can sign into iCloud but can't remember the answers to my security questions and the link for a password reset it my old work email and I don't work there any more and don't want to contact them!! Help.

Want to change me password for my Apple ID on I cloud. I am doing this on my Mac but going into I cloud on Safari. I can sign in ok, but when I go to password change, it wants me to answer 2 security questions, I don't know the answers to these. Then it says if I don't know the answers, it will send me a link to and email address. The email address they want to send the link to is my old work email and I don't want them to send an email there and I don't want to have to contact my old place of work. Help please!!!

in that case you need the help of Apple Support.- only they will be able to help you. See this webpage on how to contact Apple Support in your country: There are either telephone umbers given or an email form:
Apple ID: Contacting Apple for help with Apple ID account security
Explain, that you need help with an account security problem.
You can also try to email the iTunes Support using this form: https://ssl.apple.com/emea/support/itunes/contact.html

The computer I use at work is a PC. I know you are allowed to install the programs on two computers, one work computer and one laptop. My laptop is a Mac. Is it possible to install the second copy on a Mac?

I'm not sure if I'm in the right forum for this question, but I don't know where else to ask about installing on cross platforms. So, the computer I use at work is a PC. I know you are allowed to install the programs on two computers, one work computer and one laptop. My laptop is a Mac. Is it possible to install the second copy on a Mac?

Which Adobe product exactly?
Cloud: yes.
Creative Suite: no.

Translation from CS5 to Cloud doesn't work correct, navi and linked images are broken.

Translation from CS5 to Cloud doesn't work correct, <navi> and linked images are broken.
The data of CS5 was created at another PC. I installed Cloud version into two different PC. One has had the site data since dreamweaver CS5 and it works correct in Cloud version. Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.

Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.
This implies your site is not properly defined in DW. Go to Site > Manage Sites.
Or simply go to your other installation of DW and export the site definition file from Manage Sites.
Save it to a flash stick or other removable drive. Then import the STE file into your 2nd installation of DW.
Nancy O.

Is it possible work (compile and link wi

Similar Messages

Maybe you are looking for