Is JavaFX open-source ?
A simple question : Now that the 1.0 version is here, is JavaFX open-source, and if so, under which licence ?
Edited by: Traroth on Dec 4, 2008 7:24 AM
Traroth,
Let me add some details to my previous post.
I think people don't appreciate the effort and difficulties involved in open sourcing a complex piece of software. Questions you have to ask yourself are:
- Who is going the use the open source code and for what purpose? And how does that affect the goals and methodology?
- Which parts of the stack do I own and can I release as open source? And what are the legal implications?
- If there are 3rd party components I can't release - are there open source alternatives to fill the holes?
- Without any alternatives to fill in for the 3rd party components, is the remaining open source code functional enough to be worthwhile?
- What license am I going to use and does that license match the expectations of the open source project?
- What related open source projects do I anticipate to interoperate and integrate with and what are the licensing aspects of that?
- What model of participation and code accessibility works best for the goals?
- How do I ensure the code that is in the open source remains up-to-date and useful?
- Are forks acceptable and if yes, how does that impact the project?
- Do I have resources maintain the open source code base?
- Do I want to build a developer community around the code and if yes, what is the participation model for the community?
- Have you double-checked the code and covered all the legal aspects necessary for a release into the open source?
- etc.
I think you get the idea. If you want to create a successful open source project all these questions need to be answered. And one major issue, as rexguo correctly points out, is that a major component of JavaFX (video and audio support) comes from a 3rd party vendor. Are there open source alternatives that could be used instead? If yes, how can that be implemented? If not, is JavaFX useful without high-performance cross-platform video/audio support?
These are all points that need to be considered. Doing open source right is hard and takes time. That's not to hand-wave or preempt the discussion - it's just a reality.
Hope that helps,
-- Terrence
Similar Messages
-
To the Leaders, Management, and Board of Directors at Oracle Corporation,
We the undersigned formally request that Oracle Corporation release the entire JavaFX Platform as open source software available for modification and reuse by individuals, educators, and corporations.
Open source software has transformed the way that we build and use software. It has increased the educational reach of technology, allowed new and innovative applications to emerge, and spawned the growth of communities dedicated to software philanthropy. Java has been at the forefront of this revolution, providing a platform for open source development, and becoming an open source effort in itself.
JavaFX is an innovative technology built on top of Java that allows the creation of next generation Rich Internet Applications (RIA). We believe that an essential part of the future success of this platform is to release it as open source software. This would increase adoption by companies that fear lock-in or are concerned about technology maturity. It would also make it competitive with other RIA platforms that have embraced the open source model.
We recognize that Oracle Corporation has made a significant investment in JavaFX technology, and continues to grow and extend the platform. We encourage Oracle to continue their investment in the JavaFX platform, including monetization of the platform through training, support, and other professional services. In our estimation, the increased adoption of JavaFX will make the platform even more profitable for Oracle that it currently is as a proprietary technology.
Therefore, we proudly make this request to open source the JavaFX platform in the mutual interest of JavaFX technology and the future success of Oracle Corporation.Sign it at here
[http://steveonjava.com/javafx-petition/|http://steveonjava.com/javafx-petition/]
Edited by: Surikov on Jul 8, 2010 12:23 AMAccording to the wikipedia page on JavaFX: "in the next two months". You just have to be patient and wait for further news. These things take time because before the release is made, it has to be 100% positive that there is no propriety code in there anymore.
-
New, open source JavaFX OSGI framework
First, a disclaimer: this is an open source project I started, and somebody may regard it as advertising (basically, it is ). I'm not sure if it's against forum rules. If so, please delete this thread.
Basically, it's a framework for developing modular applications based on OSGI. It should provide support for building applications for desktop, web and mobile devices. It's called DEMUX Framework. Published under Apache License.
http://demux.vektorsoft.com
So far, support is available for desktop applications based on JavaFX, and mobile apps for Android. Since this is JavaFX forum, I would like some feedback from people who work with JavaFX. Basically, is this something you would find useful and worth spending time developing?
If you have some time to throw away, give it a try. Please note that this is early stage development, so you will probably get frustrated and annoyed, buty ou should get the general idea.
Documentation and some code samples are available on project wiki: http://demux.vektorsoft.com/wiki
Source code for samples is available as part of binary download: https://bitbucket.org/vektorsoft/demux/downloads
Any feedback is welcome.hi,
here's a thought stop spamming this forum with your crap....
A warning to others ignore any links this guy offers, 4/5 of his links so far are connected to spyware.
David. -
Will javafx runtime source code be open?
I wonder if oracle will share the source code of javafx, especially controls. I dont say open source javafx, that is a separate topic. Source code of controls will increase the speed of developing javafx projects.
Why?
All it does is read in some data (a list of example projects), and displays it in a Tree. Each project points to a path containing the application build files that are displayed in an iframe (web version), or an HTML control of some sorts for AIR.
All the worthwhile functionality is sitting in each individual project, most of which (if not all) have browsable source. -
Scene Builder is now Open Source
We're very happy to announce that Scene Builder is now open source, as a part of the OpenJFX project.
The whole Scene Builder functionality is provided, including the SB Kit API (designed for integration of SB features into third party tools) as well as the standalone SB application.
This code is made available under the terms of a BSD-style license, similar to JavaFX samples.
The only part of the product which remains closed is the native packaging/installer code.
Scene Builder source code is located in apps/scenebuilder/ in the OpenJFX repository.
Building and running the Scene Builder application from these sources can be done either of the following ways:
From NetBeans: open the SceneBuilderApp project and run it (you need a JDK 1.8 Java Platform configured)
From the command line:
$ cd SceneBuilderApp
$ ant -Dplatforms.JDK_1.8.home=<path_to_JDK_home> run
As usual your contribution and feedback are welcome.
The Scene Builder team.Thank you for the nice feedback!
Beyond providing SB itself, we indeed hope very much that the code will more largely be useful to the community, as a big JavaFX sample application.
SceneBuilderKit contains the API allowing to integrate SB functionality into the GUI of a third party tool, such as an IDE.
As you probably know, with the 2.0 release, SB code base has been deeply re-factored to make it modular such that each of the Panels (Content, Inspector, Hierarchy, etc...) can be instantiated and brought up independently of the others. So, in a nutshell, the SB Kit API allows to orchestrate the editing of an FXML document and to control the various panels.
SceneBuilderApp contains the code of the SB standalone application. It is itself built on top of SceneBuilderKit, and will provide the all-in-one document window you are now familiar with, as well as top level menu bar, preview in a separate window, preference dialog (not quite there), about dialog, etc… -
Plans to Open Source Identity Manager
Hello all! Are there plans to open-source Identity Manager much as Sun has done for Access Manager (OpenSSO) and Federation Manager (OpenFM). :-)
Best,
--JohnIn next future, Identity Manager will be in open source. But, Access Manager, I don't have news.
Regards. -
Free / open source Closed Captioning software?
I'd like to add closed captions to a feature film I produced. I understand the difference between closed captioning (which is embedded in the video and decoded by the TV) and DVD subtitles, and I would like to add real closed captioning.
Is there any free / open source Mac-compatible closed captioning software I can use to add captions to my feature film and create a .cc file for importing into DVD Studio Pro?
I'm more than comfortable with steep learning curves and X11 interfaces. If I have to use a text editor and timecodes, that's fine too. I just need that .cc file to add true closed captioning to my video, and I don't have the dough for commercial CC software.
Thanks!my company does offer closed captioning as a service, Kelly is correct when he says the software is very expensive. as far as creating a .scc file with a text editor, i don't believe it is possible but i may be wrong. when opening a .scc or .cc file in a text editor, it does look like a bunch of "gobbledygook". but the .cap file that is used to create the .scc or .cc file looks a bit more manageable and could possibly be created without captioning software, again i may be wrong and have never attempted to do it. but say you could do it, you could save a bunch of money by creating the .cap file and giving it to someone who has the software to convert it to .scc or .cc. if that seems overwhelming and want to job it out, you could save some money by transcribing the video yourself which is a significant part of the cost when outsourcing. here is a sample of what a .cap file looks like:
~CPCC6.70~;Upper;PopOn;01;
00:00:48:06³0CEN³WELCOME TO.
00:00:52:08³0CFN³
00:00:53:23³0C2N³(CHOIR SINGING)
00:01:00:26³0C1N³
00:01:25:25³0C1N³I WANT TO SAY HELLO TO\THOSE OF YOU THAT ARE WITH US
00:01:28:24³0C1N³RIGHT NOW ON THE INTERNET\ALL OVER THE WORLD.
00:01:31:17³0C1N³IT'S SO WONDERFUL TO HAVE CHURCH\MEMBERS THAT HAVE MOVED ON.
00:01:35:25³0C1N³I GOT A CALL TWO WEEKS\AGO FROM A FAMILY THAT MOVED -
[Solved] Slow graphics with RS780M and open source ati driver
EDIT: Well this is embarrasing. Guess this is why there's a new comers forum. I assumed since I installed a couple days ago my system was up to date. However, running pacman -Syu updated my kernal and it works fine now. SOLVED (I'm an idiot)
Hello Arch community. I've been using Ubuntu for a couple years so know that my hardware can work well enough with linux. Almost everything works great with arch with little setup, but I'm stumped as to how to setup the graphics card.
I'm attempting to use the open source drivers, either xf86-video-ati or xf86-video-radeonhd (I don't care which I use in the end). I have both installed so I can try out both, assuming that doesn't cause problems. I've never tried using the catalyst driver in arch, so I know I don't have remenents of that causing problems. Right I have gnome working, but when dragging a window, resizing a window, scrolling, or watching a video I can see the screen slowly refresh. It is definetly not right.
Here's the information that might help:
[jake@myhost ~]$ lspci | grep Radeon
01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics]
I've tried various configurations. Right now I'm running without an xorg.conf. This is /var/log/Xorg.0.log from the setup without an xorg.conf
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux myhost 2.6.29-ARCH #1 SMP PREEMPT Wed May 20 07:06:02 UTC 2009 i686
Build Date: 28 May 2009 10:40:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 23 11:58:06 2009
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:5:0) ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] rev 0, Mem @ 0x80000000/268435456, 0x92300000/65536, 0x92200000/1048576, I/O @ 0x00005000/256
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default ati Device 0"
Driver "ati"
EndSection
Section "Screen"
Identifier "Builtin Default ati Screen 0"
Device "Builtin Default ati Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default ati Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
ATI Mobility RADEON M98, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD Graphics, ATI Radeon Graphics,
ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
ATI Radeon Graphics
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:05:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[25] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[26] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[28] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[30] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[31] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[32] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[33] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[34] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[35] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[36] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[37] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[38] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 0000000092300000
(II) RADEON(0): MMIO registers at 0x0000000092300000: size 64KB
(II) RADEON(0): PCI bus 1 card 5 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon HD 3200 Graphics" (ChipID = 0x9612)
(WW) RADEON(0): R600 support is mostly incomplete and very experimental
(--) RADEON(0): Linear framebuffer at 0x0000000080000000
(II) RADEON(0): PCI card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x103c SubsystemID: 0x30f2
IOBaseAddress: 0x5000
Filename: BR28896C.bin
BIOS Bootup Message:
HP_QT8 RS780M DDR2 200e/500m
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0xfffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0xfffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 500000
(II) RADEON(0): Default Memory Clock: 400000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 14320
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
[dri] Disabling DRI.
(II) RADEON(0): using shadow framebuffer
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) RADEON(0): Detected total video RAM=262144K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling disabled
(II) RADEON(0): Max desktop size set to 2560x1600
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 1432, min_out_pll: 64800, max_out_pll: 120000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 500.000000, mclk: 400.000000
(II) RADEON(0): PLL parameters: rf=1432 rd=12 min=64800 max=120000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 69300
HBlank: 135, HOverPlus: 48, HSyncWidth: 32
VBlank: 16, VOverPlus: 3, VSyncWidth: 6
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output HDMI-0 has no monitor section
(II) RADEON(0): I2C bus "HDMI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e40
(II) RADEON(0): Port1:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_KLDSCP_LVTMA
DDC reg: 0x7e50
(II) RADEON(0): Port2:
XRANDR name: HDMI-0
Connector: HDMI-B
DFP1: INTERNAL_UNIPHY
DDC reg: 0x7e60
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
finished output detect: 0
(II) RADEON(0): I2C device "LVDS:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
finished output detect: 1
(II) RADEON(0): I2C device "HDMI-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "HDMI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output HDMI-0 disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1280x800
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Will attempt to use R6xx/R7xx EXA support if DRI is enabled.
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[25] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[26] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[28] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[30] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[31] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[32] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[33] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[34] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[35] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[36] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[37] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[38] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit 80000000 0 0
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x10000000
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 262144 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00640000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00644000
(II) RADEON(0): Will use 6400 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 255712 kb for X Server offscreen at offset 0x00648000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(EE) RADEON(0): Acceleration initialization failed
(II) RADEON(0): Acceleration disabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Textured video requires CP on R5xx/R6xx/R7xx/IGP
Output CRT1 disable success
Output DIG0 transmitter setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
Output DIG0 transmitter setup success
Mode 1280x800 - 1415 816 10
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
freq: 69300000
best_freq: 69298571
best_feedback_div: 813
best_ref_div: 14
best_post_div: 12
(II) RADEON(0): crtc(0) Clock: mode 69300, PLL 69290
(II) RADEON(0): crtc(0) PLL : refdiv 14, fbdiv 0x32D(813), pdiv 12
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output DIG0 transmitter setup success
Output DIG2 encoder setup success
Output DIG2 encoder setup success
Output DIG0 transmitter setup success
Output DIG0 transmitter setup success
Enable CRTC memreq 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
Output DIG0 transmitter setup success
Output CRT1 disable success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 331 x 207
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.1.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event13"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "3"
(**) Option "TapButton3" "2"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1415 800 803 809 816 -hsync -vsync (49.0 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1415 800 803 809 816 -hsync -vsync (49.0 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1415 800 803 809 816 -hsync -vsync (49.0 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
I've also tried it with many xorg.conf files without finding any which give me the same graphics performance I have in ubuntu. Here's the one I was using, with the comments showing some other things I tried.
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "extmod"
Load "dbe"
Load "dri2"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30.0 - 60.0
VertRefresh 55.0 - 70.0
#Option "UseEdidFreqs" "1"
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
Identifier "Card0"
#Driver "radeonhd"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RS780M/RS780MN [Radeon HD 3200 Graphics]"
BusID "PCI:1:5:0"
#Added optimizations
Option "AGPMode" "8"
Option "ColorTiling" "on"
Option "AccelMethod" "EXA"
#Option "AccelMethod" "XAA"
#Option "EnablePageFlip" "on"
#Option "AGPFastWrite" "yes"
#Option "XAANoOffScreenPixMaps" "1"
Option "RenderAccel" "true"
Option "DRI" "On"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
# Option "Composite" "On"
Option "Composite" "Disable"
EndSection
#Section "ServerFlags"
# Option "AIGLX" "On"
#EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Just in case this help:
[jake@myhost ~]$ modinfo radeon
filename: /lib/modules/2.6.29-ARCH/kernel/drivers/gpu/drm/radeon/radeon.ko
license: GPL and additional rights
description: ATI Radeon
author: Gareth Hughes, Keith Whitwell, others.
depends: drm
vermagic: 2.6.29-ARCH SMP preempt mod_unload 686
parm: no_wb:Disable AGP writeback for scratch registers (int)
[jake@myhost ~]$ modinfo drm
filename: /lib/modules/2.6.29-ARCH/kernel/drivers/gpu/drm/drm.ko
license: GPL and additional rights
description: DRM shared core routines
author: Gareth Hughes, Leif Delgass, José Fonseca, Jon Smirl
depends: agpgart,i2c-core
vermagic: 2.6.29-ARCH SMP preempt mod_unload 686
parm: debug:Enable debug output (int)
Any ideas?
Last edited by Coward (2009-06-25 06:40:51)Coward wrote:I can't see a way to mark this thread as solved or anything, but it is solved.
Just click edit on the lower right of your first post and you can edit the subject
http://bbs.archlinux.org/viewtopic.php?id=50161 -
New free/open-source tool to encapsulate the OCI interface
Hello,
Here is a short presentation and a link to a new free tool available on soureceforge.net.
This tool is a powerful "wrapper" to encapsulate the OCI interface:
Introduction
OCILIB is a free, open source and platform independant library, written in C, that access Oracle Databases.
The OCILIB library :
* Encapsulates OCI (Oracle Call Interface which is powerful but complex)
* Hides OCI complexity
* Proposes instead a simple, readable and reusable API
* Offers up to 310 simple and straightforward APIs.
Introduction
Current version : 2.3.0 (2008-03-30)
Main features
* Data binding
* Integrated smart define and fetch mecanisms
* Full Unicode support on all platorms
* Multi row fetching
* Binding array Interface for fast and massive bulk operations
* Reusable Statements
* Connection Pooling
* Global Transactions
* Returning DML feature support
* ROWIDs support
* Named Types (Object types) support (User or Builtin)
* Cursors
* PL/SQL blocks
* PL/SQL Ref cursors and Nested tables
* LOB (BLOBs/ FILEs)
* Supports lobs > 4Go
* Long datatype (piecewise operations)
* Provides "All in one" Formatted functions (printf's like)
* Smallest possible memory usage
* Date/time management
* Timestamps and Intervals support
* Error handling
* Describe database schema objects
* Access columns by index or name
* Hash tables API
* Portable Threads and mutexes API
* Supports static / shared oracle linkage
* Support runtime loading (no OCI libs required at compile / time)
* Great performances (straight OCI encapsulation)
Download
Get OCILIB from OCILIB Project page at Sourceforge Website:
http://orclib.sourceforge.net/
Hope this would help some of you ;D
FrancoisDon't give up just because there are other options out there.
Adobe is only giving up the free tool for education purposes, or unemployed developer. You didn't say if you were one of those.
I believe over time there will be plenty of room for alternate IDE approaches that support the Flex Framework; and in fact there are quite a few options already out there. -
[ANN] XINS 2.1 open source Web Services framework release
XINS 2.1 Web Services Framework has been released.
XINS is an open source Web Services Framework based on simple specifications of the Web Service in XML and
generation of code and documentation from the specification.
The generation includes Client JAR with its Javadoc, Server side template with its Javadoc, documentation in OpenDocument Format,
documentation in HTML including the test forms, WSDL file, unit tests (JUnit) and stubs.
The Web Services accept several protocols including REST, SOAP, XML-RPC, XML, JSON Yahoo! and JSON-RPC.
What's new:
* Start the API with java -jar <api name>.war
* Improved generated specification in OpenDocument Format
* Include/exclude calling convention with ACLs
* New calling convention that maps SOAP request and response as the wsdl2api command mapping.
* Smaller generated build.xml
* Added possibility to include other runtime properties files
* The runtime property location can be a URL
* Swing Graphical User Interface
* New tools: emma, glean, webstart
* New target: javadoc-test-<api name>, javadoc-apis
* Bug fixes and small RFEs
Download XINS 2.1:
Windows installer: http://prdownloads.sf.net/xins/xins-2.1.exe?download
TAR GZ archive: http://prdownloads.sf.net/xins/xins-2.1.tgz?download
Resources:
Web site: http://xins.sourceforge.net/
XINS demos: http://xins.sourceforge.net/demo.html
Documentation: http://xins.sourceforge.net/documentation.html
User guide: http://xins.sourceforge.net/docs/index.htmlI recommend you implement your web service with JAX-WS 2.0
Axis (both version) are good but why do you want to use something that is not included in JEE API, when Java provide same thing with better performance.
personally try to prevent non standard technologies despite they can be better than core java implementation sometimes.
I don't know Xfire.
the good:
-JAX-WS performance is better than axis,
- you can create your web service simply with annotation.(this means write class and then make it as a service easily)
- support every kind of service invocation(callback,Asynchronous,...)
- architecture is nice (you can operate on SOAP level)
the Bad:
- It is JEE 5 or JSE 6 dependent.
- there is seriously lack of documentation and examples for it, on java web sites and internet. -
DBAShell - New Open Source Project for Oracle DBA's
I'd like to have this project included in the Open Source Oracle tools list at: http://www.oracle.com/technology/community/opensource_projects.html
I've been an Oracle DBA for quite some time (since 7.0.13) and a developer for many years. One of the things I've always wished for was an easier way to set up environment variables for different Oracle Homes and a way to provide passwords to scripts without embedding them in plain-view.
About 3 years ago, I started a set of functions and scripts at my company that did exactly just that and provided many more functions for things like checking database status, running scripts quietly unless errors are detected, running actions in parallel (like fast shutdowns at once, or multiple analyzes), restarting databases in a guaranteed fashion, aliases to common folder locations, etc..
About a month ago, after putting all this time and effort into these scripts and using them in production all this time, I realized I wanted more out of the scripts like support for other databases and thought that it would be best if I gave it new life as an Open Source project.
So that is how http://sourceforge.net/projects/dbashell/ was started. Now its in a second release (DBAShell 0.85) that is more modular and would allow other people to easily add support for other OSs, other Shells, and other Databases.
Here is a description of the project from the latest news item:
DBAShell is a project based around Shell functions and scripts designed to make it easy for DBA's to use Databases in a command line environment. Currently supported is Oracle with ksh and bash on AIX, Solaris, Linux. The code base itself is 3 years old and has been in use in Production environments all of that time.
Features include:
* Automatic setting of all environment variables based on SID requested.
* Manage PATH's and other path like variables for each ORACLE_HOME needed.
* Run scripts with stored passwords (no more hard-coding of passwords!!)
* Automatically set SID based on Script location (makes it easier to share scripts between SID's)
* manage temporary script output and check for oracle errors in output
* check database status and versions from scripts
* stop/start databases in parallel (faster startup)
* compile all database objects
* analyze objects in parallel (Faster analyzes)
* set aliases and variables for common SID areas, etc..
* many helpful commands for common Oracle tasks
Over a thousand people have already downloaded the prior release and more are downloading every hour.
I'm seeking feedback from anybody that would be willing to take a look at the project, trying it out, give me any feedback you have on it, and perhaps even direct me to where I could best promote this project.
I wrote a tutorial that shows at a glance some of the more useful features of DBAShell:
http://sourceforge.net/docman/display_doc.php?docid=34041&group_id=170224
Main site:
http://sourceforge.net/projects/dbashell/
Documentation: http://sourceforge.net/docman/display_doc.php?docid=33704&group_id=170224
Download:
http://prdownloads.sourceforge.net/dbashell/dbashell-0.85.tar.gz?downloadAlways glad to have people thinking about the poor DBA's. Usually, the developers get most of the attention in open source.
-
DBAShell - Open Source project for Oracle DBA's
Ive been an Oracle DBA for quite some time (since 7.0.13) and a developer for many years. One of the things Ive always wished for was an easier way to set up environment variables for different Oracle Homes and a way to provide passwords to scripts without embedding them in plain-view.
About 3 years ago, I started a set of functions and scripts at my company that did exactly just that and provided many more functions for things like checking database status, running scripts quietly unless errors are detected, running actions in parallel (like fast shutdowns at once, or multiple analyzes), restarting databases in a guaranteed fashion, aliases to common folder locations, etc..
About a month ago, after putting all this time and effort into these scripts and using them in production all this time, I realized I wanted more out of the scripts like support for other databases and thought that it would be best if I gave it new life as an Open Source project.
So that is how http://sourceforge.net/projects/dbashell/ was started. Now its in a second release (DBAShell 0.85) that is more modular and would allow other people to easily add support for other OSs, other Shells, and other Databases.
Here is a description of the project from the latest news item:
DBAShell is a project based around Shell functions and scripts designed to make it easy for DBA's to use Databases in a command line environment. Currently supported is Oracle with ksh and bash on AIX, Solaris, Linux. The code base itself is 3 years old and has been in use in Production environments all of that time.
Features include:
* Automatic setting of all environment variables based on SID requested.
* Manage PATH's and other path like variables for each ORACLE_HOME needed.
* Run scripts with stored passwords (no more hard-coding of passwords!!)
* Automatically set SID based on Script location (makes it easier to share scripts between SID's)
* manage temporary script output and check for oracle errors in output
* check database status and versions from scripts
* stop/start databases in parallel (faster startup)
* compile all database objects
* analyze objects in parallel (Faster analyzes)
* set aliases and variables for common SID areas, etc..
* many helpful commands for common Oracle tasks
Over a thousand people have already downloaded the prior release and more are downloading every hour.
I'm seeking feedback from anybody that would be willing to take a look at the project, trying it out, give me any feedback you have on it, and perhaps even direct me to where I could best promote this project.
I wrote a tutorial that shows at a glance some of the more useful features of DBAShell:
http://sourceforge.net/docman/display_doc.php?docid=34041&group_id=170224
Main site:
http://sourceforge.net/projects/dbashell/
Documentation: http://sourceforge.net/docman/display_doc.php?docid=33704&group_id=170224
Download:
http://prdownloads.sourceforge.net/dbashell/dbashell-0.85.tar.gz?downloadAlways glad to have people thinking about the poor DBA's. Usually, the developers get most of the attention in open source.
-
Open Source project - request for interest
Hi,
I know this may not be the most appropriate place for this but I couldnt find anywhere else. The project is due to start up in early 2006. The technology is Java based and supports J2EE. It enables developers to work at a high level and generate apps very quickly and more complex functionality can be built using Java to address requirements.
I thought I would post this here for anyone interested in participating in a new Open Source project for a Java development tool.
I apologise in advance if anyone gets upset over this post - but I thought Java developers should be aware of the project.
Thanks.
Be in at the start of an exciting new Open Source initiative!
If you're a Java developer and you'd be interested in participating in the development of a new UK-based Open Source project then read on.
The project would seek to take an existing, powerful J2EE-based rapid web application development tool on to the next level. Sitting happily alongside other well-known open source names such as Red Hat, MySQL and JBoss, it enables the building and deploying of J2EE-based web applications in a fraction of the time that it would otherwise take to develop them. But the possibilities are only limited by your imagination.
So, if you're interested in contributing to the evolution of this project please email us at [email protected] with your contact details and we will be in touch with you.Thanks for the ponter, I will check it out.
hth,
Sean -
Open Source Project Announcement...
I have started an open source project to build a module for
PHP4 that will allow direct calls to Tuxedo services from
the PHP script, the project name is php-tuxedo.
Think about it for a second... The ability from inside a
PHP web page to directly call already existing Tuxedo
services anywhere in your environment. Just like PHP can
open a database connection to Oracle or Sybase, it would
open a Tuxedo connection as a Tux client to a Tuxedo
middleware environment.
For those who have used PHP, you know how easy it is to
build dynamic web pages. But those pages are mostly limited
to database queries or flat file access for data. With this
project you could call all your existing enterprise Tuxedo
services directly. I believe this would be a very powerful
enhancement to PHP's capabilities.
To those familiar with Tuxedo, you know about how powerful
an implementation of Tux middleware services can be for
departmental and enterprise solutions.
I want to bring these two pieces together.
Project status. The project is in its early infancy, but
some parts are functional. I have successfully built a
client page that uses a STRING buffer to call a service with
tpcall and returns a STRING buffer back. Primitive? Sure,
but this is only the start. I have ideas of how to
implement many other functions and buffer types including
FMLs.
There is much work to do, but if you are interested please
check out http://php-tuxedo.sourceforge.net. There you can
download my first cut and more importantly follow the
project as it progresses. For the really ambitious I would
welcome any testing or development help on the project.
Please note I’m posting this note to several lists I don’t
normally monitor, so I may not see a reply on the list.
Hope to hear from you.
Brian Foddy
[email protected]You probably are able to do this already through Prolifics' XMLink product
http://www.prolifics.com/do/xml.html.
-James
"Brian Foddy" <[email protected]> wrote in message
news:[email protected]...
>
Open Source Project Announcement...
I have started an open source project to build a module for
PHP4 that will allow direct calls to Tuxedo services from
the PHP script, the project name is php-tuxedo.
Think about it for a second... The ability from inside a
PHP web page to directly call already existing Tuxedo
services anywhere in your environment. Just like PHP can
open a database connection to Oracle or Sybase, it would
open a Tuxedo connection as a Tux client to a Tuxedo
middleware environment.
For those who have used PHP, you know how easy it is to
build dynamic web pages. But those pages are mostly limited
to database queries or flat file access for data. With this
project you could call all your existing enterprise Tuxedo
services directly. I believe this would be a very powerful
enhancement to PHP's capabilities.
To those familiar with Tuxedo, you know about how powerful
an implementation of Tux middleware services can be for
departmental and enterprise solutions.
I want to bring these two pieces together.
Project status. The project is in its early infancy, but
some parts are functional. I have successfully built a
client page that uses a STRING buffer to call a service with
tpcall and returns a STRING buffer back. Primitive? Sure,
but this is only the start. I have ideas of how to
implement many other functions and buffer types including
FMLs.
There is much work to do, but if you are interested please
check out http://php-tuxedo.sourceforge.net. There you can
download my first cut and more importantly follow the
project as it progresses. For the really ambitious I would
welcome any testing or development help on the project.
Please note I'm posting this note to several lists I don't
normally monitor, so I may not see a reply on the list.
Hope to hear from you.
Brian Foddy
[email protected] -
Open Source Project Announcement...
I have started an open source project to build a module for
PHP4 that will allow direct calls to Tuxedo services from
the PHP script, the project name is php-tuxedo.
Think about it for a second... The ability from inside a
PHP web page to directly call already existing Tuxedo
services anywhere in your environment. Just like PHP can
open a database connection to Oracle or Sybase, it would
open a Tuxedo connection as a Tux client to a Tuxedo
middleware environment.
For those who have used PHP, you know how easy it is to
build dynamic web pages. But those pages are mostly limited
to database queries or flat file access for data. With this
project you could call all your existing enterprise Tuxedo
services directly. I believe this would be a very powerful
enhancement to PHP's capabilities.
To those familiar with Tuxedo, you know about how powerful
an implementation of Tux middleware services can be for
departmental and enterprise solutions.
I want to bring these two pieces together.
Project status. The project is in its early infancy, but
some parts are functional. I have successfully built a
client page that uses a STRING buffer to call a service with
tpcall and returns a STRING buffer back. Primitive? Sure,
but this is only the start. I have ideas of how to
implement many other functions and buffer types including
FMLs.
There is much work to do, but if you are interested please
check out http://php-tuxedo.sourceforge.net. There you can
download my first cut and more importantly follow the
project as it progresses. For the really ambitious I would
welcome any testing or development help on the project.
Please note I’m posting this note to several lists I don’t
normally monitor, so I may not see a reply on the list.
Hope to hear from you.
Brian Foddy
[email protected]Always glad to have people thinking about the poor DBA's. Usually, the developers get most of the attention in open source.
Maybe you are looking for
-
How do I find the devices registered on my icloud account
I have made a number of upgades to my PCs and use a different logon for Icloud as I was an ME client. I cannot access icloud on my laptop using my ME logine. It does work for my apple account. How do I deactivate old devices? They are no longer in us
-
Embed a font in one SWF use in another?
Long version: I've got a "player" app that I've built that shows content from various XML files. I have certain common fonts embedded in it (Verdana, Arial, Times, etc.) that it uses to display text. Now, I've got a client with a special symbol font
-
Trouble Trying to Fullscreen Videos
My Mac won't fullscreen any video I try to watch (YouTube, Hulu, Facebook, etc.). It either is a blank screen or it's a frozen screenshot. My FlashPlayer is updated and I've tried on both Safari and Google Chrome. Suggestions?
-
Archiving print document and the FICA document is not closed yet
Hi SAP, I Am testing the archiving object ISU_PRDOCL and ISU_PRDOCH and I could archive a print document for which the FICA document is not sold (still Open Item). is it a bug or the standard is made like this or do we have to implement an OSS note f
-
Need to re-install Acrobat Pro 10.0.
Need to re-install Acrobat Pro 10.0. I have the original License Certificate. Can I donwload from the Product Trials (Acrobat Pro XI) to get this started?