Is it still Nano only?

I have a 30gb iPod video. I am wondering if the nike + is for nano only...if there is any way to get it onto iPod video please tell me.

If this isn't the case, please correct me.
OK.
The decision to support only the Nano has very little to do with shock, or vibration.
The Nano is supported because it's a flash-based storage device. The mini, and other iPods use a hard drive.
Since the Nike+ sensor in the show needs to constantly stream an uninterrupted flow of data to the iPod, the Nano is the only logical choice since because it uses Flash storgae and it has no moving parts. (The shuffle is also flash-based, but since it has no display and dock connector, the Nike+ product would be rather useless on it.)
The Nano can accept streamed data with limited impact on the iPod's battery. If you needed to stream data to a hard-drived based storage device, then you would be required to have the hard drive constantly spinning... which would completely destroy your battery life.
Apple is not being greedy, or playing marketing games.

Similar Messages

  • My 2 month old nano only works while charging, i've tried resetting it and still the same.

    my 2 month old nano only works while charging, i've tried resetting it and still the same.

    You are still under warranty.  Either call iPod tech support - U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273) or take the iPod Nano to an Apple store or an AASP.  Whichever is more convenient for you.

  • 7th gen Nano only works when plugged in, turns off when  unplugged... battery is fully charged.

    7th gen Nano only works when plugged into computer, as soon as I unplug it shuts off (it was ejected from iTunes). Battery is fully charged.  Have already done a restore in iTunes and checked for updated software. 

    Hello there, DizDude.
    The following Knowledge Base article offers up some good recommendations for troubleshooting battery issues with the 7th generation iPod Nano:
    iPod nano (7th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS4433
    Particularly this section:
    Battery life appears short
    Learn how to conserve battery life.
    Ensure that the latest software is installed on the iPod.
    When charging, use the cable that came with iPod nano (7th generation) and leave the device connected until it is fully charged.
    Note: If you are charging using your computer, don't connect iPod nano (7th generation) to your keyboard. Also, the computer must be turned on and not in sleep or standby mode. If iPod nano (7th generation) is connected to a computer that's not turned on or is in sleep or standby mode, the iPod nano (7th generation) battery may drain.
    When you are done using the iPod nano, verify that:
    The Radio application is off (tap the button)
    Music is paused (tap the button in the iPod application or disconnect the earphones)
    There is no active Pedometer session (tap the Stop button in the Fitness application)
    Dimming the screen is another way to extend battery life on iPod nano. Go to Settings > General > Brightness and restore the brightness to the default, or drag the slider to the left to lower the default screen brightness.
    Playing tracks with EQ requires your iPod processor to consume more energy than playing tracks without EQ, because the EQ information is not encoded in the song. To prolong battery life, turn EQ off if you don't use it. Go to Settings > Music > EQ and select Off from the list. Note, however, that if you've added EQ to tracks in iTunes, you'll need to set EQ to Flat to have the effect of Off, because iPod keeps your iTunes settings intact.
    Try restoring iPod nano (7th generation) by connecting it to iTunes and clicking Restore.
    Test the battery life.
    Issue not resolved
    If the issue is still not resolved, please read this information on servicing your iPod.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I changed language from EN-GB to EN-US but my keyboard is still British (only when using FF). How can I change it to EN-US? in English

    I changed language (based on an answer in this forum) from EN-GB to EN-US but my keyboard is still British (only when using FF). How can I change it to EN-US?
    Should I just export my bookmarks, uninstall and reinstall the proper version? That may just be shorter than anything else.

    GREAT!. Thanks a lot for educating me. There seem to be a million things we have to learn about our computers and when we run into them the first time they seem insurmountable. You pointed me to the solution. Thanks again. Ben

  • Nano only works with iTunes 4.9

    My new Nano only works if I install the software provided with it: iTunes 4.9
    If I upgrade to iTunes 5, or 5.01 it won't work. Even if I do a clean install of iTunes 5. Any clues? Thanks in advance.

    I guess obviously that's what Apple wanted to be used initially with the nano, because that's what comes with the unit.
    I had already installed 5.0 on my computer in anticipation of getting my nano. It worked right out of the box, fo me, with 5.0. A few people had problems, so the fix was to use the disc, 4.9, with the nano and it worked.
    It definitely should work with 5.0 because 5.0.1 is out already. That might be your fix. Use version 5.0.1 of iTunes and see if that works for you.

  • My new ipod nano only shows "pedometer" and "history" on the fitness screen. How do i find the run icon so i can measure distance?

    my new ipod nano only shows "pedometer" and "history" on the fitness screen. How do i find the run icon so i can measure distance when i work out?

    Try to hook up your nano to your computer and choose the dialog box to update your software.  The current version is 1.2 which allows distance to be calculated once you input your height (and weight).

  • My iPad is locked on Apple logo. Already made a restore still have only Apple logo. Any ideas?

    My iPad is locked on Apple logo. Already made a restore still have only Apple logo. Any ideas?

    Try a Restore but force the iPad into Recovery Mode first.
    Doing that involves restarting the iPad, holding the Home Button, and connecting it to iTunes.  Holding the Home Button is the trick.  Here's an article explaining how to do it.
    http://support.apple.com/kb/HT1808
    If Force Restarting and Force Restoring doesn't work, it may be time to look up warranty information.
    Good Luck.

  • Ipod nano only working in hold position

    recently my friends ipod nano only turns on when it is in the hold position but will not turn on when it's not on hold. It is also only recognized in itunes when it is in hold position. it's basically something I just store music on right now. Is there a way for me to fix this?

    I don't know if this'll work, but it's worth a shot. Try putting it hold, than taking it off of hold, without TOUCHING ANY PART OF THE CLICK WHEEL. This might work. If it doesn't, click "restore" when it is plugged in to your computer.

  • 'flagged' to 'filters off' not working.  still showing only flagged images.

    Recent issue:
    when I try to switch from 'flagged' to 'filters off', it is not working.  The app is still showing only flagged images.  I can't access my unflagged images in the gallery at all.
    I have to exit the app completely to correct issue.
    I'm using the most recent update of lightroom 5.5 from the CC.

    A couple of things to try:
    1. Exit LR and then delete the LR 5 preferences file: Preference and other file locations in Lightroom 5. On Mac, you must then reboot.
    2. In the Library Filter Bar, select Restore Default Presets:
    3. If neither of those help, take a screen shot of the entire LR screen when you have Flagged selected, and again when you have Filters Off selected.  Post these here.  In the past, some others have experienced wierdnesses in the LR filter behavior, and a screen shot might give some more clues.

  • HT1918 After seven ios updates, why is iBooks still the only app that won't synch between iphone & ipad?!?

    After seven ios updates, why is iBooks still the only app that won't synch between iphone & ipad?!?

    Hi there,
    Thanks for the reply.  I did think that could be the case but then other books would also show up as apps on phone but not counted as an app.  Maybe book apps downloaded from the app store work in this way whereas books bought from the ibooks app show in ibooks and not as apps.
    I guess that would make sense, it must be because they are books but downloaded from the app store rather than the book store so they are visible as an app but don't actually get counted as an app.
    Would you think that's the case too?
    Thanks
    Adam

  • Hi Lèonie, it is still recording only 8 minutes (more or less). I take off the 'metronomo', time is 'on', the section timing is on 'automatic'. What do you mean saying 'set the tempo to a very low value'  ? Thank you again. Ipad Retina ...

    Hi Lèonie, I tried, but it still recording only 8 minutes (more or less).
    I took off the 'metronomo', tempo is on (automatic), the section time
    is on (automatic).
    What do you mean when you say "set the tempo to a very low value" ?
    Thank you again.
    Best Regards,
    Enrico

    Enrico,
    in your previous post you said:
    GarageBand (used with a Mic microphone) is stopping to record after only 7/8 minutes.
    In which way I may record a complete concert or at least one hour of music ???
    If you want to record at least one hour of music, you need to make the max. of 320 bars last for a long time - for example:
    With a maximum of 320 bars, a song with160 bpm and a 4/4 measure will only last for 8 minutes; to make it last 32 minutes, reduce the tempo to 40 bpm.
    Léonie

  • Have tried to restore iPod twice but still showing only USB cable to be connect to iTunes..

    I have download and update iPod touch (4th generation) running firmware version 4.2.1 to iOS 5 or later through iTunes 11.1.5.5 so i have tried to restore iPod twice but still showing only USB cable to be connect to iTunes. Nothing is happening. so please tell me how to resolve it.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4
    Some users have reported as many as 8 or 9 attempts were necessary before success.
    If the issue persists...
    Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...
    Also see your other post >  After updating iOS iPod is showing only iTunes log with USB Cable..

  • What does this log mean? Fresh os install still can only safe boot

    *My head is about to explode.*
    *Last night, I pulled my old hard drive. put in new one and did fresh install.*
    *Ever confident that this would magically fix my computer.*
    *I can still only boot in safe mode.*
    *I ran AHT. everything passed. I have reseted every thing and reset logic board. yes only one push of the magic button*
    *below is a system log from before I put in new drive.*
    *however, after new drive and fresh install and still can't boot I check sytem log and still get same message:*
    *Cannot use ATS Persistent Store - switching to old FODB cache code*
    *Is this my underlying problem?*
    *What does it mean?*
    *When I try to boot up normally, I get to grey screen , spinning wheel, then wheel turns pixelly and fuzzy with random colors juist where the wheel is and the grey screen with apple logo fuzzy then black.*
    *Any words of wisdom will save my sanity.*
    Feb 11 16:10:32 sherrydesktop shutdown: reboot by louislevy:
    Feb 11 16:10:32 sherrydesktop SystemStarter748: authentication service (757) did not complete successfully
    Feb 11 16:10:33 sherrydesktop SystemStarter748: The following StartupItems failed to properly start:
    Feb 11 16:10:33 sherrydesktop SystemStarter748: /System/Library/StartupItems/AuthServer
    Feb 11 16:10:33 sherrydesktop SystemStarter748: - execution of Startup script failed
    Feb 11 16:14:42 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Feb 11 16:14:41 localhost memberd72: memberd starting up
    Feb 11 16:14:43 localhost kernel[0]: vmpagebootstrap: 1141505 free pages
    Feb 11 16:14:41 localhost mDNSResponder-108.6 (Jul 19 2007 11: 33:32)65: starting
    Feb 11 16:14:43 localhost kernel[0]: migtable_maxdispl = 70
    Feb 11 16:14:42 localhost lookupd76: lookupd (version 369.5) starting - Mon Feb 11 16:14:42 2008
    Feb 11 16:14:43 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Feb 11 16:14:43 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Feb 11 16:14:43 localhost kernel[0]: using 8192 buffer headers and 4096 cluster IO buffer headers
    Feb 11 16:14:43 localhost kernel[0]: DART enabled
    Feb 11 16:14:43 localhost kernel[0]: FireWire (OHCI) Apple ID 42 built-in now active, GUID 001124ff fe382290; max speed s800.
    Feb 11 16:14:43 localhost kernel[0]: Security auditing service present
    Feb 11 16:14:43 localhost kernel[0]: BSM auditing present
    Feb 11 16:14:43 localhost kernel[0]: disabled
    Feb 11 16:14:43 localhost kernel[0]: rooting via boot-uuid from /chosen: 334016DB-E0CA-3E86-8A4D-47576141AB26
    Feb 11 16:14:43 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Feb 11 16:14:43 localhost kernel[0]: Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@7/IOPCI2PCIBridge/k2-sat a-root@C/AppleK2SATARoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageD river/IOATABlockStorageDevice/IOBlockStorageDriver/WDC WD2500JD-41HBC0 Media/IOApplePartitionScheme/Untitled@3
    Feb 11 16:14:43 localhost kernel[0]: BSD root: disk0s3, major 14, minor 2
    Feb 11 16:14:43 localhost kernel[0]: Jettisoning kernel linker.
    Feb 11 16:14:43 localhost kernel[0]: Resetting IOCatalogue.
    Feb 11 16:14:43 localhost kernel[0]: Matching service count = 0
    Feb 11 16:14:43 localhost kernel[0]: Matching service count = 6
    Feb 11 16:14:43 localhost kernel[0]: Matching service count = 6
    Feb 11 16:14:43 localhost kernel[0]: Matching service count = 6
    Feb 11 16:14:43 localhost kernel[0]: Matching service count = 6
    Feb 11 16:14:43 localhost kernel[0]: Matching service count = 6
    Feb 11 16:14:43 localhost kernel[0]: IOPlatformControl::registerDriver Control Driver AppleSlewClock did not supply target-value, using default
    Feb 11 16:14:43 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
    Feb 11 16:14:44 localhost diskarbitrationd71: disk0s3 hfs 334016DB-E0CA-3E86-8A4D-47576141AB26 Macintosh HD desktop /
    Feb 11 16:14:44 localhost DirectoryService81: Launched version 2.1 (v353.6)
    Feb 11 16:14:45 localhost kernel[0]: UniNEnet: Ethernet address 00:11:24:38:22:90
    Feb 11 16:14:45 localhost launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"76: exited abnormally: Hangup
    Feb 11 16:14:45 localhost lookupd90: lookupd (version 369.5) starting - Mon Feb 11 16:14:45 2008
    Feb 11 16:14:48 localhost mDNSResponder: Adding browse domain local.
    Feb 11 16:14:48 localhost kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 1000 Mbps - Full Duplex
    Feb 11 16:14:48 localhost configd69: AppleTalk startup
    Feb 11 16:14:48 sherrydesktop configd69: setting hostname to "sherrydesktop.local"
    Feb 11 16:14:51 sherrydesktop kernel[0]: ATY,ChockStone_A: vram a0000000:10000000
    Feb 11 16:14:51 sherrydesktop kernel[0]: ATY,ChockStone_B: vram a0000000:10000000
    Feb 11 16:14:51 sherrydesktop configd69: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
    Feb 11 16:14:51 sherrydesktop configd69: posting notification com.apple.system.config.network_change
    Feb 11 16:14:51 sherrydesktop lookupd95: lookupd (version 369.5) starting - Mon Feb 11 16:14:51 2008
    Feb 11 16:14:53 sherrydesktop configd69: target=enable-network: disabled
    Feb 11 16:14:54 sherrydesktop configd69: AppleTalk startup complete
    Feb 11 16:20:47 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Feb 11 16:20:44 localhost memberd57: memberd starting up
    Feb 11 16:20:47 localhost kernel[0]: vmpagebootstrap: 1138664 free pages
    Feb 11 16:20:44 localhost mDNSResponder-108.6 (Jul 19 2007 11: 33:32)50: starting
    Feb 11 16:20:47 localhost kernel[0]: migtable_maxdispl = 70
    Feb 11 16:20:46 localhost lookupd64: lookupd (version 369.5) starting - Mon Feb 11 16:20:46 2008
    Feb 11 16:20:47 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Feb 11 16:20:47 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Feb 11 16:20:47 localhost kernel[0]: using 8192 buffer headers and 4096 cluster IO buffer headers
    Feb 11 16:20:47 localhost kernel[0]: DART enabled
    Feb 11 16:20:47 localhost kernel[0]: FireWire (OHCI) Apple ID 42 built-in now active, GUID 001124ff fe382290; max speed s800.
    Feb 11 16:20:47 localhost kernel[0]: Security auditing service present
    Feb 11 16:20:47 localhost kernel[0]: BSM auditing present
    Feb 11 16:20:47 localhost kernel[0]: disabled
    Feb 11 16:20:47 localhost kernel[0]: rooting via boot-uuid from /chosen: 334016DB-E0CA-3E86-8A4D-47576141AB26
    Feb 11 16:20:47 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Feb 11 16:20:47 localhost kernel[0]: Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@7/IOPCI2PCIBridge/k2-sat a-root@C/AppleK2SATARoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageD river/IOATABlockStorageDevice/IOBlockStorageDriver/WDC WD2500JD-41HBC0 Media/IOApplePartitionScheme/Untitled@3
    Feb 11 16:20:47 localhost kernel[0]: BSD root: disk0s3, major 14, minor 2
    Feb 11 16:20:47 localhost kernel[0]: HFS: Removed 3 orphaned unlinked files
    Feb 11 16:20:47 localhost kernel[0]: Jettisoning kernel linker.
    Feb 11 16:20:47 localhost kernel[0]: Resetting IOCatalogue.
    Feb 11 16:20:47 localhost kernel[0]: Matching service count = 0
    Feb 11 16:20:47 localhost kernel[0]: IOPlatformControl::registerDriver Control Driver AppleSlewClock did not supply target-value, using default
    Feb 11 16:20:47 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
    Feb 11 16:20:48 localhost diskarbitrationd56: disk0s3 hfs 334016DB-E0CA-3E86-8A4D-47576141AB26 Macintosh HD desktop /
    Feb 11 16:20:49 localhost DirectoryService65: Launched version 2.1 (v353.6)
    Feb 11 16:20:50 localhost kernel[0]: UniNEnet: Ethernet address 00:11:24:38:22:90
    Feb 11 16:20:52 localhost mDNSResponder: mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 01808800 lo0/4 to 224.0.0.251:5353 skt 9 error -1 errno 65 (No route to host) 306010061
    Feb 11 16:20:52 localhost mDNSResponder: mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 01808800 lo0/4 to 224.0.0.251:5353 skt 9 error -1 errno 65 (No route to host) 306010061
    Feb 11 16:20:53 localhost mDNSResponder: mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 01808800 lo0/4 to 224.0.0.251:5353 skt 9 error -1 errno 65 (No route to host) 306010311
    Feb 11 16:20:53 localhost kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 1000 Mbps - Full Duplex
    Feb 11 16:20:53 localhost configd54: AppleTalk startup
    Feb 11 16:20:53 sherrydesktop configd54: setting hostname to "sherrydesktop.local"
    Feb 11 16:20:55 sherrydesktop kernel[0]: ATY,ChockStone_A: vram a0000000:10000000
    Feb 11 16:20:55 sherrydesktop configd54: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
    Feb 11 16:20:55 sherrydesktop kernel[0]: ATY,ChockStone_B: vram a0000000:10000000
    Feb 11 16:20:55 sherrydesktop configd54: posting notification com.apple.system.config.network_change
    Feb 11 16:20:55 sherrydesktop lookupd75: lookupd (version 369.5) starting - Mon Feb 11 16:20:55 2008
    Feb 11 16:20:58 sherrydesktop mDNSResponder: Adding browse domain local.
    Feb 11 16:20:59 sherrydesktop /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
    Feb 11 16:21:00 sherrydesktop configd54: AppleTalk startup complete
    Feb 11 16:21:00 sherrydesktop configd54: target=enable-network: disabled
    Feb 11 16:21:04 sherrydesktop loginwindow113: Login Window Started Security Agent
    Feb 11 16:21:17 sherrydesktop /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/ATSServer: (-3230) Cannot use ATS Persistent Store - switching to old FODB cache code

    thank you thank you for taking an interest. this is so frustrating.
    i only have apple keyboard, mighty mouse, and 20 inch cinema display connected. this morning took out memory and tried to boot up with individual pairs in the first bank. first the (2)256, the (2) 1g, and then the other (2) 1g modules. everytime I get the weird fuzzy wheel under the logo after a while, black screen flashes, then grey apple logo fuzzy screen then black forever.
    I ran tiger updates this morn. still will only boot to safe mode. then tried to run leopard disk to install it
    will not boot from leopard disk.
    tried safe boot, then doulble click install leopard, restart, then the saga repeats with the pixely red square around the wheel.
    these are fresh drives with only what came on instll disk loaded.
    thanks again for taking an interest.
    i love this system(well at least i did). I want to install leopard on my powerbook too but am terrified to do so right now since it is working and I have work to do. Can't afford to have no computer to do my work on...self employment is great?!
    This is making me crazy. I anxiously await your words of wisdom.

  • Ipod Nano only sincing fraction of songs before Error (-69) apperars.

    Ipod Nano only sincing fraction of songs before Error (-69) apperars. Stating unknowwn error. Says it cannot copy to disk?? Not trying to copy to disc.

    Found this: http://support.apple.com/kb/HT1210
    Im not familiar with it myself tho'. Apparantly a file is unusable.
    Message was edited by: slothofms7

  • I have restored my iphone 3gs after having only the apple logo, it took me through all the restore, a page saying 'congrats your phone is now unlocked', and allowed me to chose to set up from new or back up....yet still displays only the apple logo.

    I have restored my iphone 3gs after having only the apple logo, it took me through all the restore, a page saying 'congrats your phone is now unlocked', and allowed me to chose to set up from new or back up....yet still displays only the apple logo.

    Restore as New...
    Redownload your Purchased and Free Apps using the Apple ID you Originally used...
    iPhone User Guide
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Maybe you are looking for