Is it supported to use shared mailboxes in SharePoint 2013 Workflows?

We try to send an email to a shared mailbox (Exchange 2007) from a workflow in SharePoint 2013. No errors are shown in the workflow but the message does not arrive in the mailbox. If we do the same with an user mailbox it works.
Both Exchange and SharePoint are on-premises.
Is it supported to use shared mailboxes in SharePoint 2013 Workflows?

If it is a mailbox then mail should be delivered.
Please check if mail is in C:\Inetpub\ pickup or drop folder
also check if emails to normal mailbox works fine

Similar Messages

  • Does performance point support effective username on https in sharepoint 2013

    I see that analysis services effective username is supported from Sharepoint 2013.
    In Central admin==> manage services==>Performance point service app there is a note saying effective user name is not supported in https or powerpivot. 
    But in the technical documentation it says only about power pivot http://technet.microsoft.com/en-us/library/jj219741.aspx but
    not about https
    My question is does performance point support effective username on https in sharepoint 2013
    Raj-Shpt

    Hi Raj,
    Please check if the following articles (e.g. mentioned "Use Encryption for Data") are what you want, and you may
    also post this question in
    SSAS forum for a better assistance.
    http://msdn.microsoft.com/en-us/library/dn140245.aspx#bkmk_auth
    http://www.c-sharpcorner.com/UploadFile/chinnasrihari/sharepoint-2013-productivity-services/
    Thanks
    Daniel Yang
    TechNet Community Support

  • Has any one worked on sharepoint 2013 workflows using visual studio.

    Has any one worked with sharepoint 3013 workflows using visual studio.

    Hi,
    To develop SharePoint 2013 workflow using Visual Studio, you can refer to:
    Develop SharePoint 2013 workflows using Visual Studio
    Create a SharePoint workflow app using Visual Studio 2012
    Get started with workflows in SharePoint 2013
    Thanks,
    Linda Li                
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

  • As i am fresher Please share the doc of ECMA script using java script in SharePoint 2013 also how we can insert,update,delete records in list using ECMA script.

    As i am fresher Please share the doc of ECMA script using java script in SharePoint 2013 step by step also how we can insert,update,delete records in list using ECMA script.
    Thanks and Regards, Rangnath Mali

    Hi,
    According to your post, my understanding is that you want to use JavaScript to work with SharePoint list.
    To create list items, we can create a ListItemCreationInformation object, set its properties, and pass it as parameter to the addItem(parameters) function
    of the List object.
    To set list item properties, we can use a column indexer to make an assignment, and call the update() function so that changes will take effect when you callexecuteQueryAsync(succeededCallback,
    failedCallback). 
    And to delete a list item, call the deleteObject() function on the object. 
    There is an MSDN article about the details steps of this topic, you can have a look at it.
    How to: Create, Update, and Delete List Items Using JavaScript
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Create SharePoint 2013 workflow using visual studio 2013

    Dear Team,
    How  to create a workflow for template approval process using visual studio 2013.To achieve this do i need to install share point on my machine.

    Hi,
    According to your post, my understanding is that you want to create a SharePoint 2013 workflow using Visual Studio 2013.
    We need setting up and configuring Microsoft SharePoint Server 2013 and the Workflow Manager Client 1.0 server, see Start:
    Set up and configure SharePoint 2013 Workflow Manager.
    The following materials for your reference:
    Develop SharePoint 2013 workflows using Visual Studio
    http://msdn.microsoft.com/en-us/library/office/jj163199(v=office.15).aspx
    How to: Create SharePoint 2013 Workflows using Visual Studio
    http://msdn.microsoft.com/en-us/library/office/dn584771(v=office.15).aspx
    Developing SharePoint 2013 workflows with Visual Studio demo
    http://www.bing.com/videos/watch/video/developing-sharepoint-2013-workflows-with-visual-studio-demo/10t0er5gh
    Best Regards
    Dennis Guo
    TechNet Community Support

  • Opening a shared mailbox in Outlook 2013 (office 365) returns "Cannot Expand Folder" error.

    Hi!
    We've just upgraded from our old Domino email server to Office 365 E1 and running an on-premise Exchange 2013 hybrid server.
    In Outlook 2013, when trying to expand a shared mailbox, It asks me to enter my outlook credentials. Trying so doesn't work and it continues to ask repeatedly. If I click cancel, I get the following error:
    "Cannot expand the folder. The set of folders cannot be opened. Microsoft Exchange is not available.
    Either there are network problems or the Exchange server is down for maintenance."
    The error only occurs in Outlook 2013 and it happens to all staff who are using Outlook 2013. Shared mailboxes are accessible in Outlook 2010 and OWA with no issues.
    I have tried recreating profiles, removing and re-adding permissions, disabling auto-mapping. I've tested with creating shared mailbox in Exchange Online and on our hybrid server.

    Hi,
    Check if the kb below matches your scenario:
    https://support.microsoft.com/kb/2992644
    This problem occurs only when the following conditions are true:
    You are using Microsoft Outlook 2013 client version 15.0.4641.1001.
    The client is connected by using Outlook Anywhere (RPC over HTTP).
    To resolve this issue, apply the update that is described in the following article in the Microsoft Knowledge Base:
    2889859
    If you are using the Click-to-Run version of Office 2013, the Outlook application is kept up to date automatically. For more information about Office 2013 Click-to-Run updates, see
    Microsoft Office 2013 Click-to-Run virtualization
    I hope the information is helpful.
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • How to make Rule to get notification for Shared Mailbox on Outlook 2013

    Hi All, is anyone have idea how to make rule on Outlook 2013 to get notify if you receive new email from your "Shared Mailbox".
    Is it possible that make a Rule for that notification? I have outlook here and I can't see notification when I receive new emails. Hope anyone can help me how to do this.

    Assuming the mailbox is open in outlook as a shared mailbox, you can use a macro to watch the folder: 
    Private WithEvents Items As Outlook.Items
    Private Sub Application_Startup()
      Dim Ns As Outlook.NameSpace
      Set Ns = Application.GetNamespace("MAPI")
      Set Items = GetFolderPath("Accounting\Inbox").Items
    End Sub
    Private Sub Items_ItemAdd(ByVal Item As Object)
      On Error Resume Next
    MsgBox "new message  from " & Item.SenderName & " in shared folder"
    End Sub
    Diane Poremsky [MVP - Outlook]
    Outlook & Exchange Solutions Center
    Outlook Tips
    Subscribe to Exchange Messaging Outlook weekly newsletter

  • Using Excel 2010 with SharePoint 2013 Excel services

    Hello:
    What features are we missing when using Excel 2010 (rather than Excel 2013) with SharePoint 2013 Excel services?
    Regards
    Jeff Gorvits

    Hi Jeff,
    You might want to read the articles below:
    https://support.office.com/en-us/article/Whats-new-in-Power-View-in-Excel-2013-and-in-SharePoint-Server-8e3b4259-421e-41fc-a48e-854388ad14d0?ui=en-US&rs=en-US&ad=US
    https://support.office.com/en-us/article/Version-compatibility-between-Power-Pivot-Data-Models-in-Excel-2010-and-Excel-2013-188f44fd-3cfd-4aa7-b4e6-a9402653cbf3?ui=en-US&rs=en-US&ad=US
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • Document Set Creation in document library using REST API in Sharepoint 2013

    Hi,
    I want to create the document set using REST API call. Currently i am able to create the folder and able to upload the files using REST API's in the document library. Is there any way we can pass the contentype name or Id and create the document set using
    REST API call. We need to create the document set along with metadata and upload the files inside the document set.
    I need to create the document set along with meta data column values using REST API. Please let me know how we can achieve this through REST API.
    Thank you,
    Mylsamy

    Hi,
    According to your post, my understanding is that you wanted to create document set along with managed metadata fields.
    The REST API does not currently support working with Managed Metadata or Taxonomy fields.
    As a workaround, we can use the JavaScript Client Object Model.
    Create document set using JavaScript Client Object Model.
    http://blogs.msdn.com/b/mittals/archive/2013/04/03/how-to-create-a-document-set-in-sharepoint-2013-using-javascript-client-side-object-model-jsom.aspx
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/aacd96dc-0fb2-4f0d-ab4c-f94ce819e3ed/create-document-sets-with-javascript-com-sharepoint-2010
    Set managed metadata field with JavaScript Client Object Model.
    http://sharepoint.stackexchange.com/questions/95933/add-list-item-with-managed-metadata-field-through-jsom
    http://sharepointfieldnotes.blogspot.com/2013/06/sharepoint-2013-code-tips-setting.html
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

  • Access local shared folder through Sharepoint 2013

    Before we installed Sharepoint 2013 everyone within the company was sharing files and folders through a shared drive that is mapped to all the workstations. This shared folder on the server is very large, roughly 250gb in size. 
    I created a Sharepoint site called Document center using a Sharepoint template. Is there an easy way to either upload all those files and directories int sharepoint?
    Or even easier, create a link on the sharepoint site that can connect to this shared drive so users can access these files.

    You can use a data migration tool from a 3rd party, such as Metalogix, Metavis, AvePoint, or ShareGate to migrate file share content into SharePoint with the metadata (created by, last modified, etc.) intact. You can also use WebDAV (\\sharepointsite\) and
    copy them in, but the metadata will be lost.
    As far as integrating the file share into SharePoint, take a look at AvePoint's File Share Integration tool (http://www.avepoint.com/assets/pdf/doc6/DocAve_Connector_for_SharePoint_File_Share_Integration.pdf). This is the only one I'm aware of.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Getting error while publishing workflow using SP designer for SharePoint 2013

    Hi,
    I am try to setup Workflow manager for our sharepoint applications.
    WF manager set ran without any issue.
    I registered the SPWorkflow service which succeeded as well. The Workflow service application shows "Workflow is connected"
    I am creating a workflow using sharepoint designer using my credential (not Service account). I am able to save it but while publishing, its prompting with an error.
    The error says "Errors were found while compiling the workflow.The workflow files were saved but cannot run." Clicking advanced button show
    "Microsoft.SharePoint.SPException: We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator.
       at Microsoft.SharePoint.SPScaleOutDatabaseMap.CreateSqlSession(ISPScaleOutDatabaseMapProvider mapProvider, Byte[] compositeKey, Guid forceRefreshVersion, Guid& version)
       at Microsoft.SharePoint.SPScaleOutDatabaseCommandExecutor.Execute(ExecuteDelegate operation, ISPScaleOutDatabaseMapProvider mapProvide"
    Any help would be highly appreciated
    Thanks,

    Hi,
    According to your post, my understanding is that you got error while publishing workflow using SharePoint designer for SharePoint 2013.
    Please check whether the Central Admin > Manage Service Application-> “App Management Service” is started.
    Please check whether the “Configure service application associations”,  ”App Management Service” is already associated.
    Then please check whether the “Manage Services on server” and the “App Management Service” is started.
    In addition, please try to re-register Workflow Service.
    If the issues still exists, please follow the steps in the
    Steps to Verify that Server Is Correctly Set Up. After you verified that the server is correctly set up, follow the steps in the
    Steps to Troubleshoot Workflow Management Service and
    Troubleshooting the Service Bus for Windows Server then retry your action related to publishing workflows
    More information:
    http://wp.ahcheng.com/2013/03/23/error-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
    http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • How to fetch Properties of all Survey Lists from site collection using Java Script in SharePoint 2013

    Hi,
    I am trying to fetch properties of all lists of "Survey Type" from my site collection in SharePoint 2013 using script editor web part. I am able to fetch properties of one list by mentioning its name explicitly in code but not all survey
    list.
    My task is to display Survey name , description ,Time created and URLs of all survey lists using java script in script editor web part.
    And let me know , if there is any other OOB feature of SharePoint 2013 to achieve the same. 
    Here is the code  :
    <script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
    <script type="text/javascript">
    SP.SOD.executeFunc('sp.js', 'SP.ClientContext', sharePointReady);
    function sharePointReady() {
         GetSurveyList();
     function GetSurveyList() {
            var spListTitle = " List Name";
             var clientContext = new SP.ClientContext.get_current();
            var oWeb = clientContext.get_web();
            this.surveyList = oWeb.get_lists().getByTitle(spListTitle);
            clientContext.load(surveyList);
            clientContext.executeQueryAsync(Function.createDelegate(this, this.GetListProperties),Function.createDelegate(this, this.onFailure));
     function GetListProperties() {
            $("#SurveyList").text("");
            var surveyTable = "<table border=1>";
            surveyTable = surveyTable.concat("<tr><td>Survey Name</td>");
            surveyTable = surveyTable.concat("<td>Survey Description</td>");
            surveyTable = surveyTable.concat("<td>Time Created</td>");
            surveyTable = surveyTable.concat("<tr><td>" + surveyList.get_title() + "</td>");
            surveyTable = surveyTable.concat("<td>" + surveyList.get_description() + "</td>");
            surveyTable = surveyTable.concat("<td>" + surveyList.get_created().format("MM/dd/yyyy hh:mm tt")+ "</td>");
                 surveyTable = surveyTable.concat("</table>");
            $("#SurveyList").append(surveyTable);
        function onFailure(sender, args) {
            alert('Request failed. ' + args.get_message() + '\n' + args.get_stackTrace());
    </script>
    <div id="SurveyList"></div>

    Shifa,
    Please use search result webpart or content query webpart to list all survey list.
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • Join two list with condition using caml query in SharePoint 2013 with client object model

    Hi,
    Want to join two list to get all fields from both list.
    Am new to sharepoint and sharepoint 2013. Am working in sharepoint 2013 online apps. Am using context.executeQueryasync to load list and get items from list. Am able to get items from single list with caml query, but not able to get both list field values
    with joins.  I did lot of surfing..but not..
    Below is my code..
    ListName1 : "AssignedTasks"
    ListName2 : "Tasks"
     var assignedQueryTest = "<View><Joins><Join Type='INNER' ListAlias='Tasks'><Eq><FieldRef Name='TaskId' RefType='Id'/><FieldRef List='Tasks' Name='ID' /></Eq></Join></Joins>"
                    + "<ViewFields><FieldRef Name='TitleValue' /><FieldRef Name='ActionItemsValue' /></ViewFields>"
                    + "<ProjectedFields>"
                    + "<Field Name='TitleValue' Type='Lookup' List='Tasks' ShowField='Title' /><Field Name='ActionItemsValue' Type='Lookup' List='Tasks' ShowField='ActionItems' />"
                    + "</ProjectedFields>"
                    + "</View>";
                   var web = context.get_web();
                    var list = web.get_lists().getByTitle("AssingedTasks");
                    var myQuery = new SP.CamlQuery();
                    myQuery.set_viewXml(assignedQueryTest);
                    var myItems = list.getItems(myQuery, "Include(TitleValue,ActionItemsValue)");
                    context.load(myItems);
                    context.executeQueryAsync(function () { if(myItems.get_count()>0){....}
    }, errorCallback);
    Here am able to get "AssignedTasks" list field values but not able to get "Tasks" list field values. 
    Can you please help me to resolve the issue. Or new idea for join. I have add the condition also in the query.
    If anybody have good sample, please provide.
    Thanks,
    Pariventhan
    Pariventhan.S

    Hi Pariventhan,
    I don't know about join but I have a workaround of this problem.
    Declare one variable (itemcollection) globally. Load all the items "AssignedTasks" using context.load.
    In the success method call another CAML query using <IN> tag of the ID of the items from the second list (Assuming you have look-up column of the ID of the first list to the second list).
    If this is not clear to you then please let me know. If possible then I can provide code sample.
    Thanks,
    Aniruddha

  • Create & Start UPS Service Using Power-Shell in SharePoint 2013

    I want to know that is there a way to create a User Profile Synchronization Service using Power-Shell in a SharePoint 2013 Enterprise site? If so then how am I supposed to do that and start the User Profile Synchronization Service using the Power-Shell.
    I'm seeking this help because the UPS service is stuck in Starting and both FIM Services are also not started but they are in Automatic start mode.
    Could someone try to solve this matter.
    Thanks,
    regards,
    Chiranthaka

    start it from powershell will not help you resolve the issue.
    Try below articles:
    http://myspexp.com/2011/04/28/user-profile-synchronization-servicehangs-on-starting-i-fixed-it/
    troubleshoot this issue:http://www.harbar.net/articles/sp2010ups2.aspx
    http://www.sharepointdiary.com/2012/09/user-profile-synchronization-service-stuck-at-starting.html#ixzz2aXArH7zX

  • Programmatically use distributed caching in SharePoint 2013?

    As per below TechNet article, developers are not allowed to use the AppFabric instance that comes with SharePoint 2013. The expectation is to deploy a seperate AppFabric cluster for custom applications.
    http://technet.microsoft.com/en-us/library/jj219572.aspx#Important
    Distributed caching was a long waited, nice SharePoint feature but it does not make sense to restrict developer access to this. We have a requirement to cache fairly smaller amount of data (must be distributed), but cannot deploy a separate Cache servers
    for this. What are my options (other than System.Web.Caching)? Is there an API to safely cache smaller amount of data? What is the rationale behind restricting access to default AppFabric instance come with SharePoint?
    Thanks in Advance,
    Amal

    Yes, it's just a thread-safe implementation of object cache and not a distributed cache. Probably the reason behind recommending to use a separate AppFabric cache cluster is that additional named caches of custom solutions and applications will
    interfere with SharePoint  named caches. Without a scope and priority defined, the named caches of custom solutions may start evicting SharePoint items if their usage is much higher than that of SharePoint ones.
    AppFabric Caching and SharePoint: Concepts and Examples (Part
    1)
    This post is my own opinion and does not necessarily reflect the opinion or view of Slalom.

Maybe you are looking for