Is it true there is no tilt in week 38 and newer nanos?
Hopefully I will have my last discussion with Apple about this tomorrow, after the local Consumer Affairs agency finishes talking with the Apple Customer Representative.
She is trying to get me either yet another replacement nano 3g (it will be my 4th) or a refund for my tilted LCD one.
One question I have is this:
I have heard people in these forums say the tilted screen problem was fixed by week 38. The nanos I've gotten so far, with the tilted screen problems, have all been week 35 and 36, so I have no basis for comparison.
Among people who have seen the tilt problem, have any of you seen this problem with week 38?
The Apple guy says he can't guarantee that I would be sent a week 38 one or newer, but the Consumer Affairs agency woman says she thinks that is not reasonable and that she can at least make them provide one of the later ones if they have fixed the problem.
So what I want to know is whether it is worth pressing the issue on that point. I would press the point if I knew for sure that the problem was resolved by week 38.
Does anybody know?
Thanks,
doug
Doug
You may find this MacNN article of interest when conferring with Apple and your local Consumer Affairs agency.
http://www.macnn.com/reviews/apple-ipod-nano---third-generation.html
Paragraph 6 would indicate that Apple is aware of problems with some earlier models having tilted screens and states "The company has said it would replace the affected models."
Perhaps you could email the author through the link on the page and get more detail on that statement.
That seems to be a far different response than the "it is within spec" some folks seem to be getting from local retail stores.
Message was edited by: Anthony Donnelly
Similar Messages
-
suddenly there is a ghost page { 2 pages stacked, i see top of both} one page has "firefox" in top left corner. also a tab called "new tab" has taken over where the present page is usually listed. how do i get rid of both, or do i have to start useing I-net explorer to get rid of it?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Does anyone know when there will be the hardcover cases for the new nano?
when do the clear, plastic hard cases for 5th gen nano come out?
Yeah, I even found an iShade by griffin at my local best buy for the 5G the day that I picked up my 16GB edition for the gym!
They're out... Also you can buy from just about all manufacturer's online now... I think some stores are still waiting to bring them in, as they had to much stuff for the 4G.... -
Revision: 16330
Revision: 16330
Author: [email protected]
Date: 2010-05-26 07:55:41 -0700 (Wed, 26 May 2010)
Log Message:
QA: Yes - Ran test locally and it was failing but tested condition was true - there is no services-config.xml file
Doc: No
Checkintests: NA
Details: Updated expected error message to match current error.
Modified Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/NoServicesConfigFileTest/error.t xtI have uploaded detail.txt at below url.
http://m.uploadedit.com/b041/1413264342685.txt
Hi Mahesh,
According to log file, I find the message ‘The setup100.exe.config file was not found, therefore the DTSWizard and SQLWatson app config files were not replaced’. It seems that the SQL Server setup file is not complete. Please check that if the SQL Server
setup file is corrupted, if it is corrupted, please download it again and reinstall SQL Server 2008 R2.
However, if there’s no problem with the setup file, please check that if there is third-party software such as anti-virus software on your computer blocking the process of SQL Server installation. In addition, make sure that you choose ‘Run as administrator’
to launch the setup and configure SQL Server service accounts appropriately with administrator permission during the installation.
For more details about this error, please review the following similar thread.
http://answers.flyppdevportal.com/categories/sqlserver/sqlsetupandupgrade.aspx?ID=ad794a97-09ae-4aae-9d68-0b06f9af3e16
Thanks,
Lydia Zhang -
Greetings everybody,
I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
I just launched a new website where I sell products with certain variations, for example please view this link: http://www.finerribbon.com/aegean-single-face-satin-ribbon.html
On this particular product, the product variants are supposed to work in such a way where:
If you select the value "1/8" from the "Choose Ribbon Width" field
THEN
The only options active and available to choose from in the "Choose Roll Size" field should be: 500 Yds, 20 Yds & Sample Swatch
Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem where all the options are available regardless of the values chosen, basically the above functonality does not work.
I was told that there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly, is this true? Can anyone advise me if there is a solution to this problem? I would sincerely apperciate it.
Thank you very much for your time and help!Hi...
I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem
At the top of this window you'll see the following:
Apple Support Communities > Mac OS & System Software > Safari > Discussions
This the Safari forum for the Mac OS X.
Better that you post your topic here > Developer Forums: Apple Support Communities
I do see on my iPad what you are rreferring to. But you shoudl get the feedback you need in the developer forum. -
My iPad is hacked. Since a few weeks, every time i try to install a new app there is an phishing attempt. Forcing me to put in some "security questions". Is there any way to clean my iPad and to protect it better than vanilla ios?
Thanks fore the hint. Are you shure it´s from apple?
This popup is not a normal behavior and I can´t see if it comes from apple.
The is no hint on apple.com that its save and a wanted behavior.
Is it true that I have to put in 8 strings everytime I update an app?
my ID + PW
and question 1 - 3 + PW? -
Is there a way in Pages to show and print all the added "comments?" (those you add by highlighting text) I am a teacher, and I would like students to be able to view my comments on printed versions of their papers. I know word displays the comments off to the side of the document, and those comments can be viewed all at once and printed alongside the document.
There doesn't appear to be a way to print conmments in either Pages or Numbers in the Mavericks versions.
Jerry -
Is there a way to create a pan and zoom effect in a lightroom slideshow?
Is there a way to create a pan and zoom effect in a lightroom slideshow?
Nope. Be a great feature. For that I use FotoMagico after exporting JPEG's from LR.
-
Is there a way to create a subscript and/or superscript in FRS?
Is there a way to create a subscript and/or superscript in FRS?
I've done some more searching and understand there are programs that extract the info out of an email. I believe they are called email parsers. Anyone have any more info on this? If so, any suggestions for a program that I could use? Thanks again.
-
I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?
IF it is a manufacturing defect and you bought the device from Apple or an authorized Apple retailer, then take it into Apple.
-
I downloaded a movie from itunes on my ipad. In the downloaded area where the movie should be, I only get a link to "iItunes Terms and Conditions", no movie. There is nowhere to accept the terms and condotions.
Nevermind, the movie was there in the Videos app, not itunes downloads. Thanks.
-
So my itunes says that there is a problem with my itunes and i have to restore it but i have purchased ne songs through itunes on my ipod not through the computer so of course i would have to transfer purchases on my ipod to the computer before i restore it so it does not delete everyting and then i cant back them up. So i went to transfer purchases and It wouldent let me. So how do i transfer my purchases before i restore my ipod so i can back it uup so i dont lose everything. Thanks
There is a backup plan after doing the Restore. Read this.
-
Is there a way to "mix" the nodes and leaves of the tree so that even if they are at the same level (1,2,3...), they will display in a specified order (via sort sequence, alphabetical, etc.).
History:
We are using the Tree UI element to display/manage a material bom interface. We seem to be running into an issue with displaying the nodes/leaves of the tree.. regardless of the order that the context is built (which is currently the order of the exploded BOM from from CS_BOM_EXPL_MAT_V2), the bom is displayed with the nested boms at the top of each level and the single materials below them. For example. If TK1 contains Material1, Material2, Material3, Kit1(containing component1, comp2, comp3), Material4, Kit2(containing comp4, comp5, comp6), and Material5 (in this order), the tree will display with the A level node as TK1, the next node as Kit1 (with its subleaves of comp1,comp2,comp3), Kit2(with subleaves of comp4,comp5,comp6), THEN Material1, material2, material3, material4, material5. Our users are adamant about the items displaying in the correct order (which should be alphabetical based on the description for one report and by location for purposes of inventory for another). I've searched but not been able to locate a similar question. If I've missed it, please point me in the right direction. The users want the tree, not a "tree" table. This is our first attempt at the tree, so maybe we're missing something basic?
TK1
-Mat1
-Mat2
-Mat3
-Kit1
--Comp1
--Comp2
--Comp3
-Mat4
-Kit2
--Comp4
--comp5
--comp6
-Material5
displays as
TK1
-Kit1
--Comp1
--Comp2
--Comp3
-Kit2
--Comp4
--Comp5
--Comp6
-Mat1
-Mat2
-Mat3
-Mat4
-Mat5co-workers said example picture is misleading.. we can make the order work if everything is a "folder" but not a mix of "folders" and "files" (if making a visual reference to the windows browser). i.e - a file is represented as an empty folder.
TK1
. Mat1
. Mat2
. mat3
> kit1
.. comp1
.. comp2
.. comp3
. mat4
> kit2
.. comp4
.. comp5
.. comp6
. mat5
displays at
TK1
> kit1
.. comp1
.. comp2
.. comp3
> kit2
.. comp4
.. comp5
.. comp6
. mat1
. mat2
. mat3
. mat4
. mat5
we can make it work if everything is a folder. This is our current workaround.
TK1
> mat1
> mat2
> mat3
v kit1 (when expanded)
.. comp1
.. comp2
.. comp3
> mat4
> kit2 (when not expanded)
> mat5 -
I need to back up my iphone 5s on my old PC running Windows Vista SP2. After installing the proper iTunes that would run on Vista, I get an error as follows;
"Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes and install iTunes again. Error 2 (Windows error 2)"
I will appreciate any help. ThanksWith the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touch screen not working plus there are blurred lines across the screen and I can't see anything that it displays.
Now when I try too connect my iPhone 4 to iTunes on my computer at home an error message comes up saying that I have to unlock my iPhone 4 for it to communicate to my device.
But the problem is that I can't unlock my iPhone 4 because I'm unable to see the key pad and my touch screen no longer responds when I touch it.
I just want to reset my iPhone 4 back to its Factory Settings & start all over from the beginning.
How can I unlock my iPhone 4 with iTunes on my computer or any other option you suggest me trying.
Thank you in advance,
SiHeroIf you have had a "local guy "repair your iphone you will not get any support from Apple for warranty OR post warranty
If Verizon return it to Apple it wil not be handled by Apple
If Verizon also use unauthorised repairers you may be lucky
(Apple do not sell parts to local guys or anyone else )
Maybe you are looking for
-
Excise Invoice for Order Based Billing Scenerion
Dear Friends, We have a scenarion, wherein we are working with Sales Order Based Billing. We are in the process of Implementing CIN with TAXINN. Is it possible to create excise invoice for the scenarion of Sales Order based billing, instead of delive
-
I upgraded my software on iphone 4s on Tuesday and since then I can no longer send an SMS to my parents (how live in Spain and therefore its a Spanish mobile). The international dialing code is correct, and I am on a contract therefore no isssues wi
-
Cannot find Nokia Belle Refresh on E7 RM-626
Hi, Despite Symbian Belle Refresh being out for quite a while, I cannot seem to download it. My phone says the current version (111.030.0609) is the most recent version. Eventhough the nokia website says there should be a new version (111.040.1511) h
-
My Mac G5 (OSX 10.9.5) can't see my Epson R2400
My Mac G5 (OSX 10.9.5) can't see my Epson R2400 printer. Doesn't matter which prog I try to print from the printer just isn't there. I've used Epson's programme 'Uninstall' to un-install the printer and then reinstalled the driver using the very late
-
Mbp found my printer , but shut it down
I added a Kyocera Fs1000 printer to my mbp , i found it under printers and added it . I printed several items anf it worked great. A message than appered saying the item in the usb port was drwing to much power and was being disconnected . I now cann