Is it recommended that i use an interface for logic 9, if so what brand

waht kind of interface should i get that is relatively cheap and does a good job, is it recommended that even use an interface, i have electric guitars, and a keyboard, and a mic.

If its not an entirely different situation with regard to Logic Pro 8/Logic Pro 9, Apogee makes a few interface options at different price ranges. The Duet is a quality interface as their mid range price option. I have had experience running Logic sessions with the Duet and have had relatively few problems. Also, Apogee typically does a good job integrating their specs/design for Logic users.

Similar Messages

  • On my Macbook pro 15 2011, System Profiler is suggesting that it uses SATA III for the hard drive and SATA II for the Optical Drive.  Is that true?

    On my Macbook pro 15, 2011, System Profiler is suggesting that it uses SATA III for the hard drive and SATA II for the Optical Drive.  Is that true?

    That is correct. The tech specs indicate:
    Hard Drive Interface
    6.0 Gbps Serial ATA (SATA)
    Optical Drive Interface
    3.0 or 6.0 Gbps Serial ATA (SATA)

  • How can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

    how can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

    If you have an RS-232 interface to the digital video recorder, it may be that you can send a command to the video recorder in order to get the time code sent back to your application - you would then read this as a string and then incorporate this data into your program.
    The best source of help will be any documentation you have relating to the serial (RS-232) interface with the digital video recorder. This documentation should have commands that you can send to the recorder and expected response strings that you should get back from the device. This task should be straightforward but can often be frustrating without documentation about the video recorder. This will not be something that you can "guess" - past experience in writing serial communication ap
    plications has shown that a good manual is your best friend.
    Failing this if you have any source code for example programs that have already been written to communicate with the recorder, you might be able to extract the relevant ASCII strings and use them within your application. This is true whether you are using LabVIEW or a text-based language.
    Jeremy

  • By default, on a mac keyboard F3 lets you see all the open apps and the such. However, I changed it so that I use those keys for keyboard shortcuts; But i'd like the normal F3 key to still work without me having to press FN.

    By default, on a mac keyboard F3 lets you see all the open apps and the such. However, I changed it so that I use those keys for keyboard shortcuts; But i'd like the normal F3 key to still work without me having to press FN.

    rajlego,
    in the Keyboard pane of System Preferences, select the Shortcuts tab, and then select Mission Control on the left-hand side. On the right-hand side, make sure that the Mission Control checkbox is checked, double-click on its current key combination (by default “^↑”) so that the key combination is highlighted, and then press the F3 button — that will set its shortcut to be F3. You can now press F3 to bring up Mission Control without needing to also press the Fn button.

  • I've got movies on my computer on itunes, however my parents wish that i use my laptop for itunes stuff, and i cant figure out how to get those movies to be able to sync with my ipod again, it wont recognize that I have them. Suggestions?

    I've got movies on my computer on itunes, however my parents wish that i use my laptop for itunes stuff, and i cant figure out how to get those movies to be able to sync with my ipod again, it wont recognize that I have them. Suggestions?

    While you're in itunes, with the leftside window open, click on Apps. Then, look across the top middle of your itunes screen. You will see several choices: All, Iphone/iPad Touch, Ipad, Ipod Games, List, and Updates. 
    Clicking on each of these gives you a different view. 
    When you select ALL you will see all of your apps. When you select Updates you sill see only the apps that need to be updated. When you are in Updates you will see the Update button in the lower right corner.
    Hope this helps.

  • I work for a funeral home that has used Photoshop CS2 for years.

    I work for a funeral home that has used Photoshop CS2 for years.  Within this program, we were able to upload a background "file" with themes - i.e., spring flowers, fall leaves, etc.  We would scan in pictures given to us by the deceased's family and "place" these on top of the background slide.  We then used a software program, Nero, to create a slide show with music to play during the viewing.  I've spent some time looking over the products and do not see one that will allow us to continue this very simple practice.  I would appreciate the opportunity to speak to someone about this.  Thank you.

    Newer versions of Photoshop have new feature that CS2 does not have. However CC 2014 like CS2 does not have a slide show with sound feature.  I have a Windows 7 Pro system. Have CS2, CS6, CC and CC 2014 installed.  You need and Updated CS2 Installer to install CS2 on windows.  CS2 is a 32 bit Photoshop there is no CS2 version that will run on new Mac computers their 64 Bit OS offered no 32bit options.
    A $10 a month subscription will keep up to date with the latest Photoshop.  Your other option is to buy CS6 for $700.  CS6 is no longer supported it just marketed as is.

  • TS2580 I am attempting to use a 3rd party host to publish web site designed from I-web. The main page of the site is asking for host IP address, etc.  I've got all that, except it is asking for Directory/Path.  To what is this referring?  Thanks!

    I am attempting to publish a web site designed on i-web using a 3rd party host.  The main page of my web site is asking for IP address of host, etc.  I have all that, but it is asking for Directory/Path.  To what is this referring?
    Thanks.

    The directory/path is the path to the root folder and, in most cases, should be left blank...
    http://www.iwebformusicians.com/iWeb/Publish-Website.html

  • Everyday when I open Firefox a msg come on the screen that says "It is stronly recommended that you apply this update for Firefox ASAP." The connectivity server will not connect. Is there some way to disable this request?

    Everyday when I open Firefox a msg comes on the screen that says "It is strongly recommended that you apply this update for Firefox ASAP. When I try to install, it will not connect to the connecting server so it just clocks forever.

    See:
    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    Remove the files in the updates and updates\0 folder.
    You may need to delete active-update.xml and updates.xml as well if present.
    XP:
    C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
    (%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)
    If you have problems with updating then easiest is to download the full version and uninstall the currently installed version.
    You may need to remove the Firefox program folder to do a clean install of the new version.
    Do a clean (re-)install:
    * Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Do not remove personal data if you uninstall the current version.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • Can't sync Digi 002 as an interface for Logic Pro 7

    I discovered Logic about a year after I had already purchased a Digi 002, and have been using it as my interface for Logic Express for about 6 months.  No problems.  I upgraded to Logic Pro 7 last month and now get only garbled sound and the following error message. "Error while trying to synchronize audio and midi.  Sample rate 88215 recognized.  Check conflict between Logic and External Device."
    I am trying to run Logic Pro 7.  I still also use Pro Tools LE version 7.0 which runs fine.  I can play itunes songs, Garage Band, movies, Pro Tools songs, etc., no problem, but not Logic Pro, or Logic Express.
    When I switch to Built In Audio, Logic Pro works fine through the tiny built in speaker, but trying to use the Digi 002 as my interface all the sound comes out garbled.  
    I have been pulling out my hair for weeks.  Any help would be much appreciated.

    Tony P.M. wrote:
    The digi people also recommended buying the update for 7.3 and then updating to 7.3.cs4.  I am going to give that a try.  What does Pro App Support 4.0 do and where do I find it if you think that might help me?
    That is what I'm running, and it works great. Give it a shot. You can do a search on this forum, or on the Apple Support section of the website, and search for that term (Pro Application Support).
    Yes I have learned my lesson with auto update.  Live and learn.
    Yes. Remember, a DAW machine is NOt a regular computer you can do whatever with. Audio software and hardware are finicky creatures that don't play nice if you're messing with their operating system willy-nilly.
    I spoke with the Apple Store people today as well.  They suggest I spend $100 and sign up for one on one support and bring the whole **** set up in to the store and let them work on it. Seeing as how I am using a G5 tower, and we are talking about a digi 002 board, that is going to be alot of fun to lug across the mall.   I am just about that desperate though.  Any thoughts on one on one support in store?
    LOL!!! they just want your money, and will most defniintely screw up your system. They'll update wrong, install stuff you don't want, and re-configure your system to THEIR liking. Stay away from the genius Bar. When it comes to Pro audio, they really know little or nothing. As an example, I went to my local Apple store recently and asked for a copy of Logic Pro. the helpful guy there responded "Logic what? we don't have that kind of software here."
    Thanks for the help.  Again.
    You're welcome. Hopefully soon you'll have it up and running.
    Cheers

  • Ivé just recived logic and I wonder: can I use the registration for logic on all my computers or is it limited to just one?

    Ivé just recived logic and I wonder: can I use the registration for logic on all my computers or is it limited to just one?

    You can install it on 2 Apple computers

  • What's the best audio interface for Logic Pro and Mac?

    What's the best audio interface for Logic Pro and Mac?

    Depends on the computer model and if you have unlimited funds.

  • I bought Logic Express in September for the $200 that Apple is now charging for Logic Pro. Anybody in the same boat? Is it worth another 2 bills for the the Pro? Is there any kind of "upgrade" pricing?  Thanks, all

    I bought Logic Express in September for the $200 that Apple is now charging for Logic Pro. Anybody in the same boat? Is it worth another 2 bills for the the Pro? Is there any kind of "upgrade" pricing?  Thanks, all

    CFRiverdog wrote:
    Is there any kind of "upgrade" pricing?
    Nope
    CCT

  • Using local interfaces for EJB (session bean)

    Hi,
    I�ve a question regarding when to use the Local interfaces(EJBLocal and EJBLocalHome) of a enterprise bean. I understand that calls to enterprise bean can be made locally if the client which is invoking is in the same JVM as that of EJB. I�ve written a web client (servlet) which is packaged in a EAR and this servlet is trying to invoke a session bean which is in a �different� EAR using local interfaces. Both the EARs have been deployed in a single server (websphere 6.0 server). It didn�t work for me this way�..If I package the servlet in the same EAR of session bean then it works fine.
    So is this to say that both EARs are not running on the same JVM? Or should it work even if the client and the session bean are in different EARs but in same server?
    Can anyone explain me the fundamentals behind this.
    Thanks in advance

    Local access is only portable within the same .ear. For example, the Java EE SDK and SUN's
    application servers have never supported local EJB access from a web/EJB component in a different
    .ear. One issue is that local access requires that both the caller and target EJB have the same
    classloader. By definition, different Java EE applications have distinct classloaders. In addition,
    in Java EE 5 persistence context propagation does not span applications, so it wouldn't work in the
    local case.
    --ken                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • How to use multiple Interfaces for the same BS?

    Hi @ ,
    Is it possible to have a scenarion where i am using multiple interfaces in the same BS based upon some conditional field in the message.
    I amnot able to get the solution I know with condition editor I can have multiple receivers but in my scenarion based upon message fiels i have to decide which BAPI to be used and wht mapping and then post it to the same System
    Any help will be highly rewarded
    Regards

    Hi-
    Yes it is possible you can use multimapping for mapping the interfaces.
    To know more about multimapping see
    http://help.sap.com/saphelp_nw04/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/content.htm
    Some more helpful links
    /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible

  • An error happened when i open my itunes, error -42032, and now i can't add song or movies to my ipod it says that my PC is not authorized with my ipod, i used this pc for the last 3 years, what sould i do??

    An erroe happened when i open my itunes , error -42032,my ipod wasn't connect to my pc at that point, the results is that i can't add songs and movies that i'm buying or had already bought in my ipod because it says that my pc isn't authorized to do it. the point is that i'm using this pc for the last 3 years with my itunes and ipod

    check out this support article.

Maybe you are looking for