Is it safe for me to change the housing back color on my IPhone 5c?

Meg St._Clair wrote:
VEFipps wrote:
Is it safe for me to change the housing back color on my IPhone 5c?
I'd go a little farther than Peter and say, "No, it's not safe."
And I'd go a little farther and say, "No, it's not safe," and ask the question of why they didn't just buy the color they wanted in the first place

Similar Messages

I made a big mistake to change the setting of my Mac book pro to "me only". Now ofcourse It cannot open the login page, for how would the mac know it is me? How can I change the setting back to "everyone"?

I made a big mistake to change the setting of my Mac book pro to "me only". Now ofcourse It cannot open the login page, for how would the mac know it is me? How can I change the setting back to "everyone"? I have back up in the past but the last month I have not. I really want to keep the data.
So how can I go in and change the setting, It stays ofcourse at the apple screen with wheel. All info is there and the computer works fine, just cannot use it or have been able to log in.

wjosten is spot on. If you really want iCloud, then you will need to acquire a new or second hand MBP that can run Lion.
Ciao.

Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to setting-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to settings-privacy-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

when you opened the shared library with the newer version of iPhoto (iPhoto '11) you were given a warning that your library would be converted and could not be used by older versions - you clicked ok to go ahead - there is no updo available - either upgrade to iphoto '11 of the MBP or load your backup of the iPhoto '09 library on it - older versiopns of i{Photo can not read newer libraries
LN

The CR 2010 for VS engine changes the margins and scales the report

The CR 2010 for VS engine changes the margins and scales the report but only when printing.
Environment:
OS: Windows 7 x64 / Windows 2008 x64
VS: VS 2010 x64
CR designer: CR 2008 SP3.5
CR engine: CR 2010 for VS SP1
We have upgraded the Crystal Reports engine from version 10 to u201CCrystal Reports 2010 for VSu201D and are now having major issues with printing reports to preprinted papers, giro forms etc. because the report margins are changed and the reports are scaled (when report elements are in non-printable area?). Reports with elements in non-printable area are shown correctly in print preview (CR 2010 CrystalReportViewer) but moved to printable area when printed. This behavior was different in CR 10. Changing the PrintLayoutSettings in code is ignored when printing.
Error u2013 The printed reports are scaled:
-     Print in the CR 2008 Designer SP2
-     CR 2010 for VS SP1
OK u2013 The reports are not scaled:
-     Print in the CR 2008 Designer SP3.5
-     Print in the CR 10 Designer
-     CR 10 engine
Test:
1) Crystal Reports Designer 2008 (with SP 3.5)
a) Create a new blank RPT file.
b) Set report margins to 0,0,0,0 in Page Setup.
c) Add a box in the upper left corner (x=0, y=0).
d) Select "Print preview" and validate that the box is located in 0,0 in preview window.
e) Select u201CPrintu201D and validate that the box is located in 0,0 of the paper. Some of the box borders might be outside of the printable area but that is ok.
2) Visual Studio 2010 and u201CCR 2010 for VSu201D with SP1:
a) Create a new Windows Forms Application project (.NET Framework 4.0). Set project to u201C.NET Framework 4.0u201D and platform target u201Cx86u201D.
b) Add the CrystalReportViewer control to Form1.
c) Add the RPT file to the CrystalReportViewer control
d) Run the application
e) Validate that the box is located in 0,0 in the CrystalReportViewer control.
f) Select the "Print" icon in the CrystalReportViewer
h) Click the "Print" button and validate that the box is moved to the printable area which is wrong.
Notice: In the print dialog (CR 2010 for VS) select the "Layout" tab page and see that "Scale u2026" is selected and cannot be changed. This is different from the CR 2008 Designer even though that it is the same report file and printer.

I have done the requested test (and more - see below) and can not reproduce the issue.
Tests done
1) Crystal Reports Designer 2008 (with SP 3.5)
a) Create a new blank RPT file.
b) Set report margins to 0,0,0,0 in Page Setup.
c) Add a box in the upper left corner (x=0, y=0).
d) Select "Print preview" and validate that the box is located in 0,0 in preview window.
e) Select u201CPrintu201D in the CR designer. Results in the box printing at 0,0 coordinate of the paper.
f) Repeat all of above with a text field report
g) Select u201CPrintu201D in the CR designer. Results in the text printing at 0,0 coordinate of the paper.
2) Visual Studio 2010 and u201CCR 2010 for VSu201D with SP1:
a) Create a new Windows Forms Application project (.NET Framework 4.0). Set project to u201C.NET Framework 4.0u201D and platform target u201Cx86u201D.
b) Add the CrystalReportViewer control to Form1.
c) Add the RPT file to the CrystalReportViewer control
d) Run the application
e) Validate that the box is located in 0,0 in the CrystalReportViewer control.
f) Select the "Print" icon in the CrystalReportViewer
g) Click the "Print" button
h) Text filed report test results in the text printing at 0,0 coordinate of the paper.
i) Box report test results in the text printing at 0,0 coordinate of the paper.
3) VS2010 IDE
a) Create a new blank RPT file.
b) Set report margins to 0,0,0,0 in Page Setup.
c) Add a box in the upper left corner (x=0, y=0).
d) Preview report in the ID designer and validate that the box is located in 0,0 in preview window.
e) Select u201CPrintu201D in the IDE designer. Results in the box printing at 0,0 coordinate of the paper.
f) Run above report in code
g) Preview report and validate that the box is located in 0,0 in preview window
h) Select the "Print" icon in the CrystalReportViewer
i) Click the "Print" button
j) Text filed report test results in the text printing at 0,0 coordinate of the paper.
k) Repeat all of above with a new report that uses a text field rather than a box.
None of my reports have the option "No Printer" checked.
All of my reports have the option "Dissociate Formatting Page Size and Printer Paper Size" checked
From the above, you can see that all of the printing tests result in consistent printing, be it a report created in CR 2008 or CRVS2010, useing a box or a field. No difference in printing.
Suggestions:
1) I am not sure if you have followed the steps you recommended. E.g.; are you creating a new report or using your existing report? See if following the steps described reproduces the issue (it may be there is something specific to your existing reports)
2) Make sure you have the latest printer driver available for your printer
3) Try a different printer
4) Add a report to the VS2010 IDE and preview the report in the IDE of VS2010
5) Compare the "No Printer" and "Dissociate Formatting Page Size and Printer Paper Size" options
6) Consider creating a phone case so a support technician can troubleshoot the issue with you
- Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

HT1386 I had to change the computer I have iTunes installed on, my iPhone is still looking for the old computer to sync over WiFi. How do I change the WiFi computer associated to my iPhone?

I had to change the computer I have iTunes installed on, my iPhone is still looking for the old computer to sync over WiFi. How do I change the WiFi computer associated to my iPhone?

Hi Terri571,
Welcome to Apple Support Communities.
See these steps for setting up Wi-Fi syncing between your iPhone and new computer:
iOS: Syncing with iTunes
http://support.apple.com/kb/ht1386
Wi-Fi syncing
Open iTunes
To set up Wi-Fi syncing, connect your iOS device to your computer with the included USB cable. Select your device under Devices on the left-hand side.
In the Summary tab, select "Sync with this [device] over Wi-Fi".
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it. The iOS device will sync automatically when all of the following are true:
The iOS device is plugged in to power
iTunes is open on the computer
The iOS device and the computer are on the same Wi-Fi network
While the iOS device appears in the left-hand column of iTunes, you can select the content tabs and configure sync options.
Click Apply or Sync to sync the iOS device.
If the iOS device does not appear in the Devices section or you are unable to sync, please see this article for troubleshooting.
Best,
Jeremy

This is so basic: How do you turn off Apple TV, or do you just exit by changing the Input back to regular TV? When I put Apple TV to sleep, I had to log in again, a very tedious process with that awful "announcer" for the hearing impaired (how to remove?)

This is so basic: How do you turn off Apple TV, or do you just exit by changing the Input back to regular TV? When I put Apple TV to sleep after I installed it, I had to log in again, a very tedious process with that awful "announcer" for the hearing impaired (and how to remove that?).

Welcome to the Apple Community.
The Apple TV will put itself to sleep. I'm not sure what you needed to log into again, but you shouldn't have to. Do you have a little more detail about what happens.

The divice for changing the an ipod touch to an iphone?

Hi,everybody, how do you know the divice for changing the an ipod touch to an iphone? I have an ipod touch now. I really want to own an iphone, however, the price were far beyond my ways. I hear that there is a device can change the ipod to an iphone, how is it?Anybody can tell me?
Thanks so much!

I do a LOT of calling on mine. Simply install the Skype app and get a SkypeOut account and SkypeIn number. They run about $60.00 a year for both. You get unlimited US & CA long distance, plus voicemail. For texting, I bought and use the TextFree app. You will need a wifi connection though for all this to work, but there are public wifi hot spots all over. I've even found open networks driving down the street. I just pull over, logon and make my call.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

How do I change the itunes user name on my iphone?

How do I change the itunes user name on my iphone? When I attempt to purchase an app or update the existing ones, the previous owner of this iphone has their information displayed and asks for the password as their user name is automatically prompted?

The apps are tied to the account from which they were purchased. If the apps were purchased from the previous owners account, then they would have to be updated from that account. you should not have these apps anyway. You need to buy your own.
Read the manual. it will tell you how to sign into your account to buy apps.
iPhone User Guide (For iOS 4.2 and 4.3 Software)
I would suggest restoring as new.

How do I change the main iCloud account on my iPhone?

How do I change the main iCloud account on my iPhone?

I activated an iPad for a work associate; somehow, MY Apple ID account is assigned to his iPad's iCloud backup. His iPad is using up all MY iCloud space... he IS set up in App Store with his own Apple ID.
On my own iPad (just to check out what settings/options were), i went to "Settings/iCloud: and tapped "Delete Acct". BUT, then I got a message that all Photo Stream and documents stored in iCloud would be deleted from this iPad... so, two questions...
is there ANY way for him to retrieve the documents he saved in MY iCloud account (there's 9.1g worth of HIS backup in my account!! ... i purchased extra space before i realized it was being eaten up by him and not mine).
Because he'd be logging back in under his OWN ID which had never backed up his device before......so, he'll lose everything, right?
Really need someone who KNOWS apple iOS/Cloud workings to answer this one please ... much (at least some, lol) of his data is work-related.... at 9gig, can't be all work!! must be a lot of movies, photo's and music i'd guess. as this is a WORK-issued device, so be it if he has to re-load all that................

How do I change the language back to english as it is running in chinese

How do I change the language back to English as it is running in Chinese?

On your keyboard, press the CTRL and the , (comma) keys at the same time
You will see a box like this:
Stay on the first tab (as shown) and select the drop-down menu as arrowed
English (UK variety) is the fifth one from the top. US variety English is the sixth one
Select your choice and click on OK
There will be an additional piece of text under the menu now; it simply tells you that you need to close and re-open iTunes for the language change to take effect.
That's it!

How do I change the default window color?

Having white screens is too bright for my eyes!! I always change the default window color in Windows (hiss hiss) to a light shade of gray and that setting carries thru to all windows (i.e. Word, Excel, notepad....). Is it possible to do a similar thing with Tiger? I see that I can choose between a couple of "schemes" from a "Desktop and Dashboard Settings" area (or similar - i don't have my mac here now so can't look to see the proper name) but I see no way to alter colors within those schemes. If you can tell me how to change the default color for my windows I will be awfully happy. thanks.

Personally, I wouldn't trust it, and I don't hesitate to try these things most of the time even though they sometimes cause problems. But I've used Unsanity products before and they all require installing a preference pane called APE; Application Enhancement module, and that thing caused me lots of problems for my system, lots of crashes and flakiness. I won't use it again.
But I'm sure there are lots of people using it happily, but if you don't feel confident in dealing with system problems stay away from anything that adds a system preference pane or goes up in the top menu bar at the top (Apple icons excepted) or has to start up with the system.

How do I change the tab background color in Firefox 4?

I just upgraded to Firefox 4. Tabs are now fine black font on dark grey background -- very hard to read. How do I change the tab background color?
I have searched and the closest I can come is some instructions for modifying .css files, and it is not clear that those instructions will impact the tab background color.
Thanks in advance for your help.

Similar question asked by TH received another response.
Here is the address of that question and answer:
https://support.mozilla.com/en-US/questions/804464?s=change+tab+color+firefox+4&as=s
I like the solution recommended there.
Added information - after several days experience, I notice that some tabs occasionally revert to the original dark grey. So I am still looking for a better solution, ideally within Firefox rather than via add on. This seems like a basic setting for the browser that should be easy to change, rather than something so complex that I need an add on to change it. Or just build it without such a dark grey background to begin with and I would not need to change it.

Changing the Preview highlight color

When you search a PDF file with Preview, you get a list of results in the drawer. Selecting a result goes to that page and highlights the search text. However, the highlight color is a dull gray and is often very difficult to locate quickly, especially on a page full of small text.
Does anyone know if this color can be changed, for example to imitate the easily visible color used by the Firefox find command? There's no obvious preference for this, but perhaps there's something hidden in the preference file?

Preview follows the system default, which sets the highlight color of inactive windows to gray and the active window to the color set in Appearance.
When you search, you can use Tab/ShiftTab to toggle focus between the drawer (containing the search instances) and the main page display pane.

Change the default highlight color

In the previous version of Acrobat, you used to be able to select a default color for highlighting. I use color-coded highlighting a lot and I can't find a way to change the default highlight color in Acrobat DC. It looks like the only choice I have is to change the highlight color of each highlight individually. Where did the highlight color preference go?

After changing the color of a highlight right-click it and click "Make current properties default".

How do you change the tab outline color

How do you change the tab outline color? I wish to use a black style on my test program but the tab features have a white edge on the top and left sides to try and give a 3d look. I've tried playing with the windows style but had no success. Does anyone know how to remove this or change the color? The closest I have got so far is setting a windows 7 basic theme which removes the 3d look. This does however give a white background on the tab pages which I cannot find a way of changing in either CVI or windows. Any suggestions?
Thanks
Solved!
Go to Solution.

Chris,
Unfortunately, this border is only customizable through the Windows theme. Changing the theme to the basic is likely going to be the closest to what you are looking for without creating a custom theme for Windows.
National Instruments
Product Support Engineer

Is it safe for me to change the housing back color on my IPhone 5c?

Similar Messages

Maybe you are looking for