Is it true that Pages cannot insert a page into the middle of a document?
Is it true that Pages cannot insert a page into the middle of a document?
I have tried this many times using different techniques and it just refuses to do it. Can anyone help?
To see how Pages works:
Menu > View > Page Thumbnails
When you click on the thumbnails each Section is outlined in yellow.
Click where you want a new page > Menu > Insert > Section Break
But then to have a new page all you need to do is add content to fill the page or Insert > Page Break to force the insertion point over onto a new page.
Peter
Similar Messages
-
Hi,
After moving my files from SP 2010 to SP 2013 , for all my web parts i am getting A webpart or web form control on this page cannot be displayed or imported.The type could not be found or it is not registered as safe. error. I checked web.config files
and they are there as safe control and trust level is also full.
These webparts work in 2010.
Do i need to tweak something in code or distributed cache to make this thing work? The errors i see are
Error importing WebPart. Assembly c , Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29, TypeName. C. A Web Part or Web Form Control on this Page cannot be displayed or imported. The type c Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29
could not be found or it is not registered as safe.
Getting Error Message for Exception Microsoft.SharePoint.ApplicationRuntime.SafeControls+UnsafeControlException: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type C Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29
could not be found or it is not registered as safe.
at Microsoft.SharePoint.WebPartPages.WebPartImporter.CreateWebPart(Boolean clearConnections)
at Microsoft.SharePoint.WebPartPages.WebPartImporter.Import(SPWebPartManager manager, XmlReader reader, Boolean clearConnections, Uri webPartPageUri, SPWeb spWeb)
at Microsoft.SharePoint.WebPartPages.WebPartGalleryItemBase.InstantiateFromXml(XmlReader reader)
at Microsoft.SharePoint.WebPartPages.WebPartAdder.SiteWebPartGalleryProvider.SiteWebPartGalleryItem.Instantiate()
at Microsoft.SharePoint.WebPartPages.WebPartGallerySourceBase.AddItemToPage(WebPartZoneBase zone, Int32 zoneIndex, WebPartGalleryItem item, String wpid)
at Microsoft.SharePoint.WebPartPages.WebPartAdder.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
An error occurred while attempting to add the gallery item [Custom] c to the page. The error was: Microsoft.SharePoint.ApplicationRuntime.SafeControls+UnsafeControlException: A Web Part or Web Form Control on this Page cannot be displayed or imported. The
type c Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29 could not be found or it is not registered as safe.
at Microsoft.SharePoint.WebPartPages.WebPartImporter.CreateWebPart(Boolean clearConnections)
at Microsoft.SharePoint.WebPartPages.WebPartImporter.Import(SPWebPartManager manager, XmlReader reader, Boolean clearConnections, Uri webPartPageUri, SPWeb spWeb)
at Microsoft.SharePoint.WebPartPages.WebPartGalleryItemBase.InstantiateFromXml(XmlReader reader)
at Microsoft.SharePoint.WebPartPages.WebPartAdder.SiteWebPartGalleryProvider.SiteWebPartGalleryItem.Instantiate()
at Microsoft.SharePoint.WebPartPages.WebPartGallerySourceBase.AddItemToPage(WebPartZoneBase zone, Int32 zoneIndex, WebPartGalleryItem item, String wpid)
AditHi Adit,
According to your description, my understanding is that the error occurred when you deployed the .wsp files to SharePoint 2013.
I recommend to check if all the assemblies are put into the BIN and GAC.
If above cannot work, you can check the troubleshooting steps in the link below:
http://www.bluedoglimited.com/SharePointThoughts/Lists/Posts/Post.aspx?ID=189
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
I'm in a multi-page Pages document, how can i rearrange the pages or insert blank pages in front of pages? Also, is there a way to show the ruler both horizontally and vertically?
Not on my document. I have a 7 page document open. The "flashing vertical bar" is at the top of page 3. I have the thumbnail view showing. I click page break and two blank pages are added to the end of my document. I have to scrool thru the pages to see that the 2 pages were added as they do not appear in the layout view... I'm not sure if it is inserting a "section" as it adds two blank pages.. But I am clicking on "INSERT PAGE BREAK".. So guess there are still a lot of bugs to fix..
Thanks again -
Cannot insert Chinese character into nvarchar2 field
I have tested in two environments:
1. Database Character Set: ZHS16CGB231280
National Character Set: AL16UTF8
If the field type of datatable is varchar2 or nvarchar2, the provider can read and write Chinese correctly.
2. Database Character Set:WE8MSWIN1252
National Character Set: AL16UTF8
The provider can not read and write Chinese correctly even the field type of datatable is nvarchar2
I find that for the second one, both MS .NET Managed Provider for Oracle and Oracle Managed Data Provider cannot read and write NCHAR or NVARCHAR2 fields. The data inserted into these fields become question marks.
Even if I changed the NLS_LANG registry to SIMPLIFIED CHINESE_CHINA.ZHS16CGB231280, the result is the same.
For the second situation, only after I change the Database Character Set to ZHS16CGB231280 with ALTER DATABASE CHARACTER SET statement, can I insert Chinese correctly.
Does any know why I cannot insert Chinese characters into Unicode fields when the Database Character Set is WE8MSWIN1252? Thanks.
Regards,
JasonHi Jason,
First of all, I am not familiar with MS .NET Managed Provider for Oracle or Oracle Managed Data Provider.
How did you insert these Simplified Chinese characters into the NVARCHAR2 column ? Are they hardcoded as string literals as part of the SQL INSERT statement ? If so, this could be because, all SQL statements are converted into the database character set before they are parsed by the SQL engine; hence these Chinese characters would be lost if your db character set was WE8MSWIN1252 but not when it was ZHS16CGB231280.
Two workarounds, both involved the removal of hardcoding chinese characters.
1. Rewrite your string literal using the SQL function UNISTR().
2. Use bind variables instead of text literals in the SQL.
Thanks
Nat -
Outlook 2013: Cannot insert any attachments into calendar events & tasks
Hi,
I encountered a seemingly ridiculous problem:
I cannot insert any attachments into calendar events & tasks in
Outlook 2013 on a Win 8.1 machine. Outlook simply ignores CTRL-V paste actions with files and also all drag&drop actions with files. Does anyone have a solution or similar problems?
Outlook 2013 runs using an exchange server account (Outlook.com / Office 365) on the machine.
Even if there is a logic behind this behavior, Outlook should at least inform the user why it rejects inserting the attachment.
Inserting attachments into e-mails works fine.
All 3rd party add-ins have been disabled, to avoid interference of an add-in.
ChristianHi,
This is an known issue, you can refer to the article that our MVP Diane Poremsky wrote:
Attachments are hidden in Outlook.com tasks and appointments
http://slipstick.com/outlook/olc-hotmail/attachments-hidden-outlookcom-tasks-contacts-appointments/
My opinion is, since Outlook.com calendar doesn't support attachments, this may be expected when you are using an Outlook.com account.
Feel free to let me know if I misunderstood anything.
Regards,
Melon Chen
TechNet Community Support -
I saved my Form Central spreadsheet file once as a excel file but Forms Central will not allow me to save the file a second time as an excel file. I am informed that I cannot complete this action because the file me be open in another application, but it is not open in another application. What is the problem, and how do I solve the problem. Thank you. Jeff
First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
You can find it here:
[Ann] Identify Your InDesign File
If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
In regards of the script showing a result for InDesign files higher than CS6:
CS7 = CC v9
CS8 = CC v10 = CC-2014 or CC2014.1
Uwe -
I gave my iPhone 4s today in geneva apple store, the replaced it to a new one. Yesterday i made a synchronization that i cannot find today to synchronize the new iPhone. Is it possible to have all my iPhone content again ???
yes i can see the old ones..... but all summer i synchonised my iphone.....
where to find the backups, where else from itunes
thanks -
Pages app unexpectedly quit whilst I was in the middle of a document. I can now not open it AT ALL. I find it's not just that particular document that won't open, but any of my Pages docs will not open using the current version of Pages. The reports of the app unexpectedly closing each time, automatically went to Apple, but I am not sure what happens with them then. Does anyone know how to help me with this? We live in a very isolated region so rely on internet help. Thanks
I also managed to read a few other discussions about Pages and files not being able to open. I actually went to the last back-up and restored the computer from that and everything seemed to work ok again, which is great!...advice from another discussion I think you may have been involved in PeterB. Thanks for the advice...also this advice, as I will make a note of trying to open using the Shift key if it happens again and see what happens...might be an easier first option than restoring from a back-up. Thans heaps for the help!
I was interested to read some of the other discussions where it was stated that Pages '09 seems to be a better option to use. I have both installed, so I will lkeep this in mind. Thanks heaps! -
Insert Multiple rows into the table from that table data
Hi All,
I have a requirement like to insert mulitple rows into the table from that table data only(I need to replicate the data).
In this table primary key is composite primary key with all foreign keys.primary key also including the Date foreign key.I need to change that date at the of insertion.
INSERT
INTO myschema.Fact_page_performance
time_sk ,
batch_id ,
delta_msec ,
delta_user_msec,
error_code_sk ,
content_errs ,
element_count ,
page_bytes ,
Available ,
date_sk
VALUES
(SELECT time_sk ,
batch_id ,
delta_msec ,
delta_user_msec,
error_code_sk ,
content_errs ,
element_count ,
page_bytes ,
Available
FROM myschema.FACT_PAGE_PERFORMANCE_BACKUP
WHERE date_sk=20090509,20090510
But it is giving the error like missing Expression.
Could anyone please help to me.
Thanks and Regards
Swetha.You can have either VALUES or SELECT not both
INSERT
INTO myschema.Fact_page_performance
time_sk ,
batch_id ,
delta_msec ,
delta_user_msec,
error_code_sk ,
content_errs ,
element_count ,
page_bytes ,
Available ,
date_sk
SELECT time_sk ,
batch_id ,
delta_msec ,
delta_user_msec,
error_code_sk ,
content_errs ,
element_count ,
page_bytes ,
Available
FROM myschema.FACT_PAGE_PERFORMANCE_BACKUP
WHERE date_sk=20090509,20090510; -
i have my photoshop cc installed on my Mac and my windows laptop is it true that I can only use one or the other now? and if this is the case if my mac were turned off should my laptop now work? I am on the photoshop photography program its just that i have never noticed tho before i have my mac turned on and the laptop PS works fine on the Mac but not on the Laptop
Hello,
see >>> http://helpx.adobe.com/creative-cloud/help/install-apps.html here >>> How many computers can I install on
I quote: You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each.
If you install on a third computer, it will request you to de-activate on the other two computers. You can then reactivate one of the previous two computers, and use Creative Cloud apps on it.
Good luck!
Hans-Günter -
I have photos and photo folders on my iPhone 4s that I cannot delete ? I created the folders and now it seems there is no way to get rid of them
It seems that app was downloaded with the Apple ID that keeps popping up. Delete the app and redownload it.
-
It is true that Weblogic 10.3 does not support the 1.2.840.113549.1.1.11?
It is true that Weblogic 10.3 does not support the 1.2.840.113549.1.1.11. - SHA1 with RSA signature encryption?
Refer: Re: SSL not working with 10.3 and jdk 1.6.0_13
-Akshay -
Shop told me that i cannot change my iphone4s because The warranty is out from Humidity..
My problem is the power button cannot press...
but I went to the shop
Shop told me that i cannot change my iphone4s because The warranty is out from Humidity..
I think it's not fair for me,
My iPhone never been soak the water before..
I think I used it in Thailand ,, it's tropical weather...
that's not my false ..
so why i cannot change?
Please tell me the good reasons.
ThanksHere is the article about it:
iPhone and iPod: Liquid damage is not covered by warranty
Since we are all users here just like you, we can't do anything about decisions made by Apple.
You'll have to pay for a replacement:
Out-of-Warranty Service
If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
iPhone model
Out-of-Warranty Service
iPhone 5
$229
iPhone 4S
$199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone
$149
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.
When setting up out-of-warranty service, Apple will request credit card pre-authorization for the maximum service fee listed above. This amount will be deducted from your credit limit. The final service fee we charge will be determined during testing and may be less than the service fee listed above.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.
Apple reserves the right to determine whether or not your iPhone is eligible for Out-of-Warranty service. iPhones that are repaired or replaced have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare service contract coverage, whichever is longer. Please see Apple's Repair Terms And Conditions for further details.
Message was edited by: Ingo2711 -
Insert french characters into the database
Hi,
My user requirement is to insert french characters into the db. However he has set as per my suggestion of altering session alter session set nls_language='french' he can't insert french characters. Is this using alter session helps to retrieve only the outputs in french language or to insert too?
Please help.
Version : oracle 8i
nls_parameters at database level:
SQL> select * from nls_database_parameters;
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET US7ASCII
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
PARAMETER VALUE
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZH:TZM
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZH:TZM
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_NCHAR_CHARACTERSET US7ASCII
NLS_RDBMS_VERSION 8.1.7.0.0Your database character set is US7ASCII : you can only insert ASCII characters which is OK for most French characters but not all. This cannot work for:
àéèùçChanging NLS_LANGUAGE won't help. You need to change database character set to WE8MSWIN1252 for example. This should be easy in your case because US7ASCII is a binary subset of many others characters set. Please read http://docs.oracle.com/cd/A87860_01/doc/server.817/a76966/ch3.htm#47136 -
How do I insert a title in the middle of a a clip?
Hi! I am new to iMovie - I have figured out how to put a title at the start of a clip but how do I insert a 'title' in the middle of a clip - I guess like a new chapter heading - I want it on a background/title graphic like the ones you select rather then as text over the top of the video?
Hope that makes sense .... many thanks
RhondaHi again Rhonda,
This article from iMovie Help will give you a bit more information on splitting clips:
http://help.apple.com/imovie/index.html#mov3a61cda3
You can access Help by clicking on Help in iMovie's menu, then select iMovie Help. In the window that opens, firstly click on the Get Started tab, then on the Browse Help tab when you are ready for more detailed instructions. Be sure to view the video tutorials, where available.
John
Maybe you are looking for
-
out of 25 dvds 3 work properly. My problems now are: the movie plays fine and then in sum spots my audio sounds garbled, I've tried different DVDs with same results, some work some don't. I have set the properties to encode "professional" with same r
-
Hello, We have a requirement tp print payement terms details in PO output. e.g. 14 days 2%, 30 net Within 14 days 2 % cash discount Within 30 days Due net I want to print these details as it is in printout. I have checked various possible tables(t052
-
Hi, I have a problem in using transactions with SQL Querys. I developed a TA based an SQL Querys against a MS SQL Server by using the jtds driver. After execution of the sql query I iterate through the result data by using the repeater action on the
-
My iPhone 4s is stuck on the "connect to itunes" whenever I tried to turn it on. But at the moment I don't have a computer and I really need my phone on right at this moment. Is there anyway I can get it to turn on without a computer??! Thanks!
-
Is there a way to monitor CPU temp already built in the software or do I have to download a third party one? If I have to download one what do you recommend?