Is it risk the data lost switch from Full Recovery mode to Simple Mode?
Please click the Mark as Answer button if a post solves your problem!
Also.. When you change recovery model of the database, first thing you do is the full database backup.
This is assure you that you do not loose data because of change in recovery model.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
Almost right, without question you need to take a backup if you are changing from Simple to Full; switching between full and bulk logged and vice versa does not affect your point in time recovery options; backing up after switching to Simple is not necessarily
essential but it is advisable.
Please click "Mark As Answer" if my post helped. Tony C.
Similar Messages
-
Flex GUIs get a bad performance in normal screen mode when switched from full screen mode
Hi, there :
I encountered an odd situation and it is only happens on IE. Our project is a Flash 3D Game using Stage3D, and the Game's GUIs are created by CS6. When our game switch from the full screen( StageDisplayState.FULL_SCREEN_INTERACTIVE or StageDisplayState.FULL_SCREEN ) to normal screen ( StageDisplayState.NORMAL ), the performance of the Game GUIs decline to approximate a half FPS of full screen mode. But this condition is only happens on IE.
The Game is normal screen when it is initialized and the performance is as same as fullscreen. The performance degradation only happens after switching to normal screen mode from full screen mode.
p.s. : When the mouse is out of the view, the performance become better, from 20 fps up to 50 fps. But is still not as same as the original 60 fps.
p.s. 2 : My colleague told me the Flash Pro CS6 be used to built a single swc file per GUI, and then package all ui swc files to one swc file by Flex Framework SDK( the command is "compc" ). and the IE version = 9.0.8112.16421, the Flash Player Version = 11.6.602.155.
p.s. 3 : I have utilized Adobe Profiler Scout to observe the application, and I found that when it switches to normal screen mode from full screen mode, the time 「Waiting for GPU」 in 「Inactive」 grows up from 10ms to approximate 30ms which is triple. And in the 「Activity Sequence 」tab, it shows that the 「Waiting for GPU」 happens in the 「Copying to screen 」in 「DisplayObject List」.
ThanksThis does sound like a specific bug with IE. It would be great if you could file a bug report here (https://bugbase.adobe.com/), so we can get somebody to look into it.
btw, Flex is really not a good framework for games - it's really slow and heavyweight. If you're just wanting some lightweight UI elements, you might want to check out the Feathers framework, which is built on top of Starling: http://feathersui.com/ -
Changing from full recovery model to simple in sql 2012 always on
how do I change from a full recovery model to simple in an always on sql 2012 setup? When I try to change it it gave this error
The physical size of the log file will not change unless you manually shrink the file. A backup marks the log space as "reusable" internally.
Please see:
http://msdn.microsoft.com/en-us/library/ms365418.aspx -
I have a mid year 2007 24 inch iMac and will be purchasing a new 27 inch Retina iMac, what is the easiest way to transfer the data and files from my old machine to the new one?
Following up on this thread,
I have a new iMac on the way and my current is from 2008, never had a problem but I am sure there are internal issues that I would prefer not to transfer.
I have no issues other then the slowness in certain programs and that is the main reason to buy a new one.
Programs like numbers and pages seem to take a longer time to open after I update to Yosemite.
I only use 272GB of 500 GB, my memory is 4GB and I am upgrading to 8Gb and bought the 4.0 processor.
Question:
Is there a way to manually transfer items or would that be a waste of time in that if there are issues they could be anywhere and would transfer anyway? -
How to extract the date n time from images
can anybody help me...what function/ method that i can use to extract the date an time from images
thanksHi norazanita,
Please give clear idea what you want so one can proceed.
And if i am not wrong and get you correctly than i think you need to read about OCR for JAVA.
Regards,
Joshi Shirin. -
How the data is fetched from the cube for reporting - with and without BIA
hi all,
I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
CASE 1: I have taken RSRT stats with BIA on, in aggregation layer it says
Basic InfoProvider *****Table type ***** Viewed at ***** Records, Selected *****Records, Transported
Cube A ***** blank ***** 0.624305 ***** 8,087,502 ***** 2,011
Cube B ***** E ***** 42.002653 ***** 1,669,126 ***** 6
Cube B ***** F ***** 98.696442 ***** 2,426,006 ***** 6
CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
Basic InfoProvider *****Table Type *****Viewed at *****Records, Selected *****Records, Transported
Cube B *****E *****46.620825 ****1,669,126**** 6
Cube B *****F ****106.148337**** 2,426,030***** 6
Cube A *****E *****61.939073 *****3,794,113 *****3,499
Cube A *****F ****90.721171**** 4,293,420 *****5,584
now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
Can someone pls clarify on this difference in records being selected.Hi,
yes, Vitaliy could be guess right. Please check if FEMS compression is enabled (note 1308274).
What you can do to get more details about the selection is to activate the execurtion plan SQL/BWA queries in data manager. You can also activate the trace functions for BWA in RSRT. So you need to know how both queries select its data.
Regards,
Jens -
How the data is fetched from the cube for reporting
hi all,
I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
CASE 1: I have taken RSRT stats with BIA on, in aggregation layer it says
Basic InfoProvider *****Table type ***** Viewed at ***** Records, Selected *****Records, Transported
Cube A ***** blank ***** 0.624305 ***** 8,087,502 ***** 2,011
Cube B ***** E ***** 42.002653 ***** 1,669,126 ***** 6
Cube B ***** F ***** 98.696442 ***** 2,426,006 ***** 6
CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
Basic InfoProvider *****Table Type *****Viewed at *****Records, Selected *****Records, Transported
Cube B *****E *****46.620825 ****1,669,126**** 6
Cube B *****F ****106.148337**** 2,426,030***** 6
Cube A *****E *****61.939073 *****3,794,113 *****3,499
Cube A *****F ****90.721171**** 4,293,420 *****5,584
now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
Can someone pls clarify on this difference in records being selected.Hi Jay,
Thanks for sharing your analysis.
The only reason I could think logically is BWA is having information in both E and F tables in one place and hence after selecting the records, it is able to aggregate and transport the reords to OLAP.
In the second case, since E and F tables are separate, aggregation might be happening at OLAP and hence you see more number of records.
Our Experts in BWA forum might be able to answer in a better way, if you post this question over there.
Thanks,
Krishnan -
How the data extraction happens from HR datasources from R/3 to BW system.
Hello All
How the data extraction happens from HR datasources from R/3 to BW system.Incase of delta records ( for CATS datasources ) ,Is there any flow like LO .
Incase of Full and delta loads how does the data will be taken from R/3 to BW,DO we need to fill setup tables ?
Searched forum but couldnt able to find the relevant one.
Thankyou
ShankarHi Shankar.
HR Datasources do not have setup tables . Though before implementation, certain customizations should be done and the delta loads have dependency on other data sources. Also you must have implemented Support Package SAPKH46C32, or have made the relevant corrections in SAP Note 509592.
Follow this link for details on customization and dependencies for all CATS datasources.
http://help.sap.com/saphelp_nw70/helpdata/en/86/1f5f3c0fdea575e10000000a114084/frameset.htm
Regards,
Swati -
Hi expert,
I have an urgent requirement from the client.
Delete the sales order item totally in ECC.
I planned to implement this enhancement in ECC. Check the data in BDOC from CRM middleware, according to the user status in the order item,decide whether the item can be deleted.
My question is,where can I settle this enhancement? The BADI name,user exit?
Thanks in advance.
Jerry.Hi Jerry,
It may be delayed. you may found the solution.
Use BADI CRM_DATAEXCHG_BADI and try the code in MBDOC_FILL or BAPI_FILL method.
Regards,
Bala -
Is there a way to remove the date and time from pictures?
Is there a way to remove the date and time from phoos in iPhoto?
Are you referring to the Date and Time some cameras put right on the image? If so there is nothing really good in iPhoto to do this. You could try the Retouch tool and see how that looks but I think you will need something more precise and powerful, like the clone tool in Aperture.
Also something like PhotoShop or GIMP - The GNU Image Manipulation Program (free) should do what you want also.
If your asking about some other date post back.
regards -
Can anybody advise me on which key I need to press on start up to be given the option of switching from Windows 7 to Mac OS?
Many thanks.
John"option"
-
How the data gets replicated from CRM to ISU
Hello All,
How the data gets replicated from CRM to ISU?
Would appreciate documents send to [email protected]
Regards,
RemiHere is the link!
http://help.sap.com/saphelp_crm50/helpdata/en/c8/b0a68afbb3624cbabeb5ea12a8c639/frameset.htm
Cheer,
Daniel
http://sapro.blogspot.com -
Where does the data get saved from (notepad) or Notes on Windows Mobile 5?
Where does the data get saved from (notepad) or Notes on Windows Mobile 5?
(ON the Phone) Sticky note like program WM5
I ask because I synced my Blackjack 1 to my pc after about a year and MANY notes later, All the notes from the PC remained but ALL new notes on phone (a years worth) were deleted from the phone.
I would like to attempt a data recovery on my mobile device- that was an insane endeavor but i got it to work now i just need to know what to look for (what type of files to recover) and or where to recover from?
I did make the phone a drive already and have data recovery software that can pull deleted files from the phone in fat or raw data format.
Thanks.Hi,
I think this is not the best forum for your question. This forum is for Microsoft Exchange Server's mobile connectivity issues.
Regards,
Zoltán
http://www.clamagent.org - Free Antivirus for Exchange
http://www.it-pro.hu
http://emaildetektiv.hu -
Does anyone know when the Mac Pro switched from ATA to SATA DVD Drives
Does anyone know when the Mac Pro switched from ATA to SATA DVD Drives ?
I tried to find this answer online but failed.Appears the Mac Pro (Early 2008) is the last model to suggest Ultra ATA/100 optical.
And with an optional card, use Serial Attached SCSI via Mac Pro Raid.
This kind of information gets sketchy in that the hard drive bus and other parts are SATA
and only this (and earlier) model Mac Pro has optical drive interface w/ Ultra ATA/100. The
logic board on the early 2008 appears to have two Serial ATA ports, 3.0GBPS; so to check
these, you may need to look into specification in iFixit.com repair guides, any takeapart
guides, and note specifications in everymac.com and those from mactracker.ca.
The MacPro after Early 2008 model build series (Early 2009) appears to sport an optical
drive with 18x speed, compared to Early 2008 & before, whose drives indicate 16x spec.
Other changes may be indicated by certain parts and differences; processors, graphic
support, and those kinds of things. 2008 shows dual-core, afterward, quad-core.
So on what little I found, that would appear to be the divide or when optical drive spec
on the logic board changed from Ultra ATA/100 to SATA versions. But double check.
Good luck & happy computing! -
Fill in the data in BW from RP
We fill in the data in BW from RP, all movements which not standard which begin on Z, don't appear there. In what there can be a problem?
Hi,
Do init without data transfer in BW under your Infopackage.
After this, run the delta load.
Regards,
Suman
Maybe you are looking for
-
Problems with a c++ code on a linux pc translate into java windows pc
Hello does anyone know how I can use this c++ code in my java program. This is a c++ code what we use on a linux pc now I have to make the code for a windows pc with java. void GetLocalIP(int s,struct sockaddr_in *local) struct ifconf cfg;
-
I currently have an email address I no longer use on my iPhone. Whenever I delete it, I always lose a bunch of contacts (I can tell because I have random numbers in my text messages). So I always have to add the account back. How do I get those conta
-
Conversion of organizations to contact persons in the segmentation model
Hi Folks, I want to do Conversion of organizations to contact persons in the segmentation model.But I don't see context menu of the target group in graphical modeling which is Follow Up Convert Organizations to Contact Persons.Can you guys suggest h
-
RSTRAN & RSBKDTP doesn't convert source system
Dear All, after a system copy from BWP to BWT, and the opportune post-activities (BDLS & change of conversion of source system name after transport), there's a problem with the transport from BWS in BWT of transformation and DTP objects that, respect
-
Reparation process for goods delivered back from customer for repair
Dear friends, I have to create an "easy" process with which we can create a sort of "return from customer". This process should enable us to create us a "customer stock". So value should not be on our plant but we need to show, that there is a materi