Is it safe to use test addons on firefox?

I thinking about using this addon for firefox but i am scared that it might cause a little bit of problems https://addons.mozilla.org/en-US/firefox/addon/mibbit-browser-extension-fo/?src=search it says this add-on has been preliminarily reviewed by Mozilla.

I imagine that it is relatively low risk to use such an add-on. Note the explanatory link says:
What does it mean if an add-on is "experimental" or "preliminarily reviewed"?
Experimental add-ons have been checked by our editors to make sure they don't have security problems, but they may still have bugs or not work properly. Use caution when installing experimental add-ons and uninstall the add-on immediately if you notice problems. Learn more about our review process
Note it is easy to use Mibbit online without an add-on see:
* http://wiki.mibbit.com/index.php/FAQ (and the many links from that page)
* http://en.wikipedia.org/wiki/Mibbit

Similar Messages

  • Spilled water on MacBook Air - safe to use after a week?

    Last Friday I spilled a glass of water all over my MacBook Air's keyboard. I jumped up, tipped the laptop over to get as much water off as possible, and dried off the outside. I took it in to Apple immediately and was told it needed so many repairs, that it would cost more than the laptop itself. The guy who looked at my Air was able to turn it on, but the monitor was flickering and had horizontal lines. He took it apart and said the motherboard was fine, but I would need a new logic board, speakers, screen, etc. and said I should be able to get my files off onto an external hard drive. Since it was such a costly repair that I couldn't go for, I didn't get a list of everything that had to be replaced.
    When I got it home, I wasn't able to power it on like he could. I let it sit on my dresser all week, open and upside down, to let it dry and allow any extra water to drip out the front. Tired of looking at it, tonight I decided to try one more time and turn it on, and it did! I was able to email myself some important files that I thought I would never see again, so programs and internet worked. The monitor seemed completely fine, the brightness goes up and down normally, the speakers work, and I didn't notice any problems with the keyboard.
    It seems to be completely fine, but I'm a bit worried about whether or not it's safe to use, and if there's anything I should be looking out for. At the Apple store I was told that it needed so much, but maybe it's fine for now? If I am able to use it, should I be thinking about replacing it anyway? I'll be wanting to use it next fall for school. Sorry for the huge wall of text, I thought it would be best to know as much as possible.
    Thanks.

    That's great news. I'm not a computer guy but I am very experienced in automotive. The way I see it is even when you took it in and they cleaned it there is no way to get all the water out if it's really bad. The water will cause shorts and all kind of thing will malfunction. Now that the water is dried I would take it in and get it retested. You see, the first test they did on it was not accurate because of the water (causing it to short). Now you can get a good test. Who knows, it might be just fine. I remember drying  cars for weeks at a time. One thing to have them look for is any corrosion that might had formed. My guess (only a guess) is that if it's working good now you got really lucky and it will be fine.

  • Is it safe to use launchpad control?

    On the launchpad control wedsite it says that its discontined. Is is safe to use. I dont want to break my mac.

    So it would seem the Labview crash I mentioned in the original post is unrelated to the the mixed use of the sequence view control.  However during my troubleshooting I did notice I was missing the step of disconnecting one view from the control prior to connecting the other view. 
    And for the record I think there are a lot of things wrong with the architecture used in the full-featured example, but it also has too many features for what we need.  Just need the simple "press a button", and "run a test" for the operators.  Everybody else uses the Sequence Editor.
    All is well.  Thanks for the input.
    Kevin

  • Is it safe to use the Belkin power strip with USB ports to charge my iPad? Or is the iPad USB adapter the safest route to take when traveling with device?

    Is it safe to use the Belkin power strip with USB ports to charge my iPad?
    Or is it better to travel with the Wall Charger provided with iPad?
    Concerned about safety of the device. Thanks for your thoughts.

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • Is disc doctor safe to use

    Is Disc Doctor safe to use?

    How to maintain a Mac
    1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; make them independent of each other. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
    2. Keep your software up to date. In the Software Update preference pane, you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis. This is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible.
    3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless.
    The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
    As a rule, the only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Use your computer; don't fuss with it.
    Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve.
    The free anti-malware application ClamXav is not crap, and although it’s not routinely needed, it may be useful in some environments, such as a mixed Mac-Windows enterprise network.
    4. Beware of trojans. A trojan is malicious software (“malware”) that the user is duped into installing voluntarily. Such attacks were rare on the Mac platform until sometime in 2011, but are now increasingly common, and increasingly dangerous.
    There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
    Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must be acquired directly from the developer. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from a web page without your having requested it should go straight into the Trash. A website that claims you have a “virus,” or that anything else is wrong with your computer, is rogue.
    In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
    Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
    5. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem. While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage consumption and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
    If storage space is running low, use a tool such as the free application OmniDiskSweeper to explore your volume and find out what's taking up the most space. Move rarely-used large files to secondary storage.
    6. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
    The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

  • Is anyone using testing seeing compiler lock-ups? [SOLVED]

    As the title says, is anyone using testing seeing compiler lock-ups? I've been seeing them for about two or three days. Sometimes the system will hang for a few seconds at "Starting make" with 100% CPU usage, then will continue normally. Other times it will stop in the middle of compiling and CPU usage will drop to 0. Also, I've been seeing small hang ups with patches. Maybe four or five seconds when simple patches are being applied. Bringing MAKEFLAGS down to the default 2 from 3 seems to help a tiny bit.

    fakeroot would put it in the right time frame. I linked to your bug report Anarconda as it seems like the same problem. As always if anyone has anything to add, please do:
    http://bugs.archlinux.org/task/13699

  • How do I restore the "close tab" button to the END of the tab bar, WITHOUT USING AN ADDON

    Up until FF31, I used to have the following setting configured which moved the little 'X' button that closed tabs off of the tabs themselvs and onto the far right of the tab bar.
    browser.tabs.closeButtons; User Set; Integer; 3
    No, this no longer works. It has still moved the close buttons back to the tab buttons. Until I can figure out how to fix this, I will be moving back to a previous version. I can't for the life of me see why this feature was removed, other than Mozilla's seemingly arrogant insistence that it knows what people want better than they do.
    I was since told by someone that I can use an addon to fix it, yet the problem is THEY DO NOT WORK. The addons that supposedly solve this all have intermittent failures where they don't load correctly, leave random dead tabs open, and in one case it even seemed to open new tabs when I tried to close one.
    It's absolutely inexcusable that the dev team is so arrogant to take away a feature that has fundamentally no impact on the rest of the browser, other than, as I said before, they THINK they know what we want better than we do. It's no small wonder that FF is losing market share. The only thing keeping me on board was really this function, as I prefer this layout, and if it's gone, I see no reason to stick with FF over others.

    unfortunately it is not possible to restore the close button to have only one (customizable) close button on the Tab bar without using an extension.
    The extension is necessary because you need to create a new toolbar button and bind the proper code to it to make the button act as a tab close button (command: BrowserCloseTabOrWindow()).
    *tabs closebutton restored: https://addons.mozilla.org/firefox/addon/tabs-closebutton-restored/
    * http://cat-in-136.blogspot.co.uk/2014/05/note-do-same-without.html

  • Creating a modern Contact Form in Dreamweaver or use an addon

    Hi
    I am looking for an easy way to create a modern contact form in Dreamweaver using and addon also will be fine
    Any ideas?
    I wan to create fields:
    Email:
    Drop down: with 3 options
    Simple text box
    Notes:
    Submit button
    Thanks

    Making HTML5 Forms in DW CC (video)
    http://tv.adobe.com/watch/learn-dreamweaver-cc/html5-forms-workflow/
    Making the HTML form is easy but the form processing script which collects data & sends it to your email is not quite so simple.   Start with your web host.  Ask them if they have form-to-email processing scripts you can use.  If they don't, find out which scripts your hosting plan supports (php, asp, asp.net, perl, coldfusion, etc...)
    Nancy O.

  • Trying to modify a script to use test-connections in multiple domains?

    Hey Scripting Guy!
    I've created the script (below) to use test-connection against a list of hosts and write the results of the machines that respond to a .txt file. The only issue is that one of my sites utilizes two separate domains, does anyone have any advice as far as
    when a test connection fails, retrying the command using another domain name? (server.domain.com)
    I'll take any advice at this point... Thanks!
    New-PSDrive -Name S -PSProvider FileSystem -Root \\server\share -ErrorAction SilentlyContinue
    Get-ChildItem "S:\Folder1\Folder2\backup\backup Audits\Host Audits" -Filter *.txt | `
    Foreach-Object{
        $content = Get-Content $_.FullName
        #$SiteName = Get-ChildItem "S:\Folder1\Folder2\backup\backup Audits\Host Audits"
        #Find alive machines, and write their hostnames to output file for auditing
        Test-Connection -count 5 -ErrorAction SilentlyContinue $Content | Select-object -unique | Out-File      "S:\Folder1\Folder2\backup\backup Audits\Audit results by Site\$_"

    what i would like to do is when my test-connection fails with an error, append another domain suffix to the hostname so that if:
    test-connection computerxyz fails
    then test-connection computerxyz.domain.corp.com
    $server="$computer.domain1.com"
    if(Test-Connection $server -count 1 -quiet){
        $server="$computer.domain2.com"
        ... other code
    ¯\_(ツ)_/¯

  • ITunes 11.1.3.8, safe to use?

    Is iTunes 11.1.3.8 safe to use with Windows 7 and an iPod Classic?
    I am currently at 11.1.1.1 (and held off on that until they fixed the podcast issues) since I remember there were alot of problems with some devices no longer being recognized to sync, but I think that was mainly Win 8 or 8.1?

    Works fine for me.
    tt2

  • Boot Camp safe to use with Time Machine?

    Is Boot Camp safe to use with Time Machine? I will be installing Windows on a partition and using an external hard drive to back up. I only want the Mac partition to be backed up, though, since Windows will just be used for applications which I can reinstall if my machine messes up.

    Yes, this is perfectly safe. Time Machine won't backup the Bootcamp Windows partition.

  • Is it safe to use an 85watt adapter from a 2006, 17" macbook pro on a late 2011 15" macbook pro?

    Hi. My question is pretty much as the heading says :
    Is it safe to use an 85watt adapter from a 2006, 17" macbook pro on a late 2011 15" macbook pro?
    As far as I can tell from googling and searching around, it does appear that it is safe to do so.
    Specifically this page
    http://support.apple.com/kb/HT2346
    But I just wanted to double-check for confirmation that it is indeed safe to use the adapter from such an old mbook pro in a newer one.
    The wattage is the same.
    I wish to do so as I prefer the T-connector, and my older adapter has a much longer extension cord on it.
    If not I may order another one from ebay.
    Any idea how to check that an adapter from ebay is a true / legitimate / authentic apple adapter?
    Thanks for your help.

    Benway1 wrote:
    Is it safe to use an 85watt adapter from a 2006, 17" macbook pro on a late 2011 15" macbook pro?
    Yes.
    I recommend you buy one directly from Apple. There are many counterfeit power adapters on the market that could damage your MacBook Pro or potentially cause a fire.
    Any idea how to check that an adapter from ebay is a true / legitimate / authentic apple adapter?
    Nearly all of them are, even if the seller insists it is "genuine OEM". Legitimate adapters from eBay are likely to be used, not new. There is nothing wrong with used, as long as you know what you're getting.
    Identifying a counterfeit is possible only through close examination.

  • How to run multiple CodedUI Ordered Tests over multiple Test Agents for parallel execution using Test Controller

    we are using VS 2013, I need to run multiple Coded UI Ordered Tests in parallel on different agents.
    My requirement :
    Example:   I have 40 Coded UI Test scripts in single solution/project. i want to run in different OS environments(example 5 OS ).  I have created 5 Ordered tests with the same 40 test cases. 
    I have one Controller machine and 5 test agent machines. Now I want my tests to be distributed in a way that every agent gets 1 Ordered test to execute. 
    Machine_C = Controller (Controls Machine_1,2,3,4,5)
    Machine_1 = Test Agent 1 (Should execute Ordered Test 1 (ex: OS - WIN 7) )
    Machine_2 = Test Agent 2 (Should execute Ordered Test 2 (ex:
    OS - WIN 8) )
    Machine_3 = Test Agent 3 (Should execute Ordered Test 3
    (ex: OS - WIN 2008 server)  )
    Machine_4 = Test Agent 4 (Should execute Ordered Test 4 (ex:
    OS - WIN 2012 server) )
    Machine_5 = Test Agent 5 (Should execute Ordered Test 5 (ex:
    OS - WIN 2003 server) )
    I have changed the  “MinimumTestsPerAgent” app setting value
    as '1' in controller’s configuration file (QTController.exe.config).
    When I run the Ordered tests from the test explorer all Test agent running with each Ordered test and showing the status as running. but with in the 5 Test Agents only 2 Agents executing the test cases remaining all 3 agents not executing the test cases but
    status showing as 'running' still for long time (exp: More then 3 hr) after that all so  its not responding. 
    I need to know how I can configure my controller or how I can tell it to execute these tests in parallel on different test agents. This will help me reducing the script execution time. 
     I am not sure what steps I am missing. 
    It will be of great help if someone can guide me how this can be achieved.
    -- > One more thing Can I Run one Coded UI Ordered Test on One Specific Test Agent?
    ex: Need to run ordered Test 1 in Win 7 OS (Test Agent 1) only.
    Thanks in Advance.

    Hi Divakar,
    Thank you for posting in MSDN forum.
    As far as I know, we cannot specify coded UI ordered test run on specific test agent. And it is mainly that test controller determine which coded UI ordered test assign to which test agent.
    Generally, I know that if we want to run multiple CodedUI Ordered Tests over multiple Test Agents for parallel execution using Test Controller.
    We will need to change the MinimumTestsPerAgent property to 1 in the test controller configuration file (QTControllerConfig.exe.config) as you said.
    And then we will need to change the bucketSize number of tests/number of machines in the test settings.
    For more information about how to set this bucketSize value, please refer the following blog.
    http://blogs.msdn.com/b/aseemb/archive/2010/08/11/how-to-run-automated-tests-on-different-machines-in-parallel.aspx
    You can refer this Jack's suggestion to run your coded UI ordered test in lab Environment or load test.
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/661e73da-5a08-4c9b-8e5a-fc08c5962783/run-different-codedui-tests-simultaneously-on-different-test-agents-from-a-single-test-controller?forum=vstest
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Is it safe to use the MBP in closed clamshell mode?

    I've connected my MBP to my LCD TV and started to use it as my desktop.
    I'm deactivating the main display of the MBP by putting it into sleep mode and moving my mouse, so it wakes the computer up and shows image only in the TV, keeping the main display turned off.
    I'm constantly monitoring the temperatures of the MBP with iStat Menus. It seems that the temperature is always the same, no matter if the main display lid is open or closed.
    So, based on these 2 articles:
    http://support.apple.com/kb/HT3131
    http://support.apple.com/kb/HT1778
    Is it really safe to use the MBP with the display lid closed?
    If I decide to run a heavy load application (like a game) and the MBP starts to get warm, would it damage the display, because it is too close to the body of the MBP?

    Yes it's perfectly safe and designed to be used that way, 90% of the time this one's used in a similar configuration. The only time the fans come on 100% is when I watch Flash-based items from YouTube or similar. I've never run it for any extended length of time with the fans at maximum I must admit but as long as the air flow is good there shouldn't be any problem.

  • My 17" Macbook Pro battery swelled up and kind of exploded. The apple genuis said it is still safe to use, that doesn't sound right.

    I am just kind of worried that it doesn't even fit. Do I need to kind of pop the expanded portion of the battery to get it to fit back in? The case of the battery has come apart and so to fit it back in I would have to press it back together. The battery is low count and had great capacity when it happened. I don't want to have to buy another one when this one is fairly new.

    ... The apple genuis said it is still safe to use, that doesn't sound right.
    I agree with you, that's not right.
    This may seem to be a little problem - fix it before it becomes a big one.

Maybe you are looking for