Is item category relevant for pricing procedure ?

Hi Guru,
Please let me know with examples where item category is relevant for pricing procedure.
Thanks

Dear BAPI,
First Tings First, Item category is not relevant for determination of pricing procedure.
Pricing procedure is calcualted on the bais of these Parameters:
1) Sales Area ( Sales Area is a combination of Sales organization, Distribution Channel and Division)
2) Document pricing procedure
3) Customer pricing procedure
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh
P.S. you can send me a mail at my mail id [email protected] for any specific details

Similar Messages

Service item not relevant for pricing if used with higher level item catego

Hi,
We have a service item e.g S900 with Item category ZTAD.
This line Item automatically creates a Service Order.
Requirement is , if this service item is used with an Equipement Item,
Item 10 --> Equipment
Item 20 --> Service
--> There would be price required for the Equipment ( Condition type ZPRO - Mandatory )
--> System should not ask for the price of Service Item, as it would be inclusive in the Equipmetn charges.
--> In short if the Service item is used as Sub item with Equipment, it is not relevan for pricing.
I tried copying ZTAD and creating a new item cateogry which is not relevant for pricing...would that be the correct approach, but facing several issues related to Automatic Service order generation.
what could be possible ways to achieve above.
Regards
Trupti Deulkar

Hi,
System will ask the price for item category TAD bcoz service also chargble,in your case insted of TAD use TANN as free,
You can define based on your higher level item category for Ex : OR + Normusage(Blank)Higherlevl item (Blank)= TAN
you can config like this ORNormUsge(Blank) + TAN = TANN
like this you can do it this correct way or els you can manually enter the item catagory (TANN) at sale order line item level.
Thanks
Vinayak.
Edited by: vinayak4all on Jul 12, 2011 2:45 PM

How to assign repairs procedure to the item category relevant for repairs ?

I would like to know the steps to set up the following in the Customizing.
Thanks for your input.
"The repairs procedure has Set of rules according to which actions are generated in the repair order.
It is assigned in Customizing to the item categories that are relevant for repairs processing and is adopted in the repair request item in the repair order. "

Question answered

How to use item category group for pricing?

Hi,
how can I use the item category group to carry out pricing?
I want to determine a condition type for item category group DIEN only and no other.
Thanks for help!
Florian

Hi Florian Preuss,
You should follow the next steps:
1. Check if the item category group field exist in the pricing catalog to choose it as a field in a table condition, if it doesn't exist (I don't believe that), you should contact to a technical person (ABAP) to add it to the structure KOMPAZ.
2. Create a condition table with this field (item category group) and others that you need to determine the condition.
3. Create an access sequence with this condition table.
4. Create a condition type and assign it the access sequence.
5. Add the condition to pricing procedure.
6.. Enjoy it.
Thanks in advance,
Mariano.

Item category - Relevant for billing 'G'

hello!
i want to invoice based on sales order, but only the delivered quantity. due to process limitation i do not want to use delivery related billing.
did anyone use scenario like that before? when i create an invoice for a sales order which has not been delivered yet, the system proposed the full quantity of the sales order. do i need to use some special formula during copy from sales order->invoice?
thanks in advance!
matthias

Hi
I worked on the scenario with the above settings and could not reproduce the above issue.Would brief the details of the order quantity in the sales order delivery document,Invoice and no of delivery document created.
Regards
Ramesh

Unit of measure conversion for CIN is not relevant for pricing

During creation of Ad item type order, when we enter the planned ad size e.g. A CO (Columns) x B IN (Inches), the system is showing a message "Unit of measure conversion for CIN is not relevant for pricing" and pricing is not determined in the Billing Data Set. However if the planned ad size is maintained as A CO (Columns) x B MM (Millimeters), there is no impact to pricing conditions.
Any light how to fix this issue?
Thanks,
Suseela. V

Dear Suseela,
You need to maintain Unit of conversion using transaction code JH51. You have to follow the path Logistics-Advertising Management-Master Data-Conditions-Order/Billing Document-UM for Pricing.
Here you can maintain combination using Booking Unit, Content Component, Design type and assign Unit of Measure to get relevant pricing into billing set conditions.
Hope it will help. Thanks!
Regards
Indra

GI:How to set Indicator:Item Not Relevant for Goods Movements LIPS-NOWAB

Hi,
does anybody know what i have to do to get the Indicator: Item Not Relevant for Goods Movements set for a good issue delivey position? (Table LIPS field NOWAB)
thanks in advance
Steffen

Hi,
the thing is the following (maybe it doesn't work at all, i don't know) :
a) i have a "Non-stock" material (e.g.material type NLAG)
b)this material should be picked, so it should be relevant for the delivery (e.g.item category TAX)
c) for a special reason the "Total goods movement status" in the outbound delivery header shouldn't be "Not relevant", therefore i assigned the item category TAX to a shedule line category that has a movement type (e.g. CN)
d)but the bad thing is, that the customer has set the indicators "quantity updating" and "value updating" for the material type NLAG, and so the goods issue posting gets some errors. eg.g missing storage location etc.)
During debugging i found a coding that checks the sign NOWAB of lips, the documentation says:
"You can use this indicator to control whether the item is relevant for goods movement when the delivery is still being created.
When this indicator is set, goods movement is not posted for this item - regardless of the movement type assigned to it."
So i head the idea it might be possible to set this indication (Lips-nowab) somewhere in the sales order or somewhere else but maybe this conflicts with point c) above .
Maybe shomeone knows what to do or has a better idea.
Best regards
Steffen

User exit -Item Category Determination for a Home Delivery Shipping Condn

Hi All
1.     A Standard Order is created in ECC and if the shipping condition is HOME DELIVERY the default site that gets determined will be a HUB and if it is an UPS shipping condition the default site that gets determined is the PDC
2.     The default Item category determined for the delivery relevant items (Box1 and Box2) will be ZSNP which is fine if the Shipping condition is UPS and the site is PDC.
3.     However if the Shipping condition is HOME DELIVERY and the site is a HUB then the ZSNP Item Category has to be flipped to ZTBB which then will determine the correct Schedule line category ZB and triggers the IPO process. This in turn auto creates a purchase requisition on the PDC when the Sales Order is saved
plz help
thnx
rohit

Hi Lawrence Tam,
         If you are going to create a new item category usage to determine an item category, you need to add a new line in transaction VOV4 for the new combination of sales document type + Item Cat. group + usage + high leve item cat. to determine the item category.
Thanks in advance,
Mariano.

Item category group for Sales of Nonstock Item with Order Specific Procurem

What will be the item category & group for the material for Sales of Nonstock Item with Order Specific Procurement.So that purchase requestation is created

Hi
As of my Understanding this a scenario of THIRD PARTY SALE WITH SHIPMENT where delivery will be created . Addition to the previous setting few more changes that need to be accomodated like it has to be delivery related billing - A for item category
The indicator 'E' will make sure the Stock will be procured only against the particular sale order and it will be delivered only against this sales order. Apart from this there are few more thing need to be done with the Schedule line level
You need to give the movement type 601, item relevant for delivery need to be checked, order type from the MM side need to be assigned, item category from MM and Account assignment group from MM, all these need to to be maintianed in Schedule line level.
Infact why not TAS , we can use TAN , or ZTAN itself But as per the scenario we need to do the changes as required.
Doing all this we can process this order.
Thanks.................Rishi

Formula for Pricing procedure

Hi,
I got a requirement where I need to write a formula for Pricing procedure say ZAUSX1. The requirement is :
s.no. 170 = s.no. 150 - (sum of s.no. 151 to s.no. 169).
s.no. 450 = s.no.170 - (sum of s.no.171 to s.no.449).
Can anyone send me the steps for the above requirement and the relevant suggestions will be highly appreciated.
thanks,
Bhaskar

Hi
In the pricing you should create a 4 fields:
- One (A) to store the value of position 150
- One (B) to store the value of the total from 151 to 169
So assign a routine to calculate the position 170: A - B
- One (C) to store the value of position 170;
- One (D) to store the value of the total form 171 to 449
So assign a routine to calculate the position 450 = C - D
U can enhance the structure KOMPAZ in order to create the fields A,B, C and D for KOMP, or create an APPEND structure of KOMP
Max

Line item not relevant for payment release

Dear Expert,
When I select payment block : 'Payment Request' in FB60. Error Message appear "Line item not relevant for payment release".
I also have set payment block in master vendor and OBB8.
Can you tell me why the error message still appear?
Kindly need your help
Thanks and Regards,
YL

Do you have any workflow variant in place?
Moreover, when you have already set the Payment block at Master level, you need not to fix it in transaction level.
Vendor itself will not get paid until unless you remove the block option
Thanks

To fill in the material number with item category u201CBu201D for Framework Order.

The use of framework orders (also referred to as blanket purchase orders) enables you to procure a variety of materials or services from a vendor up to a predefined maximum value (the value limit).
Instead of a specific delivery date, you specify a validity period for the order.
Goods receipts or the entry and acceptance of services performed are not necessary in the case of a framework PO and limit items.
The invoices are posted directly with reference to the purchase order, provided that the specified value limit is not exceeded. When the value limit of the PO is reached, or the validity period is exceeded, the system issues a warning message. It is possible to book the invoices, but these are blocked for payment.
During the phase of service performance, the cumulative u201Cactual" values (for the services actually performed) are continually updated in the underlying purchase. This enables you to monitor the progress of a procurement project on an ongoing basis. By comparing the "actual" value with the total value, you can always obtain an overview of the degree to which a budget for unplanned services or materials has been exhausted (i.e. see whether predefined limits have been reached or nearly reached).
So with the Framework Order type (FO) and item category u201CBu201D you get the error that it is not allowed to fill in the material number with item category u201CBu201D.
Please suggest me the possible solution to fill in the material number with item category u201CBu201D for Framework Order.
Best Regards,
Harisha

The Framework order type is specialy defined for lesser value procurements (ex: stationeries, cleaning services ....) which are all not worthy to create Material Master at all.
If you are very sure to fill the Material number, then proceed with some other document type.
In what circumstances you want to put material number in FO order?
Karthi.

Item category determination for make to order item

Hi experts,
how can I determine item category(tak) for make-to-order. mean what should I put in ITEM CAT.GRP, USAGE AND HIGHER LEVEL ITEM CATEGORY GROUP. Please advice.
Thanks in advance.

Neel,
Goto VOV4 and create new entry with
your sales doc type + itm cat group + usage + higher leve item cat = TAK
Just check your item cat group in material. If you have created TAK without copy then also check your SL assignment with VOV5.
Suhas

Item category editable for components in task list

Hi all,
I need help to put the item category editable for components in task list.
Currently it comes as "L" and the field is non editable. Do you have any ideas or solutions? I already tried SPRO but didn't find anything useful.
Thanks in advance,
MB

Thanks Maheswaran,
So if it isn't possible to make it editable, how can I change the category to 'N'?
Does that configuration depend on the company? Because I want the item category to be 'N' for just some companies.
Thanks
MB

Item category group for Raw Materials

Hello Gurus,
Goodmorning,
I have a client requirement,
Here my client is selling the Raw materials , i have some confusion in taking the category group , what is the item category group we have to use for determing for the sales categories ? I don't find any special item category group for raw material . in material master as well as in item category determination in in sales document types too .
looking for your inputs in this regard.
Thanks &Regards
Ravi.M

Hello Ravi,
Sales of Raw material already being discussed some times back.
As I know, as per Central Excise law, you are not suppose to sell the raw material from a manufacturing unit.
Hence, you rename the ROH material code with suffix A. In tcode OSM2, activate sales view tab.
Apart from this, you need to maintain the renamed code in tcode J1ID with numeric value 1 under the tab Declared.
But, normal OR-LF-F2 process.
FYI - Choose of Material tyoe will be important than choose of general item category group. As I Cat group, Materials grouping that helps the system to determine item categories during sales document processing. If a group is configured specific to distribution channel, it has priority if the corresponding activity is distribution channel-dependent. In the standard system, there are normal items, items that signify services (and therefore need no delivery processing) and items that signify packing material, for example.
Thanks & Regards
JP

Is item category relevant for pricing procedure ?

Similar Messages

Maybe you are looking for