Is it safe to update to latest version using Itunes??
hi guys I just want to know if its safe to update to the latest version using itunes and if it wont damage or delete all apps in my iphone 3g?
Since updating the iOS in iTunes is the only approved way, why do you think it might ruin or jailbreak the phone??
Updating the iOS doesn't normally delete anything from the phone but it's always best to sync and backup the phone in case something goes wrong.
See Chapter 3 and Appendix B of the User Guide:
http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf
Similar Messages
-
My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting, etc... But it still says "One of the USB decuces arrached to this omputer has malfunctioned and windows does not recognize it".
The iPod is brand new, sent to me by Apple as part of the 1st gen replacement programme. I've been using the cable that came with the 1st gen iPod (I bought the first gen second hand) It always worked on my computer with the 1st gen iPod. So I was wondering, do you think I need to replace my cable in order for my PC to recognize my iPod or is it something else?
ThanksTry a different cable. And are you connecting directly to your computer or through a USB hub?
-
When attempting to update to latest version of iTunes on my PC (11.1.4) I received an error message: Microsoft Visual C++ Runtime error as well as: AppleSync Notifier.exe - entry point not found, the procedure entry point sqlite_wal_checkpoint cound not be located in the dynamic link library SQLite3.dll.
I unistalled iTunes, then attempted to reinstall. I get to a point where I receive the following response: Service (Apple Mobile Device) failed to start.Verify that you have sufficient privileges to start system services." I'm stuck at this point and unable to proceed with install. Help please!Hi yuiopyy,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden -
unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"
Hello chae84swangin,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I'm trying to update the latest version of iTunes but my computer gives me an error saying to go to tools then download only and update manually. What do I do?
Try updating using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/ -
After update to latest version of iTunes I can not sync iTunes to iPad
after update to latest version of iTunes I can not sync iTunes to iPad
You have WiFi Sync now! Go into Settings, General, and Click Wi-Fi Sync. Sync from there!
-
I have not been able to access itunes store for over a week now. I keep getting error -1202. I have updated to latest version of itunes but problem still exists. Any tips?
See this one
https://discussions.apple.com/thread/3742260?start=0&tstart=0 -
Is it safe to update a ipsw file using itunes?
is it safe to update a ipsw file using itunes?
Why would you need to do that, when you can just click on your iPhone name in the sidebar and click Check for Updates?
-
just updated to the latest version of itunes for windows. i can't stream any of my radio stations and when i try to connect to the itunes store i get an error -3212 message saying i'm not connect to the internet, yet my browser works and my wireless status is ok.
I also had this issue when one day itunes stopped working for me on windows 8...
the error message I received first was: C:Programme files\common files\Apple\Apple Push service.dll is either not designed to run on windows or contains an error.
followed by: ITunes not installed Error 7 (Windows error 193)
Your response addressed how to fix this issue with earlier windows operating systems, but not for windows 8, so what ended up working for me was your advice applied a little differently. For anyone running windows 8 needing to know how to resolve this issue by repairing the Apple Application Support program, try following these simple steps - what a relief it was to have itunes working again after applying b noir's answer to the windows 8 operating system!
1. Swipe in from the right edge of the screen, tap Settings, and then tap Control Panel.
(If you're using a mouse, point to the lower-right corner of the screen, move the mouse pointer up, click Settings, and then click Control Panel.)
2. Click the Programs and Features icon.
3. In the list of programs and features, find the Apple Application Support feature and click to select it.
4. In the gray title bar above it, click Repair.
5. Approve the window prompts that follow until the repair has been completed.
6. Relaunch iTunes.
Hope this helps & good luck! -
Since updating to latest version of ITunes it won't share with Apple TV
Updated to the latest version of Itunes and now it will not share with Apple TV even though home sharing is turned on. Apple TV does everything but allow me to play from ITunes on my PC. I can use airplay on my IPhone 5 no problem. I can use all other Apple TV features except home sharing. Apple TV is saying basically that my ITunes does not have home sharing turned on? HELP!!!!!
Hi,
Home sharing is turned on within ITunes yet apple TV says on the computer icon that: To access your ITunes library on Apple TV turn on home sharing in ITunes on your computer using (my email address)
It is turned on?
I have so far restored Apple TV to its factory settings
Uninstalled ITunes and reinstalled it
Tried to install an earlier version of ITunes however even that says cannot use library due to being created by a later version of ITunes.
Really not sure what to do next?
Thanks -
I can't get my itunes to recognise my iphone. I have updated to the latest version of itunes.
Please help me!!!Look at the appropriate support document cor help.
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows, http://support.apple.com/kb/TS1538
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Mac OS X, http://support.apple.com/kb/TS1591 -
Problem since updating to latest version of iTunes (11.3)
Since I updated to the latest version of iTunes (11.3) a couple of weeks ago I cannot sync my iPod (Classic). ITunes does not detect the device! Anyone have any ideas??
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Suggestions for updating to latest version of itunes?
My vista windows laptop will no longer update to the latest version of itunes even though it keeps prompting me to update. When I got into itunes it won't sync anylonger with my ipdad it just won't recognize the device. I have tried to uninstall itunes and windows installer won't uninstall the program. Any suggestions on how to fix and get latest version of itunes so I can get itunes to recognize and sync with the ipad?
http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp- Utility.shtml
-
When attempting to download the latest version of iTunes I receive a message that there is no installation package found (iTunes.msi). Searching my computer, I cannot locate a file with the msi designation. Tried to use the .exe file unsuccessfully. I am unable to remove the current version for the same reason. I have a large library of music that I cannot download on my iPhone4 for the same reason.
Any suggestions would be greatly appreciated!!(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I my macbook pro will not recognize my iphone. I had the AppleStore, re-install my original software a month or two ago, but since they did this, my computer cannot recognize my Iphone it is telling me that I also need to download the new version of Itunes, but keeps telling me my system isn't running the correct software. When I go to update my software, it's telling me I'm running the latest version??? HELP!!
you need to upgrade your OSX to 10.6.8 or later to sync with the iPhone 5. as you need itunes 10.7 to run Iphone 5
Maybe you are looking for
-
Connection pool and datasource
In WL 7, we need to configure a datasource and a connection pool in order for the application to get a connection to the database. How is the datasource and connection pool related? In WL 9.2, there is no option to configure the connection pool, ther
-
Getting the name of the member on mouse up
Hi everyone! I am having images as members in my frame.What i want is to get the name of the member (image) when i click the image. I want to write a script on mouseup event of that image and should get the name of the image i have clicked, Thanks
-
Connection Problem: Can connect through Skype but browsers dont' work
Here's the hardware that I'm working on: Gateway T-6311 Notebook Intel Core 2 Duo processor I have set up an Airport utility on the PC and was able to set up wireless connection to the Airport Extreme with no issues. The problem that I now can only c
-
Instant client for Solaris AMD x64
Hi, I am desperately looking for OCI instant client for solaris AMD x64. I tried instant client download page (http://www.oracle.com/technology/software/tech/oci/instantclient/index.html) but it is not listed there. I have no idea who to contact with
-
Using new install of VS 2013 with Update 1, attempts to open two different VS2010 projects on remote dev server fail with same message.