Is it really unnecessary to use ipodmini with winxp sp2?

I got an ipod mini recently,and just found it needs winxp sp2, but mine is sp1.I asked some guys, they said it's unnecessary with sp2. Is it ture?

SP2 is pretty important from a Windows perspective but it will work with either. Get SP2 as fast as you can though.

Similar Messages

EAP/TLS , PEAP problem on PORTEGE with WinXP sp2 Tablet ed.

We have: ap Cisco AiroNet350 with WPA-EAP, Freeradius with configured EAP/TLS and PEAP, tablet PC PORTEGE with WinXP sp2.
This problem discribed at http://wiki.freeradius.org/index.php/FAQ#PEAP_Doesn.27t_Work
Maybe to solve this problem we need a fix ( http://support.microsoft.com/kb/885453/en-us ), but microsoft support tells to contact with notebook manufacturer.
Can anybody help me with this problem?

Hmmm Im not expert on this field but it seems that the MS OS update is need. (I hope)
The preinstalled Windows OS is a simply OEM version and usually every updates should be possible. However, if the MS guys told you to contact the notebook manufacture so you can contact the Toshiba authorized service provider in your country for more details.
But I have investigated a little bit in the net and found this useful site:
http://searchnetworking.techtarget.com/originalContent/0,289142,sid7_gci945257,00.html
1. 802.1X depends on communication between your wireless router and a RADIUS authentication server. Whether you're using WPA2, WPA, or WEP with dynamic keys, the following 802.1X debugging hints can be helpful:
a. Re-enter the same RADIUS secret into your wireless router and RADIUS server.
b. Configure your RADIUS server to accept RADIUS request from your router's IP address.
c. Use ping to verify router-to-server reachability.
d. Watch LAN packet counts to verify that RADIUS requests and responses are flowing.
e. Use an Ethernet analyzer like Ethereal to watch RADIUS success/failure messages.
f. For XP SP2, turn on Wzctrace.log by entering "netsh ras set tracing * enabled"
2. If RADIUS is flowing but access requests are being rejected, you may have an 802.1X Extensible Authentication Protocol (EAP) mismatch or credential problem. Fixing this depends on EAP Type. For example, if your RADIUS server requires EAP-TLS, then select "Smart Card or other Certificate" on your wireless adapter's Network Properties / Authentication panel. If your RADIUS server requires PEAP, then select "Protected EAP" for the adapter. If your RADIUS server requires EAP-TTLS, then you'll need a third-party wireless client like AEGIS or Odyssey.
Make sure that EAP-specific properties match for your adapter and server, including server certificate Trusted Root Authority, server domain name (optional but must match when specified), and client authentication method (e.g., EAP-MSCHAPv2, EAP-GTC). When using PEAP, use the CHAP "Configure" panel to prevent Windows from automatically re-using your logon.

I REALLY need to use MB with lid closed...

Sleepless doesn't work after the upgrade, does anyone know of ANYTHING that will work right with this new update? I'm not using external keyboard/mouse btw.. thanks!!

Are you trying this when the Mac is in motion, i.e., in your backpack? If you move the machine much when it is awake, you risk killing your harddrive. If you are trying this with the Macbook on a desk, just leave it open.
Leaving laptops (eps. Macs) on and closed keeps heat from espcaping the way it is supposed to, possibly damaging your system. Apple designed their machines to sleep when shut for a reason.
Just go buy a Nano.
iSMH

Java Plug-in not working with WinXP SP2 Registry Key Missing Error Pop-Up

I have WinXp PRO with SP2 and the Oct 12 Security Update Patch for SP2 loaded and I went to my Control Panel and saw that the JavaRuntime Environment 1.4.2_04 icon was missing and when I went to click the Java Plugin icon to Open it, I got the following message in a Error Pop-Up window:
The system cannot find the registry key specified:
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java pPlug-in\1.4.2_04\JavaHome
I then went to Chage Access Program Controls and when I clicked on the Change box for the program, it wanted me to re-install the whole environment.
Prior to doing this, and potentially screwing up my MS winXp environment, I went to the Sun support page for Java Plug-in and I did get the dancing elmo appear as they said I would but I noticed that my environment was MS VM, not Java and that I was out of date and a newer update was avaliable.
The downloads page for the plug-in states clearly that it supports WinXp SP1 and NOT SP2.
SO, my question is, do I need to re-install anything or wait till the whole SP2 issue and java with (BITS) issue gets resolved and just use the MS VM engine during my browsing time? Is there a workaround and what impact will this have on my system? I am not developing Java Apps but am a Power user in Windows who is wondering if applets and general browsing might be easier, faster and more fluid if the Java Runtime was enabled as opposed to the MS VM solution?
Any ideas or thoughts on this very timely issue would be greatly appreciated as I see others have tried to post related issues but none that succinctly combines what I have asked for here in this post.
Thanks from NYC -Phil

did you know that XP SP2 has so many technical problems? try SP1 or contact the WindowsXP Vendor

MSI K8N neo4 platinum chipset drivers issue with winxp sp2

Here is my previous post. I am just wondering if there may be any issues if I do not install Nvidia crap.All I have right now is the graphics driver from nvidia, rest are from microsoft.

Hello !!
Download and install the drivers you will find here:
http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=637&kind=1
Good Luck
Greetz MurdoK

MS5169 with WinXP

Do you know if this motherboard works with WinXP SP2?
Thanks For all
Vito

System Requirements for Windows XP Service Pack 2
Published: August 20, 2004
To install the service pack, your computer must have a CD-ROM drive or Internet connection and meet the following minimum requirements:
• 233 megahertz (MHz) processor
• 64 megabytes (MB) of RAM
• 1.8 GB of available hard disk space during installation
To determine whether your computer meets these requirements:
• Click Start, right-click My Computer and then click Properties. On the General tab, under Computer, you will see your computer's processor speed and RAM listed.
Note: If you want to download and install Service Pack 2, but you are not using Internet Explorer, please visit the Download Center.
Top of page
Which versions of Windows you can update with SP2
If you are running one of the following versions of Windows, you can update it with Service Pack 2:
• Microsoft Windows XP Home Edition
• Microsoft Windows XP Professional
• Microsoft Windows XP Media Center Edition and Microsoft Windows XP Media Center Edition 2004.
(If you install Service Pack 2 onto a computer running Windows XP Media Center Edition, your operating system is upgraded to Windows XP Media Center Edition 2004.)
• Microsoft Windows XP Tablet PC Edition
(If you install Service Pack 2 onto a computer running Windows XP Tablet PC Edition, your operating system is upgraded to Windows XP Tablet PC Edition 2005. After you install Service Pack 2 and restart your computer, the Welcome to Tablet PC window opens. It provides links to information about the new operating system, including tutorials.)
To find out which version of Windows your computer is running, click Start, right-click My Computer and then click Properties. On the General tab, under System, the Windows product and version number are listed.
You cannot use Windows XP SP2 to update the following operating systems:
• Microsoft Windows Millennium Edition or other earlier Windows operating systems
• Microsoft Windows XP 64-Bit Edition Version 2003
• Microsoft Windows XP 64-Bit Edition
Top of page
What to expect
Due to the number and type of security features it delivers, Windows XP SP2 is a significant update. Here are a few tips about the time and computer memory required to install Service Pack 2, what you'll see as you install it, and what might change after you install the service pack:
• Hard disk space: You need at least 1.8 gigabytes (GB) of free space on your hard disk.
To check your free disk space, click Start, click My Computer, and right-click Local Disk (C:) or the name of the drive you're installing Service Pack 2 on, and then click Properties.
• Time: The time it takes to download and install Service Pack 2 depends on many factors, but especially on the following:
• Whether your computer meets the Windows XP SP2 system requirements.
• Whether you have completed the recommended steps below before you download SP2.
• The speed of your Internet connection. Downloading SP2 is recommended for high-speed and broadband Internet connections. If you use a slow connection, it's a good idea to turn on Automatic Updates. That way SP2 will download in the background while you're connected to the Internet.
No matter how long it takes, it's a good idea to stay at your computer throughout the installation process in case you need to enter any information or respond to the Installation Wizard.
Hope this helps!

IPod and iTunes not compatible with WinXP

It appears that the iPod (I have a 4GB nano) and iTunes (I tried what was on the CD, as well as the latest download of 6) are not compatible with Windows XP Media Center Edition (patched to the hilt, all the latest updates installed).
Installation works fine but iPod updater does not terminate cleanly and the iPod nano does not get rebooted properly, and although iTunes sees the iPod when it is plugged in, it does not recognize it from plug-in to plug-in (it's supposed to remember the name of the iPod device, and not re-prompt you to register, etc.).
Also, when attempting to copy MP3 files to the iPod, it appears as though they are copying but they do not wind up on the iPod no matter how hard you try.
Windows 2000 SP4, however, does not have any problems with the iTunes or iPod updater software and everything seems to work just fine.
It would behoove Apple to investigate the compatibility problem that their software has with Windows XP Media Center Edition, and fix it as soon as possible.

When i startup itunes it says:
"The software required for communicating with the ipod is not installed correctly. Please reinstall itunes to install the Ipod's software"
I am on xp media center edition 2005
When I run the ipod updater it gives me "ipod service error"
What can i do?
I bought the 4gb nano just yesterday.
both my ipod and itunes software are the Updated September 23, 2005 versions
ps on my old pc with winxp sp2 barebones edition, it works fine...
maybe its cos in mce 2k5 i got 2 users?

My iPhone 5 gets really hot while using it.. its only my 2nd day with it is this normal?

My iPhone 5 gets really hot while using it.. its only my 2nd day with it is this normal?

I had same issue, apple give me a new phone, they say it might be software problem, but the 2nd phone has fast drain too, I took it to apple , they restored my phone as new, and iCloud backed up my contact. I thought about the whole thing, I used to sync it to my window, but this time I synced it with my Mac. 87% at 3:30pm. I think that window has bugs. It is not my iPhone 5's problem. After all those stressful days.

Using Excel with Visual C++ 6.0 (need a graph control that behaves as much like the one in CVI as possible)

I hate to beat this to death but I was unable to find a
clear answer to this question. Does NI provide Excel control from within
Visual C++ 6.0?
I read that NI supports the ANSI-C library only for Visual C++ 6.0 users:
Thread : "Re: Benifits of using measurment
studio for VC++ 6.0?"
NI REP : drohacek
Quote : "we made the decision to support Visual
C++ 6.0 users only through the ANSI-C interface and not through the Measurement
Studio MFC-based class libraries."
If there is a suggested way of controlling Excel from within Measurement Studio
for Visual C++ 6.0 then I’d love to know it.
If not, can a plain statement be made basically stating that if you want
to control Excel you can’t use a Visual C++ 6.0 environment even with Measurement
Studio support?
With .NET of course you can just decide to have Excel support added during
project creation. CVI can act as an ActiveX server and easily control
Excel just by building off the examples shipped with CVI. I see that
there is support, using the Measurement Studio for Visual C++ 6.0 Project Wizard,
for taking existing CVI projects and converting them to Visual C++ 6.0 projects
or for calling CVI libraries from a .dll from within Visual C++ 6.0. I suppose I could do the work
in CVI and then convert the project but I'm so deeply tied into all my MFC calls that I don't see
how I can cleanly include the CVI libraries into my existing VC++ 6.0 projects.
What I'm really after here is a visual graph control like the one in CVI that I
can use from Visual C++ 6.0. I purchased a 3rd party graph control for use
in VC++ 6.0 that works well but isn't really visual. I mean you can't
enter any values in it until you run the program and fill it out programmatically.
Then you can see which columns are two narrow, quit the program, adjust the
column width of your now empty control, and repeat, until you get the thing
looking the way you want. If I could call into Excel from within Visual
C++ 6.0 the way I do from within .NET
then I could use Excel to hold the table and just read in the values into my table
control at run time. Basically I'd use Excel as a visual development tool
for all my tables.
I do all my coding from within CVI and Measurement Studio for Visual C++
6.0. I'd use CVI for everything if I didn't depend so heavily on certain
outside controlled C++ .dll's. Could you please suggest then what I can
do to get Excel support for Visual C++ 6.0?
Last question :
Is there any plan to ever have a NI table control like the CVI table control for
use in Visual Studio? One that you can
completely set up before you do any compiling?
I imagine that the way Microsoft sets up their environment makes this idea impossible. Otherwise someone would
have come up with a truly “visual” table control before now.
Thanks,
Grant
Grant M. Johnson
Project Engineer
LECO Corporation

Hello Grant
You can most certainly use Excel with VC++ 6.0. Measurement Studio won't provided you with any classes to talk to Excel in VC++ 6.0. This is because Excel allows control via Automation and you can use its automation API to do anything you need with Excel. This is what CVI uses as well.
You can see this MSDN article on how to set this up. This mentions VC.NET, but it should work the same way.
Here is one that talks about VC 6.0 and Excel.
Here is a code project article about this.
Even with .NET, you have to do thru the Excel Automation support. Excel started shipping with Primary Interop Assemblies (PIA) which are .NET wrappers about the Excel Automation object model. C++ Automation is definetely not as nice as .NET, BTW
See this document for more information about the Excel object model.
I would not recommend using the CVI Excel libraries if all you want to use them for is Excel automation. You will end up creating un-necessary dependencies and go through extra layers that way. You can make calls straight to Excel from VC++ without requiring CVI.
One quick observation about your excel approach. If you decide to use Excel as your table, you might be requiring everyone who uses your application to have Excel installed on their machines. Just wanted to make sure this was acceptable to you.
Have you looked at the Datagrid Activex control, which is one of the common controls that ships with Visual Studio? You can add it to Visual Studio by right-clicking and picking it from the list of installed activex control. If you have not already, you should check it out.
Microsoft has made significant improvements in the number of controls they provide with .NET. They have a Datagrid control that seems to be what you need.
Measurement Studio did add some high level classes for Excel and Word Automation that simplify some common tasks, but these exists for VS 2003 C++ and VS 2005 C++, not for VC 6.0. Underneath, we end up using the same Excel automation classes, so you can easily setup something similar for VC 6.0. Plus you can find alot of references online on how to use the Excel Automation object model with C++.
We currently have no plans in Measurement Studio to create a table control unfortunately. I am assuming when you said graph, you actually meant table, since Measurement Studio already provides a ActiveX graph controls for VC++ 6.0 that is very similar to the CVI graph.
On a side note, VC++ 6.0 is really really old. Have you considered upgrading?
To summarize
- Yes, you can use Excel with Vc++ 6.0 without mstudio.
- Try using the Datagrid Activex control if you just need a table.
- Measurement Studio provides high-level excel and word classes for VC++ 6.0
- Measurement Studio provides a graph control for VC++ 6.0 which is very similar to the CVI graph.
- Measuremnt Studio does not have a table control.
- VC++ 6.0 is really really old. Have you considered upgrading?
Bilal Durrani
NI

How can I use LCCS with ActionScript 3 and Flash CS4?

Hi,
Using Stratus I was able to create an an application using Action Script 3 and Flash CS4. The sample code on the Adobe site was quite straight forward and easy to understand. I now want to switch over to LCCS but can't find anything any where on how to use Action Script 3 and Flash CS4 with LCCS. Do I need to know Flex to be able to use LCCS? Everything was quite simple and easy to understand with Stratus and makes complete sense. But LCCS is really confusing. Is there any sample code on how to establish a connection in Action Script 3 and then stream from a webcam to a client. There is nothing in the LCCS SDK that covers Flash and Action Script 3. Please help! I found the link below on some forum but it takes me nowhere.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=75 9&threadid=1407833&enterthread=y

Thanks Arun!
Date: Thu, 29 Apr 2010 11:44:10 -0600
From: [email protected]
To: [email protected]
Subject: How can I use LCCS with ActionScript 3 and Flash CS4?
Hi,
Welcome to the LCCS world.
Please refer to the SDK's sampleApps folder. There would be an app called FlashUserList. The app demonstrates how LCCS can be used with Flash CS4. Its a pretty basic app, but should help you moving.
We are trying to improve our efforts to help developers in understanding our samples. Please do let us know if we can add something that would help others.
Thanks
Arun
>

How to use BC4J with JDeveloper 9i in a Team

Hello
I'm not sure if I'm to stupid, but to say the truth I didn't found the clue how to share a BC4J Application between several develeopers. Maybe someone can give me a hint.
That's my situation:
Our team is going to develop a web application using BC4J and BC4J-JSP, nothing special I think.
But my problem is, that BC4J and especially the wizards refer to a lot of different files. Even simple changes often result in multiple files being changed in different parts of the project.
Creating a view link between view objects in two packages for example changes the view objects in both packages. Also the project (.jpr) file or several "BC4J.xcfg" files are changed very often.
So it is not easy to find parts of code from which I can say they are owned by one developer and others which are owned by another. Most often, if you have to merge the work of different developers, you have to edit the BC4J-XML-Files using an external editor. Or did someone find a better way? Please tell me!
So, what is the best way to share code between developers?
Should I partition the application by packages?
- advantage:
it allows a fine partitioning
- disadvantages:
it has the great danger that BC4J makes changes in other packages which will be overseen when merging.
Should I create a projects for each developer and distribute code between the projects using libraries?
- advantage: no unseen changes will happen, as the libraries are readonly.
- disadvantages: no view links between view objects in different projects (Libraries) are possible! Also a lot of "load errors" can occure when updating a library, which have to be manually corrected in the dependent projects.
Are source code management systems a real help in this problem or do they just "manage" the problem? I already tried SCM and PVCS but was not very happy with the way of working. As JDeveloper is not "really easy" to use with theese tools.
So I would like to get any hints how other developers are dealing with this problem. Are you using BC4J with JDeveloper 9i in a team? Please tell me how do it and how you have partitioned your application.
Thanks in advance
Frank Brandstetter

Hi,
I'm not sure whether my answer is good enough for you, but it might help.
First of all, you have to use JDev 9.0.3, because 9.0.2 has big problems with associations/view links between objects in different projects.
Creating a view link between view objects in two packages for example changes the view objects in both packages. Also the project (.jpr) file or several "BC4J.xcfg" files are changed very often.This is not completely true in 9.0.3, as you may choose not to create an accessor in the imported object (and usually you don't need it neither!). As for bc4j.xcfg, there is a trick: define a "standard" database connection name to use all over your project! This will prevent modifying these files all the time!
Should I create a projects for each developer and distribute code between the projects using libraries?
- advantage: no unseen changes will happen, as the libraries are readonly.
- disadvantages: no view links between view objects in different projects (Libraries) are possible! Also a lot of "load errors" can occure when updating a library, which have to be manually corrected in the dependent projects.I would say, projects for each application component, which by chance will be managed by a single developer at a time.
As for the disadvantages, in 9.0.3 you are able to properly create associations and links using read-only objects. Hopefully, the release version will solve some generation inconsistencies...
Concerning the errors that occur when modifying a library, this might be balanced by the relative independence of the components... If you are able to develop following the dependency tree, you will not meet the problem very often.
Are source code management systems a real help in this problem or do they just "manage" the problem? I already tried SCM and PVCS but was not very happy with the way of working. As JDeveloper is not "really easy" to use with theese tools.Indeed, I do not have a SCMS really able to manage merges in the BC4J XML files... We rather try not to arrive there!
So I would like to get any hints how other developers are dealing with this problem. Are you using BC4J with JDeveloper 9i in a team? Please tell me how do it and how you have partitioned your application.I really hope that my hints will help.
Regards,
Adrian

How to use Terminal with KeySpan USB serial adaptor cable?

I own a KeySpan model USA-19HS to use with our MacBookPro when working on clients networking equipment that require serial communication. I have used ZTerm with excellent luck, but it costs, and is yet another application that I dont really want. I would like to know if any one out there has exacing instructions on how to use Terminal with this adaptor. If I could write a file that had, say, the couple most common settings (9600-8-n-1, 57600-8-n-1, et cetera) that I could simply click on, to open a new Terminal window with those settings, then simply close that, and open a new window (apple+n) in order to get back to a default settings terminal window. All feedback is most appreciated.
Thanks so much, Jason Sjobeck

Hi, Jason. Welcome to the Discussions.
You wrote: "All feedback is most appreciated."OK.
1. Have you considered discussing this with Keyspan Support?
2. Have you read the section "OSX has Terminal.app - why do I need ZTerm?" on the ZTerm Home Page? That seems to explain why one needs an app like ZTerm.
3. A quick search of Keyspan's FAQ for your product and terminal doesn't yield much more than how to find the serial ports using Terminal.
Likewise, this Google search also yields little, and variants of that search of such weren't particularly help either.
It appears your inquiry seems to be a somewhat esoteric topic.
4. Apparently, ZTerm X is a bit long in the tooth and there's no Universal Binary for it. It sounds, however, like you've tried it running on your MBP under Rosetta, yes?
5. In researching alternatives to ZTerm for you, I note the followng:• The comment from "Reverb" on this page suggests C-Kermit or Kermit as a free alternative.
• This tip on Mac OS X Hints cites Minicom as another option.6. You may want to try your question on the Unix Discussion.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

If I buy an unlocked, contract free Iphone 5 in Europe, will I be able to use it with a US carrier?

The topic says all really, Iphone 4s and 5 both have GSM and CDMA capabilities and it's supposed to be a world phone and blah blah, but, if i buy one unlocked 4s or 5 from Europe ( contract free) will I be able to use it with say ATT?
I'm confused about this though:
About the Unlocked iPhone
The unlocked iPhone includes all the features of iPhone but without a contract commitment. You can activate and use it on the supported GSM wireless network of your choice, such as AT&T in the United States. The unlocked iPhone 4 or iPhone 4S will not work with CDMA-based carriers such as Verizon Wireless or Sprint." ( Link http://store.apple.com/us/browse/home/shop_iphone/family/iphone/iphone4s)

AT&T and europe all use GSM . There is no CDMA in Europe
A genuine unlocked iPhone 4/4S from Europe will work fine
A similar unlocked iP5 will work on 3G but NOT on 4G as the
European iP5 does not have the 4G bands suitable for use in US
and the warranty will not be valid in the US it is not international

Mac Mini Wifi went from really bad to impossibly slow with Mavericks

Is there anything I can do? I really need to use WiFi given my location. My Lenovo Laptop gets about 15 MBPS with speedtest.net but my Mac Mini in the exact same location barely gets 1 MBPS and that's after timing out about 3 times. This is completely unusable! HELP!
Note, I am not using anything bluetooth and I have a wireless USB mouse and a cabled USB keyboard. I even turned bluetooth off. THe USB mouse and keyboard I regularly use with my Lenovo and they don't cause it problems.
I use this as a development machine (XCode) for iOS development and do a tiny bit of sound recording with Garage Band, otherwise it gets very little use. I recently upgraded it to Mavericks.
Are there any diagnostics I can use or anything I can do to improve my WiFi?
TIA

Please answer as many of the following questions as you can. You may already have answered some of them; in that case, there's no need to repeat the answers.
Restart your router and your broadband device, if they're separate. Any change?
Run Software Update and install all available updates for OS X or your computer's firmware. Any change?
If possible, connect to your router with an Ethernet cable and turn off Wi-Fi. Any difference?
Are any other devices on the network, and if so, are they the same?
If you can connect to more than one network, are they all the same?
Are all network applications affected, or only some? If only some, which ones?
Is networking always the same, or is the problem intermittent?
Disconnect all other devices from the network. Any change?
Boot in safe mode and test. Any difference?
Boot into Recovery mode. From the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. Any difference?
If possible, turn off Bluetooth and disconnect any USB 3 devices. Any difference?

[Solved] Unable to use ffmpegthumbnailer with videos

Hi,
I'd really like to use the ffmpegthumbnailer with my videos to replace the normal video icons. However neither installing totem or ffmpegthumbnailer works as when I open Gconf and go to 'apps > gnome > thumbnailers' and look for those video@foo keys, there are no keys in them!
Manually creating boolean key 'enable' and string key 'command' - 'ffmpegthumbnailer -i %i -o %o -s %s -f -t 15' won't work as when I click on those keys I created the key infos say "This key has no schema" but the 'command' key also says "This key is not writable" (screenies: http://img193.imageshack.us/img193/3677 … ration.png, http://img39.imageshack.us/img39/3677/s … ration.png).
So any ideas how can I make my video thumbnailers work?
- Thanks
Last edited by algorythm (2009-09-30 12:33:11)

I thought this was already solved and I marked this as [solved] for a sec.
So whatever, I rebuilt thunar, thunar-archive-plugin, thunar-media-tags-plugin, thunar-thumbnailers, ffmpeg-thumbnailer, nautilus, pcmanfm with abs but that only made the video thumbnails to work with Thunar and Nautilus.
Last edited by algorythm (2009-08-21 14:48:47)

Is it really unnecessary to use ipodmini with winxp sp2?

Similar Messages

Maybe you are looking for