Is iTunes 11 compatible with Windows 10 Technical Preview?

Hello.
I just installed Windows 10 Technical Preview and iTunes 11 on my PB, but now iTunes does not start up.
Can anybody explain me why?
kind regards,
jolimans

iTunes is not officially supported on Windows 10, and will not be until the latter is released in the fall.  While Apple, like all other vendors of Windows software, will be working to ensure compatibility at that time, it is not possible to say whether any given version of iTunes will install, run, or operate correctly against a Tech Preview that may be unfinished and/or unstable.
That said, it is possible that more recent versions of iTunes may include some reworked code that's intended to be a component of Win 10 compatibility.  This may be stretching assumptions a little, but it may not be a coincidence that the last two releases of iTunes (12.1 and 12.1.1) have included full 64-bit applications and not just the "32-bit application with 64-bit installer" architecture of previous releases.  Have you tried the latest (12.1.1.4) release to see if that works better than 11?

Similar Messages

  • How do i know if my itunes is compatible with windows 64 bit?

    How do i know if my itunes is compatible with windows 64 bit?

    Did you download the 64-bit installer?
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    tt2

  • Is iTunes now compatible with Windows 8 with the iTunes 11.0 update?

    Is iTunes now compatible with Windows 8 with the iTunes 11.0 update?

    Problem solved. The music was from Amazon MP3 store and I had to re-download it from the Amazon Cloud Player to my hard drive. It was there, but not even the Amazon Cloud Player software would play it from my PC, though it would from the Cloud. So after the re-download, I was able to add it to my iTunes Library.

  • Is iTunes 11 compatible with Windows's 8

    Is iTunes 11 compatible with windows 8?

    Thanks homeport1, that helped me to get it installed, although after I rebooted as prompted, Windows said the installation was corrupt and I had to Repair it. iTunes 11 is now installed and running but I can't save my Preferences. I have been through the menus and set them but when I click on OK, the dialogue box doesn't close. Nothing is highlighted to indicate I have made an error in any of the selections. It also flags some videos as new but not others, even though the ones flagged as new are some of the oldest in the library. It seems like there might be some bugs in this version where Windows 8 is concerned.

  • Itune is compatible with windows 8?

    Is iTune compatible with Windows 8 Pro? Thanks in advance.
    cmolinap

    iTunes is not certified for use with Windows 8. 
    Some people have installed it and report that it works fine;  others are reporting problems of various kinds.  If you are of the early-adopter temperament, go for it.

  • I need help with Windows 10 Technical Preview. No sound. Korean files. Screen Flashes

    I installed Windows 10 Technical Preview Yesterday. Took TEN hours!
    Now, I have NO SOUND. There are Korean files on my desktop. My screen flashes from blue to my desktop. It is SLOW. 
    I had Windows 8 before this. I bought this laptop brand new from a store in January of this year. 
    Can someone help me either fix the issues or help me get back to Windows 8?

    it came with windows 8.1 then, the windows 10 preview is still kinda early in the curve so it may have a few problems with your machine
    probably be best to wait till the summer when its ready
    Place your rig specifics into your signature like I have, makes it 100x easier!
    Hardcore Games Legendary is the Only Way to Play!
    Vegan Advocate How can you be an environmentalist and still eat meat?

  • Itunes update compatible with Windows 8?

    Does anyone know if there will be a iTunes update soon that will allow you to sync your ipod to itunes with windows 8?

    The one you can download here... http://www.apple.com/itunes/download/

  • Is iTunes compatible with WINDOWS 8 DEVELOPER PREVIEW?

    I installed WINDOWS 8 DEVELOPER PREVIEW about 3 weeks ago. I am unable to sync my iPod. The computer recognizes the APPLE software but I can't go anywere from there.

    just open and follow the very easy instructions it downloads an EXE file
    I can give you the batch file if you want
    it just stops the Apple mobile device service starts it than opens itunes
    Batch:http://www.4shared.com/file/IRx8M838/W8DP_iPod_Mounter_Project__COM.html
    This is the Script
    @echo off
    echo W8DP iPod Mounter For iTunes by Carter Gibbs
    echo Please Close iTunes And Unplug Your iPod Before Pressing Enter
    pause
    @echo off
    NET STOP "Apple Mobile Device"
    echo Press Enter Once You Pluged In Your iPod And Heard 2 Sounds From Your Computer
    pause
    @echo off
    NET START "Apple Mobile Device"
    echo Completed....
    echo Press Enter To Open iTunes
    echo (Once iTunes Is Opened You Can Close This Window)
    pause
    @echo off
    "c:\Program Files (X86)\iTunes\iTunes.exe"
    Enjoy
      Carter Gibbs

  • Is itunes 10 compatible with Windows xp?

    I've tried to download the new itunes 10 on my windows xp and halfway through it tells me that if I continue downloading that it could eventually ruin my system. What is going on?

    I would recommend waiting. I have Windows XP and I made the unfortunately mistake of installing iTunes 10. Now until they post a fix for this I have no use for iTunes. It no longer recognizes that I have a device attached. I've tried unsuccessfully to uninstall and re-install but it hasn't helped. And, for reasons I don't understand when I try to re-install an older version of iTunes that worked perfectly before, now I can't even get it to open at all. Personally I wish I never heard of iTunes 10.

  • Windows phone emulator not working with windows 10 technical preview 9926

    I recently updated my computer to technical preview 9926 and now when I launch the windows phone emulator in 2013 visual studio for windows. It says "Starting windows phone OS" for like 10 minutes. Then it gives me an error message:
    windows phone emulator is unable to connect to the windows phone operating system: The phone did not respond to the connect request. Some functionality might be disabled. And then it will boot up for a little and the home search and back
    button wont work and it will never deploy my app then it will crash and bring me back to visual studio. My hyper v is turned on I have checked all the network switches. The emulator used to work with the technical preview but ever since the newest update
    it stopped working. 
    Any help would be appreciated.
     

    Hi mavese,
    >>I recently updated my computer to technical preview 9926 and now when I launch the windows phone emulator in 2013 visual studio for windows
    Currently, Windows 10 is still in the Technical Preview stage, it is not official supported in this forum, and I would suggest you sending feedback using build-in way, please refer to this link:
    http://windows.microsoft.com/en-us/windows/preview-how-to#how-to=tab7
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Windows 10 Technical Preview and ISCSI

    Is there a version of ISCSI Initiator that is compatible with Windows 10 Technical Preview?

    Hi Newton Tiberius,
    Rick Dee is right, Microsoft iSCSI Initiator is installed natively on Windows 10 Technical Preview.
    Please make sure the ISCSI service is running background:
    Then search ISCSI you can get a result of set up ISCSI Initiator:
    Alex Zhao
    TechNet Community Support

  • Is itunes compatible with Windows XP?

    When it was in the process of updating itunes, a message came up and said it might not be compatible with Windows XP. It strongly suggested I stop the update. So, I did. It also said that if I didn't it could damage my computer immediately or in the future. Is the latest itunes update compatible with Windows XP?

    It is but with this version - Windows XP Sevice Pack 2 or later, 32 bit
    Read here, right hand side > http://support.apple.com/kb/DL1614
    Hope that help

  • Does Photoshop CS6 compatible with Windows 8?

    Does Photoshop CS6 compatible with Windows 8 Consumer Preview?

    As far as I can see it is.  Everything seems to work.
    http://forums.adobe.com/thread/978973?tstart=30
    -Noel

  • Windows Server Technical Preview - RDS - RemoteFX 3D

    Hi Windows Server Team,
    I am having an issue with the Windows Server Tech Preview and Remotefx 3D. I installed the RDS role and have it all configured with no problems. I loaded a VM of Windows 10 Enterprise Tech Preview. It works fine, however when I activate the RemoteFX 3D on
    that virtual machine. It then just shows a black screen in my Hyper-V Manager and just stays hung on the black screen. I have been working with RDS and RemoteFX 3D since the Windows 2008 R2 days and have never had this problem at all. When I try to Shut down
    the VM it stays hung when I try to Turn Off the VM it stays hung. I am forced to reboot the server and when it comes back up it still just shows a Black screen for the Windows 10 Enterprise VM with RemoteFX 3D turned on. I really wanted and was interested
    in testing the new OpenGL features and other ehancements that have been mentioned with this version of RDS and remotefx 3d. I also noticed that Gen 2 VM's now also support the RemoteFX 3D features and even tried to create a Windows 10 Enterprise as a
    Gen 2 VM but I have the same problem. My server is a Dell PowerEdge R720. Thanks and I look forward to your reply and can hopefully get this working.
    Regards,
    Robi Rodriguez

    Hi,
    Thank you for posting in Windows Server Forum.
    Initially we need to check whether the device is supported for latest version of features available. To use new feature available with Windows Serer Technical Preview we need to see that device supports the latest available OS. Please go through
    this article for information. You can contact Dell for further information whether it
    still have any updates for Windows Server Technical Preview.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • ComputerName in Unattend.xml ignored by Windows 10 Technical Preview [all builds]

    Since I was not successful in creating an Unattend.xml with
    Windows 10 Technical Preview ADK I modified the one from Windows 8.1. This works with exception of
    <ComputerName>MYW10PCNAME</ComputerName>
    I do get an auto-generated PC name instead.
    The process is, that the Unattend.xml is copied into Panther folder after image build incl. sysprep.
    Can someone post an Unattend.xml that is working for Windows 10 Technical Preview?
    I will try to post this in feedback app.

    Hi,
    It seems like there is a problem with Windows 10 deployment. Firstly, please post this phenomenon to Windows Feedback.
    In my opinion, it is probably Windows 10 itself problem, I would make a deep research with this problem, hoping there is some progress.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for

  • BT Home Hub 2-287C and BT Openzone/BT Fon

    This is my first  posting. My home hub has recently been intermittently "taken over" by BT Openzone. I have followed  instructions from the Openzone homepage, later from BT Broadband Desktop Help, and later BT Broadband telephone help line. They all

  • ICal creates hundreds of events

    Hi. I just created a three day repeating all day event in April. To my horror iCal created not just the event I wanted but hundreds of other, separate events, though all in the same conferences calendar, lasting up to May 2010. Any ideas? I sync this

  • Billing Documents Printed Randomly

    Dear All, We have a strange issue, where through Billing Background job -Billing Documents are printed randomly e.g. Billing documents will be Printed at Printer in this sequence--- Billing Document - 1,2,3,6,7,4,8,9,5 etc etc... How to fix this. Any

  • Pass code required

    I keep getting a pass code required message on my iPad?? Is this a bug or is there a way to fix?

  • ITunes not converting to ACC

    I saved all of my music to DVDs, so when i put them into the CD-ROM, and i start to import them, it tells me that iTunes can convert the songs to ACC, so i hit convert. iTunes imports all of the songs that are ACC already, but then it doesnt convert