Is It Too Late to Create a Version Set?

I have several photos that I edited and saved, but I did not save them as version sets. Now I would like to convert each of them to a version set -- the edited photo on top of the original photo. Is it too late to do that?
Thanks for any suggestions.

Sorry, I forgot to mention the details -- I'm using PSE8 on a laptop with Win7 (64bit).
Yes, my terminology is confusing because I'm fairly new to this and not exactly sure what I'm doing. I am following the example of an Adobe technician who led me through a process whereby I could move photos from one catalog to another. I have 5 catalogs, two of which contain many thousands of photos each. The other 3 catalogs are more specialized and thus smaller. My Flower Catalog, for instance, contains a couple thousand pictures.
This is my routine: I download my photos into one of the larger catalogs (File>Get Photos from Card Reader). If I have a photo of a flower in the group, I edit it and save it in a version set or stack. Then, in order to "move" it to the Flower Catalog, I select and copy it (Ctrl+C). Then, in Explorer, I open the Flower Catalog and paste it. Then, when I return to PSE8 and open the Flower Catalog (a watched folder), I get the message that a new photo has been found and do I want to add it to the browser. (This photo, unfortunately for me, is not the version set or stack but only the top, edited, photo.) I add it to the browser. The properties show that its location is now in the Flower Catalog. Then I go back to the larger catalog and delete the flower photo from that catalog (not the hard disk).
A convoluted system, but it works except for keeping the version set or stack intact.
Does anyone have a better, foolproof way of moving a file from one catalog to another? Especially a way that will keep the version set or stack together?

Similar Messages

PSE 12.1 not saving in version set

I have been successfully using PSE 12.1 on Windows 7 since last August. However I've started having problems in the last 2 or 3 days. I start the Organizer and select a photo to edit. When I "save as" I get one of two results. In the first case it saves the photo in the proper folder but it does not create a version set with the original. In the second case, the editor locks up and eventually I get a message saying the editor is not responding and windows is looking for a solution. Usually it saves one photo as in case one above, and then fails to respond on the second photo and I shut it down. Over the past 2 days I have uninstalled PSE 12 and reinstalled 3 times, upgrading to 12.1 each time., but I get the same result. Any ideas what is causing this?
Update: I've given up. Uninstalled for the last time; purchased PSE 13; everything working with new version.
Message was edited by: Margaret Thompson

27Prac a écrit:
This is odd . Did you tried with clean preferences. To clean preferences go to "Edit Menu>PReferences>General" and click the button "Reset Preferences on next launch". Relaunch PSE.
This is not new, already several posts on this forum and one bug report:
http://feedback.photoshop.com/photoshop_family/topics/save_in_version_set_not_working_in_p se12
See:
http://forums.adobe.com/message/5766588#5766588
Today's state of the problem seems to be that this happens not only with saving in version sets in PSE12, but also on simple saves with 'include in the organizer' checked.
It happens on previously converted catalogs, not on new ones.
It happens when the process 'elementsautoanalyzer.exe' is running (you can 'kill' it from the Windows task bar, but you must do it every time you start the organizer. Deleting or renaming this file seems to work.)
This seems also to be a problem for people using the 'watched folders'.
So, to prevent the problem : kill the elementsautoanalyzer.exe every time you start the organizer.
To recover the edited files not included in the catalog, do a manual 'get photos and videos' from the already gotten files.
It's important to do so, otherwise the edited files won't be catalogued and be missing if you do a backup.
If necessary, use the automatic stacking feature by visual similarity to stack your originals with your edited versions, since you can't create version sets.
If you can share your experience on the above feedback link, please do it and add your vote.

PSE 11 - How disable Save in Version Set

How can I default the Save in Version Set checkbox to unchecked so I do not have to remember to uncheck it when I save. I _never_ want to create a version set. Thanks.

I don't think you have an option to disable "save in version set".

PSE 4 (WinXP): Version set not working

I have about 7000 thumbnails in my catalogue. Just recently I have had a problem when creating a version set - I get something like a catalog error (sorry, I didn't write it down when it happened - I think it's a DBA error?) and the original thumbnail is displayed only in the Organiser, without a version set icon in the corner. The new jpeg is still saved, it just doesn't show in the version set, or the catalogue at all. Furthermore, when I 'get' new photos from the folder I saved the jpeg in, I get an ODBC error - again, apologies that I can't transcribe it: I checked the 'don't want to see any more' box pretty quickly. So the new jpeg I created is somehow both in and 'not in' the catalogue.
Help is appreciated.

Thanks! I might not have found that feature for years. Or might have found it previously, and forgotten it was there . That allowed me to import the new thumbnails to the catalogue, but not repair the version set.

Version set of duplicate photos mac pse10

Just imported the first batch of pictures into my Mac PSE10 organizer and noticed it created a version set with one duplicate photo in a stack. This is just certain photos it has done this with. Anyway to turn this feature off. After importing, it ask if I would like to go ahead a visual index the imported photos which i selected ok.
Also upon importing I noticed that it was performing red eye reduction. It seemed to slow down the whole importation process.
I guess I have some preferences adjusting to do here? Thanks in advance

99jon wrote:
Version sets are an option upon saving files after eaditing.
mac pse10
under preferences/files
turned off automatically fix red eye and automatically suggest photo stacks.
Now it is importing without a version set which probably was an auto red eye edit. After reviewing the photos, in my opinion, the auto red eye edit does not work very well. Probably better to correct manually rather than have randon version sets upon import. Not worth the trade off in the organizer.
Thanks again for your responses 99jon

Too Late for Mac OS Extended Journaled??

Hi guys! So i got a another firewire HD, 250GB by acomdata. It's formatted under FAT 32 for both windows and mac, after after reading several posts, it's best to format it under mac os extended. the problem is I already put about 30 GB of files on it. Is it too late for me to reformat it? do i have to remove all the files, then do it? If someone can provide step by step instructions that won't harm my files, I'd greatly appreciate it. Thanks!

You understand that if you reformat the drive for Mac OS Extended that you will no longer be able to use the drive on a PC?
If you do reformat the drive you need to do so as follows:
1a (If this is the startup drive.) Boot from your OS X Installer Disk. After the installer loads select Disk Utility from the Installer menu (Utilities menu if using Tiger.) Be sure to use the installer disk for the version of OS X you intend to install.
1b (If this is a non-startup volume or external drive.) Open Disk Utility in the Utilities folder of your Applications folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.

After upgrading from acrobat 9.5 to XI pro my users have complained on slow typing when filling in form that were created in version 9.5?

After upgrading from acrobat 9.5 to XI pro my users have complained on slow typing when filling in form that were created in version 9.5?
The issue is they type but there is 2 second delay when it appears in the field.
Windows 7 64bit

I see, I misread your reference to Reader 11 to mean you were using Acrobat 11, but it looks like it worked out anyway.
The base-14 fonts are special in PDF because they are guaranteed to be available even if they are not embedded. If you select a non-base-14 font for use with a form field, the entire font usually gets embedded, since each glyph it contains has to be available for use with the field. This can take up a lot of space if you do this a lot, and the space isn't reduced if you change back to a base-14 font later because the internal reference to it is not removed. This is caused by the bug I mentioned.
In your case, however, the entire font doesn't get embedded because fonts like it (e.g., large asian fonts with a lot of glyphs, Arial Unicode) would take up too much space if fully embedded. If it did, a 100KB PDF could bloat to 20MB with that one change. Instead, users are expected to have such fonts installed on their system, which is why you were prompted to install the font pack. This despite the fact that the font was not actually used by anything in your document, it was simply the orphaned reference to it that triggered this. This should get fixed in Acrobat eventually so this type of thing doesn't happen again.

Replacing library using "Create AAC Version."

I would like to replace my music with AAC verions, using the "Create AAC Version" option in the right click context menu.
Normally when you do this you end up with two of each song, the original and converted version.
I would have to select every original version manually and remove them.
Is there a better way to do this?

ahightechtyler wrote:
Is there a better way to do this?
Yes, but perhaps I am too late...
See https://discussions.apple.com/message/22022622#22022622 The current version of the script deletes the original files. I've been thinking about making a version that archives the files to some sort of parallel "Old Media" folder instead of deleting them entirely, just in case you discover the converted tracks aren't good enough after all. Would you be interested in that version?
tt2

When I Googled MacKeeper, several items warned against downloading it. Too late! In order to reverse the process, I'm told I need to unencrypt anything that was encrypted. How do I unencrypt? Thanks so much.

When I Googled the word MacKeeper, several items that appeared warned against downloading this item. Too late! I've already downloaded it.
I was told that, before reversing the download, I needed to unencrypt anything that was encrypted. How do I do this?

Remove "MacKeeper" as follows. First, back up all data.
"MacKeeper" has only one useful feature: it deletes itself.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Then a dialog will pop up asking why you want to uninstall it. You don't have to provide that information. Enter anything you like in the text box, then click the Uninstall MacKeeper button. All the functional components of the software will be deleted. Reboot.
Do not empty the Trash after dragging the MacKeeper application to it. Let the application delete itself.
Do not try to uninstall by dragging the MacKeeper icon in the Dock or the LaunchPad to the Trash.
Here are some general suggestions. If you want your computer to be usable, don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
The only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Never install any third-party software unless you know how to uninstall it.

My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou

My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

How can I create multiple versions of a video within the same project?

OK...this is a probably a very basic question but I'm not sure how to word it clearly.
How can I create multiple versions of a video within the same project? What I mean is that I have a bout 50 minutes of video and I want to make two DVDs using different clips from this original 50 minutes of footage. It would be a real pain to have to re-import the video AGAIN for the second DVD. I suppose I could drop anything I don't want to burn to DVD back into the clips pane but that would wipe out all my transitions wouldn't it? I want to save each project in their “raw” form so I can burn additional DVDs later otherwise I would just do them one at a time and not care about one of them being destroyed.
Wow...that was a mess. Does anyone understand what the heck I’m asking? I hope so.

How can I create multiple versions of a video within the same project?
You can't. You make separate projects using the same or different clips, segments, transitions, titles, etc. You can even duplicate the first project and then modify/make the desired changes in the duplicated project. Each project can then be burned as a different DVD or as different titles on the same DVD if there is enough room.

Aperture creating new version of image for each adjustment applied!

To anyone out there who can sort this one out, I will be forever grateful!
Here's the problem. I'll be jamming away in Aperture, adjusting photos like a madman. After adjusting a random number of photos (it usually varies between 5-30 photos or so after starting Aperture each time), the adjustments panel will no longer update when I click on a new image (i.e. it holds the info from the last image I adjusted and will continue to apply new adjustments to that last image even if another image is highlighted). If I switch to the metadata panel and then back to adjustments it will refresh itself and recognize the currently selected image (although I have to do this for EACH image I want to adjust once it starts acting up like this). The BIG problem is that even if I get the adjustments panel to recognize the selected image at this point, for EACH adjustment I apply it makes a new version of the image. For example, if I first change the contrast, it will make Version 2 of the image and select it (which is what it's supposed to do for the first adjustment, because I have "create new versions when making adjustments" checked in my preferences), but if I then make another adjustment like changing the saturation, it makes Version 3 of the image (from the master, so that only the saturation adjustment is applied and not the contrast adjustment). As you can imagine, this utterly destroys my once incredibly efficient Aperture workflow and makes it pretty much impossible to use Aperture for adjustments unless I turn off "create new versions when making adjustments" in the preferences, at which point it does seem to work again (although I've only tried it on a few images, so not 100% sure it will work properly even then). If I restart Aperture (or my computer), it will work normally again for a few pictures and then will start acting up again with the same problem.
Originally I was running into this problem on my PowerBook G4, and so I figured it was just because Aperture didn't like my wussy G4 processor and was acting up when the load got too heavy (after all, the adjustments would work fine for up to 30 images or so). However I recently purchased a sexy iMac 24" 2.8 GHz and maxed out the RAM to 4GB, but I'm still getting the same darned problem with Aperture on my iMac. Yes, I'm using the same library of photos I was using on my PowerBook G4.
This problem has been plaguing me for about 3 months now (everything else in Aperture works fine so I'm still using it to import and organize my photos, I just haven't been able to make adjustments on large groups of pictures for a while), and I've searched and searched these forums countless times to see if anyone has run into similar problems, but I've not seen a single mention of it. I've also tried EVERYTHING mentioned for similar problems (rebuilding library, vacuuming database, erasing com.apple.aperture.plist preference file, repairing permissions, reinstalling Aperture, making burnt offerings to Steve Jobs), and NOTHING is working. ARRGH!!
For those who might have some words of wisdom to offer this delighted-***-miserably frustrated Aperture user, here are a few more details about my setup:
I have a library of about 37,000 photos, the vast majority of them being RAW .CRW files from a Canon 10D. The 25GB library file is stored on my internal hard drive, and all photos are referenced from an external LaCie 500GB FireWire 400 hard drive. I have a LOT of export plug-ins installed in Aperture, but no image adjustment plugins. I have generated previews turned off for all projects. I've had the same problem on both my PowerBook G4 and new iMac 24" 2.8 GHz. One other thing worth mentioning is that instead of upgrading from 2.1 (which was already giving me this problem) to 2.1.2, I downloaded the full version of 2.1.2 and installed it. I noticed that my 2.1 Aperture.app file was less than 100MB, whereas the 2.1.2 Aperture.app file is over 300MB. Don't know if that's normal or not.
The only other thing I can think of to try at this point is to load a new library into Aperture and import a large group of pictures and make adjustments to them to potentially see if my problem is being caused by Aperture or by the library. Will probably try that tomorrow.
I would appreciate any advice or feedback anyone can offer about this nasty little problem, as it's giving me a serious hormonal imbalance.
THANKS!

Thanks for the reply RB, but my current workflow depends on me creating new versions when I make adjustments. I suppose as a temporary solution I will probably have to either turn this preference off or just be willing to constantly restart Aperture. At least I finally found another thread with the same problem, so finally I don't feel completely alone in the far reaches of the Aperture universe. For anyone who is interested, here is the link to that thread:
http://discussions.apple.com/thread.jspa?messageID=8555067
It appears this problem is closely related to the ubiquitous black viewer problem that seems to be plaguing far more users than my issue (although I've run into the black viewer problem a few times myself), as both problems force Aperture to output the following message to Console:
Main Thread Exception in Aperture: * -NSCFArray objectAtIndex:: index (1) beyond bounds (1)
It seems that both of these problems existed in Aperture 1 and 1.5 up until the 1.5.6 upgrade which seems to have fixed it, but then with Aperture 2 the problem seems to have returned. At least that's the gist of what I've been reading on a number of threads. Whatever the case, I hope Apple gets this sorted out in their next update!
As it appears there is no proper answer to this problem at the moment, I'm gonna go ahead and mark this thread answered (and since you were kind enough to at least take the time to reply RB, you can be credited with the answer... thanks!).

In the new iTunes you no longer have the 'create iPod version' or 'create Apple TV version,' for converting movies. Will this feature return..?

After installing the new itunes, I inserted some video files, and wanted to create a version for my iPod classic. Before, I could just click on the video and then select 'create iPod version' from the menu. It would then convert the file. However, this feature no longer exist. Is there another way I can easily convert my files?

David,
You've probably sorted kahlia_1's problem too! https://discussions.apple.com/thread/4613451?tstart=0

Create AAC Version failing in iTunes 8 for large files

Hi,
I'm having trouble converting a few large (1gb+) MP3 files to AAC versions.
The files are Audiobooks which have been ripped from CD, then merged into a single MP3 file (with a track CUE file created so I can add the chapter marks and create a final resulting M4B file).
The MP3 files are all encoded at 44.1KHz sample rate, 64Kbps bitrate, Mono audio. When converting anything under 1GB (using iTunes' Create AAC Version option), it seems to convert fine, however as soon as I try a file over 1GB it seems to start as expected, then get approx 2/3rds through, then restart. the restart however, does not start from the beginning, it starts from the point where it had got to. The resulting M4A file is corrupt and unplayable.
Am I doing anything wrong here, or is there some sort of size/length limitation on AAC encoded audio in MP4 containers?
On a side note, I have set the AAC import options to 44.1KHz, 64KBps bitrate, Mono audio, but this does not seem to be adhered to when converting an MP3 file, instead taking whatever settings iTunes seems to think as right...

Hi,
That software looks to be working perfectly so far - not only has it changed me from using three tools to do what this one does on its own, but it's also the first that's given me a clue as to why the other tools were failing!
When I first got it to convert the chaptered MP3 files across to AAC, it came up with a warning message saying something along the lines of "The audio files you have queued are a total of x,xxx,xxx,xxx frames long, which is longer than the AAC standards can accomodate. The following tracks will be removed...". Looks like it wasn't the filesize at all, but the bitrate was too high, and went over the file's limits that way instead.
Quick note on the settings: I tried the iTunes standard "64K Podcast" settings first of all, but the sample rate got set to 22K, which caused the speech to go all robot-like, and the S's slurred. Had to bump it back up to 44K (with 32K stereo bitrate, set to mono so 16K overall).
Overall, a very useful tool, thanks Chris!

I am trying to watch Prof. Susskind's video lectures from Stanford univ.U-tube lec work fine.With itunes video and audio have synch problem.Is there a way to fix this or the people who uploaded messed up and it is too late?

I am trying to watch Prof. Susskind's lectures from Stanford Univ. U-tube lectures work fine.With I-tunes, there is a synchronization problem between audio and video. Is there a way to fix this or the people who uploaded messed up and it is too late?

I had thought this situation was solved but it just got worse. In addition to being without service for several days I am now being charged a cancellation fee for a broadband service that BT disconnected in error. BT Vision was also terminated by BT but the set up charges are still in place. Does anyone know who the relevant Ombudsman is? I called BT from America on Friday - for an hour - while someone called Aruj sorted out why there is an order 'in progress' that I didn't initiate; why I have fees relating to a problem created by BT and why there are references to a house move that didn't take place and a BT Vision service I no longer have but didn't cancel myself. He assured me it would be rectified and my bill would be reduced by 139 pounds and we would get confirmation of this later that day. I asked him what chance there was that this would not actually happen - he said no chance at all; my new bill would be 23.50.
There was no text message. An online chat person today told me there had been a fee reduction request which had been declined and there was nothing else he could help me with as he dealt only with broadband. But he would get BT Vision to email me. They always seem so helpful.............
I'm sure I'm listed somewhere as 'a problem', there's no other explanation for why I get the runaround

Is It Too Late to Create a Version Set?

Similar Messages

Maybe you are looking for