Is JavaFX8 supported on Windows XP SP3

Hi,
Currently JavaFX-b102 demos fail to render correctly on Windows XP SP3 (running in VMware). JavaFX 2.2.5 samples work correctly.
Is this a bug or will Windws XP support be dropped in JavaFX8 ?
Best Regards,
Jim

It is not a bug. It is not supported in javafx8.
https://javafx-jira.kenai.com/browse/RT-31066

Similar Messages

Does Firefox support Windows XP SP3?

Now that we are in April of 2015, Will Firefox provide updates and patches for Windows XP SP3 users? Google Chrome supported XP till April 2015, I cannot afford to buy a new computer and am looking for a new browser for my Windows XP SP3 laptop.

About the only Windows requirements changes I have seen for near future is that when Win64 for Release (as early as Fx 38.0) finally comes out it will need 64-bit Windows 7 and 8.x at minimum. The 64-bit XP, Vista and Servers are not supported.

Problems with Windows XP SP3 in Boot Camp

Hi,
I have recently received a 21.5" iMac; it is the higher-end of the 21.5" standard configurations. The problems I am having, I believe, specifically relate to drivers.
Firstly, I get no sound whatsoever in Windows XP SP3 (boot camp); I have tried removing and reinstalling the drivers from the Snow Leopard install disc, but no success. I have no yellow question marks in the device manager window, but the absence of audio still persists.
Secondly, I cannot gain access to the special functions of the Apple wireless keyboard in Windows XP SP3 via Boot Camp. Again, I have tried reinstalling the drivers, but no success. I have read an Apple support document which states that the keys are only supported on late 2009 Macs; I own one of these Macs, so that cannot be the problem.

Problems with Windows XP SP3 in Boot Camp
Boot Camp forums are here: http://discussions.apple.com/category.jspa?categoryID=237

I have windows xp sp3, run Mcaffee security software- when I open I-tunes it does open however it will not connet to the I-tunes store. I-Tunes diagnostic indicates that it does connect to internet but the secure link to I-Tunes fails.

I have windows xp sp3, run Mcaffee security software- when I open I-Tunes it does open however it will not connet to the I-Tunes store. I-Tunes diagnostic indicates that it does connect to the internet but the secure ling to I-Tunes fails. I-Tunes diagnostic attached. Hope some one can help. Microsoft Windows XP Professional Service Pack 3 (Build 2600) Dell Inc. MP061 iTunes 11.0.2.26 QuickTime 7.7.3 FairPlay 2.3.31 Apple Application Support 2.3.3 iPod Updater Library 10.0d2 CD Driver 2.2.3.0 CD Driver DLL 2.1.3.1 Apple Mobile Device 6.1.0.13 Apple Mobile Device Driver 1.64.0.0 Bonjour 3.0.0.10 (333.10) Gracenote SDK 1.9.6.502 Gracenote MusicID 1.9.6.115 Gracenote Submit 1.9.6.143 Gracenote DSP 1.9.6.45 iTunes Serial Number 0012B5500B576CC8 Current user is an administrator. The current local date and time is 2013-04-28 10:27:11. iTunes is not running in safe mode. WebKit accelerated compositing is enabled. HDCP is not supported. Core Media is supported. Video Display Information ATI Mobility Radeon X1400 **** External Plug-ins Information **** No external plug-ins installed. iPodService 11.0.2.26 is currently running. iTunesHelper 11.0.2.26 is currently running. Apple Mobile Device service 3.3.0.0 is currently running. **** Network Connectivity Tests **** Network Adapter Information Adapter Name: {7282B8D2-078A-4414-82D6-A506F9C935D0} Description: WiMAX Network Adapter - McAfee Core NDIS Intermediate Filter Miniport IP Address: 0.0.0.0 Subnet Mask: 0.0.0.0 Default Gateway: DHCP Enabled: Yes DHCP Server: 255.255.255.255 Lease Obtained: Wed Feb 13 12:30:29 2013 Lease Expires: Mon Jan 18 21:14:07 2038 DNS Servers: Adapter Name: {9CE46F79-8015-4C15-A074-B1ACA4388E56} Description: Sierra Wireless Network Adapter - McAfee Core NDIS Intermediate Filter Miniport IP Address: 0.0.0.0 Subnet Mask: 0.0.0.0 Default Gateway: DHCP Enabled: Yes DHCP Server: Lease Obtained: Mon Jan 18 21:14:07 2038 Lease Expires: Mon Jan 18 21:14:07 2038 DNS Servers: Adapter Name: {1A876FC9-50B6-4101-8E4F-838AF1D1CB32} Description: Dell Wireless 1390 WLAN Mini-Card - McAfee Core NDIS Intermediate Filter Miniport IP Address: 0.0.0.0 Subnet Mask: 0.0.0.0 Default Gateway: DHCP Enabled: Yes DHCP Server: Lease Obtained: Mon Jan 18 21:14:07 2038 Lease Expires: Mon Jan 18 21:14:07 2038 DNS Servers: Adapter Name: {E64A2DD8-7A18-4784-8DC0-08B143E504A7} Description: Broadcom 440x 10/100 Integrated Controller - McAfee Core NDIS Intermediate Filter Miniport IP Address: 0.0.0.0 Subnet Mask: 0.0.0.0 Default Gateway: DHCP Enabled: Yes DHCP Server: 10.0.40.20 Lease Obtained: Thu Aug 23 15:54:15 2012 Lease Expires: Thu Aug 23 17:54:15 2012 DNS Servers: Adapter Name: {2A9F97F5-D693-427F-BA40-9C3AA36937B1} Description: WAN (PPP/SLIP) Interface IP Address: 107.42.83.109 Subnet Mask: 255.255.255.255 Default Gateway: 107.42.83.109 DHCP Enabled: No DHCP Server: Lease Obtained: Wed Dec 31 18:00:00 1969 Lease Expires: Wed Dec 31 18:00:00 1969 DNS Servers: 66.1.77.7 68.29.73.7 Active Connection: Mobile Connected: Yes Online: Yes Using Modem: Yes Using LAN: No Using Proxy: No Firewall Information Windows Firewall is on. iTunes is enabled in Windows Firewall. Connection attempt to Apple web site was unsuccessful. The network connection timed out. Basic connection to the store failed. The network connection timed out. Connection attempt to Gracenote server was successful. The network connection timed out. Last successful iTunes Store access was 2013-04-16 10:14:47.

Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time.

Windows XP SP3 does not recognize iPod Classic

I have an older computer with Windows XP SP3 and iTunes 10.2.2. iTunes does not recognize (load) my iPod Classic (160Gb model) when I plug it in. The iPod lights up and charges fine, but it does not appear in the left menu bar in iTunes.
I have an old iPod Shuffle that loads into iTunes just fine.
I have tried a number of remedies:
Updated the computer to XP Service Pack 3.
Completely uninstalled and reinstalled iTunes twice.
Reset the iPod Classic several times.
Tried plugging the iPod into different USB ports on the computer.
My music library is on an external drive, so I was able to borrow a computer (Win7) and use it to load the music into my iPod. But this isn't a permanent solution.
Does anyone know of a potential fix that I haven't considered?
Thanks in advance.

Try restarting your Apple Mobile Device Service, kent:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
(Classics also use AMDS to a greater or lesser degree, so trouble with the service or other aspects of Apple Mobile Device Support can cause some grief with a Classic connection.)

ITunes 10.5.3 Installation on Windows XP SP3: hanging on "Registering iTunes Automation Server"

I have uninstalled successfully iTunes 10.5.1 from my notebook and reinstalled iTunes 10.5.3.3. Unfortunately, in reinstallation process, iTunes is hanging on "Registering iTunes Automation Server" for over 3 hours!!!!!!!! Quicktime, Safari, Bonjour, Apple Application Support, Apple Mobile Device Support, Apple Software Update are all reinstalled successfully!!! WHAT's the problem for my notebook? How to overcome this issue??? Please help me !!!!!!!!!!!!!!!!!!!!
System:Windows XP SP3
Apple iPhone 4S, iPad 2, iPod Classic

Noboday has ideas about this issue???

Windows XP SP3 for my mac book pro

I want to know if i can install windows XP SP3 on my mac book pro ( new one from yesterday) version 10.6.7 ?

No See here: http://support.apple.com/kb/HT4410
You could use a VM like Parallels, Fusion, or VirtualBox to install XP SP3.

HP Laserjet Pro MFP M125A " A Fatal Error Occured Preventing Product Use" on Window XP SP3

Dear Friends,
I really need your help on this issues, recently company that i been working buy 19 Unit of HP Laserjet Pro MFP M125A printer to be install at our 19 branches. All of our branches is using Window XP SP3 and the spec is exceed the minimum requirement stated at the box of the HP Printers which means by rights, it should be no problems.
However, I sent and setup the printer at 4 branches only 1 is a success. others 3 centre is showing the same errors which is A Fatal Error Occured Preventing Product Use. I been trying to install using original CD provided by HP and driver provided at HP Support also given the same errors. The 1 Centre that OK PC spec is almost the same as the others 3 and all using default programs and software. So i dont knows what really is the problem.
This is the things i have done in hoping to successfully install the driver but WITH NO SUCCESS:
Clear temp file, disk cleanup, defragment disk and restart PC.
Reinstall Windows SP3 and restart PC.
Install basic driver only and using control panel > device and printer > add printer (Select Driver Manually). (See Pic Below)
Repair windows using original windows XP SP3 CD.
Re-Check for USB.INF file.
Repair Registry with reg cure.
Uninstall USB support and etc (Google), then re-install the printers.
Uninstall Antivirus, disable all startup and services.
Install using FULL DRIVER, BASIC DRIVER AND DRIVER MANUAL.
Sometime when running the installer, it will prompt the below error signature and HP installer will loading quite long and then crash, but others PC don't have this errors, it straight away to the installation menu until DETECTING PRINTER until 99% and shows errors "A Fatal Error Occured Preventing Product Use".
It seems that almost everythings i try cannot make the printer driver to be install. However, the SCAN driver is install successfully. Currently the printer only can PHOTOCOPY AND SCAN, without being able to print.
Please anyone which facing similiar issues to HELP ME. anythings i can do, to install the printer DRIVER.
THANKS!

Hi @gendit ,
I see that you are having issues installing several Laserjet Pro MFP M125A printers on several Windows XP computers. You are getting "A Fatal Error Occured Preventing Product Use". I can help you with this.
What version of .NetFrameworks do you have? Check Your DOTNET.
You might have to run the Windows Updates. I would update the .Netframeworks to 4.0.
I believe HP software piggy backs Internet Explorer. Should have at least Internet Explorer 6.0.
Please try these steps, most likely the wrong driver is getting installed, giving you the Fatal error.
Disconnect the USB cable.
Uninstall the printer software from the CD.
Run the software again, immediately after connecting the USB cable, follow this document to update the driver before it errors out again. A Fatal Error Displays During Software Installation.
If the issue persists, here is a document with some different steps to try.
A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows.
Please provide in detail the results if you are still having issues.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Accessing physical floppy disk drive from Windows 8.1 host machine to Windows XP SP3 hyper-v?

Hi there!
Could someone help up me? I just wanted to ask if it's possible for a hyper-v to access a physical "floppy diskette" drive?
Here's my setup: I have a Windows 8.1 as my host and Windows XP SP3 as the virtual machine. I would need to access the contents of the physical floppy diskette drive from the Windows XP SP3 vm. This is needed, because, currently our customer is still using
floppy disk drives, to most of their in-house applications. I tried to open Drive A: inside Windows XP SP3 VM while the physical diskette from the Windows 8.1 is inserted. But then again, it cannot directly access the contents. Also, I tried to use "virtual
floppy drives" and copy the files from the diskette. But for some reason, their applications do not support it. I did check device manager in Windows XP SP3 vm, but i cannot see the "Universal Serial Bus Controllers" option inside the VM.
Please help!!! Thank you!
All the best,
MS CAMPer

HI Carey, thanks for this, But this is under System Center Virtual Machine Manager. I already saw this a while ago.
Anyway, is there a way for Windows XP VM to access a physical floppy diskette drives inserted to Windows 8.1 host machine? I dont intend to use Virtual floppy disks. Only Physical ones.
Please please. Need your help guys! :( Thank you!

Can i install oracle BI enterprise edition on windows xp sp3?

hi, i downloaded oracle BIEE 10.1.3.4 for windows x86, can i install it on windows xp sp3. must it be on a server operating system?
thanks

Read the "System Requirements and Supported Platforms" document:
http://download.oracle.com/docs/cd/E10415_01/doc/nav/portal_1.htm

Is WMF3 or WMF4 supported in Exchange 2010 SP3 UR5 installed on Server 2008 R2 SP1?

We'd like to upgrade WMF (aka powershell) on our Exchange 2010 servers but I haven't been able to find any updated information on support with the most recent servicepack/update rollup.
Is installing WMF3 or WMF4 supported on Server 2008 R2 SP1 w/ Exchange 2010 SP3 UR5?

WindowsPowerShell 3.0 is supported. Haven't seen 4.0 running for exchange 2010 on 2008 R2
http://blogs.technet.com/b/heyscriptingguy/archive/2013/11/30/weekend-scripter-wmf-powershell-and-exchange-server-compatibility.aspx
http://blog.crayon.no/blogs/janegil/archive/2013/11/17/how_2D00_to_2D00_install_2D00_windows_2D00_powershell_2D00_4_2D00_0.aspx
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
Gulab,
Where did you read that WMF3 is supported on Exchange 2010 SP3 on Server 2008 R2?
Neither of the links you pasted suggest that and in fact explicitly say "There has been no testing with ExchangeServer 2010 SP3 and WMF 3.0 installed on Windows Server 2008 R2."
My Bad, that was TYPO...
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

How do i install windows XP sp3 using Bootcamp?

Have recently purchased Windows xp sp3 home edition , but i am having trouble installing it. It just keeps repeating itself , what i mean by that is it starts to install then it tells me to restart and then it does exactly the same part of installing again , then it tells me to restart etc. I am not really getting anywhere.

SP3 has, for some unknown reason, been a pain with installing, with sometimes totally wiping out the Mac partition (not asking where to install).
I'd jump to 7, along with how XP even with SP3 has 'limited' enterprise support now, even though it will get updates I think until 2014.
That, or try to find SP2.

Framemaker 7.2 and Windows XP SP3

For any Framemaker 7.2 users out there who does not already know, Framemaker 7.2 will not work with Windows XP SP3.
A security file in Win XP SP3 causes problems with OLE graphics imported into FM. The problem will only rear its head when you try to save the document and the following error box appears:
"An Internal error occurred while writing imported graphics in this document. The file has been saved, but has lost some image data. Please report this fault to Adobe Technical Support."
Why only OLE imports are affect is beyond my skills as I would expect this problem with referenced imports. Adobe are not aware of this concern and have no fix. There are a couple of fixes, but neither are ideal.
1. Remove all OLE files and import them as referenced files, then save.
2. Roll back Windows XP to SP2. (This is what I had to do as I have a vast quantity of documents with OLE files.)
If anybody has further info please feel free to discuss.

Andy,
It's just OLE, not FM7.2, that is the problem with the SP3 fix. This
has been reported in the Forums numerous times. Using OLE with FM has
consistently been a "not recommended" feature and Adobe is aware of
the issue.
As you point out, the only two fixes known, to date, are either import
by reference or rollback to SP2.

Windows XP SP3 can't authenticate in 802.1x

Hi all,
I'm trying to get working a fresh install with 802.1x in it. I have a serious issue with Windows XP SP3 not authenticating at all... I can see (with a Wireshark) EAPoL Start messages going out from the host, but nothing happens after. The switch is pretending that it has a timeout on dot1x exchanges. We don't have any issue with Windows 7 at all !!!!
I'm giving you details about the setup :
Switches : Cisco switching architecture (IOS IP Services K9 12.2(55)SE)
Authentication Server : Cisco Secure ACS 4.2
Directories : Microsoft Active Directory and OpenLDAP for the directories
PKI : External (opensource)
Clients : Windows XP SP3 and a very few Windows 7
EAP Method for the moment : PEAP MSCHAPv2
Concerning switches, typical config is the following (only necessary things appear) :
swi-test-802.1x#sh run
Building configuration...
Current configuration : 6481 bytes
aaa new-model
aaa group server radius ACS
server X.X.X.X auth-port 1645 acct-port 1646
deadtime 60
aaa authentication login ACS_RADIUS group ACS local
aaa authentication dot1x default group ACS local
aaa authorization exec ACS_RADIUS group ACS local
aaa authorization network default group ACS
aaa accounting dot1x default start-stop group ACS
aaa accounting exec ACS_RADIUS start-stop group ACS
aaa accounting network ACS_RADIUS start-stop group ACS
aaa session-id common
ip device tracking
dot1x system-auth-control
interface FastEthernet0/X
description Typical FlexAuth port 802.1x
switchport mode access
switchport voice vlan 160
ip access-group Acl_Default_Acl in
authentication event fail action next-method
authentication event server dead action authorize vlan 99
authentication event no-response action authorize vlan 99
authentication host-mode multi-domain
authentication order mab dot1x
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication timer inactivity server
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
ip access-list extended Acl_Default_Acl
permit ip any any
radius-server host X.X.X.X auth-port 1645 acct-port 1646 key XXX
radius-server vsa send accounting
radius-server vsa send authentication
end
If I'm using Windows 7, no problem...
I've tried to modify different registry keys concerning authMode, SupplicantMode (twice applicable but only right until XP SP2), BlockTime for reauth, following everytime Microsoft recommandations and the different published kb...
I've tried with GPO for a global change or modifying XML template of the interface, but nothing changes...
I'm giving you the debugs (radius authentication and dot1x events) :
swi-test-802.1x#
swi-test-802.1x#
*Mar 1 01:19:25.727: dot1x-ev(Fa0/1): Interface state changed to UP
*Mar 1 01:19:25.735: dot1x-ev:DOT1X Supplicant not enabled on FastEthernet0/1
*Mar 1 01:19:26.230: dot1x-ev(Fa0/1): Interface state changed to DOWN
*Mar 1 01:19:26.230: dot1x-ev:dot1x_supp_port_down: No DOT1X subblock found on FastEthernet0/1
*Mar 1 01:19:28.327: dot1x-ev(Fa0/1): Interface state changed to UP
*Mar 1 01:19:28.336: dot1x-ev:DOT1X Supplicant not enabled on FastEthernet0/1
*Mar 1 01:19:28.697: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
*Mar 1 01:19:29.510: %AUTHMGR-5-START: Starting 'mab' for client (60eb.699a.0e0f) on Interface Fa0/1 AuditSessionID 0AF80215000000030048C250
*Mar 1 01:19:29.510: RADIUS/ENCODE(0000000B):Orig. component type = DOT1X
*Mar 1 01:19:29.510: RADIUS(0000000B): Config NAS IP: 0.0.0.0
*Mar 1 01:19:29.510: RADIUS/ENCODE(0000000B): acct_session_id: 11
*Mar 1 01:19:29.510: RADIUS(0000000B): sending
*Mar 1 01:19:29.510: RADIUS/ENCODE: Best Local IP-Address 10.248.2.21 for Radius-Server 10.248.64.20
*Mar 1 01:19:29.510: RADIUS(0000000B): Send Access-Request to 10.248.64.20:1645 id 1645/19, len 206
*Mar 1 01:19:29.510: RADIUS: authenticator 3C AE B6 01 13 26 4E 77 - 94 33 B1 40 B7 A6 06 F8
*Mar 1 01:19:29.510: RADIUS: User-Name           [1]   14 "60eb699a0e0f"
*Mar 1 01:19:29.510: RADIUS: User-Password       [2]   18 *
*Mar 1 01:19:29.510: RADIUS: Service-Type        [6]   6   Call Check                [10]
*Mar 1 01:19:29.510: RADIUS: Framed-MTU          [12] 6   1500
*Mar 1 01:19:29.510: RADIUS: Called-Station-Id   [30] 19 "00-1A-6D-FE-AA-83"
*Mar 1 01:19:29.510: RADIUS: Calling-Station-Id [31] 19 "60-EB-69-9A-0E-0F"
*Mar 1 01:19:29.510: RADIUS: Message-Authenticato[80] 18
*Mar 1 01:19:29.510: RADIUS:   2F C3 4E 65 14 AF D3 8E B9 E5 29 C3 28 13 C6 B8             [ /Ne)(]
*Mar 1 01:19:29.510: RADIUS: EAP-Key-Name        [102] 2   *
*Mar 1 01:19:29.510: RADIUS: Vendor, Cisco       [26] 49
*Mar 1 01:19:29.510: RADIUS:   Cisco AVpair       [1]   43 "audit-session-id=0AF80215000000030048C250"
*Mar 1 01:19:29.510: RADIUS: NAS-Port-Type       [61] 6   Ethernet                  [15]
*Mar 1 01:19:29.510: RADIUS: NAS-Port            [5]   6   50001
*Mar 1 01:19:29.510: RADIUS: NAS-Port-Id         [87] 17 "FastEthernet0/1"
*Mar 1 01:19:29.510: RADIUS: NAS-IP-Address      [4]   6   10.248.2.21
*Mar 1 01:19:29.519: RADIUS(0000000B): Started 5 sec timeout
*Mar 1 01:19:29.527: RADIUS: Received from id 1645/19 10.248.64.20:1645, Access-Reject, len 50
*Mar 1 01:19:29.527: RADIUS: authenticator B0 3B E5 8F 22 D1 C1 66 - F6 8F 1A 7E 88 49 AA BB
*Mar 1 01:19:29.527: RADIUS: Reply-Message       [18] 12
*Mar 1 01:19:29.527: RADIUS:   52 65 6A 65 63 74 65 64 0A 0D          [ Rejected]
*Mar 1 01:19:29.527: RADIUS: Message-Authenticato[80] 18
*Mar 1 01:19:29.527: RADIUS:   91 5F 64 12 73 8E 76 0C 31 DD 2B B7 2E EC 6E BA          [ _dsv1+.n]
*Mar 1 01:19:29.527: RADIUS(0000000B): Received from id 1645/19
*Mar 1 01:19:29.527: RADIUS/DECODE: Reply-Message fragments, 10, total 10 bytes
*Mar 1 01:19:29.527: %MAB-5-FAIL: Authentication failed for client (60eb.699a.0e0f) on Interface Fa0/1 AuditSessionID 0AF80215000000030048C250
*Mar 1 01:19:29.527: %AUTHMGR-7-RESULT: Authentication result 'no-response' from 'mab' for client (60eb.699a.0e0f) on Interface Fa0/1 AuditSessionID 0AF80215000000030048C250
*Mar 1 01:19:29.527: %AUTHMGR-7-FAILOVER: Failing over from 'mab' for client (60eb.699a.0e0f) on Interface Fa0/1 AuditSessionID 0AF80215000000030048C250
*Mar 1 01:19:29.527: dot1x-ev(Fa0/1): Couldn't find the supplicant in the list
*Mar 1 01:19:29.527: dot1x-ev(Fa0/1): Sending create new context event to EAP for 0x9E000002 (60eb.699a.0e0f)
*Mar 1 01:19:29.535: dot1x-ev(Fa0/1): Created a client entry (0x9E000002)
*Mar 1 01:19:29.535: dot1x-ev(Fa0/1): Dot1x authentication started for 0x9E000002 (60eb.699a.0e0f)
*Mar 1 01:19:29.535: %AUTHMGR-5-START: Starting 'dot1x' for client (60eb.699a.0e0f) on Interface Fa0/1 AuditSessionID 0AF80215000000030048C250
*Mar 1 01:19:29.535: dot1x-ev(Fa0/1): Sending EAPOL packet to 60eb.699a.0e0f
*Mar 1 01:19:29.535: dot1x-ev(Fa0/1): Role determination not required
*Mar 1 01:19:29.535: dot1x-ev(Fa0/1): Sending out EAPOL packet
*Mar 1 01:19:30.290: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
*Mar 1 01:19:39.828: dot1x-ev(Fa0/1): Sending EAPOL packet to 60eb.699a.0e0f
*Mar 1 01:19:39.828: dot1x-ev(Fa0/1): Role determination not required
*Mar 1 01:19:39.828: dot1x-ev(Fa0/1): Sending out EAPOL packet
*Mar 1 01:19:50.113: dot1x-ev(Fa0/1): Sending EAPOL packet to 60eb.699a.0e0f
*Mar 1 01:19:50.113: dot1x-ev(Fa0/1): Role determination not required
*Mar 1 01:19:50.113: dot1x-ev(Fa0/1): Sending out EAPOL packet
*Mar 1 01:20:00.414: dot1x-ev(Fa0/1): Received an EAP Timeout
*Mar 1 01:20:00.414: %DOT1X-5-FAIL: Authentication failed for client (60eb.699a.0e0f) on Interface Fa0/1 AuditSessionID
*Mar 1 01:20:00.414: dot1x-ev(Fa0/1): Sending event (2) to Auth Mgr for 60eb.699a.0e0f
*Mar 1 01:20:00.414: %AUTHMGR-7-RESULT: Authentication result 'no-response' from 'dot1x' for client (60eb.699a.0e0f) on Interface Fa0/1 AuditSessionID 0AF80215000000030048C250
*Mar 1 01:20:00.414: dot1x-ev(Fa0/1): Received Authz fail for the client 0x9E000002 (60eb.699a.0e0f)
*Mar 1 01:20:00.414: dot1x-ev(Fa0/1): Deleting client 0x9E000002 (60eb.699a.0e0f)
*Mar 1 01:20:00.414: %AUTHMGR-7-FAILOVER: Failing over from 'dot1x' for client (60eb.699a.0e0f) on Interface Fa0/1 AuditSessionID 0AF80215000000030048C250
*Mar 1 01:20:00.414: %AUTHMGR-7-NOMOREMETHODS: Exhausted all authentication methods for client (60eb.699a.0e0f) on Interface Fa0/1 AuditSessionID 0AF80215000000030048C250
*Mar 1 01:20:00.414: %AUTHMGR-5-VLANASSIGN: VLAN 99 assigned to Interface Fa0/1 AuditSessionID 0AF80215000000030048C250
*Mar 1 01:20:00.422: dot1x-ev:Delete auth client (0x9E000002) message
*Mar 1 01:20:00.422: dot1x-ev:Auth client ctx destroyed
*Mar 1 01:20:00.422: dot1x-ev:Aborted posting message to authenticator state machine: Invalid client
*Mar 1 01:20:00.733: %AUTHMGR-5-SUCCESS: Authorization succeeded for client (Unknown MAC) on Interface Fa0/1 AuditSessionID 0AF80215000000030048C250
*Mar 1 01:20:00.733: RADIUS/ENCODE(0000000B):Orig. component type = DOT1X
*Mar 1 01:20:00.733: RADIUS(0000000B): Config NAS IP: 0.0.0.0
*Mar 1 01:20:00.733: RADIUS/ENCODE: Best Local IP-Address 10.248.2.21 for Radius-Server 10.248.64.20
*Mar 1 01:20:00.733: RADIUS(0000000B): Started 5 sec timeout
*Mar 1 01:20:00.741: RADIUS: Received from id 1646/9 10.248.64.20:1646, Accounting-response, len 20
swi-test-802.1x#
swi-test-802.1x#
If anyone has an idea. Another thiong to mention, hosts have a Trend OfficeScan solution for Host protection, but the same on Windows 7 and everything is OK.
Thanks for your precious help.
Pierre-Louis

Hi Pierre-Louis,
A couple of questions here:
-We have a voice vlan defined for the port and multi-domain config.During your tests, do you have the PC connected behind an IP Phone?
-Which authentication method do you want to go for PC/IP phone?
-Whats the IP Phone model/vendor ?
In the logs , we have an Access-Reject for the client MAB auth attempt and then failover to dot1x auth.However, I dont see a Phone MAC in the logs.
On the switch debug, we see several EAPOL packets to client 60eb.699a.0e0f, which seems a Quanta computer based on the MAC vendor.
However no EAPOL packets seen from client side.You did indicate seeing an EAPOL Start from the host PC on a sniffer trace.
-Are you sniffing on the client adapter itself or the switchport to which client is connected?
-If we have an IP phone inbetween, do you also see the EAPOL start packet from the client when sniffing on the switchport ?
Windows XP ,SP3 has some changes as compared to earlier SP versions:
http://support.microsoft.com/kb/949984
The following output would help to further isolate on problem.You will need to ensure that we have timesync between sniffer traces and debug logs for correlation.
On switch, save logging output of:
debug radius
debug dot1x all
debug authentication all
debug authentication feature mab_pm all
debug authentication feature mda all
debug authentication feature voice all
Simultaneously you can capture sniffer trace by spanning switch port interface to which Phone/PC is connected.Please don't use any filters during the sniffer capture.
After above steps please do a shut/no shut for tested port interface and replicate the problem with Win XP SP3.
Following the test, you can also obtain the output of "show auth sessions int
HTH,
Alex

I have adobe design std. 6 i wanted to install photoshop and acrobat pro on my windows xp sp3

i have adobe design std. 6 i wanted to install photoshop and acrobat pro on my windows xp sp3. i am not able to install acrobat it is showing folowing error. my email id is [email protected]
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DW024, DW065 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 2 warning(s)
WARNING: DW024: The payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0 requires a UI parent with following specification:
Family: Photoshop
ProductName: Adobe Photoshop CS6 Core_x64
This parent relationship is not satisfied, because this payload is not present in this session.
WARNING: DW065: Display requirements not met for {0327A4BF-62BF-48BB-8928-B971B749E9E1} Creative Suite 6 Design Standard 6.0.0.0
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1406.Could not write value DisableExceptionChainValidation to key \SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\Acrobat.exe. Verify that you have sufficient access to that key, or contact your support personnel.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1406.Could not write value DisableExceptionChainValidation to key \SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\Acrobat.exe. Verify that you have sufficient access to that key, or contact your support personnel.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed

Hi Rizwan,
Please refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5 -cs5.html for information on how to review your installation logs

Is JavaFX8 supported on Windows XP SP3

Similar Messages

Maybe you are looking for