Is it true? My 4 x 2.5 Ghz PowerPC G5 will not work with CS5 ?

im in a state of shock that technology has gotten to the point where i have to buy a NEW mac to work with 2 computers as im used to
in addition to my other intel MAC pro to work with the new pshop CS5?
tell me this isnt true?
the installer says it wont work on this architecure on my PowerPC
but installed and loaded fine on the Mac pro.
im obsolete?

caustic waltz wrote:
CS5 is indeed nice. But it's not worth having to buy a new machine to
run it and being forced to put up with Snow Leopard. Who knew that
Apple could come up with something even worse than Leopard!
And many rational thinkers agree. The features in CS 5 are not a need to have, but there are backwards compatibility things that shall sting the lower release users if a CS 5 users gives files to them.
I've been using Photoshop since version 5, and I have never been in a situation when I was handed a processed Photoshop file from anybody, nor can I even imagine ever being in such a situation in the future.
99.9% of the time I am concerned with my own files. If I ever work on someone else's file, it is either a raw file or a flattened PSD or TIFF.
What's more, I still deal with large numbers of scanned film negatives and will do so until I die. Adobe bought and killed the undisputed best software to manage film grain, as opposed to digital chroma noise, Grain Surgery, from its developer, Visual Infinity. The last version of Grain Surgery runs only on a PPC or under Rosetta, so CS5 is simply out of the question—by virtue of Adobe's own fiat.
Wo Tai Lao Le
我太老了

Similar Messages

I just downloaded Firefox 5 and it said that my Yahoo toolbar will not work with it. Is this true? If so I will not use this new version and will switch to another browser if Firefox stops supporting the Yahoo toolbar. Thank you.

I just downloaded Firefox 5 and it said that my Yahoo toolbar will not work with it. Is this true? If so I will not use this new version and will switch to another browser if Firefox stops supporting the Yahoo toolbar. Thank you.

Add-ons contain a range of compatible Firefox versions, and Firefox honors the listed range by disabling the add-on if you are trying to run it on an unlisted version.
I'm sure Yahoo! will update its toolbar eventually, but not every add-on maker supports beta versions of software.

Security Issue httpOnlyCookies="true" is not working with production environment

Dear All,
I have tired to make set cookie value as httpOnly
The development environment is working fine and give me an output like that
Set-Cookie
WSS_KeepSessionAuthenticated={3644d93c-d1d3-46cd-845f-42c01640ab21};
path=/;
HttpOnly
But when implement the same changes in web.config production environment its not working
Set-Cookie NLSessionCdomainweb=a98q9jnsy0vXk5+RHeHnlKmM+HnneA9KmhIAR6g1bJiwTs8sD6d7dfV1gBffc8HiJXBowxdO8LhZAiIEKiFY6PzNWySyRs5rvgCfPu8XIFnqKcN4XQ4UL9PN3JI3f4E6;path=/;domain=.domain.com
I am using sharepoint 2010, under web.config i made the following changes
Add following tags under system.web
<httpRuntime maxRequestLength="2097151" enableVersionHeader="false"
/>
<httpCookies httpOnlyCookies="true"/>
Add following tags under <system.webServer>
  <httpProtocol>
      <customHeaders>
               <remove name="X-Powered-By" />
             <remove name="MicrosoftSharePointTeamServices" />
      </customHeaders>
    </httpProtocol>
Can any one tell me why it's happening i have checked all possible reasons from my side but no success
Regards
Rashid Bilgrami
RB

Hi,
From your description, I know you want to set cookie value as httpOnly but it is not work.
Please try to add codes below to your global.asax file:
<SCRIPT language="C#" runat="server">
protected void Session_Start(Object sender, EventArgs e)
try
if (Request.IsSecureConnection == true)
                Response.Cookies ["ASP.NET_SessionId"].Secure = true;
catch (Exception)
</SCRIPT>
Please refer to this article:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/0fe55c13-3911-422e-af17-cb5c1ab2abd7/missing-secure-httponly-flags-on-sharepoint-2010-cookie?forum=sharepointadminprevious.
Best Regards
Vincent Han
TechNet Community Support

Is it true that keep options is not working with paragraph span? (CS5)

Hi all,
Just wanted to confiem that keep options does not work with Paragraph span.
thanks,
shlomit

That's correct for now. Perhaps in CS6....

Random songs in my music library will not play with an error message "computer does not have access rights" but this is not true. I do, and when I re-type the password, it tells me I already have access rights. How do I fix this?

When I try to play songs from itunes, I get an error message that my computer is not authorized. My songs have all played in the past. This is something new. I verified my computer is authorized, and when I try to re-enter the password, it tells me that I am already authorized. Makes no sense at all. It's an endless circle. Also, my shuffle will not sync due to access rights denied. I did nothing new, I always take the updates. My shuffle and compter are the same, no changes. Everything is verified in my itunes account. For some reason, it is blocking me from half of my music. Help!

It's an endless circle.
See if these instructions help: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

False/True Case is not working. Please Help!

Dear all,
I attached my block diagram, one attachment refers to true case and the other refers to false case.
My program runs like this: when i run the vi , after homing the motor (there is home.vi), DAQ is collecting the values in the while loop, and according to the DAQ's value, motor should run the False/True case but it does not
As a result: true/false case is not working which is located at the outside of the loop(bottom side of the block diagram)
When i put the the True/false inside the Loop(DAQ's loop) , then it is working. But this brings lots of problem, two of them is:
1-) When the DAQ values goes below to "50" then it turns to true case again,
2-) The false case has stop.vi which cause to motor stop every iteration of the loop.
So that is why i put True/False case out of the loop but now it is not working at all.
Please answer, waiting response.
Thank you,
Have a nice day,
Kind Regards.
Attachments:
OutloopTrueMode.pdf ‏432 KB
OutofLoopNotWorking.pdf ‏443 KB

Salander wrote:
Dear GerdW,
Thank you for reply, You can see my answers written with red.
"As long as the case structure is located outside the loop it will not be called before the loop stops. THINK DATAFLOW!"
- The case structure need to run same time with the loop, because as you can see from the attachments the case structure is also integrated with DAQ values.. loop is continuous till i press the stop button. So what i understand that this case structure will not work because loop is continuous?? Cant we upgrade the vi. or do smthg that it can be able to work same time with the loop??
Kind Regards.
You have to place the case structure inside the while loop ( Any significance is there on placing the case outside the loop? ).
Salander wrote:
Dear GerdW,
Btw. it would be much more useful to attach real pictures or, even better, the VI...
Because most of the people dont have my "motor controller's labview drivers" I attached as a PDF file which is very popular.
Not Really * .png file ( vi snippet ) is much more popular here in Discussion Forum
The best solution is the one you find it by yourself

True caller is installed but not working please let me know the setting.

i installed true caller in my 5s but the caller id is not working and its not showing caller detail while i received any unknown calls.

Contact the developer of true caller for assistance.
Be advised that certain wireless providers do not send the information
needed for caller ID when the caller has blocked his number or is spoofing
it.

Flash Builder buttonMode = true not working

Hi, I am having a really strange issue where I can't get any hand cursors to come up in Flash Builder. Anybody else have this problem. I ran into a situation where I've had to convert a ton of Flash Builder projects just to get the hand cursors to come up. Weird this is if I open the swf's in Flash the hand cursors will show up. Once they get on the web though, though don't work. It's almost as if the buttonMode property will not work in swf's compiled in Flash Builder. I've tried with Flash Builder 4 and 4.5 and no luck. I told a friend, and he didn't believe me. So I asked him to just do a simple test in Flash Builder to create a Sprite and add it to the stage, add a click listener, and set it's buttonMode to true. He has the same problem, no hand cursor. I've even tried to set useHandCursor true with buttonMode, etc.... to no avail. Any help? Thanks!

If you are viewing your files in Firefox, this is a known bug:
http://support.mozilla.com/en-US/questions/796828

My iPhone 4s iOS 7.0.4 will not update music or apps from iTunes 11.1.3. this was true of my pc and the new MacPro.

My iphone 4s ios 7/0/4 will not update music or apps from itunes 11.1.3. this was true with my pc since ios 7.0.3 even with update 7.0.4 and now continues with my new MacPro also runing itunes 11.1.3. as most state in previous threads, syncs all non itunes related data with no issue and appears to work correctly on itunes data but then hangs on the last step of updating until it times out. i have tried marking specific music to transfer, setting up new playlist, deleting some old playlist on phone but stopped short of restoring my phone back to new due to the amount of non itunes data that i will lose. The itunes setup on the macpro was completely with the download of all music from a previous external backup and the creation of new playlist - on the first sync with existing phone it did ask to overwrite all phone itunes data with macpro itunes data which i did accept - no different result - no changes on phone.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the problem continues, take the device to Apple for evaluation and possible replacement.

Rtexprvalue true does not work

I write a tag ,it works well( tomcat 5.5 ,jdk5):
     <u:repeat num="5">
               ${count} of 5<br>
          </u:repeat>
     <%
          request.setAttribute("number",2);
     %>
but when I use it like this:
          <u:repeat num="${number}">
               ${count} of 5
          </u:repeat>
i got the error:
NumberFormatException: For input string: "${number}"
It seems the rtexprvalue does not work at runtime.
tag class:
import javax.servlet.jsp.JspException;
import javax.servlet.jsp.tagext.SimpleTagSupport;
import java.util.HashMap;
import java.io.IOException;
public class RepeatSimpleTag extends SimpleTagSupport {
     private int num;
     public void doTag() throws JspException, IOException {
          for (int i = 0; i < num; i++) {
               getJspContext().setAttribute("count", String.valueOf(i + 1));
               getJspBody().invoke(null);
     public void setNum(int num) {
          this.num = num;
TLD:
     <tag>
          <name>repeat</name>
          <tag-class>boc.common.tags.RepeatSimpleTag</tag-class>
          <body-content>scriptless</body-content>
          <variable>
               <description>Current invocation count (1 to num)</description>
               <name-given>count</name-given>
          </variable>
          <attribute>
               <name>num</name>
               <required>true</required>
               <rtexprvalue>true</rtexprvalue>
          </attribute>
     </tag>
then I change the code to:
     public void setNum(String num) {
          this.num = Integer.parseInt(num);
still got the error
org.apache.jasper.JasperException: Exception in JSP: /WEB-INF/jsp/spring/userauth.jsp:22
19:           request.setAttribute("number",2);
20:      %>
21:
22:           <u:repeat num="${number}">
23:                ${count} of 5
24:           </u:repeat>
25:           <u:repeat num="5">
Stacktrace:
     org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:504)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
root cause
java.lang.NumberFormatException: For input string: "${number}"
     java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
     java.lang.Integer.parseInt(Integer.java:447)

I set <el-ignored>true</el-ignored>
change it to false and all is ok

I am trying to print a fillable form. It will not print and I get two error messages "document could not be printed" and "there were no pages selected to print." Th latter is not true. Won't print all, the page I am on, nor any series of pages inserted

I am trying to print a fillable form - - an application for a Chinese visa. It will not print and I get two error messages: "document could not be printed" and "there were no pages selected to print." The latter is not true. Won't print at all, the page I am on, nor any series of pages inserted.
Am using a MAC desktop and a Cannon PIXMA MX922 printer.
I need to print this form now that it is filled out? What can I do?

Hello PW, I am having this problem and all suggestions haven't worked yet. Where is the Preferences|Documents you are referring to? I am on a PC and using Windows.
EDIT: I found it and did, but still not working.

I just purchased Acrobat and it says it is not compatible with Windows Vista. Is this true?

I just purchased Acrobat and it says it is not compatible with Windows Vista. Is this true?

Hi joe beischel,
Kindly post this query in Acrobat forums:Acrobat
Regards,
Florence

SetRendered(true) not working for an LOV

Hi,
I have a dropdown(soc1) in my page which has three values : A, B and C. Below that drop down are three LOVs (say ilov1, ilov2 and ilov3), which are to be rendered dynamically based on the values selected from the dropdown. i.e. if I select A, then ilov1 has to be rendered, if I select B then ilov2, if I select C then ilov3 has to be rendered. I have used the below piece of code in a backing bean :
I have set the rendered property for ilov1, ilov2 and ilov3 as false in my jsff page. And I have set AutoSubmit property to true for soc1.
The below method is invoked through the valueChangeListener when I select a particular value from a drop down (soc1).
*public void setRendered(ValueChangeEvent event){*
String str = (String)valueChangeEvent.getNewValue();
*if (str.equalsIgnoreCase("A")) {*
getIlov1().setRendered(true);
getIlov2().setRendered(false);
getIlov3().setRendered(false);
*} else if (str.equalsIgnoreCase("B")) {*
getIlov1().setRendered(false);
getIlov2().setRendered(true);
getIlov3().setRendered(false);
*} else if (str.equalsIgnoreCase("C")) {*
getIlov1().setRendered(false);
getIlov2().setRendered(false);
getIlov3().setRendered(true);
AdfFacesContext.getCurrentInstance().addPartialTarget(ilov1);
AdfFacesContext.getCurrentInstance().addPartialTarget(ilov2);
AdfFacesContext.getCurrentInstance().addPartialTarget(ilov3);
If I debug the code, I can see the control passing through this method in the desired manner. It is executing the above code correctly as per the condition provided. But the Lov is not rendered on the page.
Can anyone please let me know the solution for the above problem ?
Thanks in advance.
-Kavitha

Thanks John. This worked. Am just curious to know why it didnt work with Rendered. Any particular reason ?
-Kavitha

Want to set mailto for google apps;tried editing the gecko...mailto.2.uritemplate as per instructions found on web; set 3 related config values to "true" as per instructions; does not work; tried javascript method without success

I want to set the mailto app for google apps gmail.
I tried editing the gecko...mailto.2.uritemplate as per instructions found on web (https://mail.google.com/a/MYDOMAIN/mail/?extsrc=mailto&url=%s.
Set 3 related config values to "true" as per instructions (network.protocol-handler.expose.mailto ; network.protocol-handler.warn-external.mailto ; AND, third, gecko.handlerService.allowRegisterFromDifferentHost.
Does not work, no Google Apps in the mailto app spot.
Tried javascript method in address bar without success:
javascript:window.navigator.registerProtocolHandler("mailto","https://mail.google.com/a/MYDOMAIN/mail/?extsrc=mailto&url=%s","Google Apps GMail")
Any light anyone can shed will be appreciated. Cheers, jlf

Great howto Steve! This further increased my understanding of the MVC patterns used by BC4J.
Some remarks:
[*]Select New Business Components...
This should be 'New Business Components Package', or you won't be able to add business components.
ename as "Name",
sal as "Salary"
from emp
where empno = ?That should be deptno.
[*]Select the EditEmpsInDepartment view objectThat should be EmpsInDepartment.
Greetings,
Ivo

I am in process of unlocking my iphone and need to restore my phone backed it up already but ituenes will not let me restore keeps telling me ituenes can not get on the internet no connection with is not true cause otherwise you would not have gotten this

I have contacted at&t and they did what was nessary to unlock my phone was told to backup my phone and did that so know I just need to restore my phone with ituens which ituenes will not let me do cause I get message can not connect to cause of no internet connection wich is not true cause other wise you would not have gotten this

Try restoring the iPhone to factory settings. If you are having difficult restoring, put the iPhone into Recovery Mode and see if that then works:
http://support.apple.com/kb/ht1808
If not, or if a restore to factory settings does not fix the problem, then your iPhone may have a hardware problem. You can only get the iPhone serviced by Apple in Canada, so you will have to take the iPhone there or send it to someone you know in Canada who can get the iPhone serviced and send it back to you. The only option for getting service in Pakistan would be to pay some unauthorized repair shop to attempt a repair, after which Apple will no longer provide any service even in Canada.
Regards.

Is it true? My 4 x 2.5 Ghz PowerPC G5 will not work with CS5 ?

Similar Messages

Maybe you are looking for