Is it safe to run your mini on its SIDE?

I currently have my Mini tilted on its side and it is amazing how much space i can save like this without it being in front of the screen and then taking up s[ace next to it, but is this safe?

Salvatore,
Have a look here.
Google is your friend
JJ
Don't steal music !! Just a statement, not an accusation

Similar Messages

  • Is it ok to set a mini on its side ?

    Curious to see if its ok to run a 2013 mini on its side rather than on its bottom ?
    Thanks

    Yes it is fine and may be better since it may disapate heat better. You can purchase commercial stands that place them on their side.
    http://eshop.macsales.com/item/NewerTech/NUSTALYMINI/

  • Is it safe to switch on the G5 without side door?

    Just curious, is it safe to run the G5 without the side panel?
    Because i am looking to add another HDD and upgrade a few other things in it and don't want to open and close constantly to test.
    thanks in advance.

    the side panel is needed for proper air flow, you could probably run your machine for short intervals without it but it is necessary for regular use.

  • Will a standard G5 run on its side

    I have an old G5 and not much space to in my home office. I run a mac pro too. I was hoping to store the old G5 under the desk in a horizontal position. the G5 is not water cooled. It was my office computer and I would like to keep the content separate from my home stuff. Will running the computer on its side have any adverse effects I intend to screen share and am unlikely to use its CD drive again.
    Thanks in advance
    Graeme

    I ran Mac Pro on its side for two years (no hum that way for some reason) but I would be worried about air flow and ventilation if the desk blocks or limits air - especially out the back, or if it will be close to or against a wall.
    Pioneer SuperDrive had a 'lip' that held DVD/CDs in place but they did worry me, louder, and worry about positioning the read head.
    I use KVM from Gefen which has worked very well, just wish I could afford to run two dual DVIs or 3 computers. But never fails to detect and no delay, so I can run system A and B easily enough. Never used screen sharing, I prefer hardware.

  • Safe to run on 220 with a converter?

    Hi all - moving to Europe and was wondering if it is safe to run my macbook off 220 current using a converter. I heard you can potentially fry your motor. Anyone know if it is safe to do this?

    Danno33614 wrote:
    Hi all - moving to Europe and was wondering if it is safe to run my macbook off 220 current using a converter. I heard you can potentially fry your motor. Anyone know if it is safe to do this?
    Hi Danno33614: A voltage converter isn't required. You will need a plug adapter only. The MacBook Pro power block is rated for up to 240V.
    Hope this helps
    Stedman

  • How to report employee thief to adobe, safe harbor, and your partners, there is no email, no phone,

    how to report employee thief to adobe, safe harbor, and your partners, there is no email, no phone, spent 1 hr 26 min with Adobe support, and after I gave him permission to access my computer, I had to ask him if he was having a problem, than I receive a security notice that the software program is not from a confirmed web site and was downloaded to an unknown web address, when I asked the support
    person if this was the program, I did not see https or a lock and he sail it was ok it was him.
    I notice he had deleted some files and was in process of changing my security logins files and change wifi and proxy, when I tried to stop him he locked my mouse so I had to power off computer. after that there was a virus installed on my computer,
    I have spent the last 3 hrs getting a different virus protection software to clean my Hard drive.
    I want this guy fired,
    Funny I have been trying to get in touch with adobe since March 29,2015, no emails and when I got someone one the phone he could not under stand me, but I can understand why since he could
    not speak english, WOW Great support ADOBE.
    I bet I will get there attn. now.
    anyone have another way to contact this great company?

    I am unable to get the numbers about the first imd I contacted adobe, but was able to get the chat records if that would help, my computer is fried, I have been spending last 2 days trying to remove the virus and ad wares, I have been told looked like I will have to erase the drive an install every thing from scratch

  • Is microsoft Silverlight plug-in safe to run on OSX 10.7.5?

    Is Microsoft Silverlight plug-in safe to run on OS X 10.7.5  ?   Looking to stream download movies from Netflix

    berdel,
    For now, you will indeed need Silverlight for Netflix on your Mac.  As rkaufmann87 suggested, you should always get any plugin directly from the manufacturer and keep it updated frequently for security reasons.
    The good news is that Netflix is currently working on doing away with the Silverlight dependency.  Within a few months we should all be able to cellebrate when Netflix releases a new version that uses modern HTML5 instead of Silverlight, and will run on all standards-complient browsers such as Safari, Chrome, and Firefox.

  • Problem running your example with TCL in TestStand 2.0

    I`m having problems trying to run your example: "Calling TCL Scripts from TestStand 1.0.x". I use TestStand 2.0. In fact, I don`t see any response when running first step in a sequence. Could it be issues related to the TestStand version.

    The example should work in TestStand 2.0.x, since other users have reported that they have successfully done so and nothing has changed in TestStand 2.0.x that would affect its execution.
    In order to get the example to work you will need to have the TCL interpreter installed correctly so that the dll being used in the example can invoke it. If you can programmatically control the interpreter with any other code module as this dll does then this example should work as well. However, if you cannot do this in any way on your system then it is safe to say that nothing will work including the example. Verify that the TCL interpreter will work in this fashion per the vendor's instructions and then try the example again. If you are receiving errors from TestStand
    when executing the sequence let us know about those and we may be able to help you more directly.
    Jason F.
    Applications Engineer
    National Instruments
    www.ni.com/ask

  • Running Opera Mini 5.0 Beta (OR) any version on No...

     Hi there, 
    Can any one please tell me how to run Opera Mini 5.0 beta version on Nokia 5130 Xpress Music. I tried and it says no network availabe or not connected or no access. Its funny the same thing happened when I tried to install version 4. However later on i realised in the Browswer it comes with Version 4. If it can work there, why couldnt i independently install plus how can it work on the browser. I have tried giving access in all possible manners. 
    In addition I cant install Gmail as well.. same message, even though you give the okay to connect it says 'working connection required' I infact keep always online option switched on and still unable to do so.
    Please Please reply or help me out.
    Cheers,
    Deen  

    Contact your Service Provider for data connection settings.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • Is it safe to run an iMac without an earth connection?

    Is it safe -- for both the imac and for me! -- to run an iMac without an earth connection?

    You should always run your equipment earthed !
    Sadly, it's a lesson that many guitarists don't seem to head. They get a bit sweaty, and die...

  • Please! I need a solution to read the running max-min

    I am a starter and not too good in labview. I need to read the running max-min as the random numbers are generated in the loop. iam not getting it right. I have attached the VI. Can anybody please help me making it right???
    Please Please Please!!
    Thanks
    CL
    Attachments:
    run max.vi ‏46 KB

    Your code was somewhat confusing, it was hard to tell what was going on since the upper and lower kept flip-flopping (try to keep mins and max's seperate).  This is *almost* the same code you submitted, just cleaned up a bit more.  Remember that you want to initialize to the first value that comes out of the random number generator, since that will give you a real minimum since the generator may never reach the initialized minimum that you set (which in your case was zero, I doubt the generator will ever return true zero).
    -Danny
    Message Edited by texasdiaz on 09-26-2005 02:44 PM
    Attachments:
    run max.vi ‏45 KB

  • Safe to run MBP without battery?

    Hi, though I often like and am required to use my MBP without it's battery, I currently am just running it plugged into the wall. Since I don't want unnecessarily run down my battery without having gotten any true use out of it, is it safe to run my MBP plugged into the outlet without it's battery (the chance of a power outage causing me to lose my lost data aside)?

    In addition to the above posts, consider that not only would a power outage be a risk, but keep in mind the relative ease of disconnecting the MagSafe adapter.
    Also, there is a continuous chemical reaction occurring in the battery. Lifespan of the Li-polymer battery in your MBP is 400-500 cycles or 3-4 years, _whichever comes first_. If you leave it on the shelf for 3 years, unused, it will be nearly dead, especially since Li-based batteries need to be used to maintain their charge.
    See my tip for lots of details:
    http://discussions.apple.com/thread.jspa?threadID=1764220

  • I finally got my iphone fixed! Just wanted to say thanks to Austin! Not sure if you can see this but thanks a whole bunch! I wish you the best of luck in hopefully going to UT and in running your business!!!!-Tristian!

    I finally got my iphone fixed! Just wanted to say thanks to Austin! Not sure if you can see this but thanks a whole bunch! I wish you the best of luck in hopefully going to UT and in running your business!!!!-Tristian!

    Austin who?

  • Run a mini displayport cable over a Thunderbolt port

    Hi
    I have a new imac with 2 thunderbolt ports - and I want to run a mini displayport cable over a thunderbolt port - is there any cable can solve this ?

    http://store.apple.com/us/search?find=mini+display+port+to+hdmi+adapter
    https://www.google.com/search?sugexp=chrome,mod=6&sourceid=chrome&ie=UTF-8&q=Min i+Displayport+to+HDMI+adapter
    http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er
    http://www.amazon.com/Mini-DisplayPort-Adapter-female-Cable/dp/B0025V2VO0

  • Can someone tell me how many seconds the cross fade is when running your nano in that mode? I teach spin class and want to know how much time I'm losing in that mode.

    can someone tell me how many seconds the cross fade is when running your Ipod 6th Gen nano in that mode? I teach spin class and want to know how much time I'm losing in that mode.

    You aren't losing any time in that mode, but I believe it is a 10 second fade out/fade in.

Maybe you are looking for

  • Have a look at my RFC call, it doesn't return anything

    Hi all, In my project, I create a RFC Model named 'SCO' which will call bapi function 'BAPI_SALESORDER_CREATEFROMDAT1', if successfully a SALEDOCUMENT should return. below is the code in my custom controller   public void wdDoInit()     //@@begin wdD

  • Disk Error event ID 153

    Receiving disk error event ID 153 in Server 2012 - The IO operation at logical block address 0x0 for Disk 1 was retried. Does this error mean something is wrong with the hard drives?

  • Error when trying to use (GUI Wizards) on Table with BLOB, CLOB columns.

    I enjoyed watching the demo of ODP.NET/VS 2005 Environment where you can just drag the new command builders, data sets, etc.. but when I try this with a table that contains a BLOB and CLOB column it returns an error and basically cannot build the SQL

  • Missing Files. LR 1.1.

    All of a sudden I've got 590 'Missing Files'. All from the same folder. None are marked with a '?'. No folders are 'Red Flagged'. When using 'Show in Explorer', the files are shown to exist, in the relevant folder, exactly as they should. So they're

  • How to make netcfg2 run with regular user permissions

    when i want to run netcfg2 to connect to my wireless i always have to be superuser then run netfg2.  is there anyway to let the regular user run netcfg2?