Is iview considered out of the box?

Hi,
If an iView is available is that considered out of the box?
What out of the box means?
Is out of the Enterprise Portal Server.
Thanks in advance

"Out-of-the-box" iViews (and any other objects for that matter) would be any that are pre-made for you...like those that are part of the portal install itself, and those that are delivered with Business Packages. "Out-of-the-box" means it is ready to use for it's purpose without any intervention on your part.
The ones you refer too (from SAP transactions and/or PAR files or whatever else) are more "options" you have when creating an iView (or other object). When creating an iView, a "wizard" steps you through the process which gives you several options for the "kind" of iView you need.

Similar Messages

IPod Touch 1st Generation doesn't work directly out of the box?

I just bought a first generation iPod touch and first things first I plug it into my PC. Nothing happens on the iPod and on iTunes I immediately get a message saying "iTunes has detected an iPod in recovery mode. You must restore it before it is usable with iTunes." So I hit OK and click yes to the message about restoring it to its factory settings, considering that's how it should be anyway since I had literally just taken it out of the box. I finally get a reaction from the iPod, and it's a solid white screen followed by the apple logo, and then for about 5 minutes iTunes says it's "prepaying the iPod for restore..." followed by the error message "The iPod "iPod" could not be restored, an unknown error occured. (1604)" Then the iPod disconnects from iTunes and proceeds to be frozen at the Apple logo screen. I have looked at all the troubleshooting walkthroughs and none of them work because I have never seen a screen on the iPod other than the Apple logo, it seems as though the only way to fix this is if I just take it back and get a replacement

Hello and Welcome to Apple Discussions.
Is the device brand new? - the Second Generation have been around for some time now so I hope you got a good price on it.
Have a read of this article which explains how to deal with the 1604 error:
http://support.apple.com/kb/TS1458
Let us know how you get on.
mrtotes

Out of the box behavior of the Pagination control

Why does the Pagination invoke the PageFactory callback upon page count change? And when it does invoke it, why is it with currentPageIndex=0? Should there be an API to remove this listener if this is undesirable behavior? If we know we may need to alter the Page Count after construction of the Pagination control, would it be best to remove the old one, and construct a new one for display at that point since the current implementation seems to behave inconsistently when one wants to alter the Page Count post-construction and/or callback configuration.
Please consider the following scenario:
The user is viewing a TableView of items. Below the TableView is a Paginator whose PageFactory callback fetches rows from a database and calls TableView.setItems(<results>). There are 3 pages and the user is on the 3rd page. Only 5 rows remain out of a possible page size of 20. The user decides to delete the 5 remaining rows on page 3 from the table/database. Now it would seem natural at this point to conclude that page 3 no longer exists and we would want to the user to return to page 2. If we simply call paginator.setCurrentPageIndex(currentIndex - 1) then we will correctly transition the user to Page 2, however Page 3 will remain displayed in the Pagination control and if the user browses back to that page, he is met with the "There is no content to display" label. So it would seem natural that we could presume this happening and instead call paginator.setPageCount(2), then paginator.setCurrentPageIndex(currentIndex - 1). That way the Pagination control reflects an accurate number of pages. Unfortunately, this results in TWO callbacks to the PageFactory method, one at currentPageIndex=0 and another at the correct index. Sometimes the widget that is constructed in the PageFactory callback (TableView) doesn't get displayed properly (disclaimer: speculation ahead) probably due to some asynchronous nature of the two competing callbacks (?).
I'm struggling to get a handle on this control. So far, my experience with TableView has been pretty good. I love the features you get with this Pagination control out of the box, but some of the choices that were made with regards with what APIs to expose confuse me. The frustrating thing about callbacks is that sometimes you can get caught in this callback hell where there are all sorts of callbacks being invoked and you don't really know why. Often times, the Javadoc does not indicate that there is a default listener being applied to certain property that may invoke one of these callback. I don't mean to sound like a rant. Overall my experience with JavaFX 8 has been very positive so far. I can usually always find a workaround if a come across a weird issue with an out of the box control. Worst comes to worst, I'll write my own Pagination control.
Thanks for your time.

For anyone else that may come across this post. I was able to find a workaround by simply using a field, boolean pageCountReset, and then bounding all of the logic in my page factory call back with a condition checking for this boolean value i.e. if (!pageCountReset) // continue, else // noop. Then, if I need to reset the page count, I set my boolean to true so that the page factory callback results in a noop. Because the pagination control under the hood will make currentPageIndex=0 (as I talked about above) if the page count is reset, I then have to be very explicit and either call my page factory callback manually to refresh the current page if it still valid, or I call pagination.setCurrentPageIndex(<new index>) so that the page factory callback will be invoked and pageCountReset will be false at this point, so I can successfully transition pages.

Logging in ifs and renderering capabilities out of the box

Hello there
Just wondering if anybody could clarify/confirm a few things for me...
I'm currently trying to use 9ifs as a 'conversion' engine. I have an XML file within a 9ifs repository that I wish to transform using an xslt when I retrieve it.
Does 9ifs contain out of the box functionality to perform this? If so, how do I use it or do I need to write a custom renderer to perform the tasks that I have specified?
I have had a play with the SimpleXmlRenderer however have not been able to find any solid examples of how to use it nor do I know whether it is possible to use it to specify the xslt that will perform the transformation.
I have also heard that 9ifs has an inbuilt 'logging' capability - ie it can keep a record of files that have gone in to 9ifs or gone out. Is this also true and how would I use it?
Finally, I have heard that one of the capabilities of ifs is that it provides 'transactional' support in either putting files into the repository or taking files out - ie a file is either there or it is not, there is no in between, corrupt file state. Can anybody shed any light on this as to whether it is true or not?
Jason

The CMSDK does not include any out-of-the-box XML transformation capabilities, but it is very easy to code XML/XSLT transformations using Java, and I believe Internet Explorer has built-in support for it, so one could consider that built-in functionality. You could write your own servlet to perform any kind of transformation you wish on any file in the CMSDK, and serve up the resulting file via HTTP, for example.
The CMSDK is extensible and configurable in a way that could allow you to keep track of files uploaded and downloaded into the instance. You can write custom code and plug it into various extensibility points which allow you to modify default behavior or extend it to include custom operations. See the developer's guide and the javadoc for more details.
The CMSDK is a transactional object store -- it is true that files can be uploaded and modified within a transaction, and completely rolled back in case of failures.

ESOA and Out of the Box services doubts

Hi,
I am reading about PI 7.1 and going through eSOA architecture. What I understand is, The eSOA says that we have some out of the box services avalable from SD, for example creating a sales order. This can be exposed as a web service from R3. When this available as a web service, and if the calling application is capable of calling web services, where is the need for PI? Why do we need to use PI for SOAP to SOAP communication?
How inside out and outside in approaches are different in eSOA architecture as far as PI and R3 are considered? Can some one clear my doubts?

no, no, just hints and personnal opinion
eSOA is SOA from sap marketing point of view. It was ESA, but nobody undertood, so, they changed the name to eSOA. Don't mind about the name, it is all about to have services well organized (someone could use "orchestrated") supporting business processes. Different than having function modules published for remote use
Well, developers has almost nothing to do with soa (but they want it We want (as developers) to make soa, but it does not work. This initiative (as sap really got in its soa name) need to be from enterprise level, and probably do not apply to mid-sized companies, only to the big ones.
Software architects will be probably disapointed (at least untill PI7.0 that we have here) and start to build their own components and their own soa strategy - very hard working.
I didn't find any of called "out of the box" sap services that really match our requirements, but found many bapis and standard functinos that do that. So, most of our services are based on using many different standard functions to provide a complete service, using sometimes ccBPM, sometimes abap proxies, sometimes soap to soap, sometimes RFC, even depending on requirements, but all of them centralized at PI to help on the governance of all those services.
Did you tried to go through ES Workplace and its forum? I think is a good starting point. You can get an user id to try the services there and make some experiences.
reagards.
roberti

My usb ports are not reading anything in plug in. new out of the box iMac

i just took my mac out of the box and the usb ports don't seem to be working. i plugged in a gopro and an external hard drive. neither will show up anywhere.
there is power going to them. what might be wrong?

Worth a shot. Whats the harm.
I'd not recommend it on a brand new Mac. That should be considered DOA. See this caution in this article:
an SMC reset should only be attempted after all other standard troubleshooting has been performed.
http://support.apple.com/kb/ht3964

Is the latest update to the 6th gen nano a software download or does it come with the new watch faces and larger icons out of the box

Apple shows the new 6th gen nano with the new selection of watch faces and lager icons etc as per new update, but stores still have the 6th gen nano with just 3 watch faces and smaller icons etc. Is the newer spec just a software update that i do after purchase or does it come updated out of the box?
Thx

It should come out of the box with the new 1.2 update, but if it doesn't you can simply connect it to iTunes, download, and install the update from there.
B-rock

Help Please - on a VC that works out of the box with MAC before I sellup

I have to declare that I’m somewhat frustrated at the moment and I could do with some good advise please bare with me while I explain.
I have recently converted from all types of PC systems and MS OS to Apple. The conversion was based on a few drivers.
1, My wife finally has decided to “learn” how to do her own web work instead of asking me to look up this or that for her. So as she was starting from scratch I thought MAC.
2, At the same time I had a play with Vista at work and disliked it. I was using XP & W2K at the time.
3, I wanted to update my home hardware, which was 3 years old.
4, The accountant said I hadn’t spent enough on IT last year.
5, New project work in the planning that required video/audio work to upload onto the web and everyone said MAC was the best.
So having looked around and done what I thought was enough research I started investing. To date I’ve invested £4500 plus.
Started by buying
iMAC 24” 2.8 Gz Intel with 4GB ram (for the home office)
MacBook Pro 2.4 with 4GB ram (for out and about working)
iPHONE 16GB (which is great)
VMware Fusion was installed for those things that I couldn’t live without until I found a suitable replacement like MS Money, Paint Shop Pro, MS Office etc. Installed XP.
Tried Open Office found it to clunky and hard work working off files for MS Office that others sent/required. Ended up buying Office 2008 only to find VB macros don’t work in Excel and all my company spreadsheets still need PC MS Excel to run so back into XP via Fusion.
Then to MAIL which is great on the iPHONE as I can easily monitor my 5 email accounts, what a result. But now I come to attach JPG files as I would in outlook and they open into the content of text in the mail and will not stay closed but disrupt the message. Wholly unacceptable to my way of working with no cure.
Scanning next, so I down loaded GIMP to replace PSP which I find useless so back to PSP I go again via XP & Fusion.
Next and finally the VC project, Now please bare in mind that all I want to do is shoot film, upload it to edit it and then mount it on the web page. I have no desire to become any form of expert in the field just get the job done.
So reviewed iMovie to understand the spec. Realise it has limitation and reviewed FCE which seems to plug the gaps and boarders on being more professional.
At this point I must say I’m not totally new to this subject as I have used Studio8 and a JVC GR-DVL166EK video cam a couple of years ago and got on ok without any issues simple plug and play with great results.
Having reviewed the standards that the software is reported to work too without any publicly declared exclusions or exceptions by Apple I went shopping for the VC. (I didn’t know of the forum at the time and to the best of my knowledge Apple don’t advise of its existence in any product information on anything I have bought.)
I buy a Panasonic HDC-HS9 for £700 which doesn’t flaming work despite the fact that it should based on all the standards quoted by both manufactures and there are no disclaimers from either party that it won’t work.
I have reviewed the compatibility list on the support page (now I know its there) and find that the Panasonic HDC-SD5 does work. I reviewed the comprehensive detailed model spec on the Panasonic web site and there is no differences between the to models at all accept the HDD.
So why don’t it work?
*At the end of the day can anyone please recommend a VC that will produce high quality results without the need of a 3rd party software to connect and upload files convert and muck about instead of getting on with the job.*
And if all the publicised specs don’t allow you to conclude compatibility how can you protect your investment? Where do we legally stand and where is the accountability to the consumer.
<edited by host>
I am that fed up with the last 3 months of mucking about Bill Gat*es may just get me back.
Thanking anyone in anticipation for some meaning advise and help.
Regards
Alan

Hi, and thanks for you interest. The problems is that whether I'm using iMovie or FCE I get to a stage where the thumbnail image is present but if you try to play, import or any other action in either app it closes down and a message comes up " The Application Final Cut Express/iMovie quit unexpectedly - Mac OS X and other application are not affected" then asks if I wish to relaunch. I then hit the report to Apple button and afterwards relaunch. I was recommended to use Voltaic which I have tried, it worked but is to much mucking about for something that should work out of the box.
This problem happens on both the iMAC and the MacBook so quite sure it's not a OS software issue. All software update are up to date also.
Any ideas?

Not able to start out of the box approval workflow programmatically

We have a requirement to start an out of the box workflow from a .NET web service.
We are using the StartWorfklow method:
wfManager.StartWorkflow(item, association, association.AssociationData
we are getting the below error message at the above line of code: Attempted to perform an unauthorized operation.. Data: System.Collections.ListDictionaryInternal
Then, we tried:
SPSecurity.RunWithElevatedPrivileges(delegate()
        wfManager.StartWorkflow(item, association, association.AssociationData,
SPWorkflowRunOptions.Synchronous);
Now, the workflow got canceled automatically with "Failed on Start" status. In the "Workflow History", it is showing 2 records with "was canceled by System Account." & "failed to start" in the description
column.
Please advise.

Hi Zhengyu,
1. I've already done that:
a) when "SPSecurity.RunWithElevatedPrivileges(delegate()"
is used, there are no errors showing up and code gets executed. However, the workflow failed to start.
b) When I don't use elevated privileges, the code is showing an error (Attempted to perform an unauthorized operation.. Data: System.Collections.ListDictionaryInternal) when
it tries to start the workflow (StartWorkflow method).
2. The workflow starts with no issues through UI. I tried it using "System Account" and another account.
3. I tried also "Collect Feedback" workflow template. Same results...
You can find the code below:
public
stringStartItemWorkflow(stringsitePath,
stringlibraryName,
stringfileName)
stringreturnVal =
String.Empty;
stringwfName =
"VPApprovalWF";
SPUserTokentoken = GetSecurityToken(sitePath);
try
using(Microsoft.SharePoint.SPSiteportalSite
= newMicrosoft.SharePoint.SPSite(sitePath,
token))
using(SPWebportalWeb
= portalSite.OpenWeb())
                    portalWeb.AllowUnsafeUpdates =
true;
SPListlist = portalWeb.Lists[libraryName];
SPQueryfileQuery =
newSPQuery();
                    fileQuery.Query =
String.Format("<Where><Contains><FieldRef
Name='FileLeafRef' /><Value Type=\"User\">{0}</Value></Contains></Where>", fileName);
                    fileQuery.ViewAttributes =
"Scope='RecursiveAll'";
SPListItemCollectionlistItemCol = list.GetItems(fileQuery);
SPWorkflowManagerwfManager = portalSite.WorkflowManager;
SPWorkflowAssociationCollectionassociationCollection
= list.WorkflowAssociations;
if(listItemCol.Count > 0)
foreach(SPListItemitem
inlistItemCol)
if(associationCollection.Count > 0)
foreach(SPWorkflowAssociationassociation
inassociationCollection)
if(association.Name == wfName)
                                        item.Update();
                                        association.AutoStartChange
=
true;
                                        association.AutoStartCreate
=
false;
                                        association.AssociationData
=
String.Empty;
                                        StartWF(wfManager,
item, association);
                                        returnVal +=
"Workflow Started";
break;
else
                                returnVal +=
"No workflows are attached to the library.";
else
                        returnVal +=
"A file with the name provided doesn't exist";
                    portalWeb.AllowUnsafeUpdates =
false;
catch(Exceptionex)
            returnVal +=
"Workflow not started, reason: "+
String.Format("Source:
{0}. Stack Trace: {1}. Inner Exception:{2}. Message: {3}. Data: {4}", ex.Source, ex.StackTrace, ex.InnerException, ex.Message, ex.Data);
returnreturnVal;
SPUserTokenGetSecurityToken(stringsitePath)
SPUserTokentoken =
null;
SPSecurity.RunWithElevatedPrivileges(delegate()
            Microsoft.SharePoint.
SPSiteportalSite =
newMicrosoft.SharePoint.SPSite(sitePath);
            token = portalSite.RootWeb.EnsureUser(
"DOMAIN\\ADMIN-USER").UserToken;
            portalSite.Dispose();
returntoken;
privatestaticvoidStartWF(SPWorkflowManagerwfManager,
SPListItemitem,
SPWorkflowAssociationassociation)
SPSecurity.RunWithElevatedPrivileges(delegate()
            wfManager.StartWorkflow(item, association, association.AssociationData,
SPWorkflowRunOptions.Synchronous);
Thank you all for your help.
Regards,

Not able to get Out-of-the-Box Examples Index Page for running the jsp examples

Hi
I am a new person using weblogic first time I installed the weblogic 7.0 beta
version on my machine.I am trying to start the weblogic server console so that
I can configure web applications examples on my machine.
I am getting following error and not able to view Out-of-the-Box Examples Index
Page
error:
<Apr 5, 2002 12:11:39 PM IST> <Error> <SystemDataStore> <null> <Unable to listen
on Port 7003: Address in use: JVM_Bind>
Please help me to find the reason to have this problem
Thank You in advance
Vikas

Hi.
Please post all WLS 7.0 beta questions to the beta newsgroups -
weblogic.developer.interest.70beta.*.
Thanks,
Michael
Vikas wrote:
Hi
I am a new person using weblogic first time I installed the weblogic 7.0 beta
version on my machine.I am trying to start the weblogic server console so that
I can configure web applications examples on my machine.
I am getting following error and not able to view Out-of-the-Box Examples Index
Page
error:
<Apr 5, 2002 12:11:39 PM IST> <Error> <SystemDataStore> <null> <Unable to listen
on Port 7003: Address in use: JVM_Bind>
Please help me to find the reason to have this problem
Thank You in advance
Vikas--
Michael Young
Developer Relations Engineer
BEA Support

Add javascript to Out of the box Modal Dialogue Box in Sharepoint 2010.

Hi,
We have Sharepoint and Project Server 2010 SP-2 enviroment. We are using Project Server Timesheet for our managing Time logging.
Project Server 2010 has "Add existing task" Modal Dialogue box in which I want to add "Javascript" code in order to sort the Project Server Timesheet Line Claasification listbox control in Ascending order.
As you can see from below screenshot "Standard" the Out of the box timesheet line classification is coming at top and then our custom line classification coming.
But I want to sort this list in ascending order so that this "Standard line classification can come at the bottom of the listbox control.
Please suggest me how can I achieve this.
Thanks much !!!
Sachin Vashishth MCTS

Thanks SaiRam from input, I can get JQuery for sorting the control over the internet no issue. I have to pass the ControlId in J-Query to sor the items in that control and I am not able to get the control id as it;s modalk dialogue box.
Can you please explain further here, also let me know in case I am wrong in my understanding.
Thanks !!!
Sachin Vashishth MCTS

Dynamic DNS (via DHCP) out of the box?

Greetings!
I was just wondering... Does OS X support Dynamic DNS updates out of the box?
I can't seem to find any confirmation if 10.5 uses bootpd (which I think it does), and if bootpd supports dynamic DNS updates with the named service built into Leopard Server. There don't seem to be any options in Server Admin to enable this... So I'm a little hazy as how to enable dynamic DNS without compiling my own version of ISC-DHCP.
Just for clarification here; what I'm looking for is the ability to update a DNS zone with a PTR/A record(s) of machines that send a hostname as a part of retrieving a IP address from a DDNS-enabled DHCP server. Ie, "mybox" requests IP from DHCP server, DHCP server updates "mydomain.tld" with a record for "mybox", so that "mybox.mydomain.tld" is resolvable afterwards by the machines on this subnet.
Cheers,
-SC

This is a strange topic because implementing Dynamic DNS on Mac OS X Server looks like it should be child's play... so why hasn't Apple done it? Could it simply be that Apple sees no need for it at this time? Mac OS X clients don't need it to sit happy with a Mac OS X Server. Neither do Windows clients using a Mac OS X Server PDC.
Apple has implemented Dynamic DNS client support into the Active Directory Plug-in in Leopard. In this environment, of course, the client's DNS server is most likely to be an Active Directory-integrated DNS server which happily support DDNS. Unfortunately this Dynamic DNS facility is not immediately available to those not using the Active Directory plug-in.

In search of assistance learning how to modify the mail message from an out of the box SP2010 approval workflow.

So, I have found the article
http://punaro.com/2012/01/derek/modifying-a-sharepoint-2010-workflow-email/comment-page-1/ which appears to walk through the process of modifying an out of the box workflow's mail message.
However, there is a basic problem that I run into before I get started.
I am logged into the system as a regular user (ie not a farm admin, etc.).
I do, however, have full control on the site on which I am working.
I create a custom list.
I create a simple one step approval - sharepoint 2010 out of the box workflow.
I start SharePoint designer and give it the URL of the list. It opens up and I see the various objects on the left side of the screen.
I click right on the Workflows object - which is where the article says I will find the ability to copy and modify the workflow.
All I see is "open", "open in a new tab" and "Pin".
I selecdt open in a new tab - and I get a blank screen labeled workflows that says "There are no items to show in this view".
So, I click on Lists and Libraries, then on the name of my custom list.
When the list displays, the Workflows section of the page has a "Modified Workflow" displayed.
When I right click on it, no menu is shown. When I click on the modified workflow, I get the workflow settings page for that workflow.
I am trying to figure out how to create the copy of the workflow so that I can modify one of the mail messages in SharePoint designer.
Is there someone who has some advice on how to find this copy and modify option? Or perhaps a web site, web forum, article series, or book covering the topic?
Thank you!

Hi lwvirden,
According to your description, my understanding is that you want to modify the OOB approval workflow in SharePoint Designer.
After opening the site in SharePoint Designer, just click Workflows in the left panel and then the workflows in the site will load in the right part.
If you want to copy and modify the OOB approval workflow, then you need to right the approval workflow
Approval – SharePoint 2010 under Globally Reusable Workflow. After that you will see the
Copy and Modify button.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Out of the box sharepoint online 2013 workflow

Hi All,
I have a workflow that sends a email to a user after creating a new document.
Now a want to attach a document to this email but this is not possible with the out of the box SharePoint 2013 solution. I use the SP 2010 workflow because I need to send a email to an external user.
Is there a solution that I can use to attach a document to a email in a workflow?

Not possible out of the box. Just curious why would you want to email someone files over the email? I think the logical way is to simply send the item link. This will show user the item details and attachments.
Anyways, If that's the way you want to do it then check the following codeplex solution out.
http://spdactivities.codeplex.com/
I would still recommend you to send the current Item URL in the email instead of sending document as an attachment.
If this helped you resolve your issue, please mark it Answered

Out of the box approval workflow suddenly failed on start (retrying)

SharePoint 2010. I've been using out of the box approval workflow for several month now. I did some minor changes to it, like to who and when emails should be send, but that's all.
Then out of a sudden it stopped working. New request status is "Failed on start (retrying)". Sometimes (!) status is "In Progress", but no tasks are created. In both cases there is nothing on workflow history and error report is also empty
(it even cause an error "Report contains no data").
I'm sure that I didn't change anything in a workflow. The only think that I changed was an InfoPath form, but I only added there field "Created By", so I would see in calendar later who created this request. I couldn't see how this might affect workflow
process.
I'm confused as I don't even know where to start searching for the solution. Why this might happen? Any ideas are very welcome!

In my list I have a multiple choice field which is not required. When it was
blank my workflow was failing on start! This field was not involved in a workflow directly, I included it only in the email to approver. When I deleted it from an email everything was fine.

Is iview considered out of the box?

Similar Messages

Maybe you are looking for