Is it possilble to have Ethernet connection automatically turn off airport
I would like to have airport turn off when I connect an Ethernet cable. Is this possible and if so how would I accomplish it?
No, but you can change the order, such as when ethernet is plugged in, it will use that for your internet connection over the wireless.
You can change this in your network settings.
Similar Messages
-
Connection automatically turns off and wont turn on.
I have a blackberry pearl 8130, and a couple of days ago the connection started to turn off and stay off. When I go to manage connections and turn on te mobile network .. it lasts for about 30 seconds and than turns right off again.
Hi and Welcome to the Forums!
Is the battery fully charged? Typically, a BB will begin to shut things down as the battery approaches zero charge.
Also:
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Best!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
i am using iphone 4s its under warranty , phone got automatically turn off even if has 50% battery and not get on until i connect to charger . if i go to service center will they change my phone ? and will i have to pay anything if its battery issue ???/
Take it in and see what the technicians say is wrong and then how they want to handle the iPhone. If the iPhone has a problem covered by the warranty then you should have no problems.
-
hi i have i phone 4s and ios 7.0.2 is updated and problem is wifi and last 3 days i have problem about wifi and im connected wifi and its automatic turn off and then on ...... will you help me
Apple guys are deleting posts. I have found my posts have been deleted. Apple should MUST let us downgrade at least to previous release from current which was working fine.
-
Dear Apple,
I am using an iPhone 5. It automatic turn off after that I press power on iphone but it don't turn on power.
Please help me. Thank you so much.
<Personal Information Removed by Host>Try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. You may need to connect the device to the charger before you attempt the reset.
-
restored iphone from icloud so I could have all my old photos but now I cannot get it to restore or sync with itunes either by cable or by wifi. I have tried with automatic download off/on, I have had red circles, hours of syncing, nothing, help!!
Seems to be a common issue in discussions. Try this:
http://support.apple.com/kb/ts1538
And let me know if it helps, -
I am working with Georgia DOT and we have created an app to track our state vehicles using IPhone 5. My question is: will an iPhone automatically turn off location services? If it goes below a certain battery power level, and if so how do you disable this in settings.
Message was edited by: mickyelI don't believe that this will happen, however, the entire iPhone will shut down when the iPhone reaches the auto-shutdown power level. There is no way to turn that Off other that connecting the iPhone to power.
-
My 6th generation iPod nano automatically turns off (=stops the music) when I push het sleep/wake button or when screen turns black for power saving mode. Does anyone know how to solve this ?
I have already tried resetting, connecting to PC/iTunes to check the software version, turning off/on, I don't have any inspiration anymore.
Thanks for your suggestions!Hi VeerleD,
If your iPod touch unexpectedly powers off, you may want to use the steps in this article to troubleshoot -
iPhone: Hardware troubleshooting (The steps apply for the iPod touch) -
Specifically -
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for using Apple Support Communities.
Best,
Brett L -
Ipod touch won't and never did connect. Turned off security to router. Went through troubleshooting list. Circle lines seem as if trying to connect. IP adress is obtained. Never does connect in a usable way??????????????????????????????????????????????
Does the ext directory have the php_oci8.dll? In the original steps the PHP dir is renamed. In the given php.in the extension_dir looks like it has been updated correctly. Since PHP distributes php_oci8.dll by default I reckon there would be a very good chance that the problem was somewhere else. Since this is an old thread I don't think we'll get much value from speculation.
-- cj -
Iphone6 plus automatically turn off (frequently)and cannot use WIFI
Just bought Iphone6 Plus 16GB Gold on 15 Dec 2014 from The Australian official Apple website.
In this week, my phone turn it off automatically (very frequent, it seems like if i not use my phone, it will shut down)
and cannot normally turn on the phone, i can only turn it on through HOME BUTTON + TURN ON/OFF BUTTON.
And after i turn on the phone, the WIFI button become GREY COLOR, which means i cannot use WIFI, cannot turn on/off.
And i try to restore setting from the phone and also from iTunes through computer, it doesn't help.
Does anybody know what happen to my phone?hi，
so can I ask how do you solve this problem？
在 2015年1月10日，08:39，Apple Support Communities Updates <[email protected]> 写道：
You received a reply
coolbeanz has replied to your question. You can view the full discussion in Apple Support Communities.
Iphone6 plus automatically turn off (frequently)and cannot use WIFI
I have this same problem, but with an iPhone 6, 16GB Gold
Correct Answer Helpful Answer
Use the buttons above to tell coolbeanz and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
To reply to coolbeanz, go to the discussion in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Terms of Use | Apple Support -
Wifi automatically turned off when phone sleeps in iOS 5.1.1?
Before, I used iOS 5.0.1 and wifi would keep turned on when the phone sleeps if I turn off data. This way I could always receive instant notifications. But then I sold the verizon phone and bought a used FU one, installed with iOS 5.1.1. Now wifi is automatically turned off when phone the sleeps, even when data is off. Is this how it works? Because I want to use wifi, even when the phone is off. Thanks.
I have had and iphone 4 for the last couple of years with all the different IOS upgrades and never experienced such a thing!? I do not have a cell data plan (I even have it switched of in settings) so I rely on wifi and, even when the phone was in standby, the wifi was constantly on! and I received e-mails and skype calls as they arrived, So wifi was certainly ON!
However, since the last upgrade to IOS 6.0 the wifi is indeed being turned off when the phone goes to sleep mode, which is very annoying!
Any fix/workaround?
Thanks -
My HP G56 laptop , when turn on automatically turns off
Hello !! I have a laptop HP G56 . I have tries many ways from Youtube , Google , hp support . And I had a hard reset too but its still the same . I dont know what to do ? How to do ?
When I turns on my laptop it is going on but after HP logo is shown then it automatically turns off . Please Help me !! Please!!!!I strongly recommend you to contact HP Technical Support over the Phone and request for Recovery Disks for your
Notebook
Commercial Notebook Support - 1800 334 5144 [Say Business Notebook in IVR and wait for the engineer]
Consumer Notebook Support - 1800 474 6836 [Say Get Tech Support and wait for the engineer]
Hope this helps, for any further queries reply to the post and feel free to join us again
"I work for Hewlett-Packard"
* * * * * Click the "Purple Thumbs Up Icon in the lower right corner of a post" to say thanks * * * * *
* * * * * Please mark Accept As Solution if it solves your problem * * * * *
Regards,
K N R K -
ICloud keychain automatically turn off
Hi,
I don't know why my iCloud keychain feature always automatically turn off after several weeks.
I turn it on many times, it works properly. However after around 3 weeks, I go to Setting -> iCloud, and Keychain is always off.
I turn it on again successfully but later it is automatically turned off.
I happen to me like 4 times.
This issue only happen after I upgrade to iOS 8. When I use iOS 7, this doesn't happen.
So, is there anyone encounter the same issue like me? If you have solution, please give me advice.
Thanks
KhuongMine turns off after a few hours, I've tried resetting iCloud keychain, turning off everywhere and re-enabling but on my iPhone 4s is wont stay on. I've raised a bug with Apple and waiting to see if it gets closed as a duplicate.
-
2013 MBP 2.5 i5 4Gig 500MBHDD boots slow. It finishes post in the same time as an identical MBP, and then hangs for 30 seconds on one of the ethernet adapters, before finishing the boot. Once booted it is normal. Turning off airport changes nothing. Hardline adapter is not plugged in. Thunderbolt adapter is not used. Bluetooth is off. Did this out of box. Identical MBP boots to login screen in 36 seconds. Disk repair, permission repair, and safe mode boot have
already been done, no change. Boot time is consistent. Hangs at the same place each time. Right after post. Bad adapter?
Comments, solutions please.... and so ... now a few days later, success. I ran
your software but it told me nothing I hadn 't seen
in verbose boot.
Consistently, following good post, the boot hung
for 30 seconds on the adapters, (cards, chips, NICs.
Ethernet cards, whatever you prefer to call them)
either the airport card or the hard line. It would then
proceed at normal pace to the login screen.
Since it came out of the box that way, software
conflict was not a go. I guessed glitched driver or
fetch instruction. I zapped the PRAM (cleared
NVRAM) and reloaded the OS, updates, Garage Band,
iPhoto (one of Apple's true dogs in an otherwise
rare arena) iMovie, Photoshop, Lightroom, their
updates, and my files. MBP pro now boots to login
in 31 seconds. Note I have turned off as much gee
whiz, rubber band scroll, global swiping and other
hubcaps and hood ornaments as befits how like
things ... and turned off all the Asian and other fonts
I will. ever use.
Best guess ... corrupt driver or corrupt fetch script ...
bad server squirt at factory load.
Thanks for your help, Cheers! -
My MBP automatically turns off
I've just got a new battery but when i was using my MBP with battery power, it automatically turns off without any caution. Here is my battery info:
Model Information:
Serial Number: 6N91208UL2VL
Manufacturer: SMP
Device Name: bq20z95
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 002a
Hardware Revision: 000a
Cell Revision: 100
Charge Information:
Charge Remaining (mAh): 3399
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 4463
Health Information:
Cycle Count: 0
Condition: Normal
Battery Installed: Yes
Amperage (mA): 644
Voltage (mV): 12285
Is it normal?Hi,
I have the same problem with my MacBook Air, and with the same battery "SMP bq20z95", how do you resolve it?
Maybe you are looking for
-
My pc crashed, how do i get the music from ipod
My laptop crashed and had to be re-built but I lost everything that was stored on itunes. How do I transfer it from my ipod back to the laptop and the itunes library?
-
Can you use facetime on macbook
How can i get a facetime application with macbook?
-
ExistsNode exception with Schema based XMLType table
hi, While running this query on structured table --> SELECT OBJECT_VALUE FROM Table_Structured WHERE existsNode(OBJECT_VALUE, '/Entity/Fields[field2="stringvalue"]') = 1; I get this exception --> Error report: SQL Error: ORA-00932: inconsistent datat
-
The issue is we have created a BPEL with the WSDL and JCA generated from the Oracle studio and deployed the BPEL in SOA Server. When testing in Oracle Studio the output has 26 XML elements; when testing with Weblogic through BPEL, it is returning the
-
JavaMail doesn't send Bcc + Content-Length
Hello Folks, I recently found a String ignoreList in the class SMTPTransport which contains already "Bcc" and "contentLength": /* 141 */ private static final String[] ignoreList = { "Bcc", "Content-Length" }; Thus I wanted to know whether sending