Is J2EE supported win'95, win'98 platform?

Which operating system is needed to run J2EE? Does it support Win'98 or
one has to move to WIN NT?
I am not able to launch J2EE server on win'98 platform.
Thanks in advance
Sakina

Hi,
I have run J2EE on Win98 without any problems, although NT4.0 can/ was a source of problems at times especiallly connecting to Access database. I am now running Win2000 also, and I think this is a brilliant updated version of nt4. Recommend using cloudscape or I have now set up MySql as database system. Access is fine for testing, not much else!
Never tried it on win95.
I have been using j2ee v1.2.1 rather than 1.3
Hope this helps.
best kev

Similar Messages

  • I cant download Firefox 7 into Windows 7- says it does not support win/32, but I have a 64 system

    I wanted to download Firefox 7 and after it downloads, I cant open it as it says it wont support win/32, but I have 64 system.

    You should not be paying for firefox, delete whatever the file is and run malware checks on your computer.
    Obtain a proper version of firefox from say getfirefox.com for free and install that.
    * presumably you are using Windows (your system info, aside, suggests you are using IE ) see [[installing firefox on windows]]
    * and [[is my firefox problem a result of malware]]
    See also
    * http://www.mozilla.org/en-US/legal/fraud-report/index.html
    Which includes
    Please use this form to report any websites or mobile app stores that are:
    Distributing harmful products under Mozilla brands such as Firefox.
    Charging for Firefox, Thunderbird, or any of the Mozilla products.

  • Please help me, i need all driver HP ENVY m6-010dx support win 7 64 bit

    please help me, i need all driver HP ENVY m6-010dx support win 7 64 bit. 

    Double post
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • PLEASE HELP ME, I NEED ALL DRIVER HP ENVY M6-K010DX SUPPORT WIN 7 64 BIT

    please help me, i need  all driver HP ENVY m6-k010dx support win 7 64 bit

    Hi:
    Try the W7 x64 drivers and software from this model which has the same processor.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=6545...

  • Starting weblogic cluster and admin server on Win 2000 platform

    Hi! Here's my problem scenario:
    I'm running my WLS 8.1 application as WLS cluster on Win 2000 platform. I have
    3 replicated WLS servers in my cluster and of course one WLS server as admin server
    (4 WLS servers all together). I'm starting my WLS application using Win services
    which behind a scene call win 2000 comand interpreter batch-file to start the
    servers. Currently I have 4 different win 2000 services each calling different
    batch-files to start a WLS server (4 all together). Here's my question:
    Is there any way to start my cluster (3 managed WLS servers) and WLS admin server
    from single win 2000 command file (using single win 2000 service). Using win 2000
    AT-command interpreter command I can start executables and command(s) and command-files
    at background at specific date and time, but I want to start my WLS application
    on every win 2000 platform boot, is there any way to achieve this ???
    Best Regards!
    Jami

    hi,
    Thanks for stepping up!
    But I wasn't using any clustering or loadbalancing.
    Just a simple Admin server, Managed server set up.
    256 Meg, Pentium box running Win 2000 premium edition.
    I tried tweeking around the heap size too.... coz' the operations were slogging
    like anything...
    Bal
    "Raja Mukherjee" <[email protected]> wrote:
    It seems like network issue....do you have Windows Clustering/Load Balancing
    service turned on by any chance? I would also use netmon to see the traffic
    between the ips....
    ..raja
    "Bala" <[email protected]> wrote in message
    news:3b3a6c00$[email protected]..
    hi,
    I am looking at a strange behaviour with WLS6.0SP1 installed on WINDOWS2000 Premium.
    I brought up the Admin server and a Managed server. After a while theAdmin Server
    is compeletely
    losing the control of the managed server (for no reason).
    when I tried monitoring the managed server from the console, I couldnot
    access
    the manager server
    and the status down (red ball). I tried restarting the Admin Server
    in the discover mode - NO LUCK.
    But when I restart the Managed server and go to the Web Based Admin
    Console and refresh, it worked. But I dont think we should be doingthat
    in a
    production environment.
    Did anybody come across such a problem before ???
    Is this a problem with Win 2000 ???
    coz' it never happened with NT workstation
    thanks in advance

  • Will ECC 6.0 SR3 support  win 2008 server R2 ( windows NT 6.1)

    HI,
    1.  Will ECC 6.0 SR3 support  win 2008 server R2 ( windows NT 6.1),
    2.   Do Ecc 6.0 on  2008 R2 will support oracle 11.2.
    Thanks in Advance
    SApsanthose

    Hi,
    Please see the link below.
    http://www.sdn.sap.com/irj/sdn/windows?rid=/webcontent/uuid/901004e6-15ce-2c10-afa4-ec948139a17c [original link is broken]
    And also SAP note..
    Note 1383873 - Windows Server 2008 R2 Support
    Regards
    Bhuban
    RKFL

  • XI Install - ABAP Support Packs + J2EE Support Package install

    Hi
    I am wondering what is recommended sequence for installing/upgrading kernel, ABAP Support Packages & J2EE Support Packages for XI installation.
    Should we install/upgrade kernel, ABAP Support Packages & J2EE Support Packages before XI 3.0  is installed? Or should we install these only after installing and completing post install steps of XI 3.0.
    The Web AS install guide recommends to install the patches immediately after installing it, but prerequisite for XI install is Web AS SR1 i.e SP9(ABAP + J2EE.
    Any suggestions in this regard would be highly appreciated.
    Regards
    Chandu

    Hi Shravan,
    Thanks for the response.
    I have already gone through the note. According to the note, I assume the following sequence has to be followed:
    Install SAP Web AS (ABAP)
    Install SAP Web AS (Java)
    XI Install & post install steps
    Support Pack Stack for ABAP & Java
    XI Patches
    However, when carrying out post install steps after XI installation, I am unable to perform some steps. Also, there is an issue with J2EE engine after XI install.
    Further, I have installed and completed post install steps as per following successfully:
    Install SAP Web AS (ABAP)
    Install SAP Web AS (Java)
    XI Install
    Support Pack Stack for ABAP & Java
    Post install steps
    XI Patches
    What are the implications of applying ABAP & Java patches before XI install or before completing post install steps.
    Regards
    Chandu

  • Does WebLogic 6.x support Solaris for Intel x86 platform?

    Does WebLogic 6.x support Solaris for Intel x86 platform?
    Thanks,
    Levi

    levi wrote:
    Does WebLogic 6.x support Solaris for Intel x86 platform?
    Thanks,
    See http://edocs.bea.com/wls/platforms/index.html - as far as I
    can tell, it is not supported.
    regards,
    Per Jessen

  • Boot Error: Intel (r) AT Supported system lock due to: platform attack detected: user password

    I have HP ENVY Model 4-1110ET.showing Intel (r) AT Supported system lock due to: platform attack detected. Time left...... Please select one of the following for platform recoery: 1 - User Password 2 - Server Token Password. I forgot my password please help me I am unable to boot my Laptop.

    Hi there 
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that your system is locked due to the anti-theft protection. Please see the following to get the help you need. Telephone Support for the Intel® Anti-Theft Service Provided by McAfee

  • J2EE support in HP-Unix?

    Do any one know what latest versions of the following items are supported by HP-UNIX 10.20
    1. J2EE version?
    2. JDK version? (is it upto 1.1.8 or more??)
    3. JSP version?
    4. EJB version?
    5. servelt version?
    Please advice me.

    First, have a look at the website of HP (www.hp.com). You can download JDK versions for HP-UX there. I know that there is at least a version 1.2.2 JDK for HP-UX. For J2EE support, there are many application servers that work on HP-UX. I've used BEA Weblogic 5.1 on HP-UX, and version 6.0 or 6.1 should also work.
    BEA Weblogic 6.1 supports the newest version of the J2EE API's, upto version 1.3 beta.
    Jesper

  • Why does Auto Tone button in Quick Develop panel fail with Win 7 platform?

    I have been a user of Photoshop since the inception of Photoshop CS.  I recently purchased a subscription to Photoshop CC, which comes with Photoshop Lightroom 5.
    I have never used Lightroom, so I purchased the Kindle version of Adobe Photoshop Lightroom 5, CLASSROOM IN A BOOK.  I have this eBook installed on the same Windows 7 PC that I have Photoshop CC and Lightroom 5 installed on.
    I ran into a problem in a section of the first chapter titled “Using Quick Develop in the Library module.”  This section, in part, instructs how to quickly improve the color tonal balance of an image.
    After selecting the required image from the sample images for this lesson, I found the histogram in my Lightroom 5 Loupe view to be the same as the lesson’s photo illustration for this original image.  As described in the lesson, the photo did not have a balanced tonal distribution.
    I followed the lesson’s instruction:  “4. In the Quick Develop panel, watch the tone distribution curve shift in the Histogram panel as you click the Auto Tone button.  Although the automatic adjustment hasn’t done a perfect job with this particular photo, there is substantial improvement; a lot of image detail has been recovered from the overexposed hair and face and there is more depth in the mid-tones. The contrast, however, remains unimpressive, and the darker areas still look flat.”  (See Adobe Creative Team [2013-08-06]. Adobe Photoshop Lightroom 5: Classroom in a Book [Kindle Locations 1024-1026]. Pearson Education. Kindle Edition.)
    This is where I ran into a problem.  After clicking on the Auto Tone Button in the Quick Develop panel, my results were completely different than what was described and shown in the Histogram displayed in the lesson.  Instead, in my Lightroom 5, clicking the Lightroom Auto Tone button has increased the exposure, making it even more over exposed than the original image!  Therefore continuing to follow the instructions in the lesson was a waste of time, since my Auto Tone results were so totally out of sync from that of the lesson.
    This disturbed me, so I decided to open the same sample image in Photoshop CC, Camera RAW 8.2.  Camera RAW provides an Auto Button which improves exposure and color tonal balance to an image.  The results were exactly the same as the Auto Tone functionality in the Quick Develop panel in Lightroom 5.  I couldn't understand why the lesson instructor's results were so positive and mine were so disastrous.  Then it hit me!  I discovered that the lesson writer of this Adobe Classroom in a Book was using Lightroom 5 on a MAC computer.  I could tell by looking at his lesson images.  Just to be sure, I tried this lesson scenario on a different PC with Win 7, Photoshop CC and Lightroom 5.  I got the same failed results.
    I’ve heard from other professionals that Photoshop and Lightroom software only work properly on Apple computers.  I’ve always thought that this was a myth, but have infrequently experienced a good result using the Auto button feature in Photoshop Camera Raw on a Windows PC platform, so I don’t use it often.
    What really has me frustrated is the fact that Adobe no longer has a direct way to report software defects to their tech support or process improvement  teams.  Their online bug reporting process is woefully inadequate.  I've tried twice to create a support ticket on the Adobe site, only to have my case withdrawn mysteriously.  I've tried their online chat, telephone support, and sent emails with image attachments to the address provided by their agent on the telephone.  My email goes unanswered and my open cases somehow get closed.
    Any ideas on how to get this issue addressed by Adobe are sincerely appreciated.

    Adobe tries to improve the Auto Tone function from time-to-time.  I used to completely underexpose an image that had a few bright spots such as car headlights turned on in an otherwise properly exposed image.  This is probably what you’re seeing, LR now guessing brighter more of the time, and it might change, again, in a future version so don’t be too concerned.  
    As others have said, Auto Tone works on some images and not on others, and Adobe can only try to make it work better on more images by changing how it works on all images.  For the lesson example, the author purposely used an image that was improved with auto-tone that LR did at the time of authorship.   You will never have a picture exactly like the lesson’s example, either, so it’s not that important if the lesson is 100% accurate for future versions of LR, just that the general idea that some pictures are improved in certain ways by Auto Tone will still be applicable, and you’ll need to learn, by trial and error, what to do when Auto Tone doesn’t work well or the image needs further adjustment.  That is the important lesson, what to do with your own pictures.
    You can reset a particular slider after a bad Auto Tone by double clicking on that slider.  The Exposure slider is the one I reset most often. 
    You can also LR set the Auto Tone value for just one slider by holding down the Shift key and double clicking on that one slider.  I do this a lot for the Blacks slider to set the black point, without messing up everything else.

  • Multi processor support Win 7 HP

    Dear experts,
    I'm running a Mac Pro 2 x 2,8 quad core (8 cores in total) and installed Win7 Home premium-64 in a Bootcamp partition. Everything runs fine, except that I noticed that Win 7 does not make use of the 2 processors. It's only seeing 1 processor (4 cores) and as a result, Geekbech shows half the performance I get when running OS-X Lion.
    Is there a way to get WIN7 looking at the other processor also?
    Your help greatly appreciated!
    Ruud

    Hi Hatter,
    The only reason I installed Win7 on my Mac is to support a single application, my Tacx VR home trainer software. I never would have guessed that supporting a home trainer would require a professional edition of Windows.
    Microsoft build the support for multiple processors in Win professional but decided to remove that from the HP version. That is what I call crippling and I think that this is a ridicules decision. Not only driver problems will be an extra bonus when using Windows, even the operating system itself is not supporting your hardware to the fullest.
    I would like to see the chart you are referring to. I could only find a lot of misleading information on this subject. I could even find a Win 7 spec sheet that told me that the HP version offered support for 2 processors!
    Regards, Ruud

  • How to run 10g forms developed on win XP platform from linux based App serv

    dear all,
    I am developing 10g forms being on widows XP platform. I have also used
    both pl/sql and object libraries to develop them.
    Now what i have to do to make these forms work from a 10g application server
    that is installed on linux 4

    thanks for ur reply.
    the problem i am facing now is
    I used to use a specific path in the forms where the
    libs are located.
    but in linux path location identification is different from wins.
    i tried with remove path as well still it can not read the libs.
    waitin for ur reply

  • AE CS5 no longer supports Win Server 2003?

    We have a dozen dual quad Xeon Win Server 2003 boxes which have been running all things CS4 just fine. Today I finally downloaded the AE CS5 demo to check it out on one of the boxes and it appears that AE will install, but won't run. It gives an error basically saying that "The specified program requires a newer version Windows." This is the first time I've any of our 3D/2D software not being able to run on Win Server 2003. Am I missing something or is AE CS5 indeed incapable of running on WS 2003?

    I wouldn't know about "not supported", but it certainly isn't expected or intended. Since it's pre-Vista tech, it would probably qualify for that. That you could install it at al lis probably merely a slippage in teh installer not checking things in this unusual combination...
    Mylenium

  • ITunes fixes / support Win XP 64 BIT - When ?????

    Hi
    Does anyone know when patches / support will be sorted for the issues with iTunes and Win XP (or Vista) 64 BIT ?
    Brand new shiny iPod Nano 8gb and yep music syncs ok, but nothing else -
    no movies, pictures etc
    also cannot restore the iPod.
    I did do the long winded fix for the GEAR Drivers so that iTunes can now import cd's...
    Message always pops up on opening iTunes that it was not installed properly.
    Anyone have any idea when this may be fixed - I can live with most things but the lack of movies makes the new iPod a bit of a waste of time and money.

    gbrdbry wrote:
    Does anyone know when patches / support will be sorted for the issues with iTunes and Win XP (or Vista) 64 BIT ?
    Apple does not announce any future road map to its products. Nobody really does unless they want to risk posting a date that they cannot guarantee on.
    All Apple has commented on is that the current version is not comparable with 64 bit OS. FOr what it's worth, it never has been fully compatible with any 64 bit OS (like xp 64 bit). This leads me to believe that Apple does not feel that the demand for a 64 bit iTnues is not large enough to warrant a re-compile (or whatever may be needed) - Note that this is my opinion only.
    If Apple is working on 64 bit compatibility, they will let us know when it is available for download. We know as much as you do on this matter though.

Maybe you are looking for