Is iweb09 available on server osx 10.8.4?

is iweb09 available on server osx 10.8.4?

iWeb is not a component of Mac OS X; it's a component of iLife. If your computer shipped with a client version of Mac OS X 10.6.8 or earlier, iWeb will be on its original disks. Otherwise, buy an iLife 09 or 11 DVD.
(87079)

Similar Messages

What is the latest update available for Mac OSX 10.5.8 that will allow me to get the latest update for iTunes. I really need to update my iPhone and CAN'T!! GRRRR!!!

What is the latest update available for Mac OSX 10.5.8 that will allow me to get the latest update for iTunes. I really need to update my iPhone and CAN'T!! GRRRR!!!

Minimally you need Snow Leopard or greater:
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

SCCM 2012 -OS images not transfering to DP ERROR Detail will be available when server finishes processing the message

I am having issue with some application, packages, and images pushing from my Primary SCCM server to the secondary servers and DPs.
I am thinking that the issues are all related so I am going to just talk about the image that I am having a problem with push.
The image has successfully transfered to the Primary site, and secondary sites, but it is having a problem with a DP. The error that shows up in "Content Status" says "Detail will be available when server finishes processing the
messages". All the servers are 2008 R2 server, with SCCM 2012 SP1.
I would take a look at logs for this, but I am pretty new to SCCM, and I'm not sure which log to look at for additional information.
Thank you for any help that can be provided.

The logs pointed me to an error about the Pull DP settings. I think the issue is that I have the images stored on the Primary site, and the DP does not have the Primary site in its Pull DP settings tab. I unchecked the option, and it appears to be working
now. Thank you

TS4006 "Is the Find my Mac feature available for an OSX 10.7.4 MacBook?"

Is the Find My Mac feature available for an OSX 10.7.4 MacBook?

Here's the troubleshooting section you referred me to, and the response;
The date on your device is incorrect. This can be set in Settings > General > Date & Time.
I have verified the time and date
Your device is not up to date. It needs to have iOS 5 or later.
It's a MacBook using OSX 10.7.4
Your iCloud account is not configured on your device. Enter your iCloud account information in Settings > Mail, Contacts, Calendars.
When I try to do this, I get into the loop that I will try to describe more completely below:
1. In System Preferences, I select iCloud, where I have only one option - "Move to iCloud" I click on that sole option.
2. I'm taken to www.me.com/find page, where I Log In using my Apple ID and then I see a very large statement, "To use Find My iPhone, go to iCloud.com." - with only one button available - "Open iCloud.com" - I click on that sole option.
3. I'm asked to enter my user name and password again, which I do
4. The page that occurs next is a secure iCloud site - https//:www.icloud.com/#find
5. My iPhone and iMac are listed under "My Devices," but not the MacBook.
I can see no opportunity to enable "Find my Mac" the MacBook, because Preferences/iCloud leads me back into the loop described above.
You have multiple iCloud accounts entered on your iPhone, iPad, or iPod touch. Only one account can have Find My iPhone turned on at a given time. Log in to Find My iPhone with your other iCloud accounts until your device is listed.
I have viewed my Apple ID account and can find no sign of multiple iCloud accounts.
You have already initiated a wipe of the iPhone, iPad, or iPod touch. The device will not appear on the page until it is reconfigured with your iCloud account information.
I have not "wiped: the MacBook, and don't see how this could be the problem.
There is scheduled maintenance or another issue affecting Find My iPhone. Check iCloud Support to see if this is the case.
iCloud support indicates that the system is operating fully.
Your device has lost network connectivity. If you have access to your device and it appears to have an active Internet connection, enable and then disable Airplane mode. If you continue to have issues, turn the device off and back on.
It's a MacBook with a good WiFi connection to a known system. There is no Airplane mode on the MacBook.
Find My Mac can only locate your Mac if it is connected to an internet via a known Wi-Fi network. If your Mac is connected to the internet only by an ethernet cable, Find My Mac will not be able to locate your Mac.
Again, it is connected to a known WiFi system - my house. It's the same system that my iMac is connected to, and the iMac appears as a listed Device in iCloud "Find My Phone"
To be sure, I ran Disk First Aid and restarted my MacBook, and also ran Repair Disk Permissions twice.
Same symptoms have not been resolved.

Kernal Panic upon Boot from Server OSX 10.4 Install DVD Disk

I'm getting Kernal Panic upon booting from Server OSX 10.4 Install DVD Disk.
I wanted to statup from the install DVD to do a repair permissions and repair disk and i'm getting a kernal panic screen. Anyone know why?
Using a Dual 2.3 GHz Power PC G5, OSX 10.4.10, working fine.
Will no longer boot from dvd disk, not even install cds.
Tried other macs same deal, I can't belive that both sets of disks went bad.
Dual 2.3 GHz Power PC G5 Mac OS X (10.4.10) 2 GB SDRAM

Hi moeminator-
You can start the server in FireWire target disk mode and use the drive in the Power Mac to do the deed.
Luck-
-DaddyPaycheck

Installation of Preferences Pane on remote Server OSX fails

On an OSXServer mini which I connect to with RDC, I am unable to install any Preference Pane programs such as Slink or Squeeze.
I have full admin access to that machine, it's a dedicated database server, nothing exotic running on it, latest OS10.6.4, but I get the message;
"You can't open the xxx Preferences Pane because it is not available to you at this time. To see this preference pane, you may need to connect a device to your computer."
There is no mouse or screen connected to this mini, RDC access only.
The PrefPane icons become visible but remain greyed out.
Remote Management is activated in the ServerAdmin.
A very similar configuration hosted elsewhere gives no problem. Same settings, same RDC access, same OS.
At this point I'm at a loss. Clues anyone?
TIA,
Peter

The problem isn't the filesystem per se. It's bad software quality if pathnames defined wrong or multiple times with different notation. Often there is only one or two letters with the wrong upper or lower case. I guess in the current Flash installer this is the case. With the previous versions I had no problems.
Am 03.11.2013 um 00:41 schrieb Mike M <[email protected]>:
Re: Installation of Flash Player 11.9 under OSX fails with case-sensitive filesystem!?
created by Mike M in Installing Flash Player - View the full discussion
My Mini isn't case sensitive, so I can't really say but I had two iMacs when I worked at Intuit that were case sensitive and they had all kinds of software installation issues. One of the Mac developers at Mountain View told me that Case Sesnitive shouldn't be chosen as a format except when a system is isolated and used as a testing server. For a workstation or home computer, it's a terrible choice for a setup.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5809947#5809947
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5809947#5809947
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5809947#5809947. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Installing Flash Player at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Cannot Connect to Server OSX 10.8

Please be patient, I am new to server administration.
I had set up a Mac Mini (mid 2011) running lion and lion server as a home server for Time Capsule, file sharing, and itunes home sharing. Everything worked fine In April.
It seems a system update knocked the server off and I could not connect to it. (ARD or VNC). I checked forums and tried a bunch of things, but could not get it working. Hoped Mountain Lion would fix it, but it did not help.
Cannot connect to server through VNC or ARD. (Can connect from server to laptop, but not laptop to server). Cannot connect to server through Finder (afp://with ip address) or just connecting to shared file location on the Finder. All things I had been able to do.
Time Machine on my laptop cannot see the Time Capsule set on my server.
Currently running Mountain Lion with OSX Server 10.8. File sharing turned on in server settings and also in the sharing settings under my preferences. Remote management turned under sharing settings also.

So I verified the computer firewall was turned off. Then I turned off the server firewall settings through the command line, restarted the computer, and the server was available to control under ARD and VNC.
I am going to update my data files, then make a bootable copy.
Thank you for reminding me to doublecheck the firewall.

"Waiting for printer to become available" LaserJet 3390 OSX 10.8.5

I have had my LaserJet 3390 for years and it has worked great. I have a MacBook Air running OSX 10.8.5. According the the documentation I've seen, I can't download a specific driver, but there is a set of HP drivers that gets installed and updated through the Mac's Software Update. Occasionally, I see an HP printer driver update. After I installed the last one (I think it started soon after, but not just after) I started getting the "Waiting for printer to become available" message that never seems to clear. I can't print a thing. Very frustrating!
I've tried:
1) Repair disk permissions, delete the printer, reinstall the printer. No dice.
2) I've looked in Software Update to either reinstall the HP printer drivers or to install a previous version. No dice--can't find it anywhere.
Any advice?

I am really sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Service MSExchangeMailSubmission. There is no available HubTransport server in the local site.

I have found this and a number of other errors in my Exchange Organization after failed attempted DR exercise.
I will list a few:
The Microsoft Exchange Mail Submission service is currently unable to contact any Hub Transport servers in the local Active Directory site. The servers may be too busy to accept new connections at this time.
Attempt to move active database 'XXXMailDB' from 'active.mail.server' to 'failed.mail.server' failed. Move comment: None specified.
Error: An Active Manager operation failed. Error The database action failed. Error: An error occurred while trying to validate the specified database copy for possible activation. Error: Server 'failed.mail.server' has been stopped. To start this server, use
Start-DatabaseAvailabilityGroup..
Database redundancy health check failed.
Database copy: XXXArchiveDB
Redundancy count: 1
Error: Passive copy 'XXXArchiveDB\FAILED.MAIL.SERVER' is not UP according to clustering.
Name Status RealCopyQueu InspectorQue ReplayQueue CIState
e ue
XXXArchiveDB\ ServiceDown 0 0 0 Unknown
FAILED.MAIL.SERVER
XXXArchiveDB\ Dismounted 0 0 0 Failed
ACTIVE.MAIL.SERVER
===============
Full Status
===============
Identity : XXXArchiveDB\FAILED.MAIL.SERVER
Name : XXXArchiveDB\FAILED.MAIL.SERVER
DatabaseName : XXXArchiveDB
Status : ServiceDown
MailboxServer : FAILED.MAIL.SERVER
ActiveDatabaseCopy :
ActivationSuspended : False
ActionInitiator : Unknown
ErrorMessage : A server-side administrative operation has f
ailed. The Microsoft Exchange Replication se
rvice may not be running on server FAILED.MAIL.SERVER
.XXX.local. Specific RPC error message: Erro
r 0x71a (The remote procedure call was cance
lled) from cli_GetCopyStatusEx2
ErrorEventId :
ExtendedErrorInfo :
SuspendComment :
SinglePageRestore : 0
ContentIndexState : Unknown
ContentIndexErrorMessage :
CopyQueueLength : 0
ReplayQueueLength : 0
LatestAvailableLogTime :
LastCopyNotificationedLogTime :
LastCopiedLogTime :
LastInspectedLogTime :
LastReplayedLogTime :
LastLogGenerated : 0
LastLogCopyNotified : 0
LastLogCopied : 0
LastLogInspected : 0
LastLogReplayed : 0
LogsReplayedSinceInstanceStart :
LogsCopiedSinceInstanceStart :
LatestFullBackupTime :
LatestIncrementalBackupTime :
LatestDifferentialBackupTime :
LatestCopyBackupTime :
SnapshotBackup :
SnapshotLatestFullBackup :
SnapshotLatestIncrementalBackup :
SnapshotLatestDifferentialBackup :
SnapshotLatestCopyBackup :
LogReplayQueueIncreasing : False
LogCopyQueueIncreasing : False
OutstandingDumpsterRequests :
OutgoingConnections :
IncomingLogCopyingNetwork :
SeedingNetwork :
ActiveCopy : False
Identity : XXXArchiveDB\ACTIVE.MAIL.SERVER
Name : XXXArchiveDB\ACTIVE.MAIL.SERVER
DatabaseName : XXXArchiveDB
Status : Dismounted
MailboxServer : ACTIVE.MAIL.SERVER
ActiveDatabaseCopy : ACTIVE.MAIL.SERVER
ActivationSuspended : False
ActionInitiator : Administrator
ErrorMessage :
ErrorEventId :
ExtendedErrorInfo :
SuspendComment :
SinglePageRestore : 0
ContentIndexState : Failed
ContentIndexErrorMessage : Microsoft Exchange Information Store service
exited for database {XXXXXXX-XXX-XXXX-XXX
X-XXXXXXXXXXX}.
CopyQueueLength : 0
ReplayQueueLength : 0
LatestAvailableLogTime :
LastCopyNotificationedLogTime :
LastCopiedLogTime :
LastInspectedLogTime :
LastReplayedLogTime :
LastLogGenerated : 0
LastLogCopyNotified : 0
LastLogCopied : 0
LastLogInspected : 0
LastLogReplayed : 0
LogsReplayedSinceInstanceStart : 0
LogsCopiedSinceInstanceStart : 0
LatestFullBackupTime :
LatestIncrementalBackupTime :
LatestDifferentialBackupTime :
LatestCopyBackupTime :
SnapshotBackup :
SnapshotLatestFullBackup :
SnapshotLatestIncrementalBackup :
SnapshotLatestDifferentialBackup :
SnapshotLatestCopyBackup :
LogReplayQueueIncreasing : False
LogCopyQueueIncreasing : False
OutstandingDumpsterRequests : {}
OutgoingConnections :
IncomingLogCopyingNetwork :
SeedingNetwork :
ActiveCopy : True
Failed to save admin audit log for this cmdlet invocation.
Organization:
Log content:
Subject: DOMAIN.LOCAL/DOMAIN User Accounts/Service Accounts/Systems Admins/USERID : Set-DatabaseAvailabilityGroup
Body:
Cmdlet Name: Set-DatabaseAvailabilityGroup
Object Modified: VANDAG01
Parameter: WitnessServer = vandagw01.DOMAIN.LOCAL
Parameter: AlternateWitnessServer = edmdagw01.DOMAIN.LOCAL
Parameter: Identity = VANDAG01
Caller: DOMAIN.LOCAL/DOMAIN User Accounts/Service Accounts/Systems Admins/USERID
Succeeded: False
Error: Microsoft.Exchange.Cluster.Replay.DagTaskSetDagNeedsAllNodesUpToChangeQuorumException: A database availability group administrative operation failed. Error: The operation needs to change the quorum type and all database availability group members need
to be running. The following members aren\'t running: FAILED.MAIL.SERVER.
Run Date: 2014-10-08T06:50:32
OriginatingServer: ACTIVE.MAIL.SERVER (14.03.0178.000)
Error:
Microsoft.Exchange.Data.Storage.ConnectionFailedTransientException: Cannot open mailbox /o=DOMAINmail/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=ACTIVE.MAIL.SERVER/cn=Microsoft System Attendant. ---> Microsoft.Mapi.MapiExceptionNetworkError:
MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80040115, ec=-2147221227)
Diagnostic context:
Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: ACTIVE.MAIL.SERVER.DOMAIN.LOCAL
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -545057711
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
Lid: 45169 StoreEc: 0x824
Lid: 44273
Lid: 59431 EMSMDB.EcDoConnectEx called [length=181]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x0][length=56][latency=15]
Lid: 25964 StoreEc: 0x824
Lid: 38951 EMSMDB.EcDoDisconnect called [length=8]
Lid: 55335 EMSMDB.EcDoDisconnect returned [ec=0x0][length=12][latency=0]
Lid: 36081
Lid: 52465 StoreEc: 0x80040115
Lid: 60065
Lid: 33777 StoreEc: 0x80040115
Lid: 59805
Lid: 52209 StoreEc: 0x80040115
Lid: 56583
Lid: 52487 StoreEc: 0x80040115
Lid: 19778
Lid: 27970 StoreEc: 0x80040115
Lid: 17730
Lid: 25922 StoreEc: 0x80040115
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.ExRpcConnection.Create(ConnectionCache connectionCache, ExRpcConnectionCreateFlag createFlags, ConnectFlag connectFlags, String serverDn, String userDn, String user, String domain, String password, String httpProxyServerName,
Int32 ulConMod, Int32 lcidString, Int32 lcidSort, Int32 cpid, Int32 cReconnectIntervalInMins, Int32 cbRpcBufferSize, Int32 cbAuxBufferSize, Client xropClient, Byte[] clientSessionInfo, TimeSpan connectionTimeout)
at Microsoft.Mapi.MapiStore.OpenMapiStore(String serverDn, String userDn, String mailboxDn, Guid guidMailbox, Guid guidMdb, String userName, String domainName, String password, String httpProxyServerName, ConnectFlag connectFlags, OpenStoreFlag
storeFlags, CultureInfo cultureInfo, Boolean wantRedirect, String& correctServerDN, ClientIdentityInfo clientIdentity, String applicationId, Client xropClient, Boolean wantWebServices, Byte[] clientSessionInfo, TimeSpan connectionTimeout)
at Microsoft.Mapi.MapiStore.OpenMailbox(String serverDn, String userDn, Guid guidMailbox, Guid guidMdb, String userName, String domainName, String password, ConnectFlag connectFlags, OpenStoreFlag storeFlags, CultureInfo cultureInfo, WindowsIdentity
windowsIdentity, String applicationId)
at Microsoft.Exchange.Data.Storage.MailboxSession.ForceOpen(MapiStore linkedStore)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Storage.MailboxSession.ForceOpen(MapiStore linkedStore)
at Microsoft.Exchange.Data.Storage.MailboxSession.Initialize(MapiStore linkedStore, LogonType logonType, ExchangePrincipal owner, DelegateLogonUser delegateUser, Object identity, OpenMailboxSessionFlags flags, GenericIdentity auxiliaryIdentity)
at Microsoft.Exchange.Data.Storage.MailboxSession.<>c__DisplayClass12.<CreateMailboxSession>b__10(MailboxSession mailboxSession)
at Microsoft.Exchange.Data.Storage.MailboxSession.InternalCreateMailboxSession(LogonType logonType, ExchangePrincipal owner, CultureInfo cultureInfo, String clientInfoString, IAccountingObject budget, Action`1 initializeMailboxSession, InitializeMailboxSessionFailure
initializeMailboxSessionFailure)
at Microsoft.Exchange.Data.Storage.MailboxSession.CreateMailboxSession(LogonType logonType, ExchangePrincipal owner, DelegateLogonUser delegateUser, Object identity, OpenMailboxSessionFlags flags, CultureInfo cultureInfo, String clientInfoString,
PropertyDefinition[] mailboxProperties, IList`1 foldersToInit, GenericIdentity auxiliaryIdentity, IAccountingObject budget)
at Microsoft.Exchange.Data.Storage.MailboxSession.ConfigurableOpen(ExchangePrincipal mailbox, MailboxAccessInfo accessInfo, CultureInfo cultureInfo, String clientInfoString, LogonType logonType, PropertyDefinition[] mailboxProperties, InitializationFlags
initFlags, IList`1 foldersToInit, IAccountingObject budget)
at Microsoft.Exchange.Data.Storage.MailboxSession.OpenAsSystemService(ExchangePrincipal mailboxOwner, CultureInfo cultureInfo, String clientInfoString)
at Microsoft.Exchange.ProvisioningAgent.MailboxLoggerFactory.XsoMailer.Log(AdminLogMessageData data, LogMessageDelegate logMessage)
at Microsoft.Exchange.ProvisioningAgent.AdminLogProvisioningHandler.OnComplete(Boolean succeeded, Exception e)
The server could not communicate with the HUB transport running locally. (by locally I mean same server - localhost)
I appreciate any input as to where/what can be the issue. We have had issues in the past while trying to run our yearly DR testing, but none like this.
Thanks!
Ozz.

Hi Ozz,
From your description, I recommend you follow the steps below for troubleshooting:
1. Confirm that the networks are identically configured between all DAG node members.
2. Use the following cmdlet to start the failed Mailbox server and check the result.
Start-DatabaseAvailabilityGroup -Identity "DAG name" -MailboxServer "failed.mail.server"
For your reference:
Start-DatabaseAvailabilityGroup
http://technet.microsoft.com/en-us/library/dd335076(v=exchg.141).aspx
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support
First of all thanks for the answer.
Let me give you a better view of our situation.
This was discovered during a staged disaster recovery exercise. All our nodes are VMware VMs.
The (primary site or site A)  FAILED.MAIL.SERVER was shutdown from the VMware console as it would
happen with a power outage or worse. The Witness server was also shutdown in the same manner. We then had the ACTIVE.MAIL.SERVER
(that meaning the only server running) and the Alternate Witness, on site B.
Initially when the 'failure' was caused the DB mounted right away on the ACTIVE.MAIL.SERVER
then after a bit of time we got all the errors regarding Hub Transport such as:
"The Microsoft Exchange Mail Submission service is currently unable to contact any Hub Transport servers
in the local Active Directory site. The servers may be too busy to accept new connections at this time."
Then after a reboot all the errors persisted and the ACTIVE.MAIL.SERVER
albeit having a running Transport Service still could not communicate via MAPI with the DB. It was still trying to use the FAILED.MAIL.SERVER's
Hub Transport.
That is my understanding of the errors and issues.
As for item #2 can you please explain in more detail what that would do if the FAILED.MAIL.SERVER
is down?
Does that change anything on the ACTIVE.MAIL.SERVER?
Thanks for your help!!!
P.S. - One more detail, this is in production so I cannot test during business hours, I tried exactly the
same operation on our test environment and everything came up as expected... o_0

Amplitube is not available after upgrading OSX 10.4.8 to 10.5.4

Hi I have enjoyed using Amplitube X-gear (with Amplitube 2.0, Metal, Hendrix and Amplitube Live) for months. I have upgraded to OSX 10.5.4 recently. Now only Amplitube Jimmy Hendrix is available in Logic. I installed the latest updates for Logic and now running 8.02. I have just checked Garageband... and there is no problem. The entire Amplitube set is ok, all available in Garageband. Any idea...?

I just did as you said. I have run preferences/audio units manager and re-scanned ... i had to force them to recheck. No, when I open a project that uses Amplitube Logic doesn't give me a warning about Amplitube not being available. Instead in the channel strip/inserts drop down menu/audio units/[incompatible]/IK Multimedia/Amplitube...
Funny, but it works. Is there any way i could fix this, i mean go back to normal. I don't want to have any trouble with htis when working...?

The Security Token Service is not available -- SP Server on Windows 7

I just installed SharePoint Server 2010 on a Windows 7 workstation with the aim of setting up a development environment.
Installed all the prerequisites, then SP, everything seemed to go smoothly.
However, the Health Analyzer is warning my that "the Security Token Service is not available". It says that the "Administrator should try to restart the Security Token Service"
I looked under Services for my computer and also looked in IIS, did not see any thing that referenced security tokens. Where would I find the security token service?
Thanks.

No.
In Central Admin>Application Management>Manage Service Applications I see the
Security Token Service Application is running. But the health analyzer is still saying that
The Security Token Service is not available.
Any advice on resolving this would be greatly appreciated.

WL6.x: Order of services availability on server start

Hi all,
I am experiencing a problem with my application which is related to the
order that WebLogic uses to start it's internal services. Basically what
I'm trying to do is to access a t3-file-system in a startup-servlet to
read some configuration information. The problem is that the
t3-file-systems will be activated / deployed after the ear which
contains the startup-servlet.
What I'm doing right now is to schedule a trigger in the startup-servlet
and retry the initialization until the file-system is available. While
this works fine in principle, I get a problem on redeploy
(ClassCastExceptions) - probably loading the weblogic specific classes
from the system classpath keeps the unloading of ear classes from
working correctly.
That's why I am wondering, if there is any particular need to deploy
this "server-infrastructure" after user-defined components have been
deployed. Wouldn't it be possible to delay the deployment of
web-applications, ejb-jars and ears until all the connection pools, file
systems etc. have been deployed and are ready for usage?
Thanks for your opinions,
Daniel

Stopping the applications in following order:
"Hyperion S9 BI+ 9.3 Financial Reporting Web application"
"Hyperion S9 BI+ 9.3 Workspace"
"Hyperion S9 BI+ 9.3 Financial Reporting Scheduler Server"
"Hyperion S9 BI+ 9.3 Financial Reporting Report Server"
"Hyperion S9 Administration Services "
"Hyperion S9 BI+ Analytic Services 9.3.1 - Hyperion"
"Hyperion S9 Shared Services"
"Hyperion S9 OpenLDAP"
Start the applications in following order:
"Hyperion S9 OpenLDAP"
"Hyperion S9 Shared Services"
"Hyperion S9 BI+ Analytic Services 9.3.1 - Hyperion"
"Hyperion S9 Administration Services ATS5"
"Hyperion S9 BI+ 9.3 Financial Reporting Report Server"
"Hyperion S9 BI+ 9.3 Financial Reporting Scheduler Server"
"Hyperion S9 BI+ 9.3 Workspace"
"Hyperion S9 BI+ 9.3 Financial Reporting Web application"
Regardz
Cnee

High availability xMII server configuration copy

We are setting up two xMII servers in a Hight Availability configuration. What files/directories do I need to ensure are copied between the main and backup servers so that the configuration is completely duplicated between them? I know I can copy the entire Lighthammer directory but that is kind of a brute force method. What is the more elegant approach?

Please refer to the
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/30f43a39-be98-2910-9d9c-a59785f44e41">xMII Best Pratices Guide</a>
Please also note the file SystemConfig.xml found in LighthammerIlluminatorConf
contains the Security Server URL of the machine.
Regards,
Jamie

Server OSX 10.5.1 install question

I have an older Mac Server dual 1.0 ghz with 1.5gb Ram. It has a cd drive so I'm connecting it through firewire to a G4 I have. I set the server to firewire mode by holding down the T key during boot then boot off the server CD on the G4. Once the install comes up it says that I don't have enough ram. I figure I could have it select the server to install on but it does seem to allow that. I've tried using Disk Utility and it sees the Mac Server but I'm not sure how to get the installer to load on to it? Can someone please point me into the right direction? Is there a better way through an external firewire drive?
Thanks,
RJR

You can clone the installation DVD to a firewire drive and then boot from the firewire drive to perform the install. That may be the easiest method if you have an available firewire drive. If you have another server, you can make the DVD into a NetBoot image and do a network install.

Mac mini server osx server to normal 10.8.4?

I want to buy a second hand mac mini i7 2.ghz mid 2011 model which im almost sure is a server. If it comes with the server version of osx 10.8.4 is it possible to get the operating system to run like a normal mini?

Yes it is.
If it comes with OS X Server installed, you have two choices.
Reboot into the Recovery HD and reinstall Mountain Lion. Then do not install the OS X Server app.
With the OS as is, turn off all the servcies within OS X Server app, move the OS X Server.app to Trash and delete the /Library/Server folder.

Is iweb09 available on server osx 10.8.4?

Similar Messages

Maybe you are looking for