Is it safe to re-install console on primary site server?

While trying to upgrade the Package Conversion Manager utility, and in removing the pre-SP1 version, I seem to have broken the console installed on our primary site server. On opening it crashes every time; a repair ran through but hasn't helped.
Is it safe to uninstall the console application and reinstall it?
Thanks
Bob

Yes; this should not cause any issues.
Torsten Meringer | http://www.mssccmfaq.de

Similar Messages

SCCM Console on Secondary Site 2012 R2

Hi all,
I just want to ask whether it is supported or not when install SCCM Console on Secondary Site Server in 2012 R2? I've searched over internet but does not find a conclusion about that.
From technet SCCM Console requirement and interoperability, there is no information that restrict install console from Secondary Site Server, but this link say it is not supported:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/7c31b2d6-130c-46d6-b24d-108110cb0b61/install-sccm-admin-console-on-secondary-site-servers-failed-on-one-of-two-server?forum=configmgradminconsole
Has anyone try this, because today i installed console from one of my secondary site server and successfully connected with the primary site. Hope that does not break anything because with the ability of RBAC in 2012 R2, i can assign the admin at branch
site permission he need to manage the clients in this secondary site.
Thanks,

I've seen it working with multiple customer. Also, I can imagine that it wouldn't be a supported scenario, purely because it's not tested (both new installations as upgrades).
As, I'm not working for Microsoft and it's not documented, I can't give you any official statements.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Issue getting WDS to Install for PXE in SCCM 2012 SP1 Primary Site

Hi All
I'm trying to get PXE boot working from our SCCM 2012 box but it never actually gets to the point of installing WDS when I check the box for PXE booting. I don't have SMSPXE.log since it never gets to that point and the distmgr.log never reaches
that point either. I've tried
uncheck pxe boot option - restart - re-check
uncheck pxe-boot - restart - install wds - leave it unconfigured - reboot - check pxe boot
uncheck pxe-boot - uninstall the vcredist 2008 packages - rebooting - install vcredist - check pxe boot option
the above with installing wds unconfigured
Below is the relevant portions of the distmgr.log file after I enable the pxe boot option no matter what manner of software is installed. We are running it on a VM in a Hyper-V 2012 enviornment in Windows 2008 SP2 x64. This issue is similar to this link
WDS PXE Secondary Site Issues but mine is on the Primary Site.
ConfigureDP SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:09 AM 4008 (0x0FA8)
DP registry settings have been successfully updated on TUSC2012.TALISKERUTAH.LOCAL SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
STATMSG: ID=9500 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=TUSC2012.TALISKERUTAH.LOCAL SITE=001 PID=2728 TID=4008 GMTDATE=Thu Mar 28 17:48:10.083 2013 ISTR0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
STATMSG: ID=9503 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=TUSC2012.TALISKERUTAH.LOCAL SITE=001 PID=2728 TID=4008 GMTDATE=Thu Mar 28 17:48:10.084 2013 ISTR0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
ConfigurePXE SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
CcmInstallPXE SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
RegQueryValueExW failed for Software\Microsoft\SMS\DP, PxeInstalled SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
RegReadDWord failed; 0x80070002 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
Running: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
Waiting for the completion of: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
Run completed for: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Created the DP mutex key for WDS. SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Finding Wimgapi.Dll SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
MsiEnumRelatedProducts failed SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
FindProduct failed; 0x80070103 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
MsiEnumRelatedProducts failed SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
FindProduct failed; 0x80070103 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
GetFileAttributesW failed for SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
FindWimgapiDll failed; 0x80070002 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Running: msiexec.exe /quiet /i c:\program files\microsoft configuration manager\wim\wimgapi.msi /log c:\program files\microsoft configuration manager\wim\wimgapi.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Waiting for the completion of: msiexec.exe /quiet /i c:\program files\microsoft configuration manager\wim\wimgapi.msi /log c:\program files\microsoft configuration manager\wim\wimgapi.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:29 AM 4668 (0x123C)
Created policy provider trigger for ID 16777217 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:29 AM 4656 (0x1230)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:34 AM 4668 (0x123C)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:39 AM 4668 (0x123C)

HI again, sorry for the late reply.
By saying that WDS don't get configured, I mean that when i enabled the PXE functionality, the WDS role got installed but the folder remote install wasn't created.
I ahve now actually gone back to an earlier snapshot from before I started play with the PXE settings of the VM and now nothing happens when activating PXE on the distribution point, but not even the smspxe.log is created.
The Account used is a local admin and the distribution point is located on the primary site server.
EDIT: in the events log, it states the following:SMS_SITE_COMPONENT_MANAGER on computer XXX.XXXX.XXX reported: SIte comoponent Manger failed to to install on this site system.
On error (source: MsiInstaller) below:
Product Application Web Service -- Internal Error 25001. 80070490
I havent mentioned it earlier, but the Server OS is Server 2012.
I hope this might help you help me :)

Error while installing MBAM on my SCCM Server

I'm trying to install MBAM on my SCCM primary site server, but I am getting a strange error. Does anyone know what I'm doing wrong? My account is a domain admin account. Below is the error I see in eventviewer
CM provider unexpected error.
Description:
Unexpected error has occurred while retrieving information from the CM server.
Exception:
Microsoft.Mbam.Setup.Common.CmIntegration.CMException: Failed retrieving information for the connected site (SiteCode: 'PRI') ---> Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException: The SMS Provider reported an error.
---> System.Management.ManagementException: Unexpected error
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementObject.Initialize(Boolean getObject)
at System.Management.ManagementBaseObject.get_wbemObject()
at System.Management.PropertyData.RefreshPropertyInfo()
at System.Management.PropertyDataCollection.get_Item(String propertyName)
at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)
--- End of inner exception stack trace ---
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)
at Microsoft.Mbam.Setup.Common.CmIntegration.SmsEntities.SmsClassWrapper.GetInstance(ConnectionManagerBase connection, String objectClass, SmsNamedValuesDictionary filter)
at Microsoft.Mbam.Setup.Common.CmIntegration.SmsEntities.SmsSciClientComp.GetByItemName(ConnectionManagerBase connection, String itemName)
at Microsoft.Mbam.Setup.Common.CmIntegration.Implementors.CmConfigurationReader..ctor()
--- End of inner exception stack trace ---
at Microsoft.Mbam.Setup.Common.CmIntegration.Implementors.CmConfigurationReader..ctor()
at Microsoft.Mbam.Setup.Common.CmIntegration.CmPrerequisitesManager..ctor()
at Microsoft.Mbam.Setup.Common.CmIntegration.CmIntegrationProvider.InitializePrerequisiteManager(CmPrerequisitesManager& checker, FeatureProviderMessageList& results, CmIntegrationConfiguration configuration)

I´m not sure if you suppose setup the integration on CAS. I believe it suppose to be a Primary Site Server which is meant for integration. Check this out:
http://technet.microsoft.com/en-us/library/dn656920.aspx
I waited for 15 hours someone else reponse on this, no answer, so I decided to answer this but this might not be accurate.

Extremely slow results when console queries remote SQL server

We have a SCCM 2012 environment set up on our test network. Everything is virtual. I have a VM that has a primary site and VM that is a remote SQL server. Both are running Server 2008 R2. It has been running for a few month now and I have not had any
issues with console speed until now. When I try and look at updates in an update package, it will take about a half hour to display the 250ish updates that are in that package. The CPU on the Primary site server is running below 10% and the RAM is running
right at half. At the same time while SCCM is looking up the results the SQL box jumps to about 25% CPU and the RAM stays steady at about half as well. There are a couple other things on this SQL VM and it has 12 GB of RAM. I also see this behavior
when searching all updates, and general movement around the console. I have a maintenance task set up in SCCM to rebuild indexes every Saturday. There are only 80 clients inside of this test environment. What could cause this? Any ideas on how
to fix it?

The log said reindexing completed. Things look fine on the performance side. The VM running Configuration manager is a bit over powered and the VM running the SQL stuff seems to be about right. If I want to look in update packages, update groups, or
at all updates it is still extremely slow.
For example, there are 998 updates when this screen would finally load. It takes almost a half hour to populate the list. If I try and look at these and go somewhere else like administration it bogs the console down to an unusable state unless you let
it sit there for a half hour or restart the Configuration Manager server to break the query.

Will not start even in safe boot after installing latest camera update

MacBook Pro will not start even in safe boot after installing latest camera update.
I started my machine and did a software update. Only the camera update needed. So installed and when required I pressed restart. It restarted and did install. Then restarted again. I expected to get to the login screen and it turned itself off. Tried three more times. Each time shutting off. I unplugged everything, and pressed start waiting for log in window. No it shutdown before the log in window. I then tried safe mode and that did not work either on three more occasions.

I have managed to resolve some issues. I can now restart the machine via a CD boot. If I do cmd C into something like tech tool pro, then restart from that disks menu it restarts every time.
If I try a safe start it shuts down. If I try a normal start it shuts down. I have managed to repair permissions and that cleared up some start up permissions but with no improvement to the boot problem. The only way to load is via the cmd-C boot option. Any other ideas?

MDM Console Connectivity to MDM Server

Hi,
My scenario is that I have install MDM Server on one machine with Oracle as Database. Now when I try to connect to connect to that MDM Server using MDM Console from other machine it is not connecting.
The machine on which Console is installed is already having Oracle Server installed for another aplication. I did create a Net Alias and I can connect to Oracle Database on MDM Server using SQL plus of the server on which cnsole is installed.
Someone say that I need to install oracle client on MDM Server side....is it so ?
Regards
Vijay

Hi Vijay,
Assuming your MDM Server is on a Windows system:
Does a MDM Console on the very same machine connect to the MDM Server?
Kind regards,
Dennis

Site Code for SCCM Clients installed from Secondary Site Server

Hello,
We have started the implementation of SCCM 2012 R2 at our network. We have setup a Primary site (JFO) server & pushed out the installation of SCCM clients to the local subnet. Things went fine.
We have installed a Secondary site (ATC) at a remote network. We have tested client installation in the installation wizard we specify to install the client from the Secondary server. When SCCM client installed from the Secondary server, the site
code that appears on the client in the control panel->Configuration Manager client settings is the site code of the primary site and not the secondary site.
Is this behavior is normal

Ultimately, secondary sites do *not* manage clients and so will never be assigned to the secondary site. However, do note that resources in the console that represent systems that do not have the client agent may show the site code of the secondary site
if they fall within a boundary group associated with that secondary site. This is done so that client push can be initiated from the correct site. More gory details at http://blog.configmgrftw.com/secondary-sites-and-boundary-groups/
Jason | http://blog.configmgrftw.com | @jasonsandys

Installing problem on Windows 2003 Server 64 bit

Dear All,
I'am trying to install XE onto a Windows 2003 Server 64 bit.. The installation process ends without any errors but the database itself seems not to start.
I tried several hints that have been mentioned here within the forum. But none of them worked. While experimenting I saw that there is not a single registry entry of Oracle within HKEY_LOCAL_MASCHINE\Software .
Is there a possiblity to set those needed registry entries manually? Is there a script for that purpose?
Thank you very much for your help!
Regards
Matthias

Hi,
thank you for your reply. As 32bit programs should run under Windows 64bit I thought the XE should run under 64bit, too.
The installation of XE itself seems to finish without any errors. But within the log files it can be read that the database has not started up due to a out of memory problem. This causes many log entries within all other logfiles as no database could be created.
The out of memory problem might be the same as within Advice on running XE on a small virtual Linux host ("Virtuozzo") because I am using a virtual windows 2003 server with "Virtuozzo", too.
At this time I am on discussing the issue with the provider. Maybe I will get a dedicated server with Windows Server 2003 64bit. Hopefully the XE could be installed on the 64bit Windows Server because 32bit dedicated servers are rare.
Best regards
Matthias

Console Access to CPO Server in a different time zone: Verifying Security

Hello,
I noticed this on multiple instances, when CPO console in one timezone (example: CST) tries to access a CPO Server in a totally different timezone, the console is not able to login to the CPO Server and I see this error message:
"An error occurred when verifying security for the message"
Is there any known issue with console accessing the CPO server and some handshake happening?
From the logs:
@@Logging from process Tidal.Automation.Console.Loader.exe(id=13248)
||8|2013/03/06 19:20:00.365|13736||||Could not get server ID for assembly store connection:
||9|2013/03/06 19:20:00.366|13736||||EXCEPTION (System.ServiceModel.Security.MessageSecurityException): An unsecured or incorrectly secured fault was received from the other party. See the inner FaultException for the fault code and detail.
Stack Trace:
Server stack trace:
   at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.ProcessReply(Message reply, SecurityProtocolCorrelationState correlationState, TimeSpan timeout)
   at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
   at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation(SecuritySessionOperation operation, EndpointAddress target, Uri via, SecurityToken currentToken, TimeSpan timeout)
   at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore(TimeSpan timeout)
   at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
   at System.ServiceModel.Security.SecuritySessionClientSettings`1.ClientSecuritySessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Tidal.Automation.Common.AssemblyManager.IAssemblyManager.GetServerId()
   at Tidal.Automation.WinForms.Loader.AssemblyStore.GetRequiredFiles()
||10|2013/03/06 19:20:00.366|13736||||   INNER EXCEPTION (System.ServiceModel.FaultException): An error occurred when verifying security for the message.
Stack Trace:
||11|2013/03/06 19:20:37.696|13736||||Could not get server ID for assembly store connection:
||12|2013/03/06 19:20:37.696|13736||||EXCEPTION (System.ServiceModel.Security.MessageSecurityException): An unsecured or incorrectly secured fault was received from the other party. See the inner FaultException for the fault code and detail.
Stack Trace:
Server stack trace:
   at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.ProcessReply(Message reply, SecurityProtocolCorrelationState correlationState, TimeSpan timeout)
   at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
   at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation(SecuritySessionOperation operation, EndpointAddress target, Uri via, SecurityToken currentToken, TimeSpan timeout)
   at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore(TimeSpan timeout)
   at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
   at System.ServiceModel.Security.SecuritySessionClientSettings`1.ClientSecuritySessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Tidal.Automation.Common.AssemblyManager.IAssemblyManager.GetServerId()
   at Tidal.Automation.WinForms.Loader.AssemblyStore.GetRequiredFiles()
||13|2013/03/06 19:20:37.696|13736||||   INNER EXCEPTION (System.ServiceModel.FaultException): An error occurred when verifying security for the message.
Stack Trace:

More important than whether their timezones differ is whether their *times* differ.
12:00 in EST = 9:00 in PST as far as everyone (including Windows) is concerned.
If both are showing 12:00 then time sync is the problem, and this would cause authentication handshake issues. NT authentication only allows something like 10 minutes of clock skew. My example here has 180 minutes of clock skew.

Unable to install SCCM client on Windows Server 2008 R2 - certificate permission error?

I am trying to comply with corporate policy, which is, have an SCCM agent or client on every Windows device. I have successfully used the provided SCCM installer on other Windows 2008 R2 servers. However for one particular server I cannot get the SCCM agent
to install successfully. I've searched forums and documentation, but can't find a solution. Part of the problem is the lack of feedback by SCCM on what is wrong. I think I have narrowed down the symptom to the following error messages from the "C:\Windows\CCM\Logs\ClientIDManagerStartup.log":
[LOG[Certificate [Thumbprint C559304C1598F17641D0732EB9EB787169A25FA7] issued to 'SMS' doesn't have private key or caller doesn't have access to private key.
[LOG[Failed in GetCertificate(...): 0x87d00281]LOG]!><time="10:56:59.014+300" date="04-17-2014" component="ClientIDManagerStartup" context="" type="3" thread="3024" file="ccmcert.cpp:2122">
[LOG[CCMCreateAuthHeaders failed (0x8009200b).]LOG]!><time="10:56:59.014+300" date="04-17-2014" component="ClientIDManagerStartup" context="" type="3" thread="3024" file="clientauthutil.cpp:978">
When I use the Certificates MMC snap in to look at installed certs on this Windows Server 2008 R2 machine, there are plenty of normal and expected certificates there. There is also a branch called SMS with hundreds of entries, I have no idea what that is.
The above error seems to indicate a permissions issue. What do I do to fix this SCCM install? It seems like a server cert issue, not an SCCM issue, so I'm posting to the Windows Server forums.
Thanks in advance.
Thanks

this maybe helpful...
http://www.jamesbannanit.com/2011/04/certificate-requirements-for-sccm-2012/
should be asked in SCCM forum...
http://social.technet.microsoft.com/Forums/en-US/home?forum=configmanagerdeployment
Best,
Howtodo

Can I install Acrobat in a Windows Server 2008 for many users?

I'm looking for a solution for my enterprise to install Adobe Acrobat in Windows Server 2008 R2, where the users connect by remote desktop. I'm looking for a form for they use Acrobat by the same form they uses now Reader. But not for all, only for some of this users.
I called a responsible and he told me that I can install Acrobat for some users in Windows Server 2008 R2, but I'm not sure if that solution will be legal.
Can I buy a special license for it or I have to buy a license for each user? How can I proceed to do this, if it's possible?
Thanks in advance for you attention!

Use a mozilla.cfg file in the Firefox program folder to lock prefs or specify default values.
Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
pref("general.config.obscure_value", 0); // use this to disable the byte-shift
See:
* http://kb.mozillazine.org/Locking_preferences
You can use these functions in mozilla.cfg:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes
<pre><nowiki>lockPref("app.update.enabled", false);</nowiki></pre>

Referencing a "locally installed" Java applet from a server-based HTML page

How does one reference a "locally installed" Java applet from a server-based HTML page (i.e. via the applet, object, or embed tags)? I have seen references in documentation that this is possible, but I have not seen any examples. I have tried a few things, but nothing seems to be working.
Some background...
I'm working on a web site that aggregates Internet video. For many users, I would like the site to work "without" requiring Java to be installed (or any prompts, etc.). This version of the site allows users to stream videos directly over the Internet and does not require any sort of access to the local system.
However, in addition, I have a download manager that can be installed on the local system. Currently, it's a Windows-based "service" that is always running in the background, downloading files, etc. (with plans to later support other OSes).
My dilemma is trying to communicate between my web site running in the local browser (executing JavaScript code) and the download manager. I call this component the "gateway". I need the gateway to be able to do the following:
1) Pass user credentials from the web browser UI to the download manager (so it can communicate with my servers).
2) Check the status of downloaded videos
3) Launch a local media player (such as Windows Media, QuickTime, etc.) (or perhaps tell the download manager to launch the media player).
Under Windows XP, I have an ActiveX control that can do these things. It communicates with the download manager via reading/writing to a shared XML configuration file.
Unfortunately, under Vista and IE7 Protected Mode, ActiveX controls have become very restricted and my gateway no longer works. As such, I am looking at using Java for the gateway (also giving me the additional benefits of supporting additional browsers and OSes).
From my understanding, I believe I can created a "face-less" Java applet, whose methods can be called from JavaScript. Ideally, I'm thinking I could install the applet onto the local system at the same time the download manager is installed. This would give the applet the security permissions it needs to communicate with the download manager.
Thanks for any help and suggestions!

Hi,
Put the .jar file and the .class file in the path mentioned in one of the aliases in the plsql.conf file like /images or create
a seperate directory and create an alias like /applets "path" in the plsql.conf file.
<html>
<body>
<applet code=com.chartapplet.chart.BarChartApplet
codebase=/applets/
archive=/applets/chart.jar width=300 height=200>
<param name=background value="white">
</body>
</html>
Hope this helps.
Thanks,
Sharmila

Error While Installing IDES ECC6 with SQL Server 2005

Dear Experts,
I found an error while installing IDES ECC6 with SQL Server 2005. The error is raising at the stage of 17 of 24 processing the procedure of 195 of 197 (sap_z_set_permissions).
I have tried several times by configuring different type of activites but still i am facing the same problem at the same stage. Please help me in thig regard.
I herewith pasted hereunder log files information
Regards,
B.Sudharsan
ERROR 2008-01-17 18:38:47
FCO-00011 The step ExeProcs with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs was executed with status ERROR .
INFO 2008-01-17 18:40:05
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs".
ERROR 2008-01-17 18:38:47
MDB-05053 Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.

Sudarshan,
Occasionally, mid-way through the upgrade, DB permissions to users might change. Check to see, if the users SAP<SID>, OPS$ users have the DBA privilege. Re-assign the role and try continuing with the upgrade.

Unable to install Essentials Role on Windows Server Technical Preview (VHD)?

Hi
Having a problem trying to install Essentials Role on Windows Server Technical Preview (VHD)
After reboots, AD installs, I get Configuration encountered some issues in Results wizard.
Updating an preparing your server... 68% completed then it fails with following error.
"An error occurred while configuring Windows Server Essentials. Please try again."
Trying again same error.
Anyone able to get this installed?
TIA

Hi,
I did the same test without any problem.
You could try it again to check the result.
If it does not help, please refer to this kb article:
http://support.microsoft.com/kb/2914651
Regards.
Vivian Wang

Is it safe to re-install console on primary site server?

Similar Messages

Maybe you are looking for