Is it safe to never turn your pb off and leave it plugged in

Just wondering,
is it safe to never turn off your pb and have it plugged into the electricity most of the time? Will my battery run out quicker or anything stuff up?
cheers to you all

David
For the most part it is fine to leave your PB plugged in all the time. However, for lithium-ion batteries, it is advisable to do two things every so often:
1. At least once or twice a week, use your PB on battery power. This maintains some electron flow in the battery. You don't have to drain it, just use an appreciable percentage, say 25% (arbitrary number).
2. Once a month, completely drain your battery until the computer goes into sleep mode and then charge it back up to full.
You don't want to necessarily perform the second step too often as this will increase the cycle count on the battery, leading to faster than normal wear on it. Of course, I wouldn't NOT use the battery just because of this either.
Have a look at the middle column on this chart for some useful info:
http://www.batteryuniversity.com/partone-23.htm
And have a look at these knowledge base articles:
http://www.apple.com/batteries/
http://www.apple.com/batteries/notebooks.html
Ernie

Similar Messages

  • After installing IOS 7.3 my updates stay on the update list and  my iiPad will not fully charge after turning my iPad off and leaving it plugged in all night. It only charges 79%.

    Why do my recent app updates stay on the update page after updating?
    Why won't my iPad take a full charge after installing IOS7.3?

    Having the updated apps stay on the Update page in the App Store app is a new feature. It is especially usefu to those that have auto app update turned on. You then have a record of the recently updated apps, the new features they have and when they were updated.
    Are you charging your iPad with the wall charger that came with it or by some other means. The wall charger is the best way to charge the iPad. If it is failing to fully charge a reset might help. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • If i turn camera roll off and leave photo stream on and back up to the cloud will all of my photos be back dup on my mac?

    If i use icloud to back up my ios devices but turn camera roll off will all of my photos on my ios devices be saved on my mac? they appear to be in iphotos on the mac currently? I want to turn camera roll off from the back up as it is quite large, 19GB.

    They will if you have iPhoto '11 9.2.2 or higher and have Automatic Import checked in iPhoto>Preferences>Photo Stream (iCloud).  If you do, your photo stream photos are automatically imported to your iPhoto events.
    You can check by opening iPhoto, selecting photo stream (iCloud) on the left panel, then Control-clicking on you photo stream photos.  If the pop-up says "Show in Library", they have been successfully imported to your iPhoto library (Events).
    Edit: You can then use Time Machine to back up your iPhoto library.

  • How do you turn your music off on your ipod touch?

    how do you turn your music off on your ipod touch?

    Double click the Home button (fro a lock-screen) and the music control sill show. Tap the pause icon (two verticle parallel lines). The same from the Music app.

  • Can Apple make an app or an update that makes you insert your password to turn your phone off? This can help deal with theft of iPhones because people take or find a iPhone, the first thing they do is turn the phone off.

    Can Apple make an app or an update that makes you insert your password to turn your phone off? This can help deal with theft of iPhones because people take or find a iPhone, the first thing they do is turn the phone off.

    They probably can do such s thing if they choose to do so.
    Let them know that you would like this:
    http://www.apple.com/feedback
    Not sure this is a very useful thing.  It would run down the battery.  All a thief has to do is remove them SIM and restore the iphone to stop it from being tracked.

  • Can you turn your broadband off ?

    Can you turn your broadband off at night or say when you going out, when you turn it back do you receive the same speed,I'm sure I've had this conversation before and I think you can turn it off .Do any of you turn yours off and does it affect your speed I'm pretty sure it's fine to do just want to be sure.

    turning the hub of once a day should cause no problem but multiple restarts in day will cause you connection and speed problems i would not recommend turning it on and off they are designed to run 24/7
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?

    I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?
    What I am ultimately wanting to do is make more room on my computer by backing up all of my files onto the external hard drive and then deleting them off of my computer. However, neededing to be able to retrieve them from the external hard drive later down the road.
    From what I have read and am trying to understand, is that I probably shouldn't have used time machine. I need to use the external hard drive like a basic flash drive where I can put things on and get things off without having it automatically update through time machine everytime I connect it to my computer.
    Not tech savvy at all and barely understand basics. I need very simple and easy to understand explanations.

    sydababy wrote:
    and then deleting them off of my computer.
    BIG BIG MISTAKE ..... youre making a linchpin deathtrap for your data trying to shove everything on a single fragile HD.
    Dont suffer the tragedy other people make, buy another or 2 more HD, theyre cheap as dust.
    The number of people who have experienced terror by having a single external HD backup is enormous.  One failure that WILL HAPPEN, and kaput,......all gone!
    Dont do it, its all about redundancy, redundancy, redundancy.
    follow here:
    Methodology to protect your data. Backups vs. Archives. Long-term data protection
    Deleting them off your computer is fine....having only ONE copy is extremely BAD.
    The Tragedy that will be, the tragedy that never should be
    Always presume correctly that your data is priceless and takes a very long time to create and often is irreplaceable. Always presume accurately that hard drives are extremely cheap, and you have no excuse not to have multiple redundant copies of your data copied on hard drives and squirreled away several places, lockboxes, safes, fireboxes, offsite and otherwise.
    Hard drives aren't prone to failure…hard drives are guaranteed to fail (the very same is true of SSD). Hard drives dont die when aged, hard drives die at any age, and peak in death when young and slowly increase in risk as they age.
    Never practice at any time for any reason the false premise and unreal sense of security in thinking your data is safe on any single external hard drive. This is never the case and has proven to be the single most common horrible tragedy of data loss that exists.
    Many 100s of millions of hours of lost work and data are lost each year due to this single common false security. This is an unnatural disaster that can avoid by making all data redundant and then redundant again. If you let a $60 additional redundant hard drive and 3 hours of copying stand between you and years of work, then you've made a fundamental mistake countless 1000s of people each year have come to regret.

  • My dad gave me an iPhone 3G to use as an ipod touch but it's not picking up wifi. ive tried everything to like resetting the network settings turning wi fi off and on mutable times, turned the phone off on and on. What do i do?

    My dad gave me an iPhone 3G to use as an ipod touch but it's not picking up wifi. ive tried everything to like reseting the network settings turning wi fi off and on mutable times, turned the phone off on and on. What do i do?
    the iphone never really picked up wi fi when it was used as a phone and it didnt really matter because he had unlimited internet but it still wont go on wi fi. does any one know why it is doing this?
    The iphone works fine other wise i just really want it to go on wi fi. We just got new wi fi too and all of our other apple products go on the wi fi just fine. I dont know if its because its newer or what but my brothers 1st gen ipod goes on wi fi just fine.
    The iphone is updated to the latest ios too
    WHAT SHOULD I DO!!!!!!!!!!!???????

    This might help
    http://support.apple.com/kb/ht3406

  • I recently upgraded toSnow Leopard, after that I was given a continual message that I had to reinstall my Internet Cleanup. So I did. Then I turned my computer off and now it will not turn on at all. Help!

    I recently upgraded toSnow Leopard, after that I was given a continual message that I had to reinstall my Internet Cleanup. So I did. Then I turned my computer off and now it will not turn on at all. Help!

    See if your Mac will boot from the install DVD.
    Then uninstall Internet Cleanup.
    Allan

  • Hi my iph4s wont turn on or off and seems to be zoomed into a particular part of the screen, loads normally when rebooted the phone. what is wrong with it? and how would i go abouts fixing it?thanks

    hi my
    iph4s wont turn on or off and seems to be zoomed into a particular part of the screen, loads normally when rebooted the phone. what is wrong with it? and how would i go abouts fixing it?
    also recovery mode shows up as a red icon instead of a blue one, not jail broken or had any third party alterations
    thanks

    Reset the PRAM
    Reinstall the operating system from the dvd (you will not loose your data)

  • I lost the ability to use wifi after the 8.02 update.  Is there a way to fix this?  I've already tried resetting network.  Turned the phone off and on. Nothing is working and now I have to run on just data.

    I lost the ability to use wifi after the 8.02 update.  Is there a way to fix this?  I've already tried resetting network.  Turned the phone off and on. Nothing is working and now I have to run on just data.

        csdwarf,
    So sorry to hear about the trouble with Wi-Fi! Let's get that working the way it should. Could you provide us some more details regarding where this breakdown occurs? Are you having trouble with turning Wi-Fi on or connecting to your Wi-Fi? Are other devices connecting to your Wi-Fi without issue?
    BrianP_VZW
    Follow Us on Twitter @VZWSupport

  • HP LaserJet P1102w will only print wirelessly if I turn the printer off and on again

    I have 2 Laserjet P1102w that work fine printing through USB.  However, I was hoping this printer could become the standard wireless printer for individual users in the office.  I have setup 2 different printers wirelessly with their own static, reserved IP addresses and they are connected to our wireless access point (WPA).  We have  all laptops that are connected to the network via the same access point as well as through hard wired ethernet.  In all cases, they are on the same subnet.
    Once I connect any laptop to one of these printers wirelessly through either the "smart install" client or the latest regular installation exe off of HP's site, it will print fine initially.  However, whenever I undock the laptop or even just wait a few hours, the connection will be lost and I cannot print.  The queue just says "Error - Printing" when I print sometihng.  No errors in the logs.  The connection will come back if I turn off the printer and turn it back on.  This is very annoying and will probably not be acceptable to the users.
    So I wanted to do more testing and connected both printers to my laptop wirelessly and made sure they could print successfully.  I opened 2 command windows and ran a ping -t on each IP address to see at what point the connection dies.  The ping will reply until I undock and go from hard wired / wireless to just wireless.. then it will say "Destination unreachable" and I can't even access the web interface. Even if I redock to hard wired / wireless, I still can't print unless I restart the printer.
    This happens on 2 different laptops with 2 different p1102w printers.  Any clue as to what's going on here and how I can fix it?
    Edit:
    If I have both wireless and nic enabled, once I undock the laptop, the ping -t changes from replying to the ip of the printer, to replying to the address of the wireless adapter with "Destination host unreachable".
    For example:
    IP of printer: 192.168.2.95
    IP of wireless adapter on laptop: 192.168.2.25
    ping 192.168.5.95
    Reply from 192.168.2.95
    Reply from 192.168.2.95
    *undock"
    Reply from 192.168.2.25 Destination Host Unreachable
    Reply from 192.168.2.25 Destination Host Unreachable
    This does not happen if I disabled the nic and run only off the wireless card.  So the workarounds are to either turn the printer off and back on if I undock every time, or disabled the nic.
    At this point, I just want to understand why it is like this?

    Mowaffaq, you may want to determine whether you are making those changes in the master printing preferences (versus the adjusting the session printing preferences from within your application).
    Click "Start", click "Printers and Faxes" (or "Devices and Printers"), right-click your printer, and select "Printing Preferences". On the "Paper/Quality" tab, you should be able to specify A4 as your default paper for all future print jobs.
    Hope that helps.

  • Tried to upgrade to osx 10.9 from 10.7 and I didn't notice that it downloads in the launcher. I turned my mac off and ever since then it has glitched out and will not download no matter what I do. I have had it for 3 years which is out of warranty.

    Tried to upgrade to osx 10.9 from 10.7 and I didn't notice that it downloads in the launcher. I turned my mac off and ever since then it has glitched out and will not download no matter what I do. I have had it for 3 years which is out of warranty. It now has a blank bar under the launch pad and no matter how many times I try re-downloading it or restarting my computer it does not work. I use too play starcraft and other games on this computer although new patched/updates have made it that I can no longer do that now. Really frustrating having to deal with this especially after buying this computer upfront and now out of warranty.

    Go to your Applications folder and find a file called "Install OS X Mavericks".  Send it to the trash and delete it.  Then try the download again.

  • I downloaded a movie on itunes and turned my computer off and when i turned it back on the movie wasnt there so i went to re download and it says check for available download and it still won't let me down load it. what do i do?

    i downloaded a movie on itunes and turned my computer off and when i turned it back on the movie wasnt there so i went to re download and it says check for available download and it still won't let me down load it. what do i do?

    Hi runner_girl7585,
    Thanks for using Apple Support Communities.  If you weren't ever able to watch your rental movie, you can report this to the iTunes Store:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/ht1933
    Cheers,
    - Ari

  • While using my Iphone 5, all of a sudden  black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

    While using my Iphone 5, all of a sudden  black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

    Try resetting your phone, hold the home and sleep/wake button down until the apple symbol comes up, then release. If that doesnt work, you may have damaged your phone and need to take it to an apple genius bar.

Maybe you are looking for

  • Why don't some of my apps open after Time Machine restore?

    As I was diligently running Disk Utility for my monthly maintenance routine, it reported some disk errors which could not be repaired. I tried Repair Permissions and Repair Disk again but got the same result. I had no choice but to boot up off my Sno

  • Problems with photoshop elements 10 and windows 8

    I bought photoshop elements 10 for my wife last year for Christmas.  She decided not to install it on our old computer because we knew that we were planning to replace the computer this year.  We finally got around to replacing it and the new compute

  • Need some help in Essbase BR

    I have a small clarification on BR, can any one help me in explaining below BR @RELATIVE(@member(@substring([DIMMEMBER],0,3)),0) thanks Kumar

  • 9.2.0.1.0 Upgrade to 10.2.0.1.0 - Help

    Hi, My database version is Oracle 9i(9.2.0.1.0). I have to upgrade to 10G Relase 2(10.2.0.1.0). Is the direct upgrade supported? I tried to run Pre upgrade info tool 'utlu102i.sql' in my Oracle database. It is showing... DECLARE ERROR at line 1: ORA-

  • Best options for exporting a sequence and making a DVD

    Hello, I have a sequence that is 79 minutes long with the following properties: Vid Rate - 29.97 fps Frame Size - 1440 x 1080 Compressor - Apple Int. Codec Pixel Aspect - HD (1440x1080) This project began with the intention of being a short video, wh